High-strength, healable, supramolecular polymer nanocomposites

A supramolecular polymer blend, formed via π-π interactions between a π-electron rich pyrenyl end-capped oligomer and a chain-folding oligomer containing pairs of π-electron poor naphthalene-diimide (NDI) units, has been reinforced with cellulose nanocrystals (CNCs) to afford a healable nanocomposite material. Nanocomposites with varying weight percentage of CNCs (from 1.25 to 20.0 wt %) within the healable supramolecular polymeric matrix have been prepared via solvent casting followed by compression molding, and their mechanical properties and healing behavior have been evaluated. It is found that homogeneously dispersed films can be formed with CNCs at less than 10 wt %. Above 10 wt % CNC heterogeneous nanocomposites were obtained. All the nanocomposites formed could be rehealed upon exposure to elevated temperatures although, for the homogeneous films, it was found that the healing rate was reduced with increasing CNC content. The best combination of healing efficiency and mechanical properties was obtained with the 7.5 wt % CNC nanocomposite which exhibited a tensile modulus enhanced by as much as a factor of 20 over the matrix material alone and could be fully rehealed at 85 °C within 30 min. Thus it is demonstrated that supramolecular nanocomposites can afford greatly enhanced mechanical properties relative to the unreinforced polymer, while still allowing efficient thermal healing.     

Self‐Healable Organogel Nanocomposite with Angle‐Independent Structural Colors

Structural colors have profound implications in the fields of pigments, displays and sensors, but none of the current non‐iridescent photonic materials can restore their functions after mechanical damage. Herein, we report the first self‐healable organogel nanocomposites with angle‐independent structural colors. The organogel nanocomposites were prepared through the co‐assembly of oleophilic silica nanoparticles, silicone‐based supramolecular gels, and carbon black. The organogel system enables amorphous aggregation of silica nanoparticles and the angle‐independent structural colors in the nanocomposites. Moreover, the hydrogen bonding in the supramolecular gel provides self‐healing ability to the system, and the structural colored films obtained could heal themselves in tens of seconds to restore storage modulus, structural color, and surface slipperiness from mechanical cuts or shear failure repeatedly.     

Mechanical Robust and Self‐Healable Supramolecular Hydrogel

Development of self‐healing polymers with spontaneous self‐healing capability and good mechanical performance is highly desired and remains a great challenge. Here, mechanical robust and self‐healable supramolecular hydrogels have been fabricated by using poly(2‐dimethylaminoethyl methacrylate) brushes modified silica nanoparticles (SiO₂@PDMAEMA) as multifunctional macrocrosslinkers in a poly(acrylic acid) (PAA) network structure. The SiO₂ nanoparticles serve as noncovalent crosslinkers, dissipating energy, whereas the electrostatic interactions between cationic PDMAEMA and anionic PAA render the hydrogel self‐healing property. This process provides a simple and broadly applicable strategy to produce mechanical strong and self‐healable materials.

     

Developing a Self‐Healing Supramolecular Nucleoside Hydrogel Based on Guanosine and Isoguanosine

Recently, supramolecular hydrogels have attracted increasing interest owing to their tunable stability and inherent biocompatibility. However, only few studies have been reported in the literature on self‐healing supramolecular nucleoside hydrogels, compared to self‐healing polymer hydrogels. In this work, we successfully developed a self‐healing supramolecular nucleoside hydrogel obtained by simply mixing equimolar amounts of guanosine (G) and isoguanosine (isoG) in the presence of K⁺. The gelation properties have been studied systematically by comparing different alkali metal ions as well as mixtures with different ratios of G and isoG. To this end, rheological and phase diagram experiments demonstrated that the co‐gel not only possessed good self‐healing properties and short recovery time (only 20 seconds) but also could be formed at very low concentrations of K⁺. Furthermore, nuclear magnetic resonance (NMR), powder X‐ray diffraction (PXRD), and circular dichroism (CD) spectroscopy suggested that possible G₂isoG₂‐quartet structures occurred in this self‐healing supramolecular nucleoside hydrogel. This co‐gel, to some extent, addressed the problem of isoguanosine gels for the applications in vivo, which showed the potential to be a new type of drug delivery system for biomedical applications in the future.     

Multiblock Copolymer‐Based Dual Dynamic Disulfide and Supramolecular Crosslinked Self‐Healing Networks

A new multiblock copolymer self‐healing strategy is reported that centers on the synthesis of block copolymers designed with different self‐healing motifs incorporated into individual blocks. As a proof of concept, a novel pentablock copolymer (ABCBA) consisting of a poly(ethylene glycol) middle block and self‐healable symmetric blocks of a polymethacrylate with pendant disulfide linkages and carboxylic acids is synthesized by a combination of consecutive controlled radical polymerization with hydrolytic cleavage. Disulfide exchange reactions of pendant disulfide linkages and metal–ligand interactions of pendant carboxylic acids with ferric ions allow for the formation of dual crosslinked networks with dynamic disulfide and supramolecular crosslinkages. The resultant networks possessing self‐healing viscoelasticity enable self‐healing on macroscale damages through supramolecular metal–ligand interactions and disulfide exchange reactions at room or moderate temperatures. These preliminary results suggest that the strategy can offer the versatility in the development of multifunctional self‐healable materials in dual or multiple self‐healable mechanisms.

     

Carbon Nanotube Reinforced Supramolecular Hydrogels for Bioapplications

Nanocomposite hydrogels based on carbon nanotubes (CNTs) are known to possess remarkable stiffness, electrical, and thermal conductivity. However, they often make use of CNTs as fillers in covalently cross‐linked hydrogel networks or involve direct cross‐linking between CNTs and polymer chains, limiting processability properties. Herein, nanocomposite hydrogels are developed, in which CNTs are fillers in a physically cross‐linked hydrogel. Supramolecular nanocomposites are prepared at various CNT concentrations, ranging from 0.5 to 6 wt%. Incorporation of 3 wt% of CNTs leads to an increase of the material's toughness by over 80%, and it enhances electrical conductivity by 358%, compared to CNT‐free hydrogel. Meanwhile, the nanocomposite hydrogels maintain thixotropy and processability, typical of the parent hydrogel. The study also demonstrates that these materials display remarkable cytocompatibility and support cell growth and proliferation, while preserving their functional activities. These supramolecular nanocomposite hydrogels are therefore promising candidates for biomedical applications, in which both toughness and electrical conductivity are important parameters.     

Mechanically reinforced chitosan/cellulose nanocrystals composites with good transparency and biocompatibility

Chitosan/cellulose nanocrystals(CS/CNCs) composites were prepared with different contents of CNCs. Due to the homogeneous dispersion of CNCs and the strong interfacial interactions resulting from hydrogen bonding between CS chains and CNCs, the transparency of CS is well retained and the overall mechanical properties of CS are significantly improved. Furthermore, because both CS and CNCs are biocompatible materials, cell proliferation test shows that the obtained composites are noncytotoxic and can potentially meet safety requirements of biomedical applications. These advantages pave the way of potential applications of CS in the field of commercial plastics and encourage the use of CS as environmentfriendly material and biomedical material.     

Reinforcement of Self‐Healing Polyacrylic Acid Hydrogel with Acrylamide Modified Microcrystalline Cellulose†

Self‐healing hydrogel such as polyacrylic acid (PAA) hydrogel has attracted increasing attention based on its promising potential applications. However, it usually suffers from low strength especially as mechanical device. Herein, a commercial microcrystalline cellulose (MCC) was modified with acrylamide to graft polyacrylamide (PAM) chains on the particle surface. The acrylamide‐modified MCC (AM‐MCC) was then dispersed in monomer solution of acrylic acid to prepare composite hydrogel. The mechanical properties of the obtained composite hydrogels and the self‐healed hydrogels were carefully measured by compressive and tensile tests, and by dynamic mechanical analysis. Our results demonstrate that introduction of a small amount of AM‐MCC such as 3 wt% can not only reinforce the original hydrogel and the healed hydrogel markedly, but also improve self‐healing efficiency obviously. The analyses indicate that in addition to the reversible multi‐interactions such as hydrogen bonding and ionic interactions, the entanglements between the PAA chains of the hydrogel matrix and the PAM chains grafted on the MCC particles have also played an important role on the improvement in mechanical performances and the healing ability of the hydrogel. Moreover, the responsiveness to exterior ion has been tested to indicate potential application of the composite hydrogel as self‐healable sensor.     

An Intrinsically Self‐Healing NiCo||Zn Rechargeable Battery with a Self‐Healable Ferric‐Ion‐Crosslinking Sodium Polyacrylate Hydrogel Electrolyte

Self‐healing solid‐state aqueous rechargeable NiCo||Zn batteries are inherently safe and have a high energy density and mechanical robustness. However, the self‐healability of solid‐state batteries has only been realized by a few studies in which electron/ion‐inactive self‐healable substrates are utilized. This arises from the lack of self‐healable electrolytes. Now an intrinsically self‐healing battery has been designed that utilizes a new electrolyte that is intrinsically self‐healable. Sodium polyacrylate hydrogel chains are crosslinked by ferric ions to promote dynamic reconstruction of an integral network. These non‐covalent crosslinkers can form ionic bonds to reconnect damaged surfaces when the hydrogel is cut off, providing an ultimate solution to the intrinsic self‐healability problem of batteries. As a result, this NiCo||Zn battery with this hydrogel electrolyte can be autonomically self‐healed with over 87 % of capacity retained after 4 cycles of breaking/healing.     

Advanced Materials Based on Polymers and Ionic Liquids

Ionic liquids (ILs) are ambient temperature molten salts, which have attracted considerable attention owing to their unique properties. In this contribution, we review advanced materials composed of ILs and polymers for the basis of a new design protocol to fabricate novel materials. As electrolytes for electrochemical devices, cross‐linked polymers containing ILs (ion gels) are endowed with functional properties inherited from ILs and mechanical consistency derived from polymers. To create such materials, micro‐phase separation of block copolymers and colloidal arrays in the ILs are utilized. Based on the molecular design of task‐specific ILs, the resultant ion gels are applicable as electrolytes for actuator, fuel cell, and secondary battery applications. Thermo‐ and photo‐responsive polymers in ILs are also highlighted, whereby such stimuli elicit changes in the solubility of the self‐assembly of block copolymers and colloidal arrays in the ILs. Further, thermo‐ and photo‐reversible changes in the self‐assembled structure can be exploited to demonstrate sol‐gel transitions and fabricate photo‐healable materials.     

Graphene‐polymer nanocomposites for biomedical applications

Despite the significant efforts in the synthesis of new polymers, the mechanical properties of polymer matrices can be considered modest in most cases, which limits their application in demanding areas. The isolation of graphene and evaluation of its outstanding properties, such as high thermal conductivity, superior mechanical properties, and high electronic transport, have attracted academic and industrial interest, and opened good perspectives for the integration of graphene as a filler in polymer matrices to form advanced multifunctional composites. Graphene‐based nanomaterials have prompted the development of flexible nanocomposites for emerging applications that require superior mechanical, thermal, electrical, optical, and chemical performance. These multifunctional nanocomposites may be tailored to synergistically combine the characteristics of both components if proper structural and interfacial organization is achieved. The investigations carried out in this aim have combined graphene with different polymers, leading to a variety of graphene‐based nanocomposites. The extensive research on graphene and its functionalization, as well as polymer graphene composites, aiming at applications in the biomedical field, are reviewed in this paper. An overview of the polymer matrices adequate for the biomedical area and the production techniques of graphene composites is presented. Finally, the applications of such nanocomposites in the biomedical field, particularly in drug delivery, wound healing, and biosensing, are discussed.     

Functional Materials from Cellulose‐Derived Liquid‐Crystal Templates

Cellulose nanocrystals (CNCs), known for more than 50 years, have attracted attention because of their unique properties such as high specific strength and modulus, high surface area, and fascinating optical properties. Just recently, however, their potential in supramolecular templating was identified by making use of their self‐assembly behavior in aqueous dispersions in the presence of compatible precursors. The combination of the mesoporosity, photonic properties, and chiral nematic order of the materials, which are available as freestanding films, has led to a significant number of interesting and promising discoveries towards new functional materials. This Review summarizes the use of cellulose derivatives, especially CNCs, as novel templates and gives an overview of the recent developments toward new functional materials.     

In situ polymerization and characterization of elastomeric polyurethane-cellulose nanocrystal nanocomposites. Cell response evaluation

Polyurethane/Cellulose nanocrystal (CNC) nanocomposites have been prepared by means of in situ polymerization using CNCs as precursors of polyurethane chains. Thermal, mechanical and morphological characterization has been analyzed to study the effect of CNC on the micro/nanostructure, which consisted of individualized nanocellulose crystallites covalently bonded to hard and soft segments of polyurethane. The incorporation of low CNC content led to a tough material whereas higher amount of CNC provoked an increase in soft and hard segments crystallization phenomenon. Moreover, from the viewpoint of polyurethane and polyurethane nanocomposites applications focused on biomedical devices, biocompatibility studies can be considered necessary to evaluate the influence of CNC on the biological behaviour. SEM micrographs obtained from cells seeded on top of the materials showed that L-929 fibroblasts massively colonized the materials surface giving rise to good substrates for cell adhesion and proliferation and useful as potential materials for biomedical applications.     

Nanofibrillar Stimulus‐Responsive Cholesteric Microgels with Catalytic Properties

We report composite stimulus‐responsive cholesteric catalytically active microgels derived from filamentous supramolecular building blocks: cellulose nanocrystals (CNCs). The variation in the microgel dimensions and pitch in response to the change in ambient conditions was governed by the polymer component. The cholesteric morphology of the microgels resulted from the self‐organization of CNCs in spherical confinement. The microgels exhibited excellent structural integrity and functioned as microreactors in catalytic hydrolysis reactions and in the synthesis of metal nanoparticles. Because of these collective properties, the reported microgels show much promise for application in the design of functional responsive materials.     

Bioinspired Healable Mechanochromic Function from Fluorescent Polyurethane Composite Film

Camouflage and wound healing are two vital functions for cephalopods to survive from dangerous ocean risks. Inspired by these dual functions, herein, we report a new type of healable mechanochromic (HMC) material. The bifunctional HMC material consists of two tightly bonded layers. One layer is composed of polyvinyl alcohol (PVA) and titanium dioxide (TiO₂) for shielding. Another layer contains supramolecular hydrogen bonding polymers and fluorochromes for healing. The as-synthesized HMC material exhibits a tunable and reversible mechanochromic function due to the strain-induced surface structure of composite film. The mechanochromic function can be further restored after damage because of the incorporated healable polyurethane. The healing efficiency of the damaged HMC materials can even reach 98 % at 60 °C for 6 h. The bioinspired HMC material is expected to have potential applications in the information encryption and flexible displays.     

Supramolecular elastomers: Switchable mechanical properties and tuning photohealing with changes in supramolecular interactions

To study light‐triggered self‐healing in supramolecular materials, we synthesized supramolecular thermoplastic elastomers with mechanical properties that were reversibly modulated with temperature. By changing the supramolecular architecture, we created polymers with different temperature responses. Detailed characterization of the hydrogen‐bonding material revealed dramatically different temperature and mechanical stress response due to two different stable states with changes in the hydrogen bonding interactions. A semi‐crystalline state showed no response to oscillatory shear deformations while the melt state behaved as a typical energy dissipative material with a clear crossover between storage and loss moduli. Comparison studies on heat generation after light excitation revealed no differences in photo‐thermal conversion when an Fe(II)‐phenanthroline chromophore was either physically blended into the H‐bonding polymer or covalently attached to the supramolecular network. These materials showed healing of scratches with light‐irradiation, as long as the overlap of material absorbance and laser excitation was sufficient. Differences in the efficiency and rate of photohealing were observed, depending on the type of supramolecular interaction, and these were attributed to the differences in the thermal response of the materials' moduli. Such results provide insight into how materials can be designed with chromophores and supramolecular bonding interactions to tune the light‐healing efficiency of the materials. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1003–1011     

Synergistic Covalent and Supramolecular Polymers for Mechanically Robust but Dynamic Materials

Nature has engineered delicate synergistic covalent and supramolecular polymers (CSPs) to achieve advanced life functions, such as the thin filaments that assist in muscle contraction. Constructing artificial synergistic CSP materials with bioinspired mechanically adaptive features, however, represents a challenging goal. Here, we report an artificial CSP system to illustrate the integration of a covalent polymer (CP) and a supramolecular polymer (SP) in a synergistic fashion, along with the emergence of notable mechanical and dynamic properties which are unattainable when the two polymers are formed individually. The synergistic effect relies on the peculiar network structures of the SP and CPs, which endow the resultant CSPs with overall improved mechanical performance in terms of the stiffness, strength, stretchability, toughness, and elastic recovery. Moreover, the dynamic properties of the SP, including self‐healing, stimuli‐responsiveness, and reprocessing, are also retained in the CSPs, thus leading to their application as programmable and tunable materials.     

Comparative study on the properties of poly(trimethylene terephthalate) ‐based nanocomposites containing multi‐walled carbon (MWCNT) and tungsten disulfide (INT‐WS2) nanotubes

Multi‐walled carbon (MWCNT) and tungsten disulfide (INT‐WS₂) nanotubes are materials with excellent mechanical properties, high electrical and thermal conductivity. These special properties make them excellent candidates for high strength and electrically conductive polymer nanocomposite applications. In this work, the possibility of the improvement of mechanical, thermal and electrical properties of poly(trimethylene terephthalate) (PTT) by the introduction of MWCNT and INT‐WS₂ nanotubes was investigated. The PTT nanocomposites with low loading of nanotubes were prepared by in situ polymerization method. Analysis of the nanocomposites' morphology carried out by SEM and TEM has confirmed that well‐dispersed nanotubes in the PTT matrix were obtained at low loading (<0.5 wt%). Thermal and thermo‐oxidative stability of nanocomposites was not affected by the presence of nanotubes in PTT matrix. Loading with INT‐WS₂ up to 0.5 wt% was insufficient to ensure electrical conductivity of PTT nanocomposite films. In the case of nanocomposites filled with MWCNT, it was found that nanotube incorporation leads to increase of electrical conductivity of PTT films by 10 orders of magnitude, approaching a value of 10^?3 S/cm at loading of 0.3 wt%. Tensile properties of amorphous and semicrystalline (annealed samples) nanocomposites were affected by the presence of nanotubes. Moreover, the increase in the brittleness of semicrystalline nanocomposites with the increase in MWCNT loading was observed, while the nanocomposites filled with INT‐WS₂ were less brittle than neat PTT. Copyright © 2016 John Wiley & Sons, Ltd.     

Self‐Healing Polymers via Supramolecular Forces

As polymers and polymeric materials are “the” smart invention and technological driving force of the 20th century, the quest for self‐healing or self‐repairing polymers is strong. The concept of supramolecular self‐healing materials relies on the use of noncovalent, transient bonds to generate networks, which are able to heal the damaged site, putting aspects of reversibility and dynamics of a network as crucial factors for the understanding and design of such self‐healing materials. This Review describes recent examples and concepts of supramolecular polymers based on hydrogen bonding, π–π interactions, ionomers, and coordinative bonds, thus convincingly discussing the advantages and versatility of these supramolecular forces for the design and realization of self‐healing polymers.     

Molecular Springs: Integration of Complex Dynamic Architectures into Functional Devices

Molecular/supramolecular springs are artificial nanoscale objects possessing well‐defined structures and tunable physicochemical properties. Like a macroscopic spring, supramolecular springs are capable of switching their nanoscale conformation as a response to external stimuli by undergoing mechanical spring‐like motions. This dynamic action offers intriguing opportunities for engineering molecular nanomachines by translating the stimuli‐responsive nanoscopic motions into macroscopic work. These nanoscopic objects are reversible dynamic multifunctional architectures which can express a variety of novel properties and behave as adaptive nanoscopic systems. In this Minireview, we focus on the design and structure–property relationships of supramolecular springs and their (self‐)assembly as a prerequisite towards the generation of novel dynamic materials featuring controlled movements to be readily integrated into macroscopic devices for applications in sensing, robotics, and the internet of things.