We demonstrate a high optoelectronic performance and application potential of our random network, with subwavelength diameter, ultralong, and high‐quality silver nanowires, stabilized on a substrate with a UV binder. Our networks show very good optoelectronic properties, with the single best figure of merit of ∼1686, and excellent stability under harsh mechanical strain, as well as thermal, and chemical challenge. Our network transparency strongly exceeds the simple shading limit. We show that this transmission enhancement is due to plasmonic refraction, which in an effective medium picture involves localized plasmons, and identify the inhomogeneous broadening as the key factor in promoting this mechanism. Such networks could become a basis for a next generation of ultrahigh‐performance transparent conductors.
We report on the theoretical investigation of plasmonic resonances in metallic Möbius nanorings. Half‐integer numbers of resonant modes are observed due to the presence of an extra phase π provided by the topology of the Möbius nanostrip. Anomalous plasmon modes located at the non‐orientable surface of the Möbius nanoring break the symmetry that exist in conventional ring cavities, thus enable far‐field excitation and emission as bright modes. The far‐field resonant wavelength as well as the feature of half‐integer mode numbers is constant to the change of charge distribution on the Möbius nanoring due to the topology of Möbius ring. Owing to the ultra‐small mode volume induced by the remaining dark feature, an extremely high sensitivity as well as a remarkable figure of merit is obtained in our numerical calculations for sensing performance. The topological metallic nanostructure provides a novel platform for the investigation of localized surface plasmon modes exhibiting unique phenomena for potential plasmonic applications.
Efficient amplification of spoof surface plasmon polaritons (SPPs) is proposed at microwave frequencies by using a subwavelength‐scale amplifier. For this purpose, a special plasmonic waveguide composed of two ultrathin corrugated metallic strips on top and bottom surfaces of a dielectric substrate with mirror symmetry is presented, which is easy to integrate with the amplifier. It is shown that spoof SPPs are able to propagate on the plasmonic waveguide in broadband with low loss and strong subwavelength effect. By loading a low‐noise amplifier chip produced by the semiconductor technology, the first experiment is demonstrated to amplify spoof SPPs at microwave frequencies (from 6 to 20GHz) with high gain (around 20dB), which can be directly used as a SPP amplifier device. The features of strong field confinement, high efficiency, broadband operation, and significant amplification of the spoof SPPs may advance a big step towards other active SPP components and integrated circuits.
This article presents a novel III‐V on silicon laser. This work exploits the phenomenon that a passive silicon cavity, side‐coupled to a III‐V waveguide, will provide high and narrow‐band reflectivity into the III‐V waveguide: the resonant mirror. This results in an electrically pumped laser with a threshold current of 4 mA and a side‐mode suppression ratio up to 48 dB.
The terahertz (THz) radiation from InGaN/GaN dot‐in‐a‐wire nanostructures has been investigated. A submicrowatt THz signal is generated with just ten vertically stacked InGaN quantum dots (QDs) in each GaN nanowire. Based on the experimental results and analysis, a single quantum wire is expected to generate an output power as high as 10 pW, corresponding to 1 pW per dot. These structures are among the most efficient three‐dimensional quantum‐confined nanostructures for the THz emission. By applying a reverse bias along the wires in a light‐emitting device (LED) consisting of such nanostructures, the THz output power is increased more than fourfold. Based on THz and photoluminescence (PL) experiments, the mechanism for the THz emission is attributed to dipole radiation induced by internal electric fields and enhanced by external fields.
Multi scale hierarchical structures underpin mechanical, optical, and wettability behavior in nature. Here we present a novel approach which can be used to mimic the natural hierarchical patterns in a quick and easy maskless fabrication. By using two‐beam interference lithography with angle‐multiplexed exposures and scanning, we have successfully printed large‐area complex structures having a cascading resolution and 3D surface profiles. By precisely controlling the exposure dose we have demonstrated a capability to create different 3D textured surfaces having comparable aspect ratio with period spanning from 4 μm to 300 nm (more than one order of magnitude) and the height spanning from 0.9 μm to 40 nm, respectively. Up to three levels of biomimetic hierarchical structures were obtained that show several natural phenomena: superhydrophobicity, iridescence, directionality of reflectivity, and polarization at different colors.
Light manipulation is paramountly important to the fabrication of high‐performance optoelectronic devices such as solar cells and photodetectors. In this study, a high‐performance near‐infrared light nanophotodetector (NIRPD) was fabricated based on a germanium nanoneedles array (GeNNs array) with strong light confining capability, and single‐layer graphene (SLG) modified with heavily doped indium tin oxide nanoparticles (ITONPs), which were capable of inducing localized surface plasmon resonance (LSPR) under NIR irradiation. An optoelectronic study shows that after modification with ITONPs the device performance including photocurrent, responsivity and detectivity was considerably improved. In addition, the ITONPs@SLG/GeNNs array NIRPD was able to monitor fast‐switching optical signals, the frequency was as high as 1 MHz, with very fast response rates. Theoretical simulations based on finite‐element method (FEM) revealed that the observed high performance was not only due to the strong light‐confining capability of the GeNNs array, but also due to the plasmonic ITONPs‐induced hot electron injection. The above results suggest that the present NIRPD will have great potential in future optoelectronic devices application.
Dewetting of thin metal films is one of the most widespread method for functional plasmonic nanostructures fabrication. However, simple thermal‐induced dewetting does not allow to control degree of nanostructures order without additional lithographic process steps. Here we propose a novel method for lithography‐free and large‐scale fabrication of plasmonic nanostructures via controllable femtosecond laser‐induced dewetting. The method is based on femtosecond laser surface pattering of a thin film followed by a nanoscale hydrodynamical instability, which is found to be very controllable under specific irradiation conditions. We achieve control over degree of nanostructures order by changing laser irradiation parametrs and film thickness. This allowed us to exploit the method for the broad range of applications: resonant light absorbtion and scattering, sensing, and potential improving of thin‐film solar cells.
Surface‐plasmon‐polariton waves are two‐dimensional electromagnetic surface waves that propagate at the interface between a metal and a dielectric. These waves exhibit unusual and attractive properties, such as high spatial confinement and enhancement of the optical field, and are widely used in a variety of applications, such as sensing and subwavelength optics. The ability to precisely control the spatial and spectral properties of the surface‐plasmon wave is required in order to support the growing interest in both research and applications of plasmonic waves, and to bring it to the next level. Here, we review the challenges and methods for shaping the wavefront and spectrum of plasmonic waves. In particular, we present the recent advances in plasmonic spatial and spectral shaping, which are based on the realization of plasmonic holograms for the optical nearfield.
Periodic structures with a sub‐wavelength pitch have been known since Hertz conducted his first experiments on the polarization of electromagnetic waves. While the use of these structures in waveguide optics was proposed in the 1990s, it has been with the more recent developments of silicon photonics and high‐precision lithography techniques that sub‐wavelength structures have found widespread application in the field of photonics. This review first provides an introduction to the physics of sub‐wavelength structures. An overview of the applications of sub‐wavelength structures is then given including: anti‐reflective coatings, polarization rotators, high‐efficiency fiber–chip couplers, spectrometers, high‐reflectivity mirrors, athermal waveguides, multimode interference couplers, and dispersion engineered, ultra‐broadband waveguide couplers among others. Particular attention is paid to providing insight into the design strategies for these devices. The concluding remarks provide an outlook on the future development of sub‐wavelength structures and their impact in photonics.
Two hundred years after Malus' discovery of optical anisotropy, the study of polarization‐driven optical effects is as active as ever, generating interest in new phenomena and potential applications. However, in ultrafast optics, the influence of polarization is frequently overlooked being considered as either detrimental or negligible. Here we demonstrate that spatio‐temporal couplings, which are inherent for ultrafast laser systems with chirped‐pulse amplification, accumulate in multi‐pulse irradiation and lead to a strongly anisotropic light‐matter interaction. Our results identify angular dispersion in the focus as the origin for the polarization dependence in modification, yielding an increase in modification strength. With tight focusing (NA ≥ ∼0.4), this non‐paraxial effect leads to a manifestation of spatio‐temporal couplings in photo‐induced modification. We devise a practical way to control the polarization dependence and exploit it as a new degree of freedom in tailoring laser‐induced modification in transparent material. A near‐focus, non‐paraxial field structure analysis of an optical beam provides insight on the origin of the polarization dependent modification. However, single pulse non‐paraxial corrected calculations are not sufficient to explain the phenomena confirming the experimental observations and exemplifying the need for multi‐pulse analysis.
Traditional detour‐phase hologram is a powerful optical device for manipulating phase and amplitude of light, but it is usually not sensitive to the polarization of light. By introducing the light‐metasurface interaction mechanism to the traditional detour phase hologram, we design a novel plasmonic nano‐slits assisted polarization selective detour phase meta‐hologram, which has attractive advantages of polarization multiplexing ability, broadband response, and ultra‐compact size. The meta‐hologram relies on the dislocations of plasmonic slits to achieve arbitrary phase distributions, showing strong polarization selectivity to incident light due to the plasmonic response of deep‐subwavelength slits. To verify its polarization sensitive and broadband responses, we experimentally demonstrate two holographic patterns of an optical vortex and an Airy beam at p‐ and s‐polarized light with wavelengths of 532nm, 633nm and 780nm, respectively. Furthermore, we realize an application example of the meta‐hologram as a polarization multiplexed photonic device for multi‐channel optical angular momentum (OAM) generation and detection. Such meta‐holograms could find widespread applications in photonics, such as chip‐level beam shaping and high‐capacity OAM communication.
The ability of generating arbitrary surface plasmon (SP) profiles in a controllable manner is of particular interest in designing plasmonic imaging, lithography and forcing devices. During the past decades, holography has gained enormous interest and achievements in free‐space three‐dimensional displays. Here, by applying a two‐dimensional version of holography, we experimentally demonstrate a generic method to control the SP profiles. Through controlling the orientation angles of two separated slits under circular polarization incidence, the amplitude and phase of the excited SPs can be freely manipulated, which allows direct generation of the desired SP profiles. A series of controllable SP holography schemes are theoretically and experimentally demonstrated, where the holographic SP profiles with high imaging quality can be dynamically modulated by varying the circular polarization handedness or orientation angle of linear polarization. The universality and simplicity of the proposed design strategies would offer promising opportunities for practical plasmonic applications.
Transformation optics, a recent geometrical design strategy of light manipulation with both ray trajectories and optical phase controlled simultaneously, promises an invisibility cloaking device that can render a macroscopic object invisible even to a scientific instrument measuring optical phase. Recent “carpet” cloaks have extended their cloaking capability to broadband frequency ranges and macroscopic scales, but they only demonstrated the recovery of ray trajectories after passing through the cloaks, while whether the optical phase would reveal their existence still remains unverified. In this paper, a phase‐preserved macroscopic visible‐light carpet cloak is demonstrated in a geometrical construction beyond two dimensions. As an extension of previous two‐dimensional (2D) macroscopic carpet cloaks, this almost‐three‐dimensional carpet cloak exhibits three‐dimensional (3D) invisibility for illumination near its center (i.e. with a limited field of view), and its ideal wide‐angle invisibility performance is preserved in multiple 2D planes intersecting in the 3D space. Optical path length is measured with a broadband pulsed‐laser interferometer, which provides unique experimental evidence on the geometrical nature of transformation optics.
Surface plasmon polaritons (SPPs) have sparked enormous interest on nanophotonics beyond the diffraction limit for their remarkable capabilities of subwavelength confinements and strong enhancements. Due to the inherent polarization sensitivity of the SPPs [transverse‐magnetic (TM) polarization], it is a great challenge to couple the s‐polarized free‐space light to the SPPs. Here, an ultrasmall defect aperture (<λ2/2) is designed to directionally couple both the p‐ and s‐polarized incident beams to the single SPP mode in a broad bandwidth, which is guided by a subwavelength plasmonic waveguide. Simulations show that hot spots emerge at the sharp corners of the defect aperture when the incident beams illuminate it from the back side. The strong radiative fields from the hot spots are directionally coupled to the SPP mode because of the symmetry breaking of the defect aperture. By adjusting the structural parameters, both the unidirectional and bidirectional SPP coupling from the two orthogonal linear‐polarization incident beams are experimentally demonstrated. The polarization‐free coupling of the SPPs is of importance in circuits for fully optical processing of information with a deep‐subwavelength footprint.
High efficiency, broad bandwidth, and robust angular tolerance are key considerations in photonic device design. Here, a few‐layer, asymmetric light transmitting metasurface that simultaneously satisfies all the above requirements is reported. The metasurface consists of coupled metallic sheets. It has a measured transmission efficiency of 80%, extinction ratio of 13.8 dB around 1.5 μm, and a full width half maximum bandwidth of 1.7 μm. It is as thin as 290 nm, has good performance tolerance against the angle of incidence and constituent nano‐structure geometry variations. This work demonstrates a practical asymmetric light transmission device with optimal performance for large scale manufacturing.
The recent progress in integrated quantum optics has set the stage for the development of an integrated platform for quantum information processing with photons, with potential applications in quantum simulation. Among the different material platforms being investigated, direct‐bandgap semiconductors and particularly gallium arsenide (GaAs) offer the widest range of functionalities, including single‐ and entangled‐photon generation by radiative recombination, low‐loss routing, electro‐optic modulation and single‐photon detection. This paper reviews the recent progress in the development of the key building blocks for GaAs quantum photonics and the perspectives for their full integration in a fully‐functional and densely integrated quantum photonic circuit.
Open‐access microcavities are emerging as a new approach to confine and engineer light at mode volumes down to the λ3 regime. They offer direct access to a highly confined electromagnetic field while maintaining tunability of the system and flexibility for coupling to a range of matter systems. This article presents a study of coupled cavities, for which the substrates are produced using Focused Ion Beam milling. Based on experimental and theoretical investigation the engineering of the coupling between two microcavities with radius of curvature of 6 m is demonstrated. Details are provided by studying the evolution of spectral, spatial and polarisation properties through the transition from isolated to coupled cavities. Normal mode splittings up to 20 meV are observed for total mode volumes around . This work is of importance for future development of lab‐on‐a‐chip sensors and photonic open‐access devices ranging from polariton systems to quantum simulators.
In the development of microfluidic chips, conventional 2D processing technologies contribute to the manufacturing of basic microchannel networks. Nevertheless, in the pursuit of versatile microfluidic chips, flexible integration of multifunctional components within a tiny chip is still challenging because a chip containing micro‐channels is a non‐flat substrate. Recently, on‐chip laser processing (OCLP) technology has emerged as an appealing alternative to achieve chip functionalization through in situ fabrication of 3D microstructures. Here, the recent development of OCLP‐enabled multifunctional microfluidic chips, including several accessible photochemical/photophysical schemes, and photosensitive materials permiting OCLP, is reviewed. To demonstrate the capability of OCLP technology, a series of typical micro‐components fabricated using OCLP are introduced. The prospects and current challenges of this field are discussed.
Monocrystalline titanium dioxide (TiO2) micro‐spheres support two orthogonal magnetic dipole modes at terahertz (THz) frequencies due to strong dielectric anisotropy. For the first time, we experimentally detected the splitting of the first Mie mode in spheres of radii m through near‐field time‐domain THz spectroscopy. By fitting the Fano lineshape model to the experimentally obtained spectra of the electric field detected by the sub‐wavelength aperture probe, we found that the magnetic dipole resonances in TiO2 spheres have narrow linewidths of only tens of gigahertz. Anisotropic TiO2 micro‐resonators can be used to enhance the interplay of magnetic and electric dipole resonances in the emerging THz all‐dielectric metamaterial technology.
