Structural and orientational studies of chiral N-[4(1-pyrene)butyroyl]-phenylalanine in cast film

Cast films of chiral material N-[4(1-pyrene)butyroyl]-l-phenylalanine (Py-l-Phe) and the racemic modification (the 1:1 mixture of Py-l-Phe and Py-d-Phe) have been investigated in the present study. The microscopic structure, molecular orientation and the aggregation in the film have been studied by using ultraviolet-visible (UV-vis) and infrared (IR) spectroscopy. When a cast film is formed from the chloroform solution at room temperature, the J-aggregates of Py-l-Phe and Py-d-Phe are observed by UV-vis spectra. A comparison of Fourier transform infrared (FT-IR) transmission and reflection-absorption (RA) spectroscopy has been applied to reveal the orientation and structural characterization of the cast films. It has been found that the pyrenyl ring in the cast film of Py-l-Phe assumes a nearly vertical orientation with respect to the surface of the solid substrate. And there are two different hydrogen bonding species, cyclic dimer and linear dimer, exist in carboxyl groups in cast films. The detailed analysis of the OH and NH stretching modes of Py-l-Phe and Py-d-Phe allows us to reveal the hydrogen bonds existing in the films.     

Photoelectrical properties of Langmuir–Blodgett films of poly(methyl phenylsilane)s

Langmuir–Blodgett (LB) films were prepared from poly(methylphenylsilane) bearing electron acceptor π-conjugated substituents. The small limiting area (0.078 nm²) per one repeating unit of polysilane (PSi) in monomolecular film and the large thickness of the film (6 nm) suggest that the polymer chains are not fully spread on water surface. The electrical and photoelectrical properties of Al/LB film/Au sandwich cells containing various numbers of the polysilane layers were studied. Holes were transported from the Al electrode through the LB film to the Au electrode when the light was absorbed by the polysilane. The highest photovoltaic effect occurred in the first monolayer of polysilane at the Al contact. The cell resistivity and the photovoltage were decreased by parallel conductance of defects in the films consisting of small numbers of PSi layers.     

Novel non-peptide GPIIb/IIIa antagonists: synthesis and biological activities of 2-[4-[2-(4-amidinobenzoylamino)-2-(substituted)acetyl]-3-(2-methoxy-2-oxoethyl)-2-oxopiperazinyl] acetic acids

To improve the in vitro and in vivo potency of our first low molecular weight GPIIb/IIIa antagonist 1 (TAK-029), a series of 2-[4-[2-(4-amidinobenzoylamino)-2-(substituted)acetyl]-3-(2-methoxy-2-oxoethyl)-2-oxopiper-azinyllacetic acids were synthesized through modification of the glycine moiety of 1 and evaluated for their ability to inhibit in vitro adenosine 5'-diphosphate (ADP)-induced platelet aggregation of guinea pig platelet rich plasma (PRP). Among the compounds examined, the (3S,2S)-4-methoxyphenylalanine derivative 4h showed the most potent antagonistic activity with an IC50 value of 13 nM. Dose-dependent inhibition of ex vivo platelet aggregation was achieved with oral administration of 4h (0.3-1.0 mg/kg) to guinea pigs. Complete inhibition was observed for up to 8 h, and 43% inhibition could still be observed 24 h after oral administration of 1.0 mg/kg. The long-lasting antiplatelet effect of 4h suggests that 4h would be suitable for once-a-day dosing. Structure-activity relationships (SAR) were examined in the series of the phenylalanine derivatives. An increase in the electron density around the 4-position of the phenyl ring of the phenylalanine moiety led to an increase in the antiplatelet activity, suggesting the existence of a hydrophobic and electrostatic interaction site in addition to the ionic binding sites in the GPIIb/IIIa.     

Supramolecular vesicles of cationic gemini surfactants modulated by p-sulfonatocalix[4]arene

Supramolecular binary vesicles were constructed by host-guest complex formation between p-sulfonatocalix[4]arene and three cationic gemini surfactants, which were identified by UV-vis, dynamic laser scattering, transmission electron microscopy, scanning electron microscopy, atomic force microscopy, and surface tension experiments. The critical aggregation concentration of gemini surfactants decreased pronouncedly by a factor of ca. 1000 owing to the complexation of p-sulfonato-calix[4]arene.     

Electrochemical and dissolution behavior of the Ti-alloy VT-9 in H2SO4 solution in the presence of the organic inhibitor (2-phenyl-4-[(E)-1-(4-solphanylanilino)methylyden]-1,3-oxazole-5(4H)-one

This investigation potentiodynamically evaluates the corrosion behavior of a high strength titanium alloy, VT-9, in 4 M sulfuric acid solution containing different concentrations (10, 20, 30 ppm) of the organic inhibitor, 2-phenyl-4-[(E)-1-(4-sulfanylanilino)methylidene]-1,3-oxazole-5(4H)-one (L-SH), at different temperatures (293, 303 and 313 ± 1 K). The open circuit potential values noted before and after each experiment varied appreciably with time. These values, in the presence of L-SH, were negative before polarization, but after completion of the experiment turned positive and remained stable over a long period of time. The cathodic current density values increased with increasing cathodic potential (more negative). The corrosion potential (E_corr) increased remarkably with the addition of L-SH. The corrosion current densities (I_corr), critical current density (I_cr), and passive current density (I_p) all decreased when L-SH was used. However, only the decrease in the I_corr with increasing amounts of inhibitor was significant compared to that of I_cr and I_p. L-SH expanded the range of the passive potential. SEM micrographs and open circuit potential measurements revealed the formation of a uniform and protective film on the alloy surface in the presence of L-SH, which acted as an efficient inhibitor.     

Structural characterization and properties of an azopolymer arranged in Langmuir and Langmuir-Blodgett films

The fabrication of Langmuir and Langmuir-Blodgett (LB) films of an acid-azopolymer (PAzCOOH) is reported. Several techniques were used in their characterization: surface pressure (pi) and surface potential (DeltaV) isotherms, UV-vis reflection spectroscopy, and Brewster angle microscopy (BAM) for the Langmuir films and contact angle measurements, UV-vis, fluorescence, IR and Raman spectroscopy and scanning electronic microscopy (SEM) for the LB films. Our study reveals that lateral chains of the polymer situate preferentially onto the water surface with the acid group in contact with the water, where aggregates are scarcely formed. Therefore, the lateral chains of PAzCOOH can be treated as individual monomers to determine structural properties of the fabricated Langmuir and LB films. Monomeric treatment has been used to interpret UV-vis reflection spectroscopy, and a monomer model has been performed to represent lateral chains using density functional theory at B3LYP 6-31G(d,p) level of theory to assign the observed vibrational spectra.     

Brewster angle microscopy study of poly(epsilon-caprolactone) crystal growth in Langmuir films at the air/water interface

Surface pressure-induced crystallization of poly(epsilon-caprolactone) (PCL) from a metastable region of the surface pressure-area per monomer (Pi-A) isotherm in Langmuir monolayers at the air/water (A/W) interface has been captured in real time by Brewster angle microscopy (BAM). Morphological features of PCL crystals grown in Langmuir films during the compression process exhibit four fully developed faces and two distorted faces. During expansion of the crystallized film, polymer chains slowly detach from the crystalline domains and diffuse back into the monolayer as the crystals "melt". Typical diffusion-controlled morphologies are revealed by BAM during the melting process as the secondary dendrites melt away faster, that is, at a higher surface pressure than the principal axes. Electron diffraction on Langmuir-Schaefer films suggests that the lamellar crystals are oriented with the polymer chain axes perpendicular to the substrate surface, while atomic force microscopy reveals a crystal thickness of approximately 7.6 nm.     

The synthesis,characterization, and polymerization of 1-ethyl-4-[(2-methacryloxy)ethyl carbamoyloxymethyl]-2,6,7-trioxabicyclo[2.2.2]octane

The synthesis of a monomer bearing polymerizable acrylic and bicyclic ortho ester groups is described. The monomer 1-ethyl-4-[(2-methacryloxy)ethyl carbamoyloxymethyl]-2,6,7-trioxabicyclo[2.2.2]octane is characterized by elemental analysis, ¹H- and ¹³C-NMR spectra, mass spectra, and heat of polymerization. The free-radical and ionic polymerization of 4 is probed as is its copolymerization with several vinyl monomers.     

Molecular dynamics simulation of amphiphilic bistable [2]rotaxane langmuir monolayers at the air/water interface

Bistable [2]rotaxanes display controllable switching properties in solution, on surfaces, and in devices. These phenomena are based on the electrochemically and electrically driven mechanical shuttling motion of the ring-shaped component, cyclobis(paraquat-p-phenylene) (CBPQT(4+)), between a monopyrrolotetrathiafulvalene (mpTTF) unit and a 1,5-dioxynaphthalene (DNP) unit located along a dumbbell component. The most stable state of the rotaxane (CBPQT(4+)@mpTTF) is that in which the CBPQT(4+) ring encircles the mpTTF unit, but a second less favored metastable co-conformation with the CBPQT(4+) ring surrounding the DNP (CBPQT(4+)@DNP) can be formed experimentally. For both co-conformations of an amphiphilic bistable [2]rotaxane, we report here the structure and surface pressure-area isotherm of a Langmuir monolayer (LM) on a water subphase as a function of the area per molecule. These results from atomistic molecular dynamics (MD) studies are validated by comparing with experiments based on similar amphiphilic rotaxanes. For both co-conformations, we found that as the area per molecule increases the thickness of the LM decreases while the molecular tilt increases. Both co-conformations led to similar LM thicknesses at the same packing area. From the simulated LM systems, we calculated the electron density profiles of the monolayer as a function of area per molecule, which show good agreement with experimental analyses from synchrotron X-ray reflectivity measurements of related systems. Decomposing the overall electron density profiles into component contributions, we found distinct differences in molecular packing in the film depending upon the co-conformation. Thus we find that the necessity of allowing the tetracationic ring to become solvated by water leads to differences in the structures for the two co-conformations in the LM. At the same packing area, the value of the overall tilt angle does not seem to be sensitive to whether the CBPQT(4+) ring is encircling the mpTTF or the DNP unit. However, the conformation of the dumbbell does depend on the location of the CBPQT(4+) ring, which is reflected in the segmental tilt angles of the mpTTF and DNP units. Using the Kirkwood-Buff formula in conjunction with MD calculations, we find the surface pressure-area isotherms for each co-conformation in which the CBPQT(4+)@mpTTF form has smaller surface tension and therefore larger surface pressure than the CBPQT(4+)@DNP at the same packing area, differences that decreases with increasing area per molecule, which is verified experimentally.     

Study of poly[bis(p-toluene sulfonate) diacetylene] films prepared by a modification of the Langmuir–Blodgett technique

Coherent this films of poly[bis(p-toluene sulfonate) diacetylene] were successfully formed by modified Langmuir–Blodgett techniques using two methods: (i) Photopolymerization of the monomer film at the gas/liquid interface and then transfer to a solid substrate, and (ii) transfer of the monomer film to the solid substrate and subsequent photopolymerization on the substrate itself. The films thus obtained were characterized by traditional force–area isotherms while on pure water subphases. Segments were transferred at either 1 or 10 dyn/cm surface pressure, in different stages of photopolymerization, to glass or germanium substrates. The films on the substrate were characterized by the methods of multiple attenuated-internal-reflection infrared spectroscopy, ellipsometry, contact-potential measurement, and laser Raman spectroscopy. Our results show that the films are multimolecular and about 100 Å thick. Of special interest were the observation of significant anisotropy of oriented dipoles and the ability to obtain excellent spectral data for these very thin oriented films. Raman spectroscopic features are similar to those observed for the bulk polymer, even in the low-frequency region. Polarized Raman spectroscopy confirmed the presence of local anisotropy in these films.     

Supramolecular architecture in Langmuir and Langmuir-Blodgett films incorporating a chiral azobenzene

This article describes the synthesis and fabrication of Langmuir and Langmuir-Blodgett (LB) films incorporating a chiral azobenzene derivative, namely, ( S)-4- sec-butyloxy-4'-[5'-(methyloxycarbonyl)pentyl-1'-oxy]azobenzene, abbreviated as AZO-C4(S). Appropriate conditions for the fabrication of monolayers of AZO-C4(S) at the air-water interface have been established, and the resulting Langmuir films have been characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and UV-vis reflection spectroscopy. The results indicate the formation of an ordered trilayer at the air-water interface with UV-vis reflection spectroscopy showing a new supramolecular architecture for multilayered films as well as the formation of J aggregates. Films were transferred onto solid substrates, with AFM revealing well-ordered multilayered films without 3D defects. Infrared and UV-vis absorption spectroscopy indicate that the supramolecular architecture may be favored by the formation of H bonds between acid groups in neighboring layers and pi-pi intermolecular interactions. Circular dichroism spectra reveal chiro-optical activity in multilayered LB films.     

Surface enhanced fluorescence and Raman imaging of Langmuir-Blodgett azopolymer films

The spectroscopic properties and surface-enhanced spectra of Langmuir-Blodgett (LB) films of methacrylic homopolymer (HPDR13) are presented. It is shown that LB film displays strong fluorescence attributed to the spatial restrictions imposed by its structure. The emission is observed in conjunction with photoisomerization, a process clearly demonstrated by the formation of surface-relief gratings in the LB film [C.R. Mendon?a et al., Macromolecules 32 (1999) 1493]. Surface-enhanced Raman scattering (SERS), Surface-enhanced resonance Raman scattering (SERRS) and surface-enhanced fluorescence (SEF) were observed for LB films of HPDR13 deposited onto silver island films. SERS measurements were also carried out on a sample fabricated with one monolayer LB film deposited onto silver islands followed by one overlayer of silver (LB sandwiched between two layers of silver islands). The polymer interacts very weakly with the metal surface (physisorption), and the enhancement effect is determined by the local electric field enhancement. The strong SERS and SERRS signals were suitable for micro-Raman imaging. Line, area mapping and global images of the LB monolayer on silver island are reported. The transfer ratio in the fabrication of the LB suggests a homogeneous coating of the silver islands, thereby the chemical images show the variation of the SERS intensity due to surface enhancement.     

Blends of amphiphilic trisilanolisobutyl-POSS and phosphine oxide substituted poly(dimethylsiloxane) at the air/water interface

Mixtures of a polyhedral oligomeric silsesquioxane, trisilanolisobutyl-POSS, and a polar silicone, poly(dimethyl-co-methylvinyl-co-methyl, 2-diphenyl phosphine oxide ethyl) siloxane (PDMS-PO), spread as Langmuir monolayers at the air/water interface are used to examine the surface phase behavior and aggregation of trisilanolisobutyl-POSS as a function of silicone composition. Analyses of the surface pressure-area per monomer (Pi-A) isotherms in terms of the collapse pressures and excess Gibbs free energies of mixing indicate the monolayers form slightly negative deviation mixtures. Direct observations of surface morphology with Brewster angle microscopy in the collapsed regime reveal that the governing factor for aggregation is the collapse Pi of the component with a stronger affinity for water. In trisilanolisobutyl-POSS/PDMS-PO blends, POSS aggregates as discrete domains and does not coalesce into larger aggregates or networklike structures for <80 wt % POSS, a feature that is vastly different from a previous study of POSS blended with regular poly(dimethylsiloxane).     

聚苯乙烯-聚(4-乙烯基吡啶)嵌段共聚物LB膜结构形态的研究

采用氯仿作为铺展溶剂,将嵌段共聚物聚苯乙烯-聚(4-乙烯基吡啶)(PS-b-P4VP)稀溶液铺展于空气与水界面上,利用Langmuir-Blodgett(LB)膜技术转移至固体基底.研究了不同的嵌段比、表面压和小分子1-芘丁酸(PBA)的加入对嵌段共聚物气液界面聚集组装的影响.研究发现随着亲水段(P4VP)的增加,聚集组装结构由纳米片状、带状转变成纳米条状、纳米点状结构.表面压对纯PS-b-P4VP聚集组装产生影响,表面压增大,组装体排列紧密;随着表面压的继续增大,单层聚集结构遭到破坏,发生堆叠.加入PBA小分子后,PBA与PS-b-P4VP形成氢键,形态发生明显变化,原来的片状结构转变为条状或点状结构.     

Inhibition of aggregation of a biomimic peptidolipid Langmuir monolayer by Congo red studied by UV-vis and infrared spectroscopies

A synthetic peptidolipid consisted of a hydrocarbon chain with a chain length of C18 and a peptide moiety of IIGLM terminated with an amine group, designated as C18IIGLM-NH2, has been employed as a biomimic model compound of amyloid peptide for exploring molecular interaction and orientation with the use of the Langmuir monolayer and Langmuir-Blodgett film techniques. Inspired by a well-known fact that a stain reagent, Congo red (CR), binds well to the amyloid-mimic part (IIGLM), inhibition of molecular aggregation of C18IIGLM-NH2 by interaction with CR was expected, and it has been investigated by use of surface pressure-area isotherm, surface dipole moment-area isotherm, Brewster-angle microscopy, and UV-vis/infrared spectroscopies. It has been revealed that monomeric CR molecules whose long axis is parallel to the Langmuir monolayer surface are penetrating the C18IIGLM-NH2 Langmuir monolayer, which plays a role of inhibition of molecular aggregation via hydrogen bonding.     

Spectroscopic and structural elucidation of merocyanine dye 2,5-[1-metyl-4-[2-(4-hydroxyphenyl)ethenyl)]piridinium]-hexane tetraphenylborate aggregation processes

Structural and spectroscopic elucidation of merocyanine dye, 2,5-[1-metyl-4-[2-(4-hydroxyphenyl)ethenyl)]piridinium]-hexane tetraphenylborate, is performed in gas and condense phase by means of solution and solid-state conventional and linear-polarized IR-spectroscopy of oriented colloids in nematic liquid crystal suspension, UV-vis and fluorescence methods, HPLC MS/MS tandem and ESI mass spectrometry, (1)H, (13)C and (1)H-(1)H COSY NMR, TGV and DSC methods. Quantum chemical DFT calculations are performed for structural optimization and spectroscopic properties prediction.     

Photochromism of fulgides and stereoelectronic factors: Synthesis of (E)-4(3)-adamantyhdene-(5)-dicyanomethylene-3(4)-[1-(2,5-dimethylfuryl)ethylidene]tetrahydrofuran-2-one 4 and 4a and (E)-4-adamantylidene-3-[2,6-dimethyl-3,5-bis(p-diethyl-aminostyryl)benzylidene]tetrahydrofuran-2,5-dione 10

In the search for fulgides with potential semiconductor laser compatibility, 4-adamantylidene-5-dicyanomemylene-3-[1-(2,5-dimethyl-3-furyl)ethylidene]tetrahydrofuran-2-one ( 4 ), along with its regioisomer 4a , have been synthesized from the corresponding fulgide 6 containing a succinic anhydride ring by reaction with malononitrile in the presence of diethylamine. Upon irradiation with a uv light at λ_max 350 run, a mixture of 4 and 4a revealed a considerably enhanced bathochromic shift to the visible region, λ_max 605 nm as compared with the starting fulgide 6 which, upon analogous uv irradiation, absorbed at λ_max 515 nm. In the search for semiconductor-laser-compatible fulgides with increased efficiency for the reverse bleaching reaction, another fulgide (E)–adamantylidene-3-[2,6-dimethyl-3,5-bis(p-diethylaminostyryl)-benzylidene]tetrahydrofuran-2,5-dione ( 10 ) was synthesized in seven steps starting from 2-bromo-m-xylene. However, 10 failed to undergo electrocyclic ring-closure upon irradiation with a uv light at λ_max 350 nm. The analogous fulgide 8 , which contains an isopropylidene functionality in place of the adamantyl group of 10 , was resynthesized for comparison, and showed two absorption maxima, one at 545 nm and the other at 620 nm. The missing physico-chemical data for 8 have also been provided.     

Study of the aggregation of human insulin Langmuir monolayer

The human insulin (HI) Langmuir monolayer at the air-water interface was systematically investigated in the presence and absence of Zn(II) ions in the subphase. HI samples were dissolved in acidic (pH 2) and basic (pH 9) aqueous solutions and then spread at the air-water interface. Spectroscopic data of aqueous solutions of HI show a difference in HI conformation at different pH values. Moreover, the dynamics of the insulin protein showed a dependence on the concentration of Zn(II) ions. In the absence of Zn(II) ions in the subphase, the acidic and basic solutions showed similar behavior at the air-water interface. In the presence of Zn(II) ions in the subphase, the surface pressure-area and surface potential-area isotherms suggest that HI may aggregate at the air-water interface. It was observed that increasing the concentration of Zn(II) ions in the acidic (pH 2) aqueous solution of HI led to an increase of the area at a specific surface pressure. It was also seen that the conformation of HI in the basic (pH 9) medium had a reverse effect (decrease in the surface area) with the increase of the concentration of Zn(II) ions in solution. From the compression-decompression cycles we can conclude that the aggregated HI film at air-water interface is not stable and tends to restore a monolayer of monomers. These results were confirmed from UV-vis and fluorescence spectroscopy analysis. Infrared reflection-absorption and circular dichroism spectroscopy techniques were used to determine the secondary structure and orientation changes of HI by zinc ions. Generally, the aggregation process leads to a conformation change from α-helix to β-strand and β-turn, and at the air-water interface, the aggregation process was likewise seen to induce specific orientations for HI in the acidic and basic media. A proposed surface orientation model is presented here as an explanation to the experimental data, shedding light for further research on the behavior of insulin as a Langmuir monolayer.     

Synthesis of Novel Amphiphilic Poly （ester-amine） Dendrimers and Their Recognition of Hg2＋ at the Air／Water Interface

Two novel amphiphilic poly(ester-amine)dendrimers were synthesized and characterized by 1H NMR,13C NMR and IR spectra.Their properties of Langmuir film were investigated at the air/water interface.The relationship between the surface pressure and area isotherms of the dendrimers was found to be dependent on the nature of subphases,Interaction between HgCl2 and the dendrimers was observed,indicating that the amphiphilic dendrimers could act as a sensor for Hg^2 .     

Investigation on corrosion inhibition effect of N-[4-(1,3-benzo[d]thiazol-2-ylcarbamoyl)phenyl]quinoline-6-carboxamide as a novel organic inhibitor on mild steel in 1N HCl at different temperatures: Experimental and theoretical study

A new novel organic corrosion inhibitor N-[4-(1,3-benzo[d]thiazol-2-ylcarbamoyl)phenyl]quinoline-6-carboxamide (NBCPQC) has been synthesized. The synthesized novel organic inhibitor NBCPQC used to be carried out on mild steel corrosion in 1N HCl for the first time. The studied inhibitor was once evaluated as corrosion inhibitor for mild steel in 1N of HCl solution using electrochemical research which advocated that a protective film is form by the process of inhibitor absorption on the surface of mild steel. Inhibitor shows a better inhibiton efficiency of maximum above 90% in 1N HCl medium. Inhibitors show a better efficiency by way of reducing and sluggish down the corrosion process however on growing the temperature it is weakened on controlling corrosion. In addition to this adsorption isothermal models had been interpreted to fit the adsorption behaviour of the inhibitor compound on mild steel surface. Thus the result reveals that the compound shows a Langmuir adsorption isotherm.