Synthesis of <Emphasis Type="Italic">α</Emphasis>-chloropyridine derivatives of <Emphasis Type="Italic">γ</Emphasis>-aminobutyric acid

The sodium salt of N-(6-chloronicotinoyl)-γ-aminobutyric acid, a structural analog of the known nootropic and vasidilating drug picamilon, was synthesized via Schotten–Baumann acylation of γ-aminobutyric acid with 6-chloronicotinoyl chloride and subsequent neutralization of the N-(6-chloronicotinoyl)-γ-aminobutyric acid that was obtained in >60% yield.     

Characterization of ethyl chloroformate derivative of <Emphasis Type="Italic">β</Emphasis>-methylamino-<Emphasis Type="SmallCaps">l</Emphasis>-alanine

Beta-methylamino-L-alanine (BMAA) is a neurotoxic amino acid that can be produced by cyanobacteria in aqueous environments. To analyze this compound by gas chromatography/mass spectrometry (GC/MS), BMAA must be derivatized to a nonpolar, volatile compound. This can be accomplished by reacting BMAA with ethyl chloroformate. While carrying out electron ionization (EI) mass spectrometric analysis on the (13)C-labeled derivative, it was discovered that the formation of an ion with a peak at m/z 245.12 is the result of [CH(3)CH(2)O.] loss from the amino groups resulting from alpha-cleavage. This differs from previous reports that attributed this peak to alpha-cleavage of the carboxylic ester portion of the BMAA derivative. This finding is important for understanding BMAA derivative mass spectrometric fragmentation patterns and ultimately to properly identifying and quantifying BMAA. Fragmentation pathways for the formation of other major peaks observed in the EI mass spectra are also proposed.     

<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

Alkyl <Emphasis Type="Italic">β</Emphasis>-<Emphasis Type="SmallCaps">d</Emphasis>-cellulosides: non-reducing cellulose mimics

Non-reducing cellulose mimics, termed alkyl β-d-cellulosides, were successfully prepared by two efficient multi-step syntheses starting from commercially available microcrystalline cellulose or cellulose triacetate. Introduction of the alkoxy moiety and degradation of the cellulose backbone was carried out in the presence of a Lewis acid, on one hand. On the other hand, cellulose hydrolysis mediated by mineral acids was combined with β-glycosidation performed in the presence of silver salts. The samples obtained possess a number-average degree of polymerization from 5 to 25, determined by size-exclusion chromatography, elemental analyses, NMR spectroscopy, and MALDI-TOF mass spectrometry. Samples in multi-gram quantities were available. Selective formation of a β-glycosidic bond between the C-1 atom of the reducing end group and alkoxy moieties was confirmed by a combination of 2D NMR spectroscopic and MALDI-TOF MS techniques. Due to the blocking of the aldehyde function, the cellulosides described are very useful mimics for the investigation of polysaccharide interactions with other complex molecules such as proteins or to determine polymer properties in solution or in solid state.     

Synthesis of 20<Emphasis Type="Italic">S</Emphasis>-protopanaxadiol <Emphasis Type="Italic">β</Emphasis>-D-galactopyranosides

20S-Protopanaxadiol (3β,12β,20S-trihydroxydammar-24-ene) 3-, 12-, and 20-O-β-D-galactopyranosides were synthesized for the first time. Condensation of 12β-acetoxy-3β,20S-dihydroxydammar-24-ene (1) and 2,3,4,6-tetra-O-acetyl-α-D-galactopyranosylbromide (α-acetobromogalactose) (2) under Koenigs–Knorr conditions with subsequent removal of the protecting groups resulted in regio- and stereoselective formation of 20S-protopanaxadiol 3-O-β-D-galactopyranoside, an analog of the natural ginsenoside Rh₂. Glycosylation of 12β,20S-dihydroxydammar-24-en-3-one (5) by 2 with subsequent treatment of the reaction products with NaBH₄ in isopropanol and deacetylation with NaOMe gave 20S-protopanaxadiol 12- and 20-O-β-Dgalactopyranosides.     

Enantioselective extraction of mandelic acid enantiomers by <Emphasis Type="SmallCaps">L</Emphasis>-dipentyl tartrate and <Emphasis Type="Italic">β</Emphasis>-cyclodextrin as binary chiral selectors

A new binary chiral selector system effective for the enantioselective extraction of racemic mandelic acid is presented. While L-dipentyl tartrate and β-cyclodextrin had a very low enantioselectivity as single selectors, a preferential extraction of D-mandelic acid to the organic phase was found in the binary selector system. Using decanol as organic solvent and pH of a phoshate buffer equal to 2.3, the distribution coefficients of D-and L-mandelic acids as high as 14.9 and 7.0, respectively, and the enantioselectivity value of 2.1 were found at optimum concentration of β-cyclodextrin.     

Directed Aminomethylation of Pyrrole,Indole, and Carbazole with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>-Tetramethylmethanediamine

Catalytic aminomethylation of pyrrole and indole with N,N,N′,N′-tetramethylmethanediamine in the presence of 5 mol % of ZrOCl₂·8H₂O proceeds selectively at the positions 2, 5 of pyrrole and 1, 3 of indole. Carbazole under the same conditions affords 3-formyl-9-aminomethyl derivative. The reaction in the presence of 5 mol % of K₂CO₃ occurs as monoaminomethylation: for pyrrole at the position 2, for indole at the position 3, and for carbazole at the nitrogen atom of the substrate. Water-soluble 1,1′-(1H-pyrrole-2,5-diyl)bis(N,N-dimethylmethanamine) exhibits a fungistatic activity with respect to phytopathogenic fungi Rhizoctonia solani.     

Enhanced Production of an Extracellular β-<Emphasis Type="SmallCaps">d</Emphasis>-Fructofuranosidase Fructohydrolase from a 2-Deoxy-<Emphasis Type="SmallCaps">d</Emphasis>-glucose Stabilized Mutant of <Emphasis Type="Italic">Candida utilis</Emphasis>

The enzyme β-d-fructofuranosidase fructohydrolase (FFH) cleaves the α-1,4 glycosidic linkage between α-d-glucose and β-d-fructose molecules of sucrose, releasing monosaccharides by hydrolysis. In the present study, FFH production in Candida utilis GC-46, a lipolytic wild yeast strain was improved by exposure to N-methyl N-nitro N-nitroso guanidine (NG) and 2-deoxy-d-glucose (2dg) at various levels. The mutant strain NG-5 was obtained after exposure to 0.06 mg/ml of NG for 20 min. NG-5 offers improved extracellular FFH production (34 ± 2.6 U/ml/min) when compared to the wild strain (1.15 ± 0.01 U/ml/min). A 40-fold increase of FFH (45.65 ± 2.0 U/ml/min) was achieved when the process parameters, including incubation period (48 h), sucrose concentration (5.0 g/l), initial pH (6.0), inoculum size (2.0% v/v, 16 h old), and urea concentration (0.2%, w/v) were identified using Plackett–Burman design. The kinetic parameters viz. Q _p (0.723 U/g/h), Y _p/s (2.036 U/g), and q _p (0.091 U/g yeast cells/h) indicate that NG-5 is a hyperproducer of extracellular FFH with a concomitant increase in growth rate. The volumetric productivity of NG-5 was over sixfold improved over the parental strain. The enzyme production improvement is highly significant (HS, LSD 0.042, p ≤ 0.05), indicating commercial utility.     

Complex formation of magnesium and calcium ions with trimethylenediamine-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>’,<Emphasis Type="Italic">N</Emphasis>’-tetraacetic acid

Stability constants and heat effects of the formation reactions of magnesium and calcium trimethylenediaminetetraacetates at 298.15 K and ionic strength of 0.1, 0.5, and 1.0 (mol/L KNO₃) have been determined by means of potentiometry and calorimetry. Standard thermodynamic parameters (log K⁰, Δ_rG⁰, Δ_rH⁰, and Δ_rS⁰) of the studied equilibriums have been determined.     

<Emphasis Type="Italic">β</Emphasis>-Chloro-<Emphasis Type="Italic">α</Emphasis>,<Emphasis Type="Italic">β</Emphasis>-unsaturated carbonyls as convenient precursors of highly substituted benzenes

The Diels–Alder reactions of three β-chloro-α,β-unsaturated carbonyl compounds 1–3 with different dienes were carried out to afford highly functionalized cyclohexenes 4–9, bearing quaternary centers, in good yields. These cycloadducts (CAs) undergo dehydrochlorination with subsequent aromatization in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene DBU to produce new substituted benzenes 11–14. Compound 10 is the product of lactonization and removal of an HCl molecule from compound 7. All products were characterized by NMR, IR, elementary analysis and some of them by MS. Structure assignments of isomers were carried out on the basis of NMR chemical shifts and coupling constants using 1D, 2D and heteronOe NMR techniques.     

10<Emphasis Type="Italic">α</Emphasis>-Hydroxy-<Emphasis Type="Italic">β</Emphasis>-isomorphine,a by-product of the synthesis of 10<Emphasis Type="Italic">α</Emphasis>-hydroxymorphine

Abstract  A new compound was isolated from the reaction mixture after O-demethylation of 6-O-acetyl-10α-acetoxycodeine with boron tribromide. The structure of this compound, 10α-hydroxy-β-isomorphine, was elucidated by spectral data, and its spatial arrangement was deduced from an NOE experiment. Capillary zone electrophoresis was used for separation of morphine and its 10-hydroxy analogues. Graphical abstract        

An efficient synthesis of <Emphasis Type="Italic">β</Emphasis>-methoxycarbonyl-<Emphasis Type="Italic">γ</Emphasis>-butyrolactones

β-Methoxycarbonyl-γ-butyrolactones bearing a γ-aromatic substituent were prepared via copper-catalyzed reductive aldol addition/lactonization domino reactions of ketones with α,β-unsaturated dicarboxylate esters and a silane under ambient temperature. The reaction has advantage of using readily available reagents, mild conditions and high efficiency.     

Metal-Chelate Affinity Precipitation with Thermo-Responsive Polymer for Purification of <Emphasis Type="Italic">ε</Emphasis>-Poly-<Emphasis Type="SmallCaps">l</Emphasis>-Lysine

ε-Poly-l-lysine (ε-PL) is a natural preservative for food processing industry. A thermo-responsive polymer, attached with Cu²⁺ or Ni²⁺, was prepared for metal-chelate affinity precipitation for purification of ε-PL. The low critical solution temperatures (LCSTs) of these polymers were close to the room temperature (31.0–35.0 °C). The optimal adsorption conditions were as follows: pH 4.0, 0 mol/L NaCl, ligand density 75.00 μmol/g, and 120 min. The ligand Cu²⁺ showed a stronger affinity interaction with ε-PL and the highest adsorption amount reached 251.93 mg/g polymer. The elution recovery of ε-PL could be 98.42% with 0.50 mol/L imidazole (pH = 8.0) as the eluent. The method could purify ε-PL from fermentation broth and the final product was proved as electrophoretic pure by SDS-PAGE. Moreover, these affinity polymers could be recycled after the purification of ε-PL and the recoveries were above 95.00%.

Open image in new window

Graphical Abstract Scheme for affinity precipitation of ε-PL

     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.     

Thermophysical properties of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimеthylacetamide mixtures with <Emphasis Type="Italic">n</Emphasis>-butanol

The refraction, dielectric, viscosity, density, data of the binary mixtures of N,N-dimethylacetamide (DMA) with n-butanol at 308.15 and 313.15 K. The measured parameters used to obtain derived properties like Bruggeman factor, molar refraction and excess static dielectric constant, excess inverse relaxation time, excess molar volume and excess viscosity, excess molar refraction. The variation in magnitude with composition and temperature of these quantities has been used to discuss the type, strength and nature of binary interactions. Results confirm that there are strong hydrogen-bond interactions between unlike molecules of DMA+ n-butanol mixtures and that 1: 1 complexes are formed and strength of intermolecular interaction increases with temperature.     

Spectroscopic and electrical characterization of <Emphasis Type="Italic">α</Emphasis>,<Emphasis Type="Italic">γ</Emphasis>-bisdiphenylene-<Emphasis Type="Italic">β</Emphasis>-phenylallyl radical as an organic semiconductor

The semiconductor properties of the earliest known stable radical, α,γ-bisdiphenylene-β-phenylallyl radical (Koelsch radical, 1^?) were assessed using spectroscopic and electrical techniques. This radical undergoes reversible redox processes, and it has low redox potentials. In addition, 1^? possesses long wavelength absorption bands, owing to the existence of a singly-occupied molecular orbital whose energy level lies between those of the HOMO and LUMO. A spin-coated thin-film of 1^? displays photocurrent and an electron mobility of 6.3 × 10^?7 cm² V^?1 s^?1 on a trially-fabricated organic field effect transistor.     

Properties of poly(<Emphasis Type="Italic">γ</Emphasis>-benzyl <Emphasis Type="SmallCaps">l</Emphasis>-glutamate) membrane modified by polyurethane containing carboxyl group

A series of poly(γ-benzyl l-glutamate) (PBLG)/polyurethane (PU) containing carboxyl group blend membranes was prepared by casting the polymer blend solution in dimethylformamide (DMF). The surface morphology of the PBLG/PU blend membranes was investigated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Thermal, mechanical, and chemical properties of PBLG/PU blend membranes were studied by differential scanning calorimetry (DSC), tensile tests and other physical methods. It was revealed that the introduction of PU could exert outstanding effects on the morphology and the properties of PBLG membrane.     

Study of<Emphasis Type="Italic"> β</Emphasis>–<Emphasis Type="Italic">α</Emphasis> recrystallization of the polypropylene

The crystalline modifications and of polypropylene (PP) were studied by using polarized light microscopy (PLM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). Typically crystals surrounded by spherulites were observed at low temperature. With increasing temperature the crystals melted and a new crystal appeared. More interestingly, the melting temperature of the new crystal was about 5 ° higher than that of spherulites originally present in the sample formed isothermally. It was assumed that this new crystal was the recrystalline crystal. This assumption was supported by the DSC results. Furthermore, the crystallization kinetics of the PP used was studied on the basis of the traditional Avrami analysis. As a result, the Avrami exponents of crystallization temperature from 120 to 130 °C ranged between 4.21 and 3.60, indicating that the crystallization mechanism of PP order melt was spherulitic growth and random nucleation.