Raman and FTIR spectroscopy study of LiFeTiO<Subscript>4</Subscript> and Li<Subscript>2</Subscript>FeTiO<Subscript>4</Subscript>

We report the Fourier transform infrared (FTIR)–Raman spectroscopy study of spinel Li–Fe–Ti–O oxides viz., LiFeTiO₄ and Li₂FeTiO₄ in order to probe structural details such as type of bonding networks viz., octahedral and tetrahedral, and type of different atomic bonds present in those materials. Both the samples were prepared through solid-state reaction route prior to high-energy ball-milling. All the phases prepared through solid-state reaction and ball-milled were probed using X-ray diffraction, field emission scanning electron microscopy, and FTIR–Raman spectroscopy. X-ray diffraction study indicates spinel phase formation with Fd3m space group symmetry for both LiFeTiO₄ and Li₂FeTiO₄. However, pure phase of Li₂FeTiO₄ was not achieved in these preparation routes, rather mixed phases of Li₂FeTiO₄ and Fe₂TiO₄ were achieved. Field emission scanning electron microscopy (FESEM) analysis indicated porous microstructure for LiFeTiO₄ while more agglomerated microstructure for Li₂FeTiO₄. Ball-milling reduces the grain size partly for both the samples. FTIR–Raman spectroscopy indicates the presence of LiO₄ tetrahedral, LiO₆ and TiO₆ octahedral in the spinel network. Presence of Li–Li–O type bonding was also indicated from spectroscopy analysis. Existence of Fe₂TiO₄ phase with Li₂FeTiO₄ was also identified from both FTIR and Raman spectrum. Effect of ball-milling on the spectrum has been exhibited by broadening and peak shifting the FTIR–Raman spectrum, arising from the enhanced lattice strain and structural disorder.     

Synthesis,structure, and electrochemistry of Ag-modified LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> cathode materials for lithium-ion batteries

The composite of silver-modified lithium manganese oxide were prepared using thermal decomposition method of different mole ratio. Structural characterization was carried out by X-ray diffraction (XRD). XRD analysis revealed different patterns as the content of the dopant in the spinel increases. Phase analysis shows that Ag particles were dispersed on the LiMn₂O₄ surface instead of entering the spinel structure. On the other hand, the electrochemical behavior of cathode powder was examined by using two-electrode test cells consisting of a cathode, metallic lithium as anode, and a solid polymer electrolyte of 0.87PEO-0.13LiCF₃SO₃-0.10DBP. According to the electrochemical tests results, the influence of the Ag additive content on the electrochemical properties of Ag/LiMn₂O₄ composites is clearly shown.     

Lithium polyacrylate-coated LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> cathode materials with excellent performance for lithium ion batteries

A novel facile approach to coat LiMn₂O₄ by lithium polyacrylate (PAALi) is demonstrated. The PAALi-coated LiMn₂O₄ (LMO@2%PAALi) and LiMn₂O₄ (LMO) are characterized by charge–discharge tests, X-ray diffraction (XRD), PAALi dissolving experiment, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG), and inductively coupled plasma optical emission spectrometer (ICP-OES). XRD and FTIR analyses indicate that there are no clear differences between LMO@2%PAALi and LMO. PAALi dissolving experiment indicates that PAALi is indissolvable in LiPF₆-EC/DMC/EMC electrolyte. TEM results reveal that LiMn₂O₄ particles are coated by PAALi. ICP-OES results indicate that this stable PAALi coating can prevent the Mn ions dissolving from active LiMn₂O₄ materials and then the stability of LiMn₂O₄ crystals in electrolyte are greatly enhanced. These unique features ensure that LMO@2%PAALi possesses much better rate performance, higher discharge capacity, better cycling performance, and lower charge transfer resistance over LMO. The discharge capacity of LMO@2%PAALi at 0.2 C reaches up to 127.2 mAh g^?1 at room temperature.     

Preparation and characterization of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> nanorod by low heating solid state coordination method

Cathode material LiMn₂O₄ nanorod was prepared by annealing of the mixed precursor which was synthesized by low heating solid state coordination method using lithium acetate, manganese acetate and oxalic acid as starting materials. The structures and morphologies of the LiMn₂O₄ nanorod were investigated as a function of annealing temperature and time. The results showed that all samples in different annealing temperatures and time have the same spinel structure. The higher the annealing temperature is, the more complete the crystal structure forms, and the larger the particle size is. In addition, the electrochemical properties of the LiMn₂O₄nanorod were studied in this paper.     

ZnO-coated LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> cathode material for lithium-ion batteries synthesized by a combustion method

ZnO-coated LiMn₂O₄ cathode materials were prepared by a combustion method using glucose as fuel. The phase structures, size of particles, morphology, and electrochemical performance of pristine and ZnO-coated LiMn₂O₄ powders are studied in detail by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), galvanostatic charge-discharge test, and X-ray photoelectron spectroscopy (XPS). XRD patterns indicated that surface-modified ZnO have no obvious effect on the bulk structure of the LiMn₂O₄. TEM and XPS proved ZnO formation on the surface of the LiMn₂O₄ particles. Galvanostatic charge/discharge test and rate performance showed that the ZnO coating could improve the capacity and cycling performance of LiMn₂O₄. The 2 wt% ZnO-coated LiMn₂O₄ sample exhibited an initial discharge capacity of 112.8 mAh g^?1 with a capacity retention of 84.1 % after 500 cycles at 0.5 C. Besides, a good rate capability at different current densities from 0.5 to 5.0 C can be acquired. CV and EIS measurements showed that the ZnO coating effectively reduced the impacts of polarization and charge transfer resistance upon cycling.     

Influence of Sm<Superscript>3+</Superscript> ion in structural,morphological, and electrochemical properties of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> synthesized by microwave calcination

LiSm_xMn_2–xO₄ samples were synthesized via co-precipitation technique. The structural properties of the synthesized materials were studied using X-ray diffraction analysis and it confirmed the cubic spinel structure for all the compounds. The lattice parameter of LiMn₂O₄ was observed to be 8.2347 Ǻ and it decreased with Sm³⁺ concentration, due to the shrinkage in cell volume aided by higher binding energy between Sm-O bond. The SEM micrographs were analyzed using Image processing software (Image-J) to ascertain the pore and grain properties. The microwave synthesis had been observed to control the bulk grain formation and had yielded lesser porous and nanoparticles. The particle size distributions obtained through photocross correlation laser diffraction analysis had shown that LiMn₂O₄ with 60 nm and Sm-doped compounds with ∼30 nm, respectively. The cyclic voltammetry studies had revealed the decrease in electrocatalytic behavior in the initial cycle for compounds doped with Sm³⁺ ion. The initial capacities of LiMn₂O₄, LiSm_0.05Mn_1.95O₄ and LiSm_0.10Mn_1.90O₄ substituted compounds were observed to be 134.87 mAhg⁻¹, 132.22 mAhg⁻¹ and 126.41 mAhg⁻¹, respectively. The cells were simulated using 1D model namely Dualfoil5.1 program. The simulated results coincide well with the measured results. The cycle life studies reveal 93% capacity retention of samarium-0.05-doped samples when compared with 78.4% of the LiMn₂O₄.     

Elevated electrochemical property of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> originated from nano-sized Mn<Subscript>3</Subscript>O<Subscript>4</Subscript>

By employment of nano-sized pre-prepared Mn₃O₄ as precursor, LiMn₂O₄ particles have been successfully prepared by facile solid state method and sol-gel route, respectively. And the reaction mechanism of the used precursors of Mn₃O₄ is studied. The structure, morphology, and element distribution of the as-synthesized LiMn₂O₄ samples are characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). Compared with LiMn₂O₄ synthesized by facile solid state method (SS-LMO), LiMn₂O₄ synthesized by modified sol-gel route (SG-LMO) possesses higher crystallinity, smaller average particle size (~175 nm), higher lithium chemical diffusion coefficient (1.17 × 10^?11 cm² s^?1), as well as superior electrochemical performance. For example, the cell based on SG-LMO can deliver a capacity of 85.5 mAh g^?1 at a high rate of 5 °C, and manifests 88.3% capacity retention after 100 cycles at 0.5 °C when cycling at 45 °C. The good electrochemical performance of the cell based on SG-LMO is ascribed mainly to its small particle size, high degree of dispersion, and uniform element distribution in bulk material. In addition, the lower polarization potential accelerates Li⁺ ion migration, and the lower atom location confused degree maintains integrity of crystal structure, both of which can effectively improve the rate capability and cyclability of SG-LMO.     

Investigation on the electrochemical performances of Li<Subscript>4</Subscript>Mn<Subscript>5</Subscript>O<Subscript>12</Subscript> for battery applications

In this study, well-crystallized Li₄Mn₅O₁₂ powder was synthesized by a self-propagating combustion method using citric acid as a reducing agent. Various conditions were studied in order to find the optimal conditions for the synthesis of pure Li₄Mn₅O₁₂. The precursor obtained was then annealed at different temperatures for 24 h in a furnace. X-ray diffraction results showed that Li₄Mn₅O₁₂ crystallite is stable at relatively low temperature of 400 °C but decompose to spinel LiMn₂O₄ and monoclinic Li₂MnO₃ at temperatures higher than 500 °C. The prepared samples were also characterized by FESEM and charge-discharge tests. The result showed that the specific capacity of 70.7 mAh/g was obtained within potential range of 4.2 to 2.5 V at constant current of 1.0 mA. The electrochemical performances of Li₄Mn₅O₁₂ material was further discussed in this paper.     

Magnetism of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> manganite in structurally ordered and disordered states

The specific features of the crystal structure and the magnetic state of stoichiometric lithium manganite in the structurally ordered Li[Mn₂]O₄ and disordered Li_{1 − δ}Mn_δ[Mn_{2 − δ}Li_δ]O₄ (δ = 1/6) states have been investigated using neutron diffraction, X-ray diffraction, and magnetic methods. The structurally disordered state of the manganite was achieved under irradiation by fast neutrons (E _eff ≥ 1 MeV) with a fluence of 2 × 10²⁰ cm⁻² at a temperature of 340 K. It has been demonstrated that, in the initial sample, the charge ordering of manganese ions of different valences arises at room temperature, which is accompanied by orthorhombic distortions of the cubic spinel structure, and the long-range antiferromagnetic order with the wave vector k = 2π/c(0, 0, 0.44) is observed at low temperatures. It has been established that the structural disordering leads to radical changes in the structural and magnetic states of the LiMn₂O₄ manganite. The charge ordering is destroyed, and the structure retains the cubic symmetry even at a temperature of 5 K. The antiferromagnetic type of ordering transforms into ferrimagnetic ordering with local spin deviations in the octahedral sublattice due to the appearance of intersublattice exchange interactions.     

Electrochemical properties of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> prepared with tartaric acid chelating agent

Lithium manganese oxide (LiMn₂O₄) has been prepared using sol-gel technique under acidic (pH = 5.8) and alkaline (pH = 9) conditions with tartaric acid as chelating agent. X-ray studies show that under acidic condition, an Mn₂O₃ peak was observed indicating the presence of impurities. No impurity was observed for LiMn₂O₄ under alkaline conditions. The particle size is mostly in the range of 124 to 185 nm from HR-TEM. The lithium diffusion coefficient, D _Li+ in LiMn₂O₄ is of the order 10^?9 cm² s^?1. By using density functional theory (DFT) calculations, structural properties have been obtained. The specific discharge capacity of the cells with LiMn₂O₄ prepared under alkaline condition and with LiMn₂O₄ prepared under acidic condition discharged at 0.5 C is in the ranges of 132 to 142 and 128 to 139 mAh g^?1, respectively.     

Synthesis,characterization, and cell performance of Li<Subscript>0.5</Subscript>FeV<Subscript>1.5</Subscript>O<Subscript>4</Subscript>

A Li_0.5FeV_1.5O₄ sample was synthesized using sol-gel route. The X-ray diffraction study indicates formation of spinel phase (with Fd3m space group) for this sample. LiO₄, LiO₆, and V-O bonds were identified from the Raman spectrum, while LiO₄ and Fe-O bonds were identified from the FTIR spectrum of this sample phase. The FESEM study indicates formation of inhomogeneous grains. The surface area of 74.39 m²/g was estimated from the Brunauer-Emmett-Teller (BET) surface area analysis technique. The cyclic voltammetry study of Li_0.5FeV_1.5O₄ indicates an anodic peak at 2.1 V while a cathodic peak at 1.98 V. The charge-discharge study exhibits two voltage plateaus respectively at 2.1 and at 4 V. Stable electrochemical capacity of 40 mAh/g for Li_0.5FeV_1.5O₄ was found for 30 cycles. The electrochemical impedance spectroscopy study indicates smaller bulk resistance and higher ionic diffusion, i.e., less Warburg impedance for this phase. An energy density of 89 Wh/kg, a power density of 33 W/kg, and a 90% Coulombic efficiency was achieved with relatively good cyclic stability from Li_0.5FeV_1.5O₄.     

Recent progress in the electrolytes for improving the cycling stability of LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> high-voltage cathode

High-voltage spinel LiNi_0.5Mn_1.5O₄ has been considered one of the most promising cathode materials for lithium-ion power batteries used in electrical vehicles (EVs) or hybrid electrical vehicles (HEVs) because the high voltage plateau at around 4.7 V makes its energy density (658 Wh kg^?1) 30 and 25 % higher than that of conventional pristine spinel LiMn₂O₄ (440 Wh kg^?1) or olivine LiFePO₄ (500 Wh kg^?1) materials, respectively. Unfortunately, LiNi_0.5Mn_1.5O₄-based batteries with LiPF₆-based carbonate electrolytes always suffer from severe capacity deterioration and poor thermostability because of the oxidization of organic carbonate solvents and decomposition of LiPF₆, especially at elevated temperatures and water-containing environment. The major goal of this review is to highlight the recent advancements in the development of advanced electrolytes for improving the cycling stability and rate capacity of LiNi_0.5Mn_1.5O₄-based batteries. Finally, an insight into the future research and further development of advanced electrolytes for LiNi_0.5Mn_1.5O₄-based batteries is discussed.     

One-step solid-state synthesis of nanosized LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> cathode material with power properties

A simple one-step solid state reaction way of preparing nanosized LiMn₂O₄ powders with high-rate properties is investigated. Oxalic acid is used as a functional material to lose volatile gases during the process of calcining in order to control the morphology and change the particle size of materials. The results of X-ray diffraction and scanning electron microscopy show that particle size of materials decreases with the increase of the oxalic acid content. The electrochemical test results indicate that optimal LiMn₂O₄ particles (S_0.5) is synthesized when the molar ratios of oxalic acid and total Mn source are 0.5:1. It also manifests that LiMn₂O₄ sample with middle size has the optimal electrochemical performance among five samples instead of the smallest LiMn₂O₄ sample. The obtained sample S_0.5 with middle size exhibits a high initial discharge capacity of 125.8 mAh g^?1 at 0.2C and 91.4% capacity retention over 100 cycles at 0.5C, superior to any one of other samples. In addition, when cycling at the high rate of 10C, the optimal S_0.5 in this work could still reach a discharge capacity of 80.8 mAh g^?1. This observation can be addressed to the fact that the middle size particles balance the contradictory of diffusion length in solid phase and particle agglomeration, which leads to perfect contacts with the conductive additive, considerable apparent Li-ion diffusion rate, and the optimal performance of S_0.5.     

Synthesis of MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> spinel nanoparticles using a mixture of bayerite and magnesium sulfate

This article reports a novel method to prepare MgAl₂O₄ spinel nanoparticles. By calcining a powder mixture of bayerite and magnesium sulfate at 800 °C and washing with water, single-phase MgAl₂O₄ spinel nanoparticles were prepared. The powder mixture and the calcined products were characterized by differential thermal and thermogravimetric analysis (DSC-TG), X-ray diffraction (XRD), transmission electron microscopy (TEM), and Brunauer–Emmett–Teller (BET) nitrogen-gas adsorption method. The obtained MgAl₂O₄ spinel nanoparticles have an average particle size of 12 nm, a narrow size distribution, and weak agglomeration. The specific surface area of the MgAl₂O₄ spinel powder is 110 m²/g. The formation of MgAl₂O₄ spinel is attributed to a solid-state reaction between γ-Al₂O₃ and MgSO₄.     

Magnetoreflection and Magnetostriction in Ferrimagnetic Spinels CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>

It is shown that magnetoreflectance of natural light up to +4% exists in magnetostrictive ferrimagnetic spinel CoFe₂O₄ single crystal; this effect is associated with a change of the fundamental absorption edge, the impurity absorption band, and the phonon spectrum under the action of a magnetic field. The correlation between the field dependences of magnetoreflectance and magnetostriction has been established. The physical mechanisms responsible for the spectral and field peculiarities of magnetoreflection have been explained. It is shown that the magnetorefractive effect in CoFe₂O₄, which is associated with magnetoelastic properties of the spinel, amounts to +1.5 × 10^–3 in magnetic fields exceeding the saturation field. Analysis of magnetooptical and magnetoelastic data has made it possible to estimate deformation potential as Ξ _u = 20 eV for the valence band of the spinel.     

Hexagonal-like NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> nanostructure based high-performance supercapacitor electrodes

A novel approach of double hydroxide-mediated synthesis of nickel cobaltite (NiCo₂O₄) electro-active material by the hydrothermal method is reported. The obtained NiCo₂O₄ electro-active material displays the spinel cubic phase and hexagonal-like morphology. Thermogravimetry analysis confirms the thermal stability of the electrode material. The functional groups and phase formation of NiCo₂O₄ have been confirmed by FT-IR and Raman spectral analysis. The modified NiCo₂O₄ electrode exhibits the highest specific capacitance of 767.5 F g^?1 at a current density of 0.5 A g^?1 in 3 M KOH electrolyte and excellent cyclic stability (94 % capacitance retention after 1000 cycles at a high current density of 5 A g^?1). The excellent electrochemical performance of the electrode is attributed to the hexagonal-like morphology, which contributes to the rich surface electro-active sites and easy transport pathway for the ions during the electrochemical reaction. The attractive Faradic behavior of NiCo₂O₄ electrode has been ascribed to the redox contribution of Ni²⁺/Ni³⁺ and Co²⁺/Co³⁺ metal species in the alkaline medium. The symmetrical two-electrode cell has been fabricated using the NiCo₂O₄ electro-active material with excellent electrochemical properties for supercapacitor applications.     

Surfactant-assisted synthesis of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> particles as high-rate and long-life cathode materials for lithium-ion batteries

Herein, we reported the synthesis of uniform LiMn₂O₄ submicroparticles by surfactant-assisted preparation of spherical MnCO₃ precursor followed by solid-state reaction. Polyethylene glycol (Mw = 1000) was used as surfactant to control the morphology and size of the MnCO₃ precursor as well as the MnO₂ intermediate and LiMn₂O₄ product. The influence of particle size, homogeneity, and crystallinity on the electrochemical performance of LiMn₂O₄ was intensively investigated. The test results indicate that the LiMn₂O₄ sample using polyethylene glycol with weight as 10% of reactants shows the best rate capability and long-term cyclability. Due to the homogeneous particles with the average size of ca. 250 nm and high crystallinity, the discharge capacities are as high as 125, 118, 114, and 100 mAh g^?1 at 1, 10, 20, and 50 C rates, respectively, along with high capacity retention of 74% after 1000 cycles at 20 C.     

An approach to improve the electrochemical performance of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> at high temperature

In order to overcome the severe capacity decay of LiMn₂O₄ at high temperature, TiN is used as an active materials additive in this paper. The XRD and XPS test results indicate that the TiN can effectively prevent Mn from dissolving in electrolyte; galvanostatic charge-discharge test shows that LiMn₂O₄ electrode with TiN exhibits remarkably improved capacity retention at high temperature with capacity of 105.1 mAh g^?1 at 1 C in the first cycle at 55 °C and the capacity maintains 88.9% retention after 150 cycles. And the electrochemical impedance spectroscopy result demonstrates TiN’s effectiveness in easing the increase of charge-transfer resistance during cycling. Therefore, we can conclude that TiN, as an addictive, made obvious contribution to the greatly improved electrochemical cycling performance of LiMn₂O₄.     

Investigation on structural characteristics of PVDF–AgCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocomposite solid polymer electrolyte system

There has been an increasing interest towards the incorporation of nanosize ceramic fillers in polymer electrolytes. Solid polymer electrolytes based on polyvinylidene fluoride (PVDF), silver triflate (AgCF₃SO₃), and x wt% of aluminum oxide (Al₂O₃) nanopowders (where x = 1, 3, 5, and 10, respectively) have been prepared using solution casting technique. The structural characteristics of these thin film specimens were studied using Fourier transform infrared (FTIR) and X-ray diffraction (XRD) patterns at room temperature. The appearance of new absorption bands and gradual shifts observed in some characteristic peaks confirmed the complex formation between polyvinylidene fluoride and silver triflate. Furthermore, the addition of nanosized filler Al₂O₃ has also indicated the interaction of the filler with the polymer salt complex. The XRD patterns obtained for all these samples in the 2θ range 10° to 70° showed the amorphous nature of these samples. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, December 7–9, 2006.     

Synthesis of macroporous LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> with avian egg membrane as a template

Avian eggshell membrane as a template for the synthesis of a macroporous network of crystalline LiMn₂O₄ is demonstrated. Well-formed crystals of average size 600 nm formed a network structure whose average pore size was 2–4 μm. The unique porous structure should make it an attractive cathode material for lithium-ion batteries. In fact, for an 80% cutoff in capacity retention, LiMn₂O₄ obtained by a 10-h calcination at 800°C sustained 83 cycles.