Electrochemical Ammonia Gas Sensing in Nonaqueous Systems: A Comparison of Propylene Carbonate with Room Temperature Ionic Liquids

First, the direct and indirect electrochemical oxidation of ammonia has been studied by cyclic voltammetry at glassy carbon electrodes in propylene carbonate. In the case of the indirect oxidation of ammonia, its analytical utility of indirect for ammonia sensing was examined in the range from 10 and 100 ppm by measuring the peak current of new wave resulting from reaction between ammonia and hydroquinone, as function of ammonia concentration, giving a sensitivity 1.29×10^?7 A ppm^?1 (r²=0.999) and limit‐of‐detection 5 ppm ammonia. Further, the direct oxidation of ammonia has been investigated in several room temperature ionic liquids (RTILs), namely 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([C₄mim] [BF₄]), 1‐butyl‐3‐methylimidazolium trifluoromethylsulfonate ([C₄mim] [OTf]), 1‐Ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₂mim] [NTf₂]), 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim] [NTf₂]) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim] [PF₆]) on a 10 μm diameter Pt microdisk electrode. In four of the RTILs studied, the cyclic voltammetric analysis suggests that ammonia is initially oxidized to nitrogen, N₂, and protons, which are transferred to an ammonia molecule, forming NH via the protonation of the anion(s) (A^?). However, in [C₄mim] [PF₆], the protonated anion was formed first, followed by NH . In all five RTILs, both HA and NH are reduced at the electrode surface, forming hydrogen gas, which is then oxidized. The analytical ability of this work has also been explored further, giving a limit‐of‐detection close to 50 ppm in [C₂mim] [NTf₂], [C₄mim] [OTf], [C₄mim] [BF₄], with a sensitivity of ca. 6×10^?7 A ppm^?1 (r²=0.999) for all three ionic liquids, showing that the limit of detection was ca. ten times larger than that in propylene carbonate since ammonia in propylene carbonate might be more soluble in comparison with RTILs when considering the higher viscosity of RTILs.     

Supramolecular Self‐Assembly of Cucurbit[6]uil and Ionic Liquid in Non‐aqueous System

A novel [2]pseudorotaxane of cucurbit[6]uril(CB[6]) and 1‐butyl‐3‐methyl‐imidazolium bromide ([C₄mim]Br) was synthesized by directly mixing the host and the guest molecules in non‐aqueous system. Structural characterizations of the [2]pseudorotaxane were carried out by 1D, 2D NMR and X‐ray crystallography techniques both in solution and in crystal structure. The crystal structure demonstrated that CB[6] and [C₄mim]Br formed a complex with the ratio 1:1, in which one guest [C₄mim]Br was included inside the CB[6], while two other [C₄mim]Br molecules were free and surrounded the [2]pseudorotaxane as solvent molecules, which could stabilize the crystal structure through hydrogen bonds. Moreover, parallel solvent channels consisting by free [C₄mim]Br molecules occupied the pores among the frame of the pseudorotaxanes and formed zigzag lines in the crystal structure. [C₄mim]Br can serve as not only the guest reactant but also the solvent in the formation of [2]pseudorotaxane formation.     

Abrasive Stripping Voltammetric Studies of Lignin and Lignin Model Compounds

Lignin is potentially a major renewable, nonfossil source of aromatic and cyclohexyl compounds. In this study, we have investigated the abrasive stripping voltammetry of lignin and four lignin model compounds in the room temperature ionic liquids (RTILs) [C₄mim][NTf₂], [N_6,2,2,2][NTf₂] and [C₄mim][OTf] (where [C₄mim]⁺=1‐butyl‐3‐methylimidazolium, [N_6,2,2,2]⁺=n‐hexyltriethylammonium, [NTf₂]^?=bis(trifluoromethanesulfonyl)imide and [OTf]^? =trifluoromethanesulfonate) on a gold macrodisk and in 0.1 M H₂SO₄ and 0.1 M NaOH on a boron‐doped diamond (BDD) macroelectrode, with the hope of using the voltammetry to fingerprint the functional groups within the lignin molecule. The use of RTILs on metal electrodes, or either acidic or basic media in combination with BDD electrodes allows solvent systems with wide electrochemical potential windows, useful for studying voltammetry which may be difficult to observe in systems where early breakdown of the solvent occurs.     

Effect of a copolymer poly(4-styrenesufonic acid-co-maleic acid) sodium salt on aggregation behavior of surface active ionic liquid 1-tetradecyl-3-methylimidazolium bromide and structurally similar conventional surfactant tetradecyltrimethylammonium bromide in aqueous media

The complex formation of anionic copolymer poly(4-styrenesufonic acid-co-maleic acid) sodium salt (PSSA-co-MA) with surfactant tetradecyltrimethylammonium bromide (TTAB) and surface active ionic liquid (SAIL) 1-tetradecyl-3-methylimidazolium bromide ([C₁₄mim][Br]) has been studied in aqueous media by utilizing various techniques such as tensiometry, conductometry and fluorimetry. Conductometric and tensiometric curve of all the investigated systems demonstrate four break points corresponding to four transition states. All the thermodynamic and surface properties of surfactant-polyelectrolyte systems have been determined by conductance and surface tension measurements respectively. The value of cmc decreases with increasing the concentration of polyelectrolyte for studied systems. But it has been observed that, the lowering in cmc values is more in [C₁₄mim][Br]-PSSA-co-MA system than TTAB-PSSA-co-MA system, although the differences in cmc are not much significant. The lowering in cmc of [C₁₄mim][Br]-PSSA-co-MA system shows that ionic attractions between cationic head group [C₁₄mim]⁺ and anionic parts (SO₃^? and COOH), are stronger than those in TTA⁺ and anionic parts (SO₃^? and COOH). The results indicated that the [C₁₄mim][Br]-PSSA-co-MA complexes are comparatively more surface active than TTAB-PSSA-co-MA complexes. The fluorescence probe behaviour also confirms cmc value and provides aggregation number (N_agg). Finally all the findings of [C₁₄mim][Br] and TTAB have been compared.     

Antistatic ability of 1-n-tetradecyl-3-methylimidazolium bromide and its effects on the structure and properties of polypropylene

In this study, 1-n-tetradecyl-3-methylimidazolium bromide ([C₁₄mim]Br), one kind of imidazolium ionic liquid (imi-IL), was incorporated into polypropylene (PP) via melt blending. The measurement of surface resistance (R_s) and volume resistance (R_v) of neat PP and PP/[C₁₄mim]Br blends indicated that [C₁₄mim]Br had excellent antistatic properties. The PP/[C₁₄mim]Br blend had the best antistatic ability, when the weight ratio of [C₁₄mim]Br to PP reached 3/100. The surface resistance of PP/[C₁₄mim]Br decreased from the 7.67 × 10¹³ to 1.40 × 10⁷ Ω whereas the volume resistance of PP decreased from 2.67 × 10¹⁴ to 2.60 × 10⁷ Ω. Semicrystalline morphology and crystal structure were investigated by polarized optical microscopy (POM) and X-ray diffraction (XRD). The spherulites of PP became smaller with the addition of [C₁₄mim]Br, implying that [C₁₄mim]Br had a nucleating effect in the PP matrix. The XRD study indicates the crystallization process of PP was affected by [C₁₄mim]Br, and the crystallinity of PP was thus decreased. Scanning electron microscopy (SEM) studies reveal that [C₁₄mim]Br had good dispersion in PP; thermogravimetric analysis (TGA) shows the addition of [C₁₄mim]Br remarkably increased the thermal stability of PP even though it is a small molecule.     

Study on the Conductivities of Pure and Aqueous Bromide-Based Ionic Liquids at Different Temperatures

Electrical conductivities were measured for the pure ionic liquids [C₆mim][Br] (1-hexyl-3-methylimidazolium bromide) and [C₈mim][Br] (1-octyl-3-methylimidazolium bromide) at 0.1 MPa from 293.15 to 333.15 K. Conductivity measurements were also made for the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems and their ternary water + [C₆mim][Br] + [C₈mim][Br] system at 0.1 MPa and 293.15, 298.15, and 303.15 K. The conductivity data of the pure ionic liquids were correlated by the VFT (Vogel-Tamman-Fulcher) equation, and the fitting parameters and mean absolute deviations were determined. New explanations are presented for the molality-dependent behavior of the conductivity of the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems. The generalized Young’s rule and the semi-ideal solution theory for conductivity were used to predict the conductivities of the ternary water + [C₆mim][Br] + [C₈mim][Br] system from the conductivities of its corresponding binary water + [C₆mim][Br] and water + [C₈mim][Br] subsystems. The predictions are in good agreement with the measured values.     

Luminescent Soft Material: Two New Europium‐Based Ionic Liquids

Two new Eu‐based ionic liquid systems, [C₄mim][DTSA] : [Eu(DTSA)₃] and 2[C₄mim] [DTSA] : [Eu(DTSA)₃] were synthesized at 120° under inert conditions from 1‐butyl‐1‐methylimidazolium ditoluenesulfonylamide ([C₄mim][DTSA]). The identity and purity of the synthesized compounds were confirmed by elemental analysis, IR, Raman, and ¹H‐NMR spectroscopy. As they solidify below 100° as glasses they qualify as ionic liquids. Fluorescence measurements show that the materials exhibit a strong red luminescence of high color purity. Therefore, they have the potential to be used for optical applications such as in emission displays.     

[C12mim]Br: A Temperature‐dependent Phase Transfer Catalyst and Its Application for Aerobic Oxidative Synthesis of 2‐Aryl Benzimidazoles,Benzoxazoles or Benzothiozoles Catalyzed by TEMPO Based Ionic Liquid

The application of [C₁₂mim]Br ionic liquid/o‐xylene temperature‐dependent biphasic system into the [Imim‐TEMPO][Cl]/O₂‐promoted condensation between o‐phenylenediamines, o‐aminophenol or o‐aminothiophenol with aldehydes for preparing benzimidazoles, benzoxazoles or benzothiozoles is described. Several aldehydes and o‐phenylenediamines, o‐aminophenol or o‐aminothiophenol were reacted efficiently to form corresponding products in excellent yields. Both the [Imim‐TEMPO][Cl] and [C₁₂mim]Br could be reused at least eight times without significantly decreasing the catalytic activity.     

Water‐Free Rare‐Earth‐Metal Ionic Liquids/Ionic Liquid Crystals Based on Hexanitratolanthanate(III) Anion

The hexanitratolanthanate anion (La(NO₃)₆^3?) is an interesting symmetric anion suitable to construct the component of water‐free rare‐earth‐metal ionic liquids. The syntheses and structural characterization of eleven lanthanum nitrate complexes, [C_nmim]₃[La(NO₃)₆] (n=1, 2, 4, 6, 8, 12, 14, 16, 18), including 1,3‐dimethylimidazolium hexanitratolanthanate ([C₁mim]₃[La(NO₃)₆], 1 ), 1‐ethyl‐3‐methylimidazolium hexanitratolanthanate ([C₂mim]₃[La(NO₃)₆], 2 ), 1‐butyl‐3‐methylimidazolium hexanitratolanthanate ([C₄mim]₃[La(NO₃)₆], 3 ), 1‐isobutyl‐3‐methylimidazolium hexanetratolanthanate ([isoC₄mim]₃[La(NO₃)₆], 4 ), 1‐methyl‐3‐(3′‐methylbutyl)imidazolium hexanitratolanthanate ([MC₄mim]₃[La(NO₃)₆], 5 ), 1‐hexyl‐3‐methylimidazolium hexanitratolanthanate ([C₆mim]₃[La(NO₃)₆], 6 ), 1‐methyl‐3‐octylimidazolium hexanitratolanthanate ([C₈mim]₃[La(NO₃)₆], 7 ), 1‐dodecyl‐3‐methylimidazolium hexanitratolanthanate ([C₁₂mim]₃[La(NO₃)₆], 8 ), 1‐methyl‐3‐tetradecylimidazolium hexanitratolanthanate ([C₁₄mim]₃[La‐(NO₃)₆], 9 ), 1‐hexadecyl‐3‐methylimid‐azolium hexanitratolanthanum ([C₁₆dmim]₃[La(NO₃)₆], 10 ), and 1‐methyl‐3‐octadecylimidazolium hexanitratolanthanate ([C₁₈mim]₃[La(NO₃)₆], 11 ) are reported. All new compounds were characterized by ¹H and ¹³C NMR, and IR spectroscopy as well as elemental analysis. The crystal structure of compound 1 was determined by using single‐crystal X‐ray diffraction, giving the following crystallographic information: monoclinic; P2₁/c; a=15.3170 (3), b=14.2340 (2), c=13.8954(2) Å; β=94.3453(15)°, V=3020.80(9) ų, Z=4, ρ=1.764 g cm^?3. The coordination polyhedron around the lanthanum ion is rationalized by six nitrate anions with twelve oxygen atoms. No hydrogen‐bonding network or water molecule was found in 1 . The thermodynamic stability of the new complexes was investigated by using thermogravimetric analysis (TGA). The water‐free hexanitratolanthanate ionic liquids are thermal and moisture stable. Four complexes, namely complexes 8 – 11 , were found to be ionic liquid crystals by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). They all present smectic A liquid‐crystalline phase.     

Study on the Interaction between a Novel Ionic Liquid Probe and Anionic Surfactants Using Resonance Light Scattering Spectra and Its Analytical Application

The interaction between anionic surfactants (AS) and 1‐hexadecyl‐3‐methylimidazolium bromide [C₁₆mim]Br was studied by using resonance light scattering (RLS) technique, UV‐Vis spectrophotometry and fluorometric methods. In Britton Robinson (BR) buffer (pH 6.0), [C₁₆mim]Br reacted with AS to form supermolecular complex which resulted in enhancement in RLS intensity. Their maximum RLS wavelengths were all at 390 nm. Some important interacting experimental variables, such as the solution acidity, [C₁₆mim]Br concentration, salt effect and addition order of the reagents, were investigated and optimized. Under the optimum conditions, quantitative determination ranges were 0.001–7 μg·mL^?1 for dodecyl sodium sulfate (SDS), 0.001–6 μg·mL^?1 for sodium dodecylbenzene sulfonate (SDBS) and 0.005–7 μg·mL^?1 for sodium lauryl sulfonate (SLS), respectively, while the detection limits were 1.3 ng·mL^?1 for SDS, 1.0 ng·mL^?1 for SDBS and 5.1 ng·mL^?1 for SLS, respectively. Based on the ion‐association reaction, a highly sensitive, simple and rapid method has been established for the determination of AS.     

1‐Octanol/Water Partition Coefficients of 1Alkyl‐3‐methylimidazolium Chloride

The solubilities of 1alkyl‐3‐methylimidazolium chloride, [C_nmim][Cl], where n=4, 8, 10, and 12, in 1octanol and water have been measured by a dynamic method in the temperature range from 270 to 370 K. The solubility data was used to calculate the 1octanol/water partition coefficients as a function of temperature and alkyl substituent. The melting point, enthalpies of fusion, and enthalpies of solid–solid phase transitions were determined by differential scanning calorimetry, DSC. The solubility of [C_nmim][Cl], where n=10 or 12 in 1octanol is comparable and higher than that of [C₄mim][Cl] in 1octanol. Liquid 1n‐octyl‐3‐methylimidazolium chloride, [C₈mim][Cl], is not miscible with 1octanol and water, consequently, the liquid–liquid equilibrium, LLE was measured in this system. The differences between the solubilities in water for n=4 and 12 are shown only in α₁ and γ₁ solid crystalline phases. Additionally, the immiscibility region was observed for the higher concentration of [C₁₀mim][Cl] in water. The intermolecular solute–solvent interaction of 1butyl‐3‐methylimidazolium chloride with water is higher than for other 1alkyl‐3‐methylimidazolium chlorides. The data was correlated by means of the UNIQUAC ASM and two modified NRTL equations utilizing parameters derived from the solid–liquid equilibrium, SLE. The root‐mean‐square deviations of the solubility temperatures for all calculated data are from 1.8 to 7 K and depend on the particular equation used. In the calculations, the existence of two solid–solid first‐order phase transitions in [C₁₂mim][Cl] has also been taken into consideration. Experimental partition coefficients (log P) are negative at three temperatures; this is evidence for the possible use of these ionic liquids as green solvents.     

Effects of room-temperature ionic liquids on the chemical vapor generation of gold: Mechanism and analytical application

To get insight into the mechanism of the effect of room-temperature ionic liquids (RTILs) on the chemical vapor generation (CVG) of noble metals, gold was taken as a model element, and eight RTILs were examined. All the RTILs resulted in 3-24 times improvement in sensitivity for Au, depending on their nature. For the RTILs with identical anion, the RTILs with the cations of short chain exhibited better enhancement effect than those with long alkyl chain length or complex branch chain. For the RTILs with identical cation, the RTILs with Br⁻ gave the best enhancement effect. The formation of ion pairs between the cation of RTILs and the anion species of gold via electrostatic interaction, and/or the substitution of the Cl⁻ in the anion species of gold by the anion of RTILs likely enabled a more effective CVG reaction to occur. The RTILs also facilitated the generation of small bubbles and provided an electrostatic stabilization to protect the unstable volatile gold species and to help fast isolation of volatile gold species from the reaction mixture. 1-Butyl-3-methylimidazolium tetrafluoroborate [C₄mim]Br gave the best improvement in the sensitivity (24 times) among the RTILs studied, and also reduced the interferences from common transition and other noble metals. Based on the enhancement effect of [C₄mim]Br, a novel flow injection-CVG-atomic fluorescence spectrometric method with a detection limit (3s) of 1.9 μg L⁻¹ and a precision of 3.1% (50 μg L⁻¹, RSD, n = 11) was developed for the determination of trace gold in geological samples.     

Effect of imidazolium-based ionic liquids on the aggregation behavior of twin-tailed cationic gemini surfactant in aqueous solution

Micellization behavior of the twin-tailed surfactants can be modulated by the addition of various modifiers. Ionic liquids (ILs) are one of them and are documented here. The beauty of these environmentally benign neoteric molecules lies in their structural versatility. Here, we have investigated the effect of three ILs: 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]), 1-hexyl-3-methylimidazolium bromide ([C₆mim][Br]), and 1-octyl-3-methylimidazolium bromide ([C₈mim][Br]) on the aggregation and surface adsorption behavior of cationic gemini surfactant, bis(hexadecyldimethyl ammonium)propane dibromide (16-3-16) through experimentally measured electrical conductivities, surface tensions, and by spectral methods (UV-vis absorbance and fluorescence measurements). The main focus of the study is to observe the effect of added ILs on the critical micelle concentration (cmc), various surface parameters, aggregation number, and size of the aggregates of gemini surfactant. The results show that the more hydrophobic ILs, that is, [C₆mim][Br] and [C₈mim][Br] behave as electrolyte at lower concentration and cosurfactant at higher concentration, whereas moderately hydrophobic IL [C₄mim][Br] acts as an electrolyte at all concentration ranges studied. The modulating effects of ILs were also compared with conventional electrolyte (NaBr) at similar conditions.     

Synthesis,Structure, and Physico‐optical Properties of Manganate(II)‐Based Ionic Liquids

Several ionic liquids (ILs) based on complex manganate(II) anions with chloro, bromo, and bis(trifluoromethanesulfonyl)amido (Tf₂N) ligands have been synthesized. As counterions, n‐alkyl‐methylimidazolium (C_nmim) cations of different chain length (alkyl=ethyl (C₂), propyl (C₃), butyl (C₄), hexyl (C₆)) were chosen. Except for the 1‐hexyl‐3‐methylimidazolium ILs, all of the prepared compounds could be obtained in a crystalline state at room temperature. However, each of the compounds displayed a strong tendency to form a supercooled liquid. Generally, solidification via a glass transition took place below ?40 °C. Consequently, all of these compounds can be regarded as ionic liquids. Depending on the local coordination environment of Mn²⁺, green (tetrahedrally coordinated Mn²⁺) or red (octahedrally coordinated Mn²⁺) luminescence emission from the ⁴T(G) level is observed. 1 The local coordination of the luminescent Mn²⁺ centre has been unequivocally established by UV/Vis as well as Raman and IR vibrational spectroscopies. Emission decay times measured at room temperature in the solid state (crystalline or powder) were generally a few ms, although, depending on the ligand, values of up to 25 ms were obtained. For the bromo compounds, the luminescence decay times proved to be almost independent of the physical state and the temperature. However, for the chloro‐ and bis(trifluoromethanesulfonyl)amido ILs, the emission decay times were found to be dependent on the temperature even in the solid state, indicating that the measured values are strongly influenced by nuclear motion and the vibration of the atoms. In the liquid state, the luminescence of tetrahedrally coordinated Mn²⁺ could only be observed when the tetrachloromanganate ILs were diluted with the respective halide ILs. However, for [C₃mim][Mn(Tf₂N)₃], in which Mn²⁺ is in an octahedral coordination environment, a weak red emission from the pure compound was found even in the liquid state at elevated temperatures.     

Impact of imidazolium-based ionic liquid surfactant additions on dilational rheology properties of different protein adsorption layer

The interfacial behavior of β-casein and BSA solutions have been investigated in the presence of imidazolium-based ionic liquid surfactant ([C₁₄mim]Br) at the decane/water interface with the oscillating the drop and interfacial tension relaxation measurements. Both the electrostatic and the hydrophobic interaction between protein and [C₁₄mim]Br played crucial roles as [C₁₄mim]Br concentration increases. Furthermore, it was found that the dilational rheology parameters provided information of the adsorbed layers structure, and the dynamics properties of the adsorbed layers depend on the bulk [C₁₄mim]Br concentration. Moreover, with the concentration of [C₁₄mim]Br increasing, β-casein in the interfacial layer was subject to conformational changes where it gave space to [C₁₄mim]Br molecules in the form of co-adsorb; for BSA/[C₁₄mim]Br solutions, the globule protein BSA deformed and then co-adsorb with [C₁₄mim]Br molecules at the decane/water interface. These results will contribute to elucidation of the influence of the surfactant on the different structure proteins and the wide applications of protein/surfactant systems in practice.     

Ionic Liquid-Induced Structural and Activity Changes in Hen Egg White Lysozyme

Lysozyme crystals in the presence of 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim]BF₄), 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl), 1-butyl-3-methylimidazolium bromide([C₄mim]Br), and 1,3-dimethylimidazolium iodine([dmim]I) were prepared, and the influence of ionic liquids (ILs) on the structure and activity change of lysozyme was investigated. Fourier transform infrared spectroscopy revealed the major secondary structures of α-helix and β-sheet for lysozyme. It was interesting to note that increases of the band near 2,935 and 1,656 cm^?1 from Raman spectroscopy are attributed to the unfolding of lysozyme molecules. A shift in amide III from 1,230 to 1,270 cm^?1 in adding [dmim]I occurs, indicating a transformation from β-sheet to random coil. With regard to adding [C₄mim]BF₄, [C₄mim]Cl, and [C₄mim]Br, α-helix and β-sheet are the predominant structures for lysozyme. The activity study showed that the ILs used brought a positive effect. Especially, [dmim]I leads to a drastic increase in relative activity, and its value reaches 50 %.     

Micellization behavior of the ionic liquid lauryl isoquinolinium bromide in aqueous solution

The micellization behavior of the ionic liquid lauryl isoquinolinium bromide ([C₁₂iQuin]Br) in aqueous solution has been assessed using surface tension, electrical conductivity, and ¹H nuclear magnetic resonance (NMR) measurements. The results reveal that the critical micelle concentration (CMC) and constant surfactant tension (γ _cac) are lower than that of butyl isoquinolinium bromide ([C₄iQuin]Br), octyl isoquinolinium bromide ([C₈iQuin]Br, and lauryl pyridinium bromide ([C₁₂Pyr]Br). ¹H NMR spectra show the evidence of paralleled π-stacking of adjacent isoquinoline rings. To elucidate the effect of the π–π interactions on the aggregation process, thermodynamic parameters such as the standard free energy, enthalpy, and entropy of aggregation have been discussed. These parameters are evaluated from the CMC with temperature by fitting these values to expressions derived from a micellization thermodynamic model. The enthalpy–entropy compensation phenomenon has been observed in the micellization process of [C₁₂iQuin]Br in water, and the presence of isoquinoline cations is responsible for the decrease in the ΔH _mic ^? , compared with [C₁₂Pyr]Br which has the same alkyl chain and counter-ion.     

Abrasive Stripping Voltammetry in Room Temperature Ionic Liquids

We report on the abrasive stripping voltammetry (AbrSV) of six different solid compounds of widely different natures in room temperature ionic liquids (RTILs). Copper as a metal representative, Prussian blue as a typical inorganic complex, indigo as an organic dye model, and anthracene, pyrene, and 9,10‐diphenylanthracene as the typical representatives of aromatic hydrocarbons were chosen in this study. They were immobilized on a gold electrode surface by mechanical abrasion and their subsequent voltammetric measurements were carried out in the ionic liquid [C₄mim][NTf₂], 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide. The present work demonstrates that RTILs provide an excellent electrochemical solvent environment for abrasive stripping voltammetric analysis; in particular, the much wider potential windows in RTILs as compared to aqueous media greatly enhance the analytical applicability of the AbrSV technique.     

The salting-out effect and phase separation in aqueous solutions of tri-sodium citrate and 1-butyl-3-methylimidazolium bromide

The aim of this work is to obtain further evidence about the salting-out effect produced by the addition of tri-sodium citrate to aqueous solutions of water miscible ionic liquid 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]) by evaluating the effect of tri-sodium citrate on the thermodynamic properties of aqueous solutions of this ionic liquid. Experimental measurements of density and sound velocity at different temperatures ranging from (288.15 to 308.15) K, the refractive index at 308.15 K and the liquid–liquid phase diagram at different temperatures ranging from (288.15 to 338.15) K for aqueous solutions containing 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]) and tri-sodium citrate (Na₃Cit) are taken. The apparent molar volume of transfer of [C₄mim][Br] from water to aqueous solutions of Na₃Cit have positive values and it increases by increasing salt molality. Although at high IL molality, the apparent molar isentropic compressibility shows similar behaviour with that of the apparent molar volume. However at low concentrations of IL, the apparent molar isentropic compressibility of transfer of [C₄mim][Br] from water to aqueous solutions of Na₃Cit have negative values. The effects of temperature and the addition of Na₃Cit and [C₄mim][Br] on the liquid–liquid phase diagram of the investigated system have been studied. It was found that an increase in temperature caused the expansion of the one-phase region. The presence of Na₃Cit triggers a salting-out effect, leading to significant upward shifts of the liquid–liquid de-mixing temperatures of the system. The effect of temperature on the phase-forming ability in the system investigated has been studied based on a salting-out coefficient obtained from fitting the binodal values to a Setschenow-type equation for each temperature. Based on cloud point values, the energetics of the clouding process have been estimated and it was found that both of entropy and enthalpy are the driving forces for biphasic formation.     

Isolation and purification of alkaloids from the fruits of Macleaya cordata by ionic‐liquid‐modified high‐speed counter‐current chromatography

Macleaya cordata (Willd) R. Br. is a medicinal plant. The most important bioactive compounds of M. cordata are alkaloids that have many biological activities including antifungal, anti‐inflammatory, and antitumor. In this study, an ionic‐liquid‐modified high‐speed counter‐current chromatography method was established to obtain alkaloids from the fruits of M. cordata. The conditions of ionic‐liquid‐modified high‐speed counter‐current chromatography, including solvent systems, the content of ionic liquid (1‐butyl‐3‐methylimidazolium tetrafluoroborate [C₄mim][BF₄]), and the posttreatment of the ionic liquid, were investigated. Five alkaloids protopine, allocryptopine, sanguinarine, 8‐O‐demethylchelerythrine, and chelerythrine were separated from the extract of the fruits using a high speed counter‐current chromatography with two‐phase solvent system composed of dichloromethane/methanol/0.3 mol/L hydrochloric acid aqueous solution/[C₄mim][BF₄] (4:2:2:0.015, v/v). Their purities were 96.33, 95.56, 97.94, 96.22, and 97.90%, respectively. The results indicated that a small amount of ionic liquids as modifier of the two‐phase solvent system could shorten the separation time and improve the separation efficiency of the alkaloids from the fruits. The ionic‐liquid‐modified high‐speed counter‐current chromatography would provide a feasible way for highly effective separation of alkaloids from natural products.