Preparation of NiO decorated CNT/ZnO core-shell hybrid nanocomposites with the aid of ultrasonication for enhancing the performance of hybrid supercapacitors

Supercapacitor (SC) electrodes fabricated with the combination of carbon nanotubes (CNTs) and metal oxides are showing remarkable advancements in the electrochemical properties. Herein, NiO decorated CNT/ZnO core-shell hybrid nanocomposites (CNT/ZnO/NiO HNCs) are facilely synthesized by a two-step solution-based technique for the utilization in hybrid supercapacitors. Benefitting from the synergistic advantages of three materials, the CNT/ZnO/NiO HNCs based electrode has evinced superior areal capacity of ~67 µAh cm⁻² at a current density of 3 mA cm⁻² with an exceptional cycling stability of 112% even after 3000 cycles of continuous operation. Highly conductive CNTs and electrochemically active ZnO contribute to the performance enhancement. Moreover, the decoration of NiO on the surface of CNT/ZnO core-shell increases the electro active sites and stimulates the faster redox reactions which play a vital role in augmenting the electrochemical properties. Making the use of high areal capacity and ultra-long stability, a hybrid supercapacitor (HSC) was assembled with CNT/ZnO/NiO HNCs coated nickel foam (CNT/ZnO/NiO HNCs/NF) as positive electrode and CNTs coated NF as negative electrode. The fabricated HSC delivered an areal capacitance of 287 mF cm⁻² with high areal energy density (67 µWh cm⁻²) and power density (16.25 mW cm⁻²). The combination of battery type CNT/ZnO/NiO HNCs/NF and EDLC type CNT/NF helped in holding the capacity for a long period of time. Thus, the systematic assembly of CNTs and ZnO along with the NiO decoration enlarges the application window with its high rate electrochemical properties.     

Optimisation of the ultrasound-assisted extraction of betalains and polyphenols from Amaranthus hypochondriacus var. Nutrisol

The present study optimised the ultrasound-assisted extraction (UAE) of bioactive compounds from Amaranthus hypochondriacus var. Nutrisol. Influence of temperature (25.86–54.14 °C) and ultrasonic power densities (UPD) (76.01–273.99 mW/mL) on total betalains (BT), betacyanins (BC), betaxanthins (BX), total polyphenols (TP), antioxidant activity (AA), colour parameters (L*, a*, and b*), amaranthine (A), and isoamaranthine (IA) were evaluated using response surface methodology. Moreover, betalain extraction kinetics and mass transfer coefficients (K_La) were determined for each experimental condition. BT, BC, BX, TP, AA, b*, K_La, and A were significantly affected (p < 0.05) by temperature extraction and UPD, whereas L*, a*, and IA were only affected (p < 0.05) by temperature. All response models were significantly validated with regression coefficients (R²) ranging from 87.46 to 99.29%. BT, A, IA, and K_La in UAE were 1.38, 1.65, 1.50, and 29.93 times higher than determined using conventional extraction, respectively. Optimal UAE conditions were obtained at 41.80 °C and 188.84 mW/mL using the desired function methodology. Under these conditions, the experimental values for BC, BX, BT, TP, AA, L*, a*, b*, K_La, A, and IA were closely related to the predicted values, indicating the suitability of the developed quadratic models. This study proposes a simple and efficient UAE method to obtain betalains and polyphenols with high antioxidant activity, which can be used in several applications within the food industry.     

Ultrasonic potential in maintaining the quality and reducing the microbial load of minimally processed pomegranate

Difficulty of Pomegranate fruit peeling and arils separation are the main motivations of progressive ready-to-eat pomegranate fresh arils industry. Also, extracted pomegranate arils are highly perishable due to water loss and microbial contamination expose. The aim of the current work was then to evaluate the effect of ultrasound for 15 and 30 min on maintenance of bioactive compounds and microbial load reduction of pomegranate arils cv. Rabbab. Treated arils were kept at 5 °C and analyzed during 15 days of storage. The most and least weight loss of arils obtained in control and 30 min treated samples, respectively. After 12 days of storage, all samples were decayed except those treated for 15 and 30 min. The ultrasound treatment significantly prevented degradation of anthocyanin and ascorbic acid compounds. Total phenol and antioxidant activity decreased during storage. At the end of storage, the most total phenol content (3898.6 mg GAE L⁻¹) was found in arils treated for 30 min whereas the most anthocyanin (91.93 mg L⁻¹), total antioxidant activity (82.65%), and ascorbic acid (2.53 mg L⁻¹) were found in arils treated for 15 min. Ultrasound treated arils had lower microbial load (total mesophilic bacteria in control and 30-min treated samples) in each stage during storage. At the end of storage, the microbial load in treated and control arils was 0.7 and 0.2 Log CFU g⁻¹, respectively). Overall, ultrasound treatment effectively reduced weight loss and preserved bioactive compounds during storage.     

Observation of fallout deposition in an outdoor swimming pool 50 km away from the Fukushima Daiichi nuclear power plant

After the accident at the Fukushima Daiichi nuclear power plant (NPP), outdoor school swimming pools at Fukushima were decontaminated to curb the redistribution of radioactivity into downstream farmlands. In the process, the radioactivity concentrations of the pool water and sediment substances (residue) were measured to estimate the deposition density of the fallout. At a pool situated 50 km away from the NPP, the average concentrations of radiocesium (^134+137Cs) for the water and residue were quantified as 170 Bq L⁻¹ and 3.6 × 10⁵ Bq kg⁻¹, respectively. Taking account of the radioactivity concentrations and of the water balance in and around the pool, the deposition density of radiocesium, as of August 2011, was precisely determined to be 0.32 ± 0.03 MBq m⁻² (k = 1). The density corroborated the previous results obtained by other methods, i.e., airborne surveys, in-situ Ge surveys and soil samplings at neighboring locations. Other than radiocesium, the only gamma-emitting nuclide detected was ^110mAg, with a concentration of 560 Bq kg⁻¹ in the residue. The radioactivity concentrations of ⁸⁹Sr, ⁹⁰Sr, ²³⁸Pu and ^239+240Pu in the water were all less than the minimum detectable activities – 2, 0.1, 0.002 and 0.002 Bq L⁻¹, respectively.     

Effect of ultrasound and chlorine dioxide on Salmonella Typhimurium and Escherichia coli inactivation in poultry chiller tank water

This study evaluated the application of ultrasound alone or combined with chlorine dioxide (ClO₂) for Salmonella Typhimurium and Escherichia coli inactivation in poultry processing chiller tank water. A Full Factorial Design (FFD) 2² was conducted for each microorganism to evaluate the effect of ultrasound exposure time (x₁: 1 to 9 min; fixed: 37 kHz; 330 W; 25 °C) using a bath, and ClO₂ concentration (x₂: 1 to 17 mg L⁻¹) on microorganism count expressed in log CFU mL⁻¹ in distilled water. Variable x₂ had a negative effect on Salmonella Typhimurium (-5.09) and Escherichia coli (-2.00) count, improving the inactivation; while a x₁ increase present no inactivation improvement, explaining the use of x₁ lower level (1 min) and x₂ higher level (17 mg L⁻¹). The best condition for microorganism inactivation based on FFD was evaluated in chiller tank water (with organic matter) at 25, 16, and 4 °C; x₁ was kept (1 min), however x₂ was adjusted to obtain the same residual free chlorine (2.38 mg L⁻¹) considering the ClO₂ consumption by organic matter, achieving the value of 30 mg L⁻¹. An inactivation of 49% and 31% were observed for Salmonella Typhimurium and Escherichia coli. When ultrasound was replaced by a simple agitation in the presence of ClO₂, there was no inactivation for both microorganisms. Moreover, at poultry carcass pre-chilling (16 °C) and chilling (4 °C) conditions, the synergism of ultrasound combined with ClO₂ was more pronounced, with microorganisms’ reductions up to 100%.     

A study of electrical enhancement of polycrystalline MgZnO/ZnO bi-layer thin film transistors dependence on the thickness of ZnO layer

A polycrystalline MgZnO/ZnO bi-layer was deposited by using a RF co-magnetron sputtering method and the MgZnO/ZnO bi-layer TFTs were fabricated on the thermally oxidized silicon substrate. The performances with varying the thickness of ZnO layer were investigated. In this result, the MgZnO/ZnO bi-layer TFTs which the content of Mg is about 2.5 at % have shown the enhancement characteristics of high mobility (6.77–7.56 cm² V⁻¹ s⁻¹) and low sub-threshold swing (0.57–0.69 V decade⁻¹) compare of the ZnO single layer TFT (μ_FE = 5.38 cm² V⁻¹ s⁻¹; S.S. = 0.86 V decade⁻¹). Moreover, in the results of the positive bias stress, the ΔV_on shift (4.8 V) of MgZnO/ZnO bi-layer is the 2 V lower than ZnO single layer TFT (ΔV_on = 6.1 V). It reveals that the stability of the MgZnO/ZnO bi-layer TFT enhanced compared to that of the ZnO single layer TFT.     

Ultrasound-assisted conversion of tannic acid to gallic acid as a strategy to obtain value-added products

In this work, ultrasound was applied for the conversion of tannic acid into gallic acid using only diluted H₂O₂ as reagent. Experiments were carried out using several types of ultrasonic horns operating at 20 kHz (VC750W processor). The following experimental conditions were evaluated: H₂O₂ concentration (0.2 to 8.5 mol L⁻¹), horn type (10 to 25 mm of diameter), ultrasound amplitude (20 to 70%), sonication time (10 to 45 min), tannic acid concentration (170 to 1360 mg L⁻¹), and reaction temperature (50 to 90 °C). Gallic acid production was monitored with ultra-performance liquid chromatography with high-resolution time-of-flight mass spectrometry (UPLC-ToF-MS). The isolated gallic acid was confirmed with nuclear magnetic resonance (¹H and ¹³C NMR). It is important to emphasize that this study was developed as a proof of concept to demonstrate the potential of ultrasound for tannic acid conversion into gallic acid using just diluted H₂O₂. Under selected conditions gallic acid production yield was 128 ± 4 mg g⁻¹ of initial tannic acid (using 170 mg L⁻¹ of tannic acid as starting material). Reaction time was set as 30 min, which was carried out using 1 mol L⁻¹ H₂O₂ and ultrasound amplitude of 50% at 90 °C. At silent conditions (mechanical stirring, from 100 to 1000 rpm), gallic acid production was halved (less than 78 ± 4 mg g⁻¹ of initial tannic acid).     

Contact resistance of multi-walled carbon nanotube/natural rubber nanocomposites with metallic ball

This paper reports on the contact resistance (R_c) between carbon filler/natural rubber (NR) nanocomposite and gold ball: three varieties of nanocomposites were prepared from carbon black (CB) and two kinds of multi-walled carbon nanotubes (MWCNTs) with different diameter. R_c of MWCNT/NR nanocomposite was remarkably less than that of CB/NR nanocomposites. The relationship between R_c of MWCNT/NR nanocomposites and applied load was expressed in the formula, R_c=C·P⁻ⁿ (P: load, C and n: constant): for the MWCNTs (diameters of 13 nm)/NR and MWCNTs (diameters of 67 nm)/ NR nanocomposites, they were expressed as R_c=1724·P^−0.6 and R_c=344·P^−0.37, respectively. The former (MWCNT, ϕ13 nm) showed higher R_c than the latter (MWCNT, ϕ67 nm) over whole region of applied load. The mechanical hardness of the former was higher (90 HsA) than that of the latter (82 HsA). Therefore, the smaller contact area between the nanocomposite and gold ball of the former resulted in higher R_c. The apparent specific contact resistivity was calculated from the observed values of R_c and contact area: 130 Ω mm² and 127 Ω mm² for the former (MWCNT, ϕ13 nm) and the latter (MWCNT, ϕ67 nm), respectively.     

Application of ZnO nanorods loaded on activated carbon for ultrasonic assisted dyes removal: Experimental design and derivative spectrophotometry method

A method based on application of ZnO nanorods loaded on activated carbon (ZnO-NRs-AC) for adsorption of Bromocresol Green (BCG) and Eosin Y (EY) accelerated by ultrasound was described. The present material was synthesized under ultrasound assisted wet-chemical method and subsequently was characterized by FE-SEM, TEM, BET and XRD analysis. The extent of contribution of conventional variables like pH (2.0–10.0), BCG concentration (4–20 mg L⁻¹), EY concentration (3–23 mg L⁻¹), adsorbent dosage (0.01–0.03 g), sonication time (1–5 min) and centrifuge time (2–6 min) as main and interaction part were investigated by central composite design under response surface methodology. Analysis of variance (ANOVA) was adapted to experimental data and guide the best operational conditions mass by set at 6.0, 9 mg L⁻¹, 10 mg L⁻¹, 0.02 g, 4 and 4 min for pH, BCG concentration, EY concentration, adsorbent dosage, sonication and centrifuge time, respectively. At these specified conditions dye adsorption efficiency was higher than 99.5%. The suitability and well prediction of optimum point was tested by conducting five experiments and respective results revel that RSD% was lower than 3% and high quality of fitting was confirmed by t-test. The experimental data were best fitted in Langmuir isotherm equation and the removal followed pseudo second order kinetics. The experimentally obtained maximum adsorption capacities were estimated as 57.80 and 61.73 mg g⁻¹ of ZnO-NRs-AC for BCG and EY respectively from binary dye solutions. The mechanism of removal was explained by boundary layer diffusion via intraparticle diffusion.     

Pyridine-thermal synthesis and high catalytic activity of CeO2/CuO/CNT nanocomposites

Carbon nanotubes (CNTs) were controllably coated with the uninterrupted CuO and CeO₂ composite nanoparticles by a facile pyridine-thermal method and the high catalytic performance for CO oxidation was also found. The obtained nanocomposites were characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction as well as X-ray photoelectron spectroscopy. It is found that the CuO/CeO₂ composite nanoparticles are distributed uniformly on the surface of CNTs and the shell of CeO₂/CuO/CNT nanocomposites is made of nanoparticles with a diameter of 30-60 nm. The possible formation mechanism is suggest as follows: the surface of CNTs is modified by the pyridine due to the π-π conjugate role so that the alkaline of pyridine attached on the CNT surface is more enhanced as compared to the one in the bulk solvent, and thus, these pyridines accept the proton from the water molecular preferentially, which result in the formation of the OH⁻ ions around the surface of CNTs. Subsequently, the metal ions such as Ce³⁺ and Cu²⁺ in situ react with the OH⁻ ions and the resultant nanoparticles deposit on the surface of CNTs, and finally the CeO₂/CuO/CNT nanocomposites are obtained. The T₅₀ depicting the catalytic activity for CO oxidation over CeO₂/CuO/CNT nanocomposites can reach ∼113 °C, which is much lower than that of CeO₂/CNT or CuO/CNT nanocomposites or CNTs.     

Ultrasonically assisted removal of Congo Red,Phloxine B and Fast green FCF in ternary mixture using novel nanocomposite following their simultaneous analysis by derivative spectrophotometry

In this study dependency of simultaneous adsorption of Congo Red (CR), Phloxine B (BP) and Fast green FCF (FG) onto CuS/ZnS nanocomposites loaded on activated carbon (CuS/ZnS-NCs-AC) to pH, adsorbent mass, sonication time and initial dyes concentration were modeled and optimized, while CuS/ZnS-NCs-AC was identified by XRD, FESEM and EDS analysis. CR, PB and FG concentration determination were undertaken by first and second order derivative spectrophotometry in ternary mixture. According to central composite design (CCD) based on desirability function (DF), the best experimental conditions was set as pH 6.0, 0.02 g CuS/ZnS-NCs-AC, 5 min sonication time, 15 mg L⁻¹ for PB and 10 mg L⁻¹ for other dyes. Conduction of experiments to above conditions lead to highest dyes removal efficiency of 99.72, 98.8 and 98.17 for CR, PB and FG, respectively. The adsorption data efficiently fitted by Langmuir isotherm model, while the order of maximum adsorption capacity (Q_max) for PB (128.21 mg g⁻¹) > CR (88.57 mg g⁻¹) > FG (73.40 mg g⁻¹) is related to their different structure and charges. Kinetics of process was efficiently explained according to pseudo-second-order kinetic in cooperation of Weber and Morris based on intraparticle diffusion.     

Facile hydrothermal synthesis of ultrahigh-aspect-ratio V2O5 nanowires for high-performance supercapacitors

Ultrahigh-aspect-ratio V₂O₅ nanowires were successfully prepared using [VO(O₂)₂(OH₂)]⁻ as the starting material by a template-free hydrothermal route without the addition of organic surfactant or inorganic ions. The prepared samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmet–Teller (BET), cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD). The results revealed that the peroxovanadium (V) complexes can be easily transformed to V₂O₅ nanowires by this hydrothermal route. The uniform nanowires were with width about 50 nm and length about dozens of micron. The BET analysis showed the V₂O₅ nanowires had a high specific surface area of 25.6 m² g⁻¹. The synthesized V₂O₅ nanowires performed a high capacitance of 351 F g⁻¹ when used as supercapacitor electrode in 1 mol L⁻¹ LiNO₃.     

Ultrasonic assisted-Fenton-like degradation of nitrobenzene at neutral pH using nanosized oxides of Fe and Cu

Ultrasonic-assisted heterogeneous Fenton reaction was used for degradation of nitrobenzene (NB) at neutral pH conditions. Nano-sized oxides of α-Fe₂O₃ and CuO were prepared, characterized and tested in degradation of NB (10 mg L⁻¹) under sonication of 20 kHz at 25 °C. Complete degradation of NB was effected at pH 7 in presence of 10 mM H₂O₂ after 10 min of sonication in presence of α-Fe₂O₃ (1.0 g L⁻¹), (k = 0.58 min⁻¹) and after 25 min in case of CuO (k = 0.126 min⁻¹). α-Fe₂O₃ showed also effective degradation under the conditions of 0.1 g L⁻¹ oxide and 5.0 mM of H₂O₂, even though with a lower rate constant (0.346 min⁻¹). Sonication plays a major role in enhancing the production of hydroxyl radicals in presence of solid oxides. Hydroxyl radicals-degradation pathway is suggested and adopted to explain the differences noted in rate constants recorded on using different oxides.     

Ultrasound-assisted green synthesis of Ru supported on LDH-CNT composites as an efficient catalyst for N-ethylcarbazole hydrogenation

N-ethylcarbazole/dodecahydro-N-ethylcarbazole (NEC/12H-NEC) is one of the most attractive LOHCs, and it is of great significance to develop catalysts with high activity and reduce the hydrogen storage temperature. Layered double hydroxides-carbon nanotubes composites (LDH-CNT) were synthesized by a simple in-situ assembly method. Due to the introduction of CNT, a strong interaction occurred between LDH and CNT, which effectively improved the electron transfer ability of LDH-CNT. Ru/LDH-CNT catalysts were prepared via ultrasound-assisted reduction method without adding reducing agents and stabilizers. Under the cavitation effect of ultrasound, the hydroxyl groups on the surface of LDH were excited to generate hydrogen radicals (•H) with high reducibility, which successfully reduced Ru³⁺ to Ru NPs. Ru/LDH-3.9CNT-(300-1) catalyst was of 1.63 nm average Ru particle size with CNT amount of 3.9 wt% and the ultrasonic power of 300 W at 1 h, and its electron transfer resistance was less than that of Ru/LDH-(300-1). The synergy of ultrafine Ru NPs and fast electron transfer made it exhibit exceptional catalytic performance in NEC hydrogenation. Even if the reaction temperature was lowered to 80 °C, its hydrogenation performance was better than that of commercial Ru/Al₂O₃ catalyst at 120 °C. The ultrasound-assisted method is efficient, green and environmentally friendly, and the operation process is simple and economical. It is expected to be used in practical industrial production, which provides a reference for the preparation of high-activity and low-temperature hydrogen storage catalysts.     

SnO2-decorated multiwalled carbon nanotubes and Vulcan carbon through a sonochemical approach for supercapacitor applications

Multiwalled carbon nanotubes (MWCNTs) and Vulcan carbon (VC) decorated with SnO₂ nanoparticles were synthesized using a facile and versatile sonochemical procedure. The as-prepared nanocomposites were characterized by means of transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Fourier transform infra red spectroscopy. It was evidenced that SnO₂ nanoparticles were uniformly distributed on both carbon surfaces, tightly decorating the MWCNTs and VC. The electrochemical performance of the nanocomposites was evaluated by cyclic voltammetry and galvanostatic charge/discharge cycling. The as-synthesized SnO₂/MWCNTs nanocomposites show a higher capacity than the SnO₂/VC nanocomposites. Concretely, the SnO₂/MWCNTs electrodes exhibit a specific capacitance of 133.33 F g⁻¹, whereas SnO₂/VC electrodes exhibit a specific capacitance of 112.14 F g⁻¹ measured at 0.5 mA cm⁻² in 1 M Na₂SO₄.     

The impact of ultrasonic parameters on the exfoliation of NiFe LDH nanosheets as electrocatalysts for the oxygen evolution reaction in alkaline media

The ultrasonic process has been examined to exfoliate layered materials and upgrade their properties for a variety of applications in different media. Our previous studies have shown that the ultra-sonication treatment in water without chemicals has a positive influence on the physical and electrochemical performance of layered materials and nanoparticles. In this work, we have probed the impact of ultrasonication on the physical properties and the oxygen evolution reaction (OER) of the NiFe LDH materials under various conditions, including suspension concentration (2.5–12.5 mg mL⁻¹), sonication times (3–20 min) and amplitudes (50–90%) in water, in particular, sonication times and amplitudes. We found that the concentration, amplitude and time play significant roles on the exfoliation of the NiFe LDH material. Firstly, the NiFe LDH nanosheets displayed the best OER performance under ultrasonic conditions with the concentration of 10 mg mL⁻¹ (50% amplitude and 15 min). Secondly, it was revealed that the exfoliation of the NiFe LDH nanosheets in a short time (<10 min) or a higher amplitudes (≥80%) has left a cutdown on the OER activity. Comprehensively, the optimum OER activity was displayed on the exfoliated NiFe LDH materials under ultrasonic condition of 60% (amplitude), 10 mg mL⁻¹ and 15 min. It demanded only 250 mV overpotentials to reach 10 mA cm⁻² in 1 M KOH, which was 100 mV less than the starting NiFe LDH material. It was revealed from the mechanism of sonochemistry and the OER reaction that, after exfoliation, the promoted OER performance is ascribed to the enriched Fe³⁺ at the active sites, easier oxidation of Ni²⁺ to Ni³⁺, and the strong electrical coupling of the Ni²⁺ and Fe³⁺ during the OER process. This work provides a green strategy to improve the intrinsic activity of layered materials.     

Effect of Ge doping on the electrical properties of amorphous Zn–Sn–O thin films

We report the effect of germanium doping on the active layer of amorphous Zinc–Tin-Oxide (a-ZTO) thin film transistor (TFT). Amorphous thin film samples were prepared by RF magnetron sputtering using single targets composed of Zn₂Ge_0.05Sn_0.95O₄ and Zn₂SnO₄ with variable oxygen contents in the sputtering gases. In comparison with undoped, Ge-doped a-ZTO films exhibited five order of magnitude lower carrier density with a significantly higher Hall-mobility, which might be due to suppressed oxygen vacancies in the a-ZTO lattice since the Ge substituent for the Sn site has relatively higher oxygen affinity. Thus, the bulk and interface trap densities of Ge-doped a-ZTO film were decreased one order of magnitude to 7.047 × 10¹⁸ eV⁻¹cm⁻³ and 3.52 × 10¹¹ eV⁻¹cm⁻², respectively. A bottom-gate TFT with the Ge-doped a-ZTO active layer showed considerably improved performance with a reduced SS, positively shifted V_th, and two orders of magnitude increased I_on/I_off ratio, attributable to the doped Ge ions.     

Radon exhalation and gamma radioactivity levels in soil and radiation hazard assessment in the surrounding area of National Thermal Power Corporation,Dadri (U.P.), India

In the present study soil samples were collected from the region around a National Thermal Power Corporation (NTPC) at Dadri (U.P.), India. Radon activity and radon exhalation rates were measured by using “sealed can technique” using LR 115-type II nuclear track detectors. Radon activities are found to vary from 177.5 ± 23.1 to 583.4 ± 4.9 Bq m⁻³ with an average value of 330.5 ± 30.4 Bq m⁻³. Surface exhalation rates in these samples vary from 63.9 ± 8.3 to 210.2 ± 15.1 mBq m⁻² h⁻¹ with an average value of 119.1 ± 11.1 mBq m⁻² h⁻¹, whereas mass exhalation rates vary from 2.5 ± 0.3 to 8.1 ± 0.6 mBq kg⁻¹ h⁻¹ with an average of 4.6 ± 0.4 mBq kg⁻¹ h⁻¹.Activity concentrations of naturally occurring radionuclides (²²⁶Ra, ²³²Th and ⁴⁰K) were also measured in these soil samples using high resolution γ–ray spectroscopic system. Activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K vary from 32.2 ± 6.0 to120.9 ± 4.5 Bq kg⁻¹, 19.3 ± 0.9 to 44.6 ± 1.5 Bq kg⁻¹ and 195.4 ± 2.8 to 505.4 ± 6.3 Bq kg⁻¹ with overall mean values of 70.0 ± 8.9 Bq kg⁻¹, 34.8 ± 1.2 Bq kg⁻¹ and 436.1 ± 5.6 Bq kg⁻¹ respectively. From the activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K, radium equivalent activity (Ra_eq) and the external hazard index (H_ex) were calculated and found to vary from 73.4 to 214.7 Bq kg⁻¹ and from 0.2 to 0.6 respectively.     

Structural,optical and electrical properties of CuSCN nano-powders doped with Li for optoelectronic applications

Pure and Li-doped CuSCN nano-powders were prepared using an in situ method. Structural, optical and electrical properties of the prepared samples were investigated using X-ray diffraction (XRD), UV–Visible spectrophotometer and simple electrical circuit. XRD measurements showed that all pure and doped samples with 1%–7% Li have the hexagonal structures. The crystallite size of CuSCN decreased from 39.46 nm to 36.42 nm with increasing Li concentration from 0 to 7%. The values of direct and indirect optical band gap energies of pure and Li-doped CuSCN nano-powders were calculated. Direct optical band gap energy increased from 3.60 eV to 4.20 eV and indirect optical band gap energy increased from 2.36 eV to 3.20 eV by doping CuSCN with Li. The dc electrical conductivity was calculated at room temperature for all prepared CuSCN samples. Electrical conductivity decreased from 6.04 × 10⁻⁸ (Ω.cm)⁻¹ to 2.82 × 10⁻⁸ (Ω.cm)⁻¹ with increasing Li concentration from 0 to 7%. The optoelectronic performance of CuSCN was improved by doping with Li. As a result, Li-doped CuSCN could be a good candidate material as a window layer and as a hole transport layer (HTL) for producing more efficient solar cells.     

Sonophotocatalytic inactivation of E. coli using ZnO nanofluids and its mechanism

The present study evaluated inactivation efficiency of a sonophotocatalytic process using ZnO nanofluids including ultrasonic parameters such as power density, frequency and time. The result showed that inactivation efficiency was increased by 20% when ultrasonic irradiation was combined with photocatalytic process in the presence of natural light. Comparison of inactivation efficiency in photocatalytic, ultrasonic and sonocatalytic processes using Escherichia coli as a model bacteria identified that inactivation efficiencies are shown in the following order: ultrasonic irradiation < sonocatalysis < photocatalysis < sonophotocatalysis. Furthermore, inactivation mechanism of sonophotocatalysis was proposed. Studies of reactive oxygen species (ROS) and zinc ions (Zn²⁺) release evaluation revealed that ROS play a key role in bacterial inactivation rather than Zn²⁺. Permeability of outer membrane (OM) and inner membrane (IM) of E. coli bacterial cells were studied and exhibited that sonophotocatalysis increased the permeability of OM and IM significantly. The enhanced bacterial inactivation effect in sonophotocatalytic process contributed to acoustic cavitation, sonocatalysis of ZnO and sonoporation phenomenon.