Coadsorption of CO and C6H6 on Co(0 0 0 1)

We have studied the influence of CO on the adsorption of benzene on the Co(0 0 0 1) surface using LEED, XPS, TDS and work function measurements. CO was found to reduce the benzene adsorption, but even at saturation CO exposure no complete blocking was observed. Thermal desorption of the coadsorbed layer featured CO and H₂ peaks indicating partial dehydrogenation of benzene and retaining of the CO bond. Ordered LEED structures were found with all coverages: Pre-adsorption of CO led to patterns already seen for pure carbon monoxide adsorption. Pre-adsorption of benzene showed the known structure of pure benzene also with small CO exposures, but higher CO exposures yielded a mixture of and patterns.     

Phase discrimination of iron-silicides on Si(0 0 1) surfaces by three-dimensional reciprocal-lattice mapping

Various iron-silicides are grown on clean Si(0 0 1) surfaces by solid phase epitaxy, a process which involves the deposition of iron and subsequent annealing [6]. Among them, we studied the structure of three-dimensional (3D) elongated islands, which are the major silicide type produced at lower Fe coverage (∼1 monolayer) and ?500-600 °C annealing. We applied a newly developed method of azimuth-scan reflection high-energy electron diffraction (RHEED) to obtain 3D reciprocal-lattice mapping. We succeeded in discriminating an α-FeSi₂ phase from controversial bulk phases of the islands, and we were also able to determine the orientation relation as and , where the lattice mismatches are −1% in direction and +34% in direction. The attenuation of the incident electron beam along the length direction of the islands leads to extremely weak spots in the RHEED pattern. We emphasize that such an analysis of the reciprocal-lattice mapping is also useful in studying other 3D island structures. Using scanning tunneling microscopy, we showed that the island’s elongated directions are perpendicular to the dimer rows of the substrate located under the islands. The islands are located near the S_B step edges. The elongation lengths of the islands are almost the same as the widths of the Si substrate terraces. We discussed the formation mechanism of the 3D-elongated islands. From an atomic image of the facet and edge of a 3D-elongated island, we proposed an atomic-structure model of the island facet and edge: a Si adatom on the hollow site of four Si atoms of an unit, with ordering in the direction of the elongation, forming an facet locally.     

Aromatic interactions in the close packing of phenyl-imides at Cu(1 1 0) surfaces

The oxidation of aniline at Cu(1 1 0) surfaces at 290 K has been studied by XPS and STM. A single chemisorbed product, assigned to a phenyl imide (C₆H₅N(a)), is formed together with water which desorbs. Reaction with preadsorbed oxygen results in a maximum surface concentration of phenyl imide of 2.8 × 10¹⁴ mol cm⁻² and a surface dominated by domains of three structures described by , and unit meshes. However, concentrations of phenyl imide of up to 3.3 × 10¹⁴ mol cm⁻² were obtained from the coadsorption of aniline and dioxygen (300:1 mixture) resulting in a highly ordered biphasic structure with and domains. Comparison of the STM and XPS data shows that only half the phenyl imides at the surface are imaged. Pi-stacking of the phenyl rings is proposed to account for this observation.     

Substantially low desorption barriers in recombinative desorption of deuterium from a Si(1 0 0) surface

We have studied desorption kinetics of deuterium molecules from a Si(1 0 0) surface by means of temperature-programmed desorption (TPD) spectra and isothermal desorptions.Three desorption components, denoted as β_1,A,β_1,B, and C, can be distinguished in semi-logarithmic plots of the TPD spectra.Their peak positions and intensities are strongly affected by the surface preparation methods employed, either with or without annealing to control the initial D coverage .Peak C appears at the leading edge of the TPD peak.It accounts for only about 5% of the TPD peak at and it diminishes rapidly with decreasing , vanishing at .In contrast, together the β_1,A and β_1,B peaks account for the whole TPD peak at any less than 1.0 ML. The maximum of the β_1,A peak is nearly constant at around the maximum temperature of the TPD peak.On the other hand, the β_1,B peak appears on the high-temperature side of the TPD peak and it systematically shifts to higher temperatures with decreasing .These results imply that first- and second-order kinetics are operating for the β_1,A and β_1,B desorptions, respectively.Isothermal desorption experiments confirm the above predicted kinetics for a limited region, namely .From the results for the rate curve analysis, the desorption barriers are evaluated to be 1.6 ± 0.1 eV and 1.8 ± 0.1 eV for the β_1,A and β_1,B desorptions, respectively.These values are substantially lower than the widely accepted value of ∼2.5 eV. To reproduce the measured TPD spectra we take the Arrhenius-type rate equation containing the first- and second-order rate terms for the β_1,A and β_1,B desorptions.The TPD spectra measured for can be reasonably fit with the proposed rate equation when the values given above for E_d,A and E_d,B are used. For , however, the TPD curves are not fit with the same values; rather, the best-fit curves require values for E_d,A and E_d,B larger than those given above. Combining the present kinetics results with those obtained by STM along with the studies, the β_1,A and β_1,B peaks may be attributed to desorption along the 2H path, while peak C may be attributed to desorption along the 4H path. The atomistic desorption mechanism as well as the energy relationship between the desorption barrier and isosteric heat of adsorption are discussed.     

Sapphire (0 0 0 1) surface modifications induced by long-pulse 1054 nm laser irradiation

We have investigated modifications of sapphire (0 0 0 1) surface with and without coating, induced by a single laser pulse with a 1054 nm wavelength, 2.2 s duration, 7.75 mm spot and energy of 20-110 J. A holographic optical element was used for smoothing the drive beam spatially, but it induced small hotspots which initiated damage on the uncoated and coated surfaces. The individual damage effects of hotspots became less pronounced at high fluences. Due to high temperature and elevated non-hydrostatic stresses upon laser irradiation, damage occurred as fracture, spallation, basal and rhombohedral twinning, melting, vitrification, the formation of nanocrystalline phases, and solid-solid phase transition. The extent of damage increased with laser fluences. The formation of regular linear patterns with three-fold symmetry ( directions) upon fracture was due to rhombohedral twinning. Nanocrystalline -Al₂O₃ formed possibly from vapor deposition on the coated surface and manifested linear, triangular and spiral growth patterns. Glass and minor amounts of -Al₂O₃ also formed from rapid quenching of the melt on this side. The - to -Al₂O₃ transition was observed on the uncoated surface in some partially spalled alumina, presumably caused by shearing. The nominal threshold for laser-induced damage is about 47 J cm⁻² for these laser pulses, and it is about 94 J cm⁻² at the hotspots.     

Modelling of phase transitions and reaction at CO adsorption on oxygen precovered Pd(1 1 1)

Using the interaction parameters up to the third neighbors and activated form of O and CO diffusion and their reaction, the model has been proposed for Monte-Carlo simulations describing the catalytic O + CO → CO₂ reaction and occurring phase transitions on Pd(1 1 1) surface. Upon adsorption of CO the pre-adsorbed oxygen transforms from p(2 × 2)_O phase into and phases in the limit of room and moderate temperatures, respectively. We demonstrate that the kinetic effects determine both the occurrence of the p(2 × 1)_O and disappearance of the phases at moderate and low temperatures, respectively. Using reaction rate as a fit parameter, we show that at room temperature the start of the reaction can be synchronized with the occurrence of phase.     

Photoemission study of the Li/Ge(1 1 1)-3 × 1 reconstruction

In this article we report our findings on the electronic structure of the Li induced Ge(1 1 1)-3 × 1 reconstruction as determined by angle-resolved ultraviolet photoelectron spectroscopy (ARUPS) and core-level spectroscopy using synchrotron radiation. The results are compared to the theoretical honeycomb-chain-channel (HCC) model for the 3 × 1 reconstruction as calculated using density functional theory (DFT). ARUPS measurements were performed in both the and directions of the 1 × 1 surface Brillouin zone at photon energies of 17 and 21.2 eV. Three surface related states were observed in the direction. In the direction, at least two surface states were seen. The calculated band structure using the single-domain HCC model for Li/Ge(1 1 1)-3 × 1 was in good agreement with experiment, allowing for the determination of the origin of the experimentally observed surface states. In the Ge 3d core-level spectra, two surface related components were identified, both at lower binding energy with respect to the Ge 3d bulk peak. Our DFT calculations of the surface core-level shifts were found to be in fair agreement with the experimental results. Finally, in contrast to the Li/Si(1 1 1)-3 × 1 case, no double bond between Ge atoms in the top layer was found.     

Absorption spectra of AsH2 radical in 435-510 nm by cavity ringdown spectroscopy

The absorption spectra of jet-cooled AsH₂ radicals were recorded in the wavelength range of 435-510 nm by cavity ringdown spectroscopy. The AsH₂ radicals were produced by pulsed DC discharge in a molecular beam of a mixture of AsH₃, SF₆, and argon. Seven vibronic bands with fine rotational structures have been identified and assigned as the , , and (n = 1-3) bands of the electronic transition. Based on the previous studies of AsH₂ radical, rotational assignments and rotational term values for each band were obtained, and the molecular parameters including vibrational constants, rotational constants, centrifugal distortion constants, and spin-rotation interaction constants were also determined.     

One-dimensional defects in iodine adlayers on Pt(1 0 0)

One-dimensional defect structures of closed-packed adlayers of iodine on Pt(1 0 0) were studied with scanning tunneling microscopy (STM). On the terraces of the Pt(1 0 0) surface we observed rotational domains with line defects running in [0 1 0] directions, in coexistence with nearly defect-free domains. In addition to these prevailing line defects (A-defects) with a local coverage lower than that of a defect-free surface, we report on much less frequently observed line defects with higher local coverages (B- and C-defects). The strong dependence of the concentration of these defects on the adsorption temperature is governed by the decrease of the overall iodine coverage with increasing temperature. Iodine adsorption at ∼1100 K leads to self-organization of A-defects in quasi-periodic arrangements. The relevance of these defects as important structural elements of commensurate superstructures of iodine on Pt(1 0 0) is stressed.     

Laser excitation spectrum of C3 in the region 26 000-30 700 cm

The vibrational structure of the electronic state of C₃ in the region 26 000-30 775 cm⁻¹ has been re-examined, using laser excitation spectra of jet-cooled molecules. Rotational constants and vibrational energies have been determined for over 60 previously-unreported vibronic levels; a number of other levels have been re-assigned. The vibrational structure is complicated by interactions between levels of the upper and lower Born-Oppenheimer components of the state, and by the effects of the double minimum potential in the Q₃ coordinate, recognized by Izuha and Yamanouchi [16]. The present work shows that there is also strong anharmonic resonance between the overtones of the ν₁ and ν₃ vibrations. For instance, the levels 2 1⁺ 1 and 0 1 ⁺ 3 are nearly degenerate in zero order, but as a result of the resonance they give rise to two levels 139 cm⁻¹ apart, centered about the expected position of the 2 1⁺ 1 level. With these irregularities recognized, every observed vibrational level up to 30 000 cm⁻¹ (a vibrational energy of over 5000 cm⁻¹) can now be assigned. A vibronic level at 30181.4 cm⁻¹, which has a much lower B′ rotational constant than nearby levels of the state, possibly represents the onset of vibronic perturbations by the electronic state; this state is so far unknown, but is predicted by the ab initio calculations of Ahmed et al. [36].     

Diode laser spectroscopy of ammonia at 760 nm

A tunable diode laser spectrometer has been employed to examine the unknown overtone absorption lines of NH₃ around (760 nm). The spectrometer sources are commercially available heterostructure AlGaAs tunable diode lasers operating in the “free-running” mode. The detection of the lines has been possible by the use of the wavelength modulation spectroscopy and the second harmonic detection technique. A special algorithm has been used in order to fit the highly modulated absorption lines. The weakest observed resonances have absorption cross sections on the order of ?/molecule or ?/amagat. For some of the more intense lines self-, air-, N₂-, He- and H₂-broadening coefficients have been obtained at room temperature and also some shifting coefficients have been measured.     

Atomic structure of thin dysprosium-silicide layers on Si(1 1 1)

We report on scanning tunneling microscopy results of thin dysprosium-silicide layers formed on Si(1 1 1). In the submonolayer regime, both a and a 5 × 2 superstructure were found. Based on images taken at different tunneling conditions, a structure model could be developed for the superstructure. For one monolayer, a 1 × 1 superstructure based on hexagonal DySi₂ was observed, while several monolayers thick films are characterized by a superstructure from Dy₃Si₅.     

GaN/LiNbO3 (0 0 0 1) interface formation calculated from first-principles

The stable adsorption sites for both Ga and N ions on the ideal and on the reconstructed LiNbO₃ (0 0 0 1) surface are determined by means of first-principle total energy calculations. A single N layer is found to be more strongly bound to the substrate than a single Ga layer. The adsorption of a GaN monolayer on the polar substrate within different orientations is then modeled. On the basis of our results, we propose a microscopic model for the GaN/LiNbO₃ interface. The GaN and LiNbO₃ (0 0 0 1) planes are parallel, but rotated by 30° each other, with in-plane epitaxial relationship [1 0 0]_GaN‖ [1 1  0]_LiNbO3. In this way the (0 0 0 1) plane lattice mismatch between GaN and LiNbO₃ is minimal and equal to 6.9% of the GaN lattice constant. The adsorbed GaN and the underlying LiNbO₃ substrate have parallel c-axes.     

Vibronic spectra, ab initio calculations, and structures of conformationally non-rigid molecules of oxalyl halides in the ground and lowest excited electronic states. Part I: Reanalysis of the 3680 Å and 4100 Å absorption systems of oxalyl chloride

The vapor-phase absorption spectrum of oxalyl chloride in the 3000-4180 Å region has been re-examined at high resolution. Singlet-singlet and singlet-triplet electronic transitions of the trans-conformer found in the spectrum are in agreement with earlier works [W.J. Balfour, G.W. King, J. Mol. Spectrosc. 26 (1968) 384-397; ibid. 27 (1968) 432-442]. Torsion levels of trans-oxalyl chloride in the ground and excited and states were found for the first time. Ab initio calculations of structures for conformers of oxalyl chloride in the ground and lowest excited electronic states explain the absence of second conformer transitions in the vibronic absorption spectrum.     

Repulsive and bound parts of the interatomic potentials of the lowest singlet electronic energy states of the MeRg complexes (Me = Zn, Cd; Rg = He, Ne, Ar, Kr, Xe)

Laser-induced fluorescence excitation spectra of MeRg (Me = Zn, Cd; Rg = He, Ne, Ar, Kr, Xe) complexes were recorded using the D¹ ← X¹ free ← bound transition. The complexes were produced in their ground state in a free-jet expansion beam and excited with a dye-laser beam directly to the excited state. Analysis of free ← bound unstructured profiles provided a shape of the repulsive part of the D¹-state potentials. Valence ab initio calculations of the ZnRg and CdRg ground- and excited-state potentials and electronic transition dipole moments for the studied transition were performed, taking scalar relativistic and spin-orbit effects into account. Results of the calculations show regularities and correlations in the repulsive branches and bound wells of the X¹- and D¹-state potentials as well as provide information on the bonding character in both electronic energy states. The trends were compared with available experimental results for ZnRg and CdRg as well as for MgRg and HgRg.     

Electronic structure of the Sb-induced Si(1 1 3)2 × 5 surface

The surface electronic structure of Sb/Si(1 1 3)2 × 5 was investigated by angle-resolved photoemission spectroscopy experiments. This reveals Sb/Si(1 1 3)2 × 5 to have three surface bands with anisotropic two-dimensional characteristics. The band widths of the surface bands along is larger than along . The number of surface bands of Sb/Si(1 1 3)2 × 5 and their band dispersions along and are quite analogous with those of Sb/Si(1 1 3)2 × 2 composed of Sb adatom and Si tetramer chains. The electronic structure analogy suggests that Sb/Si(1 1 3)2 × 5 and Sb/Si(1 1 3)2 × 2 have common building blocks such as Sb adatom and Si tetramer chains.     

CO oxidation on Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces studied by infrared chemiluminescence spectroscopy

The infrared (IR) chemiluminescence studies of CO₂ formed during steady-state CO oxidation over Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces were carried out. Analysis of their emission spectra indicates that the order of the average vibrational temperature () values of CO₂ formed during CO oxidation was as follows: Pd(1 1 1) > Pt(1 1 1) > Rh(1 1 1), and the order is coincident with the potential energy in the transition state expected by the theoretical calculations. Furthermore, it is suggested that the bending vibrational temperature () can also be influenced by the angle of O-C-O (∠_OCO) of the activated complex in the transition state, which has also been proposed by the theoretical calculations.