Construction of [(eta5-C5Me5)MoS3Cu3]-based supramolecular assemblies from the [(eta5-C5Me5)MoS3(CuNCS)3]- cluster anion and multitopic ligands with different symmetries

The assembly of a new family of [(eta5-C5Me5)MoS3Cu3]-supported supramolecular compounds from a preformed cluster [PPh4][(eta5-C5Me5)MoS3(CuNCS)3].DMF (1.DMF) with four multitopic ligands with different symmetries is described. Reactions of 1 with 1,2-bis(4-pyridyl)ethane (bpe) (Cs symmetry) or 1,4-pyrazine (1,4-pyz) (D2h symmetry) in aniline gave rise to two polymeric clusters {[{(eta5-C5Me5)MoS3Cu3}2(NCS)3(mu-NCS)(bpe)3].3aniline}n (2) and [(eta5-C5Me5)MoS3Cu3(1,4-pyz)(mu-NCS)2]n (3). On the other hand, solid-state reactions of 1 with 2,4,6-tri(4-pyridyl)-1,3,5-triazine (tpt) (D3h symmetry) or 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphyrin (H2tpyp) (D4h symmetry if 21H and 23H of the H2tpyp are omitted) at 100 degrees C for 12 h followed by extraction with aniline yielded another two polymeric clusters {[(eta5-C5Me5)MoS3Cu3(tpt)(aniline)(NCS)2].0.75aniline. 0.5H2O}n (4) and {[(eta5-C5Me5)MoS3Cu3(NCS)(mu-NCS)(H2tpyp)0.4(Cu-tpyp)0.1].2aniline.2.5benzene}n (5). These compounds were characterized by elemental analysis, IR spectra, UV-vis spectra, 1H NMR, and X-ray analysis. Compound 2 consists of a 2D (6,3) network in which [(eta5-C5Me5)MoS3Cu3] cores serve both a T-shaped three-connecting node and an angular two-connecting node to interconnect other equivalent units through single bpe bridges, double bpe bridges, and mu-NCS bridges. Compound 3 has a 3D diamondlike framework in which each [(eta5-C5Me5)MoS3Cu3] core, acting as a tetrahedral connecting node, links four other neighboring units by 1,4-pyz bridges and mu-NCS bridges. Compound 4 contains a honeycomb 2D (6,3)core(6,3)tpt network in which each cluster core, serving a trigonal-planar three-connecting node, links three pairs of equivalent cluster cores via three tpt lignads. Compound 5 has a rare scalelike 2D (4,62)core(42,62)ligand network in which each cluster core acts as a T-shaped three-connecting node to link with other equivalent ones through mu-NCS bridges and H2tpyp (or Cu-tpyp) ligands. The results showed that the formation of the four different multidimensional topological structures was evidently affected by the symmetry of the ligands used. In addition, the third-order nonlinear optical properties of 1-5 in aniline were also investigated by using Z-scan techniques at 532 nm.     

Assembly of [(eta5-C5Me5)MoS3Cu3]-supported one-dimensional chains with single, double, triple, and quadruple strands

The construction of a new set of [(eta5-C5Me5)MoS3Cu3]-based supramolecular compounds with different one-dimensional (1D) arrays from two preformed clusters [PPh4][(eta5-C5Me5)MoS3(CuX)3] (X = Br (1a), NCS (1b)) with 1,2-bis(4-pyridyl)ethane (bpe) and 1,3-bis(4-pyridyl)propane (bpp) is presented. Reactions of 1a with bpe in different molar ratios afforded ([((eta5-C5Me5)MoS3Cu3) 2(mu-bpe)3.5Br4].MeCN) n (2), ([((eta5-C5Me5)MoS3Cu3)2(mu-bpe)3Br4].Sol)n (3a: Sol = DMSO.3MeCN; 3b: Sol = 2aniline.3MeCN), ([((eta5-C 5Me5)MoS3Cu3)2(mu-bpe)3(bpe)Br4].0.35DMF)n (4), and ([((eta5-C5Me5)MoS3Cu3)2(mu-bpe)2(mu-Br)(mu3-Br)Br2].DMF.MeCN)n (5). On the other hand, treatment of 1a or 1b with bpp produced [(eta5-C5Me5)MoS3Cu3(mu-bpp)(mu-Br)Br]n (6) and ([((eta5-C5Me5)MoS3Cu3)2(mu-bpp)3(mu-NCS)2(NCS)](NCS))n (7). Compounds 2-7 have been characterized by elemental analysis, UV-vis spectroscopy, IR spectroscopy, 1H NMR, and X-ray analysis. In 2, each [(eta5-C5Me5)MoS3Cu3] core serves as an angular two-connecting node to link other equivalent cores by single and double bpe bridges to form a 1D "Great Wall"-like chain. In 3a and 3b, the [(eta5-C5Me5)MoS3Cu3] cores are linked alternatively by single and double bpe bridges to give a 1D zigzag chain. In 4, six cluster cores (two as a two-connecting node and four as a three-connecting node) are connected by four single bpe and two double bpe bridges to form a cyclohexane-shaped repeating unit, which is further fused with other units to generate a 1D double-stranded chain. Compound 5 has a simple 1D zigzag chain consisting of the cluster cores linked by single bpe bridges. In 6, the cluster cores are linked by single bpp bridges to give a 1D helical chain, which further holds two symmetry-related chains through C-H...Br hydrogen-bonding interactions, thereby forming a 1D H-bonded triple-stranded chain. Compound 7 has a rare 1D quadruple chain, in which the [(eta5-C5Me5)MoS3Cu3] cores work as planar four- and five-connecting nodes to interconnect other equivalent cores through single bpp bridges and single and double thiocyanate bridges. In addition, the third-order nonlinear optical properties of 1a, 2, 3a, and 4-7 in aniline were also investigated by using the Z-scan technique with a 4.5 ns pulse laser at 532 nm.     

Alkylation reactions of [WS(4)](2)(-) and [(eta(5)-C(5)Me(5))WS(3)](-) with 2,6-bis(bromomethyl)pyridine: the first isolation of bisalkylated tetrathiometalate WS(2)[2,6-(SCH(2))(2)(C(5)H(3)N)

The trithio and tetrathio complexes of tungsten (PPh(4))[CpWS(3)] (Cp = eta(5)-C(5)Me(5)) and (PPh(4))(2)[WS(4)] undergo alkylation reactions with 2,6-bis(bromomethyl)pyridine to yield [(CpWS(2))(2)[2,6-(SCH(2))(2)(C(5)H(3)N)]].CH(3)CN (1.CH3CN) (73.1% yield) and WS(2)[2,6-(SCH(2))(2)(C(5)H(3)N)] (2) (76.0% yield), respectively. In the dinuclear complex 1, two CpWS(3) units are linked by a 2,6-dimethylenepyridine bridge, and the pyridine nitrogen is not coordinated at tungsten. Complex 2 is the first example of bisalkylated tetrathiometalates, the mononuclear structure of which is stabilized by coordination of the pyridine nitrogen.     

Bi- and poly-metallic cyanide-bridged complexes of the redox-active cyanomanganese nitrosyl unit [Mn(CN)(PR3)(NO)(eta-C5H4Me)

Cationic nitrile complexes and neutral halide and cyanide complexes, with the general formula [MnL1L2(NO)(eta-C5H4Me)]z, undergo one-electron oxidation at a Pt electrode in CH2Cl2. Linear plots of oxidation potential, Eo', vs. nu(NO) or the Lever parameters, EL, for L1 and L2, allow Eo' to be estimated for unknown analogues. In the presence of TlPF6, [MnIL'(NO)(eta-C5H4Me)] reacts with [Mn(CN)L(NO)(eta-C5H4Me)] to give [(eta5-C5H4Me)(ON)LMn(mu-CN)MnL'(NO)(eta5-C5H4Me)][PF6] which undergoes two reversible one-electron oxidations; DeltaE, the difference between the potentials for the two processes, differs significantly for stable cyanide-bridged linkage isomers. Novel pentametallic complexes such as [Mn[(mu-NC)Mn(CNBut)(NO)(eta5-C5H4Me)]4(OEt2)][PF6]2 and [Mn[(mu-NC)Mn(CNXyl)(NO)(eta5-C5H4Me)]4(NO3-O,O')][PF6], containing a trigonal bipyramidal and a distorted octahedral Mn(II) centre, respectively, result either from slow decomposition of the binuclear cyanide-bridged species or from the reaction of anhydrous MnI2 with four equivalents of [Mn(CN)L(NO)(eta5-C5H4Me)] in the presence of TlPF6.     

Synthesis and Structural Characterization of [Cu(DMF)_6][(η~5-C_5Me_5)WS_3(CuBr)_3]_2·Et_2O

1 INTRODUCTION In the last decade, we have been interested in the synthesis of [PPh4][(h5-C5Me5)MS3] (M = Mo, W)[1, 2] , Whose organometallic trisulfido anions show high reactivity towards various transition metals[3~6] . We once reported that the reaction of [PPh4][(h5-C5Me5)WS3] with CuBr in CH3CN afforded a double incomplete-cubane cluster [PPh4]2[(h5-C5Me5)WS3(CuBr)3]2[3], while the analogous reaction of [PPh4][(h5-C5Me5)WS3] with CuBr in CHCl3 gave rise to a 揻our-…     

Novel coordinatively unsaturated bimetallic complexes, [(eta5-C5Me5)Ru(mu2-iPrNC(Me)=N(i)Pr)Ru(eta5-C5Me5)]+: a bridging amidinate ligand perpendicular to the metal-metal axis effectively stabilizes the highly reactive cationic diruthenium species.

Coordinatively unsaturated diruthenium complexes, [(eta5-C5Me5)Ru(mu2-iPrNC(Me)=NiPr)Ru(eta5-C5Me5)]+, of which crystallography revealed structures bearing a bridging amidinate ligand perpendicular to the Ru-Ru axis, were synthesized by anion exchange of [(eta5-C3Me5(Ru(mu2-iPrNC(Me)=NiPr)Ru(eta5-C5Me5)]+ Br- by weakly coordinating anions. Variable-temperature NMR showed rapid motion of the bridging amidinate ligand. The coordinatively unsaturated nature of the cationic complexes provides their high reactivity toward a series of two electron donor ligands. Oxidative addition of molecular hydrogen occurred to give [(eta5-C5Me5)Ru(mu2-iPrNC(Me)=NiPr)(mu-H)Ru(eta5-C5Me5)(H)]+, which was isolated and characterized.     

Acetic acid induced self-assembly of supramolecular compounds [Et4N]3[(WS4Cu2)2(mu-CN)3].2MeCN and [PPh4][WS4Cu3(mu-CN)2].MeCN from preformed clusters [A]2[WS4(CuCN)2] (A = Et4N, PPh4)

Reactions of two preformed trinuclear W/Cu/S clusters, [A](2)[WS(4)(CuCN)(2)] (1: A = Et(4)N; 2: A = PPh(4)), with different concentrations of acetic acid in MeCN generate two interesting 2D polymeric clusters [Et(4)N](3)[(WS(4)Cu(2))(2)(mu-CN)(3)].2MeCN (3), and [PPh(4)][WS(4)Cu(3)(mu-CN)(2)].MeCN (4), respectively. Compound 4 can also be readily obtained in a high yield from the reaction of 2 with equimolar [Cu(MeCN)(4)]PF(6) in MeCN. These compounds have been characterized by elemental analysis, IR spectra, thermal analysis, and single-crystal X-ray diffraction. An X-ray analysis reveals that compound 3 retains the WS(4)Cu(2) cluster core, which serves as a 3-connecting node to link equivalent nodes via single cyanide bridges, forming an anionic 2D (6,3) net. Compound 4 consists of a T-shaped WS(4)Cu(3) core, which also acts as a 3-connecting node, with links to 3 equivalent clusters either through single or double cyanide bridges, affording a different anionic 2D (6,3) network. The acetic acid induced aggregation of 3 and 4 from the two cluster precursors 1 and 2 suggests that this simple synthetic strategy is likely to be applicable to many related systems.     

Electron paramagnetic resonance and spectroscopic characteristics of electrogenerated mixed-valent systems [(eta 5-C5Me5)M(mu-L)M(eta 5-C5Me5)]+ (M = Rh, Ir; L = 2,5-diiminopyrazines) in relation to the radicals [(eta 5-C5Me5)ClM(mu-L)MCl(eta 5-C5Me5)]+ and [(eta 5-C5Me5)M(mu-L)MCl(eta 5-C5Me5)]2+

Electrochemical reduction of the dinuclear [(eta 5-C5Me5)ClM(mu-L)MCl(eta 5-C5Me5)]2+ ions (M = Rh, Ir; L = 2,5-bis(1-phenyliminoethyl)pyrazine (bpip) and 2,5-bis[1-(2,6-dimethylphenyl)iminoethyl]pyrazine (bxip)) proceeds via the paramagnetic intermediates [(eta 5-C5Me5)ClM(mu-L)MCl(eta 5-C5Me5)]+ (L = bpip) or [(eta 5-C5Me5)M(mu-L)MCl(eta 5-C5Me5)]2+ (L = bxip) and [(eta 5-C5Me5)M(mu-L)M(eta 5-C5Me5)]+. Whereas the first is clearly a radical species with a small g anisotropy, the chloride-free cations are distinguished by structured intervalence charge transfer (IVCT) bands in the near-infrared region and by rhombic electron paramagnetic resonance features between g = 1.9 and g = 2.3, which suggests considerable metal participation at the singly occupied MO. Alternatives for the d configuration assignment and for the role of the bisbidentate-conjugated bridging ligands will be discussed. The main difference between bpip and bxip systems is the destabilization of the chloride-containing forms through the bxip ligand for reasons of steric interference.     

Reductive reactivity of the organolanthanide hydrides, [(C5Me5)2LnH]x, leads to ansa-allyl cyclopentadienyl (eta(5)-C5Me4CH2-C5Me4CH2-eta(3))2- and trianionic cyclooctatetraenyl (C8H7)3- ligands

The reductive reactivity of lanthanide hydride ligands in the [(C5Me5)2LnH]x complexes (Ln = Sm, La, Y) was examined to see if these hydride ligands would react like the actinide hydrides in [(C5Me5)2AnH2]2 (An = U, Th) and [(C5Me5)2UH]2. Each lanthanide hydride complex reduces PhSSPh to make [(C5Me5)2Ln(mu-SPh)]2 in approximately 90% yield. [(C5Me5)2SmH]2 reduces phenazine and anthracene to make [(C5Me5)2Sm]2(mu-eta(3):eta(3)-C12H8N2) and [(C5Me5)2Sm]2(mu-eta(3):eta(3)-C10H14), respectively, but the analogous [(C5Me5)2LaH]x and [(C5Me5)2YH]2 reactions are more complicated. All three lanthanide hydrides reduce C8H8 to make (C5Me5)Ln(C8H8) and (C5Me5)3Ln, a reaction that constitutes another synthetic route to (C5Me5)3Ln complexes. In the reaction of [(C5Me5)2YH]2 with C8H8, two unusual byproducts are obtained. In benzene, a (C5Me5)Y[(eta(5)-C5Me4CH2-C5Me4CH2-eta(3))] complex forms in which two (C5Me5)(1-) rings are linked to make a new type of ansa-allyl-cyclopentadienyl dianion that binds as a pentahapto-trihapto chelate. In cyclohexane, a (C5Me5)2Y(mu-eta(8):eta(1)-C8H7)Y(C5Me5) complex forms in which a (C8H8)(2-) ring is metalated to form a bridging (C8H7)(3-) trianion.     

Dinitrogen functionalization with terminal alkynes, amines, and hydrazines promoted by [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2): observation of side-on and end-on diazenido complexes in the reduction of N2 to hydrazine

Functionalization of the N2 ligand in the side-on bound dinitrogen complex, [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2), has been accomplished by addition of terminal alkynes to furnish acetylide zirconocene diazenido complexes, [(eta5-C5Me4H)2Zr(C[triple bond]CR)]2(mu2,eta2,eta2-N2H2) (R = nBu, tBu, Ph). Characterization of [(eta5-C5Me4H)2Zr(C[triple bond]CCMe3)]2(mu2,eta2,eta2-N2H2) by X-ray diffraction revealed a side-on bound diazenido ligand in the solid state, while variable-temperature 1H and 15N NMR studies established rapid interconversion between eta1,eta1 and eta2,eta2 hapticity of the [N2H2]2- ligand in solution. Synthesis of alkyl, halide, and triflato zirconocene diazenido complexes, [(eta5-C5Me4H)2ZrX]2(mu2,eta1,eta1-N2H2) (X = Cl, I, OTf, CH2Ph, CH2SiMe3), afforded eta1,eta1 coordination of the [N2H2]2- fragment both in the solid state and in solution, demonstrating that sterically demanding, in some cases pi-donating, ligands can overcome the electronically preferred side-on bonding mode. Unlike [(eta5-C5Me4H)2ZrH]2(mu2,eta2,eta2-N2H2), the acetylide and alkyl zirconocene diazenido complexes are thermally robust, resisting alpha-migration and N2 cleavage up to temperatures of 115 degrees C. Dinitrogen functionalization with [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2) was also accomplished by addition of proton donors. Weak Br?nsted acids such as water and ethanol yield hydrazine and (eta5-C5Me4H)2Zr(OH)2 and (eta5-C5Me4H)2Zr(OEt)2, respectively. Treatment of [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2) with HNMe2 or H2NNMe2 furnished amido or hydrazido zirconocene diazenido complexes that ultimately produce hydrazine upon protonation with ethanol. These results contrast previous observations with [(eta5-C5Me5)2Zr(eta1-N2)]2(mu2,eta1,eta1-N2) where loss of free dinitrogen is observed upon treatment with weak acids. These studies highlight the importance of cyclopentadienyl substituents on transformations involving coordinated dinitrogen.     

Synthesis and structural characterization of Be(eta 5-C5Me5)(eta 1-C5Me4H). Evidence for ring-inversion leading to Be(eta 5-C5Me4H)(eta 1-C5Me5)

The mixed-ring beryllocene Be(C5Me5)(C5Me4H), that contains eta 5-C5Me5 and eta 1-C5Me4H rings, the latter bonded to the metal through the CH carbon atom (X-ray crystal structure) reacts at room temperature with CNXyl (Xyl = C6H3-2,6-Me2) to give an iminoacyl product, Be(eta 5-C5Me4H)[C(NXyl)C5Me5] derived from the inverted beryllocene structure Be (eta 5-C5Me4H)(eta 1-C5Me5).     

Encapsulation of a trinuclear silver(I) cluster by two imido-nitrido metalloligands [{Ti(eta5-C5Me5)(micro-NH)}3(micro3-N)

Treatment of the metalloligand [{Ti(eta(5)-C(5)Me(5))(micro-NH)}(3)(micro(3)-N)] with silver(i) trifluoromethanesulfonate in different molar ratios gives the ionic compounds [Ag{(micro(3)-NH)(3)Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)}(2)][O(3)SCF(3)] and [Ag{(micro(3)-NH)(3)Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)}][O(3)SCF(3)] or the triangular silver cluster [(CF(3)SO(2)O)(3)Ag(3){(micro(3)-NH)(3)Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)}(2)] in which each face is capped by a metalloligand.     

Organometallic Fluorides of Zirconium and Hafnium in the Synthesis of Carboxylate Complexes: Molecular Structures of [{(eta(5)-C(5)Me(5))ZrF(OCOCF(3))(2)}(2)] and [(eta(5)-C(5)Me(5))(2)Zr(OCOCF(3))(2)

The reaction of [(eta(5)-C(5)Me(5))ZrF(3)] and [(eta(5)-C(5)Me(5))HfF(3)] with Me(3)SiOCOCF(3) yields the dinuclear complexes [{(eta(5)-C(5)Me(5))ZrF(OCOCF(3))(2)}(2)] (1) and [{(eta(5)-C(5)Me(5))HfF(OCOCF(3))(2)}(2)] (2), regardless of the molar ratio employed. [(eta(5)-C(5)Me(5))(2)ZrF(2)] reacts with 1 and 2 equiv of Me(3)SiOCOCF(3) to form the mononuclear compounds [(eta(5)-C(5)Me(5))(2)Zr(OCOCF(3))(2)] (3) and [(eta(5)-C(5)Me(5))(2)ZrF(OCOCF(3))] (4), respectively. The molecular structures of 1 and 3 have been determined by single-crystal X-ray analysis: 1, triclinic, P&onemacr;, a = 9.508(3) ?, b = 11.002(4) ?, c = 17.528(3) ?, alpha = 78.55(4), beta = 76.80(2), gamma = 87.51(2) degrees, V = 1750(1) ?(3), Z = 2, R = 0.0378; 3, monoclinic, C2/c, a = 18.553(4) ?, b = 9.110(2) ?, c = 16.323(3) ?, beta = 114.88(3) degrees, V = 2503(1) ?(3), Z = 4, R = 0.0457. Compound 1 shows bridging bidentate and chelating carboxylate ligands as well as bridging fluorine atoms. The zirconium atoms are seven coordinated and have an 18-electron configuration. X-ray studies of 3 reveal two structural components where the carboxylate ligands coordinate in a monodentate (major component) and a chelating manner (minor component).     

Mo(W)/Cu/S cluster-based supramolecular arrays assembled from preformed clusters [Et4N]4[WS4Cu4I6] and [(n-Bu)4N]2[MoOS3Cu3X3] (X = I, SCN) with flexible ditopic ligands

In our working toward the rational design and synthesis of cluster-based supramolecular architectures, a set of new [WS4Cu4]- or [MoOS3Cu3]-based supramolecular assemblies have been prepared from reactions of preformed cluster compounds [Et4N]4[WS4Cu4I6] (1) and [(n-Bu)4N]2[MoOS3Cu3X3] (2, X = I; 3, X = SCN) with flexible ditopic ligands such as dipyridylsulfide (dps), dipyridyl disulfide (dpds), and their combinations with dicyanamide (dca) anion and 4,4'-bipy. The cluster precursor 1 reacted with dps or dpds and sodium dicyanamide (dca) in MeCN to produce [WS4Cu4I2(dps)3].2MeCN (4.2MeCN) and [WS4Cu4(dca)2(dpds)2].Et2O.2MeCN (5.Et2O.2MeCN), respectively. On the other hand, treatment of 2 with dpds in DMF/MeCN afforded [MoOS3Cu3I(dpds)2].0.5DMF.2(MeCN)0.5 (6.0.5DMF.2(MeCN)0.5) while reaction of 3 with sodium dicyanamide (dca) and 4,4'-bipy in DMF/MeCN gave rise to [MoOS3Cu3(dca)(4,4'-bipy)1.5].DMF.MeCN (7.DMF.MeCN). Compounds 4.2MeCN, 5.Et2O.2MeCN, 6.0.5DMF.2(MeCN)0.5, and 7.DMF.MeCN have been characterized by elemental analysis, IR spectroscopy, and single-crystal X-ray crystallography. Compound 4 contains a 2D layer array made of the saddle-shaped [WS4Cu4] cores interlinked by three pairs of Cu-dps-Cu bridges. Compound 5 has another 2D layer structure in which the [WS4Cu4] cores are held together by four pairs of Cu-dca-Cu and Cu-dpds-Cu bridges. Compound 6 displays a 1D spiral chain structure built of the nido-like [MoOS3Cu3] cores via two pairs of Cu-dpds-Cu bridges. Compound 7 consists of a 2D staircase network in which each [MoOS3Cu3(4,4'-bipy]2 dimeric unit interconnects with four other equivalent units by a pair of 4,4'-bipy ligands and two pairs of dca anions. The [WS4Cu4] core in 4 or 5 and the [MoS3Cu3] core in 7 show a planar 4-connecting node and a seesaw-shaped 4-connecting node, respectively, which are unprecedented in cluster-based supramolecular compounds. The successful assembly of 4-7 from the three cluster precursors 1-3 through flexible ditopic ligands provides new routes to the rational design and construction of complicated cluster-based supramolecular arrays.     

Synthetic and theoretical study of the incorporation of metal halides in [{Ti(eta5-C5Me5)(mu-NH)}3(mu3-N)

The capacity of the imido-nitrido organometallic ligand [{Ti(eta5-C5Me5)(mu-NH)}3(mu3-N)] (1) to entrap main group metal halides MXn has been investigated. Treatment of 1 with metal halides in toluene or dichloromethane afforded several soluble adducts [MXn(L)] (L=1) in good yields. The reaction of 1 with one equivalent of Group 1 and 13 monohalides MX afforded single cube-type complexes [XM{(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}] (M=Li, X=Br (2), I (3); M=Na, X=I (4); M=In, X=I (5); M=Tl, X=I (6)). Analogous treatment of 1 with Group 2 and 14 dihalides MX(2) gave the corresponding adducts [I2M{(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}] (M=Mg (7), Ca (8), Sr (9)) and [Cl(2)M{(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}] (M=Sn (10), Pb (11)). The treatment of 1 with SnI2 or the reaction of 10 with MeI at 60 degrees C afforded two azametallocubane units linked by two bridging iodine atoms [{ISn(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}2(mu-I)2] (12). Indium triiodide reacted with 1 in toluene to form the adduct [I3In(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)] (13). Density functional theory calculations have been carried out to study these processes and evaluate the influence of the solvent. X-ray crystal structure determinations have been performed for complexes 10, 12, and 13.     

Macropolyhedral boron-containing cluster chemistry. Cluster opening and B-frame rearrangement in the reaction of B(16)H(20) with [{(IrCl(2)(eta(5)-C(5)Me(5))}(2)]. Synchrotron X-ray structures of [(eta(5)-C(5)Me(5))(2)Ir(2)B(16)H(17)Cl] and [(eta(5)-C(5)Me(5))(2)Ir(2)B(16)H(15)Cl

Products from the reaction of + nido ten-vertex : nido eight-vertex, B(16)H(20) with [{(IrCl(2)(eta(5)-C(5)Me(5))}(2)] and tmnd show unanticipated rearrangement of the starting {B(16)} skeleton, as exhibited by + nido ten-vertex : nido ten-vertex, [(eta(5)-C(5)Me(5))(2)Ir(2)B(16)H(17)Cl] which has a {B(2)} edge conjunction and by + nido ten-vertex : nido eleven-vertex, [(eta(5)-C(5)Me(5))(2)Ir(2)B(16)H(15)Cl] which has a {B(3)} face conjunction.     

Synthetic, reactivity, and structural studies on half-sandwich (eta5-C5Me5)Be and related compounds: halide, alkyl, and iminoacyl derivatives

The half-sandwich compounds [(eta(5)-C(5)Me(5))BeX] (X=Cl, 1 a; Br, 1 b), readily prepared from the reaction of the halides BeX(2) and M[C(5)Me(5)] (M=Na or K), are useful synthons for other (eta(5)-C(5)Me(5))Be organometallic compounds, including the alkyl derivatives [(eta(5)-C(5)Me(5))BeR] (R=Me, 2 a; CMe(3), 2 b; CH(2)CMe(3), 2 c; CH(2)Ph, 2 d). The latter compounds can be obtained by metathetical exchange of the halides 1 with the corresponding lithium reagent and exhibit NMR signals and other properties in accord with the proposed formulation. Attempts to make [(eta(5)-C(5)Me(5))BeH] have proved fruitless, probably due to instability of the hydride toward disproportionation into [Be(C(5)Me(5))(2)] and BeH(2). The half-sandwich iminoacyl [(eta(5)-C(5)Me(5))Be(C(NXyl)Cp')] and [(eta(5)-C(5)Me(4)H)Be(C(NXyl)Cp')]3, 6 where Xyl=C(6)H(3)-2,6-Me(2) and Cp'=C(5)Me(5) or C(5)Me(4)H, are formed when the beryllocenes [Be(C(5)Me(5))(2)], [Be(C(5)Me(4)H)(2)], and [Be(C(5)Me(5))(C(5)Me(4)H)] are allowed to react with CNXyl. Isolation of three different iminoacyl isomers from the reaction of the mixed-ring beryllocene [(eta(5)-C(5)Me(5))Be(eta(1)-C(5)Me(4)H)] and CNXyl, namely compounds 5 a, 5 b, and 6, provides compelling evidence for the existence in solution of different beryllocene isomers, generated in the course of two very facile processes that explain the solution dynamics of these metallocenes, that is the 1,5-sigmatropic shift of the Be(eta(5)-Cp') unit around the periphery of the eta(1)-Cp' ring, and the molecular inversion rearrangement that exchanges the roles of the two rings.     

A series of dinuclear homo- and heterometallic complexes with two or three bridging sulfido ligands derived from the tungsten tris(sulfido) complex [Et(4)N][(Me(2)Tp)WS(3)] (Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate)

The generation of heterobimetallic complexes with two or three bridging sulfido ligands from mononuclear tris(sulfido) complex of tungsten [Et(4)N][(Me(2)Tp)WS(3)] (1; Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate) and organometallic precursors is reported. Treatment of 1 with stoichiometric amounts of metal complexes such as [M(PPh(3))(4)] (M = Pt, Pd), [(PtMe(3))(4)(micro(3)-I)(4)], [M(cod)(PPh(3))(2)][PF(6)] (M = Ir, Rh; cod = 1,5-cyclooctadiene), [Rh(cod)(dppe)][PF(6)] (dppe = Ph(2)PCH(2)CH(2)PPh(2)), [CpIr(MeCN)(3)][PF(6)](2) (Cp = eta(5)-C(5)Me(5)), [CpRu(MeCN)(3)][PF(6)], and [M(CO)(3)(MeCN)(3)] (M = Mo, W) in MeCN or MeCN-THF at room temperature afforded either the doubly bridged complexes [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)M(PPh(3))] (M = Pt (3), Pd (4)), [(Me(2)Tp)W(=S)(micro-S)(2)M(cod)] (M = Ir, Rh (7)), [(Me(2)Tp)W(=S)(micro-S)(2)Rh(dppe)], [(Me(2)Tp)W(=S)(micro-S)(2)RuCp] (10), and [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)W(CO)(3)] (12) or the triply bridged complexes including [(Me(2)Tp)W(micro-S)(3)PtMe(3)] (5), [(Me(2)Tp)W(micro-S)(3)IrCp][PF(6)] (9), and [Et(4)N][(Me(2)Tp)W(micro-S)(3)Mo(CO)(3)] (11), depending on the nature of the incorporated metal fragment. The X-ray analyses have been undertaken to clarify the detailed structures of 3-5, 7, and 9-12.     

Studies of the synthesis and thermochemistry of coordinatively unsaturated chelate complexes (eta 5-C5Me5)IrL2 (L2 = TsNCH2CH2NTs, TsNCH2CO2, CO2CO2)

A comparative synthetic, structural, and thermochemical study on a series of chelate complexes containing the fragment (eta 5-C5Me5)Ir [(eta 5-C5Me5)Ir(TsNCH2CH2NTs) (1), (eta 5-C5Me5)Ir(TsNCH2CO2) (2), (eta 5-C5Me5)Ir(CO2CO2) (3)] was performed to clarify the roles of carboxylato and sulfonamido ligands. Whereas 1 and 2 are monomeric in solution and in the solid state, 3 appears to exist as an oligomer or polymer, (3)n, which can be broken up by addition of a ligand L such as a phosphine, CO, or 2-methoxypyridine to form (eta 5-C5Me5)Ir(L)(CO2CO2) (6). The synthesis of (3)n from [(eta 5-C5Me5)IrCl(mu-Cl)]2 required the use of silver oxalate in CH3CN, but if other solvents were used, the bridging oxalato complex (eta 5-C5Me5)IrCl(mu-eta 2-eta 2-C2O4)ClIr(eta 5-C5Me5) (7) was obtained and identified by X-ray diffraction. Enthalpies for reaction of THF-soluble monomers 1 and 2 with PMe3 were determined to be -28.7(0.5) and -28.5(0.4) kcal mol-1, respectively. The oligomerization behavior of 3 may be a result of reduced sigma- or pi-donation of carboxylato ligands compared to N-tosylamido ligands, because the values for nu CO in oxalato and bissulfonamido complexes 6-CO and (eta 5-C5Me5)Ir(CO)(TsNCH2CH2NTs) (4-CO) were 2064 and 2042 cm-1, respectively.     

Synthesis and characterisation of cyanodithioimidocarbonate [C2N2S2]2- complexes

[PPh4]2[M(C2N2S2)2](M = Pt, Pd) and [Pt(C2N2S2)(PR3)2](PR3= PMe2Ph, PPh3) and [Pt(C2N2S2)(PP)](PP = dppe, dppm, dppf) were all obtained by the reaction of the appropriate metal halide containing complex with potassium cyanodithioimidocarbonate. The dimeric cyanodithioimidocarbonate complexes [[Pt(C2N2S2)(PR3)]2](PR3 = PMe2Ph), [M[(C2N2S2)(eta5-C5Me5)]2](M = Rh, Ir)and [[Ru(C2N2S2)(eta6-p-MeC6H4iPr)]2] have been synthesised from the appropriate transition metal dimer starting material. The cyanodithioimidocarbonate ligand is S,S and bidentate in the monomeric complexes with the terminal CN group being approximately coplanar with the CS2 group and trigonal at nitrogen thus reducing the planar symmetry of the ligand. In the dimeric compound one of the sulfur atoms bridges two metal atoms with the core exhibiting a cubane-like geometry.