Syntheses, structures, and nonlinear optical properties of heteroselenometallic W-Se-Ag cluster compounds containing phosphine ligands

Treatment of [Et4N]2[WSe4] with a 1:1 mixture of AgNO3 and PCy3 (Cy = cyclohexyl) in the absence of iodide afforded a linear trinuclear compound [(mu-WSe4)(AgPCy3)2] (1). A similar reaction in the presence of iodide gave rise to the isolation of the cubanelike compound [(mu3-WSe4)Ag3(PCy3)3(mu3-I)] (2). Treatment of [Et4N]2[WSe4] with AgI in the presence of bidentate phosphine ligands bis(diphenylphosphino)amine (dppa) and bis(diphenylphosphino)methane (dppm) afforded the tetranuclear compounds [(mu3-WSe4)Ag3(mu-I)(mu-dppa)2] (3) and [(mu3-WSe4)Ag3(mu3-I)(mu-dppm)2] (4), respectively, which exhibit an open butterfly configuration. A novel hexanuclear cluster compound [(mu3-WSe4)2Ag4(mu-dppm)3] (5) was obtained from interaction of [Et4N]2[WSe4] with AgNO3 and dppm in the absence of iodide source. The above cluster compounds are electrically neutral and air-stable in both solution and the solid state and have been characterized by electronic, infrared, mass, and NMR spectroscopies. The solid-state structures of five cluster compounds have been established by X-ray crystallography. The nonlinear optical properties of compounds 4 and 5 were examined by z-scan techniques with 7 ns pulses at 532 nm. The optical limiting effects of compounds 1, 2, 4, and 5 were determined and compared with related argentoselenometallic compounds.     

Synthesis and Structural Characterization of [Cu(DMF)_6][(η~5-C_5Me_5)WS_3(CuBr)_3]_2·Et_2O

1 INTRODUCTION In the last decade, we have been interested in the synthesis of [PPh4][(h5-C5Me5)MS3] (M = Mo, W)[1, 2] , Whose organometallic trisulfido anions show high reactivity towards various transition metals[3~6] . We once reported that the reaction of [PPh4][(h5-C5Me5)WS3] with CuBr in CH3CN afforded a double incomplete-cubane cluster [PPh4]2[(h5-C5Me5)WS3(CuBr)3]2[3], while the analogous reaction of [PPh4][(h5-C5Me5)WS3] with CuBr in CHCl3 gave rise to a 揻our-…     

Mo(W)/Cu/S cluster-based supramolecular arrays assembled from preformed clusters [Et4N]4[WS4Cu4I6] and [(n-Bu)4N]2[MoOS3Cu3X3] (X = I, SCN) with flexible ditopic ligands

In our working toward the rational design and synthesis of cluster-based supramolecular architectures, a set of new [WS4Cu4]- or [MoOS3Cu3]-based supramolecular assemblies have been prepared from reactions of preformed cluster compounds [Et4N]4[WS4Cu4I6] (1) and [(n-Bu)4N]2[MoOS3Cu3X3] (2, X = I; 3, X = SCN) with flexible ditopic ligands such as dipyridylsulfide (dps), dipyridyl disulfide (dpds), and their combinations with dicyanamide (dca) anion and 4,4'-bipy. The cluster precursor 1 reacted with dps or dpds and sodium dicyanamide (dca) in MeCN to produce [WS4Cu4I2(dps)3].2MeCN (4.2MeCN) and [WS4Cu4(dca)2(dpds)2].Et2O.2MeCN (5.Et2O.2MeCN), respectively. On the other hand, treatment of 2 with dpds in DMF/MeCN afforded [MoOS3Cu3I(dpds)2].0.5DMF.2(MeCN)0.5 (6.0.5DMF.2(MeCN)0.5) while reaction of 3 with sodium dicyanamide (dca) and 4,4'-bipy in DMF/MeCN gave rise to [MoOS3Cu3(dca)(4,4'-bipy)1.5].DMF.MeCN (7.DMF.MeCN). Compounds 4.2MeCN, 5.Et2O.2MeCN, 6.0.5DMF.2(MeCN)0.5, and 7.DMF.MeCN have been characterized by elemental analysis, IR spectroscopy, and single-crystal X-ray crystallography. Compound 4 contains a 2D layer array made of the saddle-shaped [WS4Cu4] cores interlinked by three pairs of Cu-dps-Cu bridges. Compound 5 has another 2D layer structure in which the [WS4Cu4] cores are held together by four pairs of Cu-dca-Cu and Cu-dpds-Cu bridges. Compound 6 displays a 1D spiral chain structure built of the nido-like [MoOS3Cu3] cores via two pairs of Cu-dpds-Cu bridges. Compound 7 consists of a 2D staircase network in which each [MoOS3Cu3(4,4'-bipy]2 dimeric unit interconnects with four other equivalent units by a pair of 4,4'-bipy ligands and two pairs of dca anions. The [WS4Cu4] core in 4 or 5 and the [MoS3Cu3] core in 7 show a planar 4-connecting node and a seesaw-shaped 4-connecting node, respectively, which are unprecedented in cluster-based supramolecular compounds. The successful assembly of 4-7 from the three cluster precursors 1-3 through flexible ditopic ligands provides new routes to the rational design and construction of complicated cluster-based supramolecular arrays.     

Construction of symmetric and asymmetric Mo/S/Cu clusters from a cluster precursor [Et4N]2[(edt)2Mo2S2(mu-S)2] (edt = ethanedithiolate)

Treatment of [Et 4N] 2[(edt) 2Mo 2S 2(mu-S) 2] ( 1) (edt = ethanedithiolate) with equimolar CuBr afforded an anionic hexanuclear cluster [Et 4N] 2[(edt) 2Mo 2(mu-S) 3(mu 3-S)Cu] 2.2CH 2Cl 2 ( 2.2CH 2Cl 2). On the other hand, reactions of 1 with 2 equiv of CuBr in the presence of 1,2-bis(diphenylphosphino)methane (dppm) and pyridine (Py) ligands gave rise to two neutral tetranuclear clusters [(edt) 2Mo 2O 2(mu-S) 2Cu 2(dppm) 2] ( 3) and [(edt) 2Mo 2O(mu 3-S)(mu-S) 2Cu 2(Py) 4] ( 4), respectively. The reaction of 1 with 2 equiv of CuBr followed by the addition of a mixture of dppm and Py (molar ratio = 1:2) yielded another neutral tetranuclear cluster [(edt) 2Mo 2(mu-S) 2(mu 3-S) 2Cu 2(dppm)(Py)].Py ( 5.Py). Compounds 2- 5 have been characterized by elemental analysis, UV-vis spectra, IR spectra, (1)H NMR, and X-ray analysis. The structure of the dianion of 2 can be viewed as having a [Mo 4S 8Cu 2] core in which two chemically equivalent [Mo 2(mu-S) 3(mu 3-S)(edt) 2Cu] (-) anions are linked by two extra Cu-S edt bonds. The molecular structure of 3 may be visualized as being built of one [(edt) 2Mo 2X 2(mu-S) 2] (2-) dianion and one [Cu 2(dppm) 2] (2+) dication that are connected by a pair of M-mu-S edt bonds. Compound 4 is formed by the affiliation of two Cu(I) atoms only at one end of the [(edt) 2Mo 2S 2(mu-S) 2] moiety, connecting with the S t atoms and the S edt atom. Cluster 5.Py can be viewed as being constructed from the addition of one Cu atom onto the incomplete cubanelike [Mo 2S 4Cu] framework through one terminal sulfur and one edt sulfur. Among the four clusters, 3 and 4 have internal mirror symmetry or pseudo mirror symmetry, respectively, while 2 and 5 are asymmetric clusters with racemic formation.     

Versatility of heterocyclic thioamides in the construction of a trinuclear cluster [Cu3I3(dppe)3 (SC5H4NH)] and Cu(I) linear polymers {Cu6(SC5H4NH)6I6}n x 2nCH3CN and {Cu(I)6 (SC3H6N2)6X6}n (X = Br, I)

Reaction of copper(I) iodide with pyridine-2-thione (2-SC5H4NH) and 1,2-bis(diphenylphosphino)ethane (dppe) in a CH3CN-CHCl3 mixture yielded a triangular cluster, [Cu3I3(mu2-P,P-dppe)3 (eta1-SC5H4NH)], 1. Similar reaction with 2-SC5H4NH and a series of diphosphanes, Ph2P-X-Ph2P {X = -CH2- (dppm), -(CH2)3- (dppp), -(CH2)4- (dppb), -CH=CH- (dppen)}, gave a novel iodo-bridged hexanuclear Cu(I) linear polymer,{Cu6(mu3-SC5H4NH)4 (mu2-SC5H4NH)2 (I4)(mu-I)2-}n x 2nCH3CN, 2. Reactions of copper(I) iodide/copper(I) bromide with 1,3-imidazolidine-2-thione (SC3H6N2) in a CH3CN-CHCl3 mixture yielded hexanuclear Cu(I) linear chain polymers, [{Cu6(mu3-SC3H6N2)2 (mu2-SC3H6N2)4X2 (mu-X)4}n] (X = Br, 4; I, 5). In compound 1, two iodide atoms and one dppe form the dinuclear Cu(mu2-I)2 (mu2-dppe)Cu core, and two dppe ligands bridge this core with the third Cu(I) center coordinated to 2-SC5H4NH via the S atom. The chain polymer 2 has a centrosymmetric hexanuclear central core, Cu6S6I4 (mu-I)2--, formed by dimerization of six-membered trinuclear motifs, Cu3(mu2-SC3H6N2)3I3 via (mu3-S) bonding modes of the thione ligand, and has four terminal and two bridging iodine atoms in trans-orientations. Linear chains are separated by the nonbonded acetonitrile molecules. In 4 and 5, three copper(I) bromide or copper(I) iodide moieties and three SC3H6N2 ligands combined via bridging S donor atoms to form the six-membered trinuclear Cu3(mu2-SC3H6N2)3I3 cores which polymerized via S and X atoms in a side-on fashion to form linear chain polymers, [{Cu6(mu3-SC3H6N2)2 (mu2-SC3H6N2)4X2(mu-X)4}n]. The (mu3-S) modes of bonding of neutral heterocyclic thioamides are first examples, as are trinuclear cluster and linear polymers rare examples in copper chemistry.     

Construction of a novel copper(I) chain polymer of hexanuclear Cu6(2-SC5H4NH)6I6 cores with a new (mu 3-S) mode of bonding of pyridine-2-thione and of an unusual triangular Cu3I3(dppe)3(2-SC5H4NH) cluster

The reactions of copper(I) iodide with pyridine-2-thione (2-SC(5)H(4)NH) in the presence of a series of diphosphane ligands, Ph(2)P[bond]X[bond]Ph(2)P [X = [bond](CH(2))(m)[bond], m = 1(dppm), 2 (dppe), 3 (dppp), 4 (dppb); [bond]CH[double bond]CH[bond] (dppen)], yielded an iodo-bridged hexanuclear Cu(I) linear polymer, [Cu(6)(mu(3)-SC(5)H(4)NH)(4)(mu(2)-SC(5)H(4)NH)(2)(I(4))(mu-I)(2)-](n).2nCH(3)CN (1). A similar reaction with 1,2-bis(diphenylphosphino)ethane (dppe) and 2-SC(5)H(4)NH yielded a triangular cluster, Cu(3)I(3)(dppe)(3)(2-SC(5)H(4)NH), 2. In the chain polymer 1, three Cu(I) iodide and three 2-SC(5)H(4)NH ligands combined via bridging S donor atoms to form a boat-shaped trinuclear Cu(3)S(3)I(3) core, and two such cores combined in an inverse manner via four S-donor atoms (mu(3)-S) to form a centrosymmetric hexanuclear repeat unit, Cu(6)S(6)I(4)(mu-I)(2-), which finally formed the iodo-bridged infinite linear chain polymer 1. Linear chains are separated by the nonbonded acetonitrile molecules. Polymer 1 is the first such example of a linear chain formed by the hexanuclear Cu(6)S(6)I(6) core in copper chemistry as well as in metal-heterocyclic thioamide chemistry. In addition, it has the first mu(3)-S mode of neutral pyridine-2-thione ever reported. In the moiety Cu(3)I(3)(dppe)(3) of 2, two copper(I) centers are bridged by the iodide ligands forming a Cu(mu-I)(2)Cu core, while a third copper(I) center is terminally bonded to another iodide ligand. Polymer 2 is also rare, and the first triangular cluster of Cu(I) with an heterocyclic thioamide.     

Acetic acid induced self-assembly of supramolecular compounds [Et4N]3[(WS4Cu2)2(mu-CN)3].2MeCN and [PPh4][WS4Cu3(mu-CN)2].MeCN from preformed clusters [A]2[WS4(CuCN)2] (A = Et4N, PPh4)

Reactions of two preformed trinuclear W/Cu/S clusters, [A](2)[WS(4)(CuCN)(2)] (1: A = Et(4)N; 2: A = PPh(4)), with different concentrations of acetic acid in MeCN generate two interesting 2D polymeric clusters [Et(4)N](3)[(WS(4)Cu(2))(2)(mu-CN)(3)].2MeCN (3), and [PPh(4)][WS(4)Cu(3)(mu-CN)(2)].MeCN (4), respectively. Compound 4 can also be readily obtained in a high yield from the reaction of 2 with equimolar [Cu(MeCN)(4)]PF(6) in MeCN. These compounds have been characterized by elemental analysis, IR spectra, thermal analysis, and single-crystal X-ray diffraction. An X-ray analysis reveals that compound 3 retains the WS(4)Cu(2) cluster core, which serves as a 3-connecting node to link equivalent nodes via single cyanide bridges, forming an anionic 2D (6,3) net. Compound 4 consists of a T-shaped WS(4)Cu(3) core, which also acts as a 3-connecting node, with links to 3 equivalent clusters either through single or double cyanide bridges, affording a different anionic 2D (6,3) network. The acetic acid induced aggregation of 3 and 4 from the two cluster precursors 1 and 2 suggests that this simple synthetic strategy is likely to be applicable to many related systems.     

Construction of [(eta5-C5Me5)WS3Cu3]-based supramolecular compounds from preformed incomplete cubane-like clusters [PPh4][(eta5-C5Me5)WS3(CuX)3] (X = CN, Br)

Approaches to the assembly of (eta5-C5Me5)WS3Cu3-based supramolecular compounds from two preformed incomplete cubane-like clusters [PPh4][(eta5-C5Me5)WS3(CuX)3] (X = CN, 1a; X = Br, 1b) have been investigated. Treatment of 1a with LiBr/1,4-pyrazine (1,4-pyz), pyridine (py), LiCl/py, or 4,4'-bipyridine (4,4'-bipy) and treatment of 1b with 4,4'-bipy gave rise to a new set of W/Cu/S cluster-based compounds, [Li[((eta5-C5Me5)WS3Cu3(mu3-Br))2(mu-CN)3].C6H6]infinity (2), [(eta5-C5Me5)WS3Cu3(mu-CN)2(py)]infinity (3), [[PPh4][(eta5-C5Me5)WS3Cu3(mu3-Cl)(mu-CN)(CN)].py]infinity (4), [PPh4]2[(eta5-C5Me5)WS3Cu3(CN)2]2(mu-CN)2.(4,4'-bipy) (5), and [[(eta5-C5Me5)WS3Cu3Br(mu-Br)(4,4'-bipy)].Et2O]infinity (6). The structures of 2-6 have been characterized by elemental analysis, IR spectra, and single-crystal X-ray crystallography. Compound 2 displays a 1D ladder-shaped chain structure built of square-like [[(eta5-C5Me5)WS3Cu3(mu3-Br)(mu-CN)]4](mu-CN)2(2-) anions via two pairs of Cu-mu-CN-Cu bridges. Compound 3 consists of a single 3D diamond-like network in which each (eta5-C5Me5)WS3Cu3 unit, serving as a tetrahedral node, interconnects with four other nearby units through Cu-mu-CN-Cu bridges. Compound 4 contains a 1D zigzag chain array made of cubane-like [(eta5-C5Me5)WS3Cu3(mu3-Cl)(mu-CN)(CN)]- anions linked by a couple of Cu-mu-CN-Cu bridges. Compound 5 contains a dimeric structure in which the two incomplete cubane-like [(eta5-C5Me5)WS3(CuCN)2(mu-CN)]- anions are strongly held together via a pair of Cu-mu-CN-Cu bridges. Compound 6 contains a 2D brick-wall layer structure in which dimers of [(eta5-C5Me5)WS3Cu3Br(4,4'-bipy)]2 are interconnected via four Cu-mu-Br-Cu bridges. The successful construction of (eta5-C5Me5)WS3Cu3-based supramolecular compounds 2-6 from the geometry-fixed clusters 1a and 1b may expand the scope of the rational design and construction of cluster-based supramolecular assemblies.     

Synthesis of an unprecedented bicapped adamantoid [Cu6(mu2-I)(mu3-I)4(mu4-I)(m-tolyl3P)4(CH3CN)2] cluster

The reaction of copper(I) iodide with tri-m-tolylphosphine (m-tolyl(3)P) in acetonitrile yielded the cluster [Cu(6)(mu2-I)(mu3-I)4(mu4-I)(m-tolyl(3)P)4(CH(3)CN)2] (1), with a bicapped adamantoid geometry. In this compound, four Cu atoms are coordinated to four terminally bonded m-tolyl(3)P ligands, two Cu atoms are bonded to two CH(3)CN ligands, and iodide ligands have mu2-I, mu3-I, and mu4-I bonding modes. This compound has four CuI(3)P and two CuI(3)N cores, and geometry around each Cu center is distorted tetrahedral.The polarizable iodide ligand and the position of the methyl group in the phenyl ring attached to the P atom appear to have played the pivotal role in the formation of monomeric bicapped adamantoid geometry, which is unique in copper chemistry.     

Unsupported gold(I)-copper(I) interactions through eta1 Au-[Au(C6F5)2]- coordination to Cu+ Lewis acid sites

The reaction of the complex [Au2Ag2(C6F5)4)N[triple bond]CCH3)2]n (1) with 1 equiv of CuCl in the presence of 1 equiv of pyrimidine ligand leads to the formation of the heteronuclear Au(I)-Cu(I) organometallic polymer [Cu{Au(C6F5)2}(N[triple bond]CCH3)(mu2-C4H4N2)]n (2) through a transmetalation reaction. Complex 2 displays unprecedented unsupported Au(I)...Cu(I) interactions of [Au(C6F5)2]- units with the acid Cu(I) sites in a [Cu(N[triple bond]CCH3)(mu2-pyrimidine)]n+(n) polymeric chain. Complex 2 has a rich photophysics in solution and in the solid state.     

A molecular pinwheel multicopper(I) cluster, [(L(S-))6Cu(I)13(S2-)2]3+ with mu4-sulfido, mu3-thiolato and nitrogen ligands

A copper(I) complex with new N2S thiol ligand transforms to a multicopper(I) cluster, [(L(S-))6Cu(I)13(S2-)2]3+ (1); its X-ray structure exhibiting mu4-sulfido and mu3-thiolato coordination is presented and compared to other cuprous thiolato/sulfido clusters including that observed in the copper enzyme nitrous oxide reductase.     

Reactions of a tungsten trisulfido complex of hydridotris(3,5-dimethylpyrazol-1-yl)borate (Tp*) [Et(4)N][Tp*WS(3)] with CuX (X = Cl, NCS, or CN): isolation, structures, and third-order NLO properties

Reactions of a tungsten trisulfido complex of hydridotris(3,5-dimethylpyrazol-1-yl)borate (Tp*) [Et4N][Tp*WS3] (1) with 3 equiv of CuCl in CHCl3 afforded a tetranuclear anionic cluster [Et4N][Tp*W(mu3-S)3(CuCl)3] (2), while that of 1 with 3 equiv of CuNCS in MeCN produced a decanuclear neutral cluster (major product) [Tp*W(mu3-S)3Cu3(mu-NCS)3(CuMeCN)]2 (3) along with a binuclear anionic cluster (minor product) [Et4N][Tp*WO(mu-S)2(CuNCS)] (4). Solvothermal reactions of 1 with 3 equiv of CuCN in MeCN at 80 degrees C for 48 h followed by slowly cooling it to ambient temperature gave rise to a polymeric cluster [Tp*W(mu3-S)(mu-S)2Cu2(MeCN)(mu-CN)]n (5). Compounds 2-5 were characterized by elemental analysis, IR, UV-vis, 1H NMR, and single-crystal X-ray crystallography. The cluster anion of 2 has a [Tp*WS3Cu3] incomplete cube with one Cl atom coordinated at each Cu center. 3 is composed of an unprecedented centrosymmetric W2Cu8 cluster core in which each void of the two single incomplete cubane-like [Tp*W(mu3-S)3Cu3(mu-NCS)]+ cations is partially filled with an extra [Cu(MeCN)(mu-NCS)2]- anion via a pair of Cu-mu-NCS-Cu bridges. The cluster anion of 4 contains one WS2Cu core that is formed by an oxidized [Tp*WO(mu-S)2] species and one CuNCS fragment. 5 consists of butterfly shaped [Tp*W(mu3-S)(mu-S)2Cu2(MeCN)] fragments that are interconnected via cyanide bridges to form a 1D spiral chain extending along the c axis. The successful synthesis of 2-5 from 1 suggests that 1 may be an excellent synthon to the W/Cu/S clusters. In addition, the third-order nonlinear optical (NLO) properties of 1-3 in solution were also investigated by femtosecond degenerate four-wave mixing (DFWM) technique with a 80 fs pulse width at 800 nm. Although 2 was not detected to have NLO effects, 1 and 3 exhibited relatively good optical nonlinearities with the nonlinear refractive index n2 and the third-order nonlinear optical susceptibility chi(3) values being 0.79 x 10(-13) and 0.38 x 10(-14) esu (1) and 2.08 x 10(-13) and 1.00 x 10(-14) esu (3), respectively. The second-order hyperpolarizability gamma value for 3 (5.46 x 10(-32) esu) is ca. 5 times larger than that of its precursor 1.     

Crystal-to-crystal transformations in heterometallic yttrium(III)-copper(I) iodide derivatives in a confined solvent-free environment: influence of solvated yttrium cations on the nuclearity and dimensionality of iodocuprate clusters

The solvated yttrium iodide precursors [Y(L)(8)]I(3) (L = DMSO or DMF), prepared in situ by stirring YI(3)(Pr(i)OH)(4) in DMSO or DMF, react with CuI in the presence of NH(4)I to give ionic hetero-metallic species [Y(DMSO)(8)][Cu(2)(mu-I)I(4)] (1) and [Y(DMF)(8)][Cu(4)(mu(3)-I)(2)(mu-I)(3)I(2)] (2) in excellent yields. Re-crystallization of 1 from DMF afforded the mixed-solvate complex [Y(DMSO)(6)(DMF)(2)][CuI(3)][I] (3). Compounds 2 and 3 undergo unique crystal-to-crystal transformation via progressive substitution of DMF by water molecules in a confined, solvent-free environment. Thus, crystals of 3 transform into [Y(DMSO)(6)(H(2)O)(2)][CuI(3)][I] (4), whereas a discrete ion-pair assembly of 2 is first converted into a 1-D zig-zag structure [Y(DMF)(6)(H(2)O)(2)](3+)[Cu(7)(mu(4)-I)(3)(mu(3)-I)(2)(mu-I)(4)(I)](1infinity)(3-) (5) and finally into a 2-D sheet containing mixed-valent copper atoms, [Y(DMF)(6)(H(2)O)(3)](3+)[Cu(I)(7)Cu(II)(2)(mu(3)-I)(8)(mu-I)(6)](2infinity)(3-) (6). The bi- and tetrafurcate H-bonding between water ligands on yttrium and iodides of the Cu-I cluster plays a pivotal role in the evolution of structures 4-6. Formation of a wide range of iodocuprate structures in 1-6, from discrete mono-, di- or tetranuclear units to one- and two-dimensional extended arrays, reflects the influence of solvated yttrium cations on the nuclearity and dimensionality of Cu-I clusters. TG-DTA-MS studies and DFT calculations for these complexes have also been carried out in order to determine their thermal stability and have insight about aforesaid transformations.     

Solid state synthesis of copper(I) thiotungstate cluster compounds at low heating temperatures. Crystal structures of [(n-Bu)4N]3-[WS4Cu3Cl3Br] and [Et4N]4[WS4Cu4I6]

Summary Reaction of [NH₄]₂[WS₄] with CuX (X = Cl or I) and R₄NX (R = Et or n-Bu) in the solid state gave two new bimetallic compounds with W:Cu compositions from 1:3 to 1:4. Compound (1), [(n-Bu)₄N]₃[WS₄Cu₃Cl₃Br], crystallizes in the hexagonal space group R3c with a = 17.051(5), c = 38.372(5) Å, V = 9661.8 ų, Z = 6. The cluster anion of (1) comprises a cubane-like cluster core [WS₃Cu₃Br] of C₃ symmetry with a Cl atom attached to each of the three Cu atoms and one terminal sulphido ligand attached to the W atom. Compound (2), [Et₄N]₄[WS₄Cu₄I₆], crystallizes in the monoclinic space group C2/m with a = 29.702(6), b = 12.7887(5), c = 15.327(3)Å, = 99.69(2), V = 5738.1 ų, Z = 4. In the cluster anion of (2), four edges of the WS₄ core are coordinated by four Cu atoms, giving a WS₄Cu₄ aggregate of approximate C_2V symmetry.     

Reactivity of the heterometallic clusters [HMCo3(CO)12] and [Et4N][MCo3(CO)12] (M = Fe, Ru) toward phosphine selenides, including selenium transfer. Crystal structures of [HRuCo3(CO)7(mu-CO)3(mu-dppy)], [MCo2(mu3-Se)(CO)7(mu-dppy)], and [RuCo2(mu3-Se)(CO)7(mu-dppm)] [dppy = Ph2(2-C5H4N)P, dppm = Ph2PCH2PPh2

The reactivity of [HMCo3(CO)12] and [Et4N][MCo3(CO)12] (M = Fe, Ru) toward phosphine selenides such as Ph3PSe, Ph2P(Se)CH2PPh2, Ph2(2-C5H4N)PSe, Ph2(2-C4H3S)PSe, and Ph2[(2-C5H4N)(2-C4H2S)]PSe has been studied with the aim to obtain new selenido-carbonyl bimetallic clusters. The reactions of the hydrido clusters give two main classes of products: (i) triangular clusters with a mu3-Se capping ligand of the type [MCo2(mu3-Se)(CO)(9-x)L(y)] resulting from the selenium transfer (x = y = 1, 2, with L = monodentate ligand; x = 2, 4, and y = 1, 2, with L = bidentate ligand) (M = Fe, Ru) and (ii) tetranuclear clusters of the type [HMCo3(CO)12xL(y)] obtained by simple substitution of axial, Co-bound carbonyl groups by the deselenized phosphine ligand. The crystal structures of [HRuCo3(CO)7(mu-CO)3(mu-dppy)] (1), [MCo2(mu3-Se)(CO)7(mu-dppy)] (M = Fe (16) or Ru (2)), and [RuCo2(mu3-Se)(CO)7(mu-dppm)] (12) are reported [dppy = Ph2(2-C5H4N)P, dppm = Ph2PCH2PPh2]. Clusters 2, 12, and 16 are the first examples of trinuclear bimetallic selenido clusters substituted by phosphines. Their core consists of metal triangles capped by a mu3-selenium atom with the bidentate ligand bridging two metals in equatorial positions. The core of cluster 1 consists of a RuCo3 tetrahedron, each Co-Co bond being bridged by a carbonyl group and one further bridged by a dppy ligand. The coordination of dppy in a pseudoaxial position causes the migration of the hydride ligand to the Ru(mu-H)Co edge. In contrast to the reactions of the hydrido clusters, those with the anionic clusters [MCo3(CO)12]- do not lead to Se transfer from phosphorus to the cluster but only to CO substitution by the deselenized phosphine.     

Heterometallic polymeric clusters containing tetraselenotungstate anion: one-dimensional helical chain [[La(Me2SO)8

[PPh4]2[WSe4] reacts with an equivalent of [Ag(MeCN)4][ClO4] in DMF to afford a linear polymeric cluster [[Ph4P][(mu-WSe4)Ag]]n (1). Treatment of cluster 1 with excess La(NO3)3.3H2O in Me2SO solution resulted in the formation of a helical chain polymeric cluster [[La(Me2SO)8][(mu-WSe4)3Ag3]]n (2). Cluster 2 crystallizes in the monoclinic space group P2(1/n) with four formula units in a cell of dimensions a = 12.7642(5) A, b = 24.1725(9) A, c = 19.4012(7) A, and beta = 103.546(11) degrees. Refinement by full-matrix least-squares techniques gave final residuals R = 0.0540 and Rw = 0.1116 for 494 variables and 7593 reflections (Fo(2) > 2.0sigma(Fo(2))). The anion [[(mu-WSe4)3Ag3]]n(3n-) in 2 can be described as a butterfly-type SeWSe3Ag2 basic repeating unit linked through interactions with a Ag atom of one fragment and a Ag atom of another to form an intriguing helical array. The CuCN, KCN, and [Et4N]2[WSe4] reaction system resulted in the formation of a novel three-dimensional cluster [[Et4N]2[(mu4-WSe4)Cu4(CN)4]]n (4) either in DMF/2-picoline or in solid at 80 degrees C. Cluster 4 crystallizes in the orthorhombic space group Fddd with cell constants a = 11.090(2) A, b = 23.206(5) A, c = 23.910(5) A, and Z = 8. Anisotropic refinement with 1510 reflections (Fo(2) > 2.0sigma(Fo(2))) and 82 parameters for all non-hydrogen atoms yielded the values of R = 0.0428 and Rw = 0.0887. The anion structure of 4 is built up from a WSe4Cu4 unit bridged by cyanide ligands to form a three-dimensional cross framework. The air- and moisture-stable polymeric clusters easily decompose into small molecular clusters when treated with ligands such as PPh3 and pyridine (Py). Cluster 2 exhibits both strong optical absorption and an optical self-focusing effect (effective alpha2 = 2.2 x 10(-9) m2.W(-1), n2 = 6.8 x 10(-15) m2.W(-1); examined in a 0.13 mM DMF solution). Cluster 4 shows good photostability in the process of measurement and a large optical limiting effect (the limiting threshold is ca. 0.2 J.cm(-2)).     

Initial members of the family of molecular mid-valent high-nuclearity iron nitrides: [Fe4N2X10]4- and [Fe10N8X12]5- (X = Cl-, Br-)

Current theoretical and experimental evidence points toward X = N as the identity of the interstitial atom in the [MoFe7S9X] core of the iron-molybdenum cofactor cluster of nitrogenase. This atom functions with mu6 bridging multiplicity to six iron atoms and, if it is nitrogen as nitride, raises a question as to the existence of a family of molecular iron nitrides of higher nuclearity than known dinuclear Fe(III,IV) species with linear [Fe-N-Fe]5+,4+ bridges. This matter has been initially examined by variation of reactant stoichiometry in the self-assembly systems [FeX4]1-/(Me3Sn)3N (X = Cl-, Br-) in acetonitrile. A 2:1 mol ratio affords [Fe4N2Cl10]4- (1), isolated as the Et4N+ salt (72%). This cluster has idealized C2h symmetry with a planar antiferromagnetically coupled [Fe(III)4(mu3-N)2]6+ core containing an Fe2N2 rhombus to which are attached two FeCl3 units. DFT calculations have been performed to determine the dominant magnetic exchange pathway. An 11:8 mol ratio leads to [Fe10N8Cl12]5- (3) as the Et4N+ salt (37%). The cluster possesses idealized D2h symmetry and is built of 15 edge- and vertex-shared rhomboids involving two mu3-N and six mu4-N bridging atoms, and incorporates two of the core units of 1. Four FeN2Cl2 and four FeN3Cl sites are tetrahedral and two FeN5 sites are trigonal pyramidal. The cluster is mixed-valence (9Fe(III) + Fe(IV)); a discrete Fe(IV) site was not detected by crystallography or M?ssbauer spectroscopy. The corresponding clusters [Fe4N2Br10]4- and [Fe10N8Br12]5- are isostructural with 1 and 3, respectively. Future research is directed toward defining the scope of the family of molecular iron nitrides.     

Synthesis and crystal structure of chain [Cu_2I_2(PPh_3)_2(C_4H_5N_3)]∝

The chain [ Cu2I2(PPh3)2(C4H5N3)] has been synthesized and characterized by X-ray crystallography.It crystallizes in the triclinic system,space group P 1,with a=0.9985(2)nm,b=1.0998(2)nm,c=1.5174(2)nm,a=87.89(1),P=76.73(l),7=77.77(1),V=1.5849(5)nm3,Z=2,Bc=2.095g/cm3 [Gu2I2(PPh3)2(Crh5N3)] has a dimmer unit [Cu2I2(PPh3)2(C4H5N3)].The two N atoms of the phenyl ring of 2-aminopyrimidine bridge two [CuI(PPh3)]2 units,by which a one-dimensional chain is constructed.The van der Waals force makes the molecules arrange in the three-dimensional space.     

STRUCTURE STUDIES OF [Et_4N]_4[Cu_8(i-mnt)_6] (i-mnt=S_2C=C(CN)_2) AND [Me_4N]_4[Cu_5Ag_3(i-mnt)_6]·H_2O

<正> [Me4N]6[Ag6(i-mnt)6].H2O(1),[Et4N]4[Cu8(i-mnt)6](2) and [Me4N]4-[Cu5Ag3(i-mnt)6].H2O(3)(i-mnt=S2C=C(CN)2) were synthesized. The crystal and molecular structure of the complex 1 was reported by us.The structure of the complex 2 was determined from single crystal X-ray diffraction data. [Et4N]4[Cu8(i-mnt)s] 2, Mr=1870.46, monoclinic, P21/n, a=14.724(6), b = 17.228(3), c=15.59(1)A,β= 100.75(7)°,V=3886.3A3;Z = 2,Dc= 1.598 g/cm3. Complex 3 has been characterized by ICP elemental analyses and IR spectrum.     

High-nuclearity sulfide-rich molybdenum[bond]iron[bond]sulfur clusters: reevaluation and extension

High-nuclearity Mo[bond]Fe[bond]S clusters are of interest as potential synthetic precursors to the MoFe(7)S(9) cofactor cluster of nitrogenase. In this context, the synthesis and properties of previously reported but sparsely described trinuclear [(edt)(2)M(2)FeS(6)](3-) (M = Mo (2), W (3)) and hexanuclear [(edt)(2)Mo(2)Fe(4)S(9)](4-) (4, edt = ethane-1,2-dithiolate; Zhang, Z.; et al. Kexue Tongbao 1987, 32, 1405) have been reexamined and extended. More accurate structures of 2-4 that confirm earlier findings have been determined. Detailed preparations (not previously available) are given for 2 and 3, whose structures exhibit the C(2) arrangement [[(edt)M(S)(mu(2)-S)(2)](2)Fe(III)](3-) with square pyramidal Mo(V) and tetrahedral Fe(III). Oxidation states follow from (57)Fe M?ssbauer parameters and an S = (3)/(2) ground state from the EPR spectrum. The assembly system 2/3FeCl(3)/3Li(2)S/nNaSEt in methanol/acetonitrile (n = 4) affords (R(4)N)(4)[4] (R = Et, Bu; 70-80%). The structure of 4 contains the [Mo(2)Fe(4)(mu(2)-S)(6)(mu(3)-S)(2)(mu(4)-S)](0) core, with the same bridging pattern as the [Fe(6)S(9)](2-) core of [Fe(6)S(9)(SR)(2)](4-) (1), in overall C(2v) symmetry. Cluster 4 supports a reversible three-member electron transfer series 4-/3-/2- with E(1/2) = -0.76 and -0.30 V in Me(2)SO. Oxidation of (Et(4)N)(4)[4] in DMF with 1 equiv of tropylium ion gives [(edt)(2)Mo(2)Fe(4)S(9)](3-) (5) isolated as (Et(4)N)(3)[5].2DMF (75%). Alternatively, the assembly system (n = 3) gives the oxidized cluster directly as (Bu(4)N)(3)[5] (53%). Treatment of 5 with 1 equiv of [Cp(2)Fe](1+) in DMF did not result in one-electron oxidation but instead produced heptanuclear [(edt)(2)Mo(2)Fe(5)S(11)](3-) (6), isolated as the Bu(4)N(+)salt (38%). Cluster 6 features the previously unknown core Mo(2)Fe(5)(mu(2)-S)(7)(mu(3)-S)(4) in molecular C(2) symmetry. In 4-6, the (edt)MoS(3) sites are distorted trigonal bipramidal and the FeS(4) sites are distorted tetrahedral with all sulfide ligands bridging. M?ssbauer spectroscopic data for 2 and 4-6 are reported; (mean) iron oxidation states increase in the order 4 < 5 approximately 1 < 6 approximately 2. Redox and spectroscopic data attributed earlier to clusters 2 and 4 are largely in disagreement with those determined in this work. The only iron and molybdenum[bond]iron clusters with the same sulfide content as the iron[bond]molybdenum cofactor of nitrogenase are [Fe(6)S(9)(SR)(2)](4-) and [(edt)(2)Mo(2)Fe(4)S(9)](3-)(,4-).