A three component one-pot synthesis of N-amino-2-pyridone derivatives catalyzed by KF-Al2O3

Synthesis of 1,6-diamino-4-phenyl-3,5-dicyano-2-pyridone derivatives via a one-pot, three-component reaction of aryl aldehydes, malononitrile, and cyanoacetic hydrazide at room temperature using KF-Al₂O₃ as a recyclable catalyst have been developed. The reaction proceeds through the initial Knoevenagel condensation between aldehyde and malononitrile in the presence of KF-Al₂O₃ to form the benzylidene derivative which then undergoes Michael addition with cyanoacetic hydrazide followed by intramolecular cyclization of the resulting intermediate to produce the N-amino-2-pyridones in good to excellent yields. The structure of the synthesized compounds were characterized and established on the basis of their spectral data analysis and single-crystal XRD analysis.     

Sonochemical synthesis of chromenes catalyzed by L-phenyl alanine-attached nano-Fe3O4@SiO2

An efficient multi-component synthesis of 10,10-dimethyl-7-(phenyl)-10,11-dihydrochromeno[4,3-b]chromene-6,8(7H,9H)-diones is described by a one-pot condensation reaction of aldehydes, dimedone and 4-hydroxycoumarin using L-phenyl alanine tethered to nano-Fe₃O₄@SiO₂ under ultrasonic irradiation. The catalyst has been characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), scanning electron microscope (SEM), Energy-dispersive X-ray spectroscopy (EDX), thermal gravimetric analysis (TGA) and vibrating-sample magnetometer (VSM). Atom economy, wide range of products, high catalytic activity, excellent yields in short reaction times, reusability of the catalyst and low catalyst loading are some of the important features of this protocol.     

MoO3-C3N4复合光催化剂的可见光下高效催化降解甲基橙

以钼酸铵和C₃N₄为前驱体,利用浸渍法成功制备了高性能MoO₃-C₃N₄复合光催化剂,利用X射线衍射（XRD）、傅里叶红外（FT-IR）、高分辨电镜（HRTEM）及N₂吸附-脱附曲线等测试手段对所得MoO₃-C₃N₄光催化剂进行了结构和形貌表征。以可见光下光催化降解甲基橙反应表征MoO₃-C₃N₄的光催化活性。实验结果表明,MoO₃-C₃N₄光催化剂具有非常好的光催化降解性能,且MoO₃含量对反应活性产生显著影响。当MoO₃含量为1.6%（w/w）时光催化活性最好,其速率常数达到C₃N₄的50倍。通过研究发现该复合催化剂的高活性来自于其Z型光生载流子传输过程,抑制了光生电子空穴对的复合并延长了引入MoO₃产生的载流子的寿命。     

InCl3 catalyzed carbene insertion into O-H bonds: efficient synthesis of ethers

An efficient InCl₃ mediated insertion of the carbene fragment (:CHCO₂Et), generated in situ from ethyl diazoacetate into O-H bond of a series of saturated and unsaturated alcohols under mild conditions has been developed to afford the corresponding ethers as exclusive products in good to high yields (70-95%) and in shorter reaction times. In the case of unsaturated alcohols, the reaction proceeded with unprecedented selectivity resulting in ethers as the only products and in high yields.     

一锅法制备Co3O4/g-C3N4复合光催化剂及其光催化性能

以三聚氰胺和六水合氯化钴为原料,一锅法制备Co_3O_4负载的多孔石墨相氮化碳(Co_3O_4/g-C_3N_4)复合光催化材料。采用X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、光致发光光谱(PL)等手段对其结构和光学特性进行表征。以盐酸四环素(TC)为目标污染物,评价了不同负载量Co_3O_4/g-C_3N_4复合光催化剂的可见光催化性能。结果表明,所制备的Co_3O_4/g-C_3N_4复合光催化剂为多孔结构,其比表面积较大,并在可见光区域具有显著的吸收。利用原位生成的Co_3O_4纳米粒子在氮化碳表面形成异质结构,可有效转移光生载流子,降低光生电子-空穴的再结合率,从而提高光催化活性。并且存在最佳Co_3O_4复合量,当六水合氯化钴加入量为三聚氰胺的8%(w/w)时,所制备的复合光催化剂CoCN-8具有最佳的光催化性能。在可见光的照射下,60 min内可降解85%的TC,而同样条件下,纯g-C_3N_4仅降解23%的TC。     

叶酸对磁性Fe_3O_4纳米粒子的表面修饰

以FeCl3·6H2O作为单一铁源,1,6-己二胺作为胺化试剂,利用无模板的溶剂热方法制备了胺基功能化的磁性Fe3O4纳米粒子,并利用其键合叶酸分子,制备出表面修饰了叶酸的磁性Fe3O4复合纳米粒子。利用傅里叶变换红外光谱仪、X-射线衍射仪、透射电镜、差热-热重分析仪和振动样品磁强计对所得纳米粒子的形貌、粒径、化学组成和磁性能进行了表征。结果表明,叶酸分子通过化学键牢固键合在磁性纳米Fe3O4粒子表面,叶酸修饰的复合纳米粒子仍然具有良好的磁性能。     

Rare earth perfluorooctanoate [RE(PFO)3] catalyzed one-pot synthesis of benzopyran derivatives

Rare earth perfluorooctanoate [RE(PFO)₃] catalyzes facile condensation of dimedone, aldehydes and malononitrile under mild conditions to afford the corresponding 5-oxo-5,6,7,8-tetrahydro-4H-benzo-[b]-pyran derivatives in good to high yields. The catalyst can be easy to prepare, stable and storable, easily recycled and reused for several cycles with consistent activity.     

A simple conversion of azlactones into indenones via H3PW12O40/Al2O3 catalyzed intramolecular Friedel-Crafts reaction

A rapid and simple procedure for the synthesis of the indenone derivatives, N-(1-oxo-1H-inden-2-yl)benzamides, via intramolecular Friedel-Crafts (IFC) reaction of (Z)-4-arylidene-2-phenyl-5(4)-oxazolones (azlactones) catalyzed by H₃PW₁₂O₄₀ supported on neutral alumina under microwave irradiation has been developed. The reaction is straightforward and allows easy isolation of the product. The catalyst could be re-used up to four times after simple filtration.     

核-隔层-壳结构Fe3O4@MoO3@mSiO2纳米载体的合成及其药物可控释放

利用加热均匀、迅速、热平稳性好和安全性高的微波热响应来实现药物的微波可控释放。引入具有微波热响应性质、热稳定性和化学稳定性好的Mo O3作为微波吸收物质,制备了核-隔层-壳结构Fe_3O_4@MoO_3@mSiO_2纳米药物载体。研究该纳米载体对药物布洛芬(IBU)的负载和微波响应可控释放过程。该纳米载体具有高的比表面积(222 cm2·g-1)和较大的孔隙体积(0.14 cm3·g-1)可用来负载药物。同时还具有较好的磁响应性,可实现药物的靶向给药,具有相对好的微波热响应性,可通过MoO_3中间层吸收微波辐射实现药物的可控释放。结果表明,在持续微波辐射360 min时IBU的释放率达到86%,远远高于仅搅拌时的释放率。     

Highly Efficient Ag3PO4/g-C3N4 Z-Scheme Photocatalyst for Its Enhanced Photocatalytic Performance in Degradation of Rhodamine B and Phenol

Ag₃PO₄/g-C₃N₄ heterojunctions, with different g-C₃N₄ dosages, were synthesized using an in situ deposition method, and the photocatalytic performance of g-C₃N₄/Ag₃PO₄ heterojunctions was studied under simulated sunlight conditions. The results revealed that Ag₃PO₄/g-C₃N₄ exhibited excellent photocatalytic degradation activity for rhodamine B (Rh B) and phenol under the same light conditions. When the dosage of g-C₃N₄ was 30%, the degradation rate of Rh B at 9 min and phenol at 30 min was found to be 99.4% and 97.3%, respectively. After five cycles of the degradation experiment for Rh B, g-C₃N₄/Ag₃PO₄ still demonstrated stable photodegradation characteristics. The significant improvement in the photocatalytic activity and stability of g-C₃N₄/Ag₃PO₄ was attributed to the rapid charge separation between g-C₃N₄ and Ag₃PO₄ during the Z-scheme charge transfer and recombination process.     

核-隔层-壳结构Fe3O4@MoO3@mSiO2纳米载体的合成及其药物可控释放

利用加热均匀、迅速、热平稳性好和安全性高的微波热响应来实现药物的微波可控释放。引入具有微波热响应性质、热稳定性和化学稳定性好的MoO₃作为微波吸收物质,制备了核-隔层-壳结构Fe₃O₄@MoO₃@mSiO₂纳米药物载体。研究该纳米载体对药物布洛芬（IBU）的负载和微波响应可控释放过程。该纳米载体具有高的比表面积（222 cm²·g^-1）和较大的孔隙体积（0.14 cm³· g^-1）可用来负载药物。同时还具有较好的磁响应性,可实现药物的靶向给药,具有相对好的微波热响应性,可通过MoO₃中间层吸收微波辐射实现药物的可控释放。结果表明,在持续微波辐射360 min时IBU的释放率达到86%,远远高于仅搅拌时的释放率。     

PbCu3(OH)(NO3)(SeO3)3·1/2H2O und Pb2Cu3O2(NO3)2(SeO3)2: Synthese und Kristallstrukturuntersuchung

Crystals of PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O [a=7.761(3)Å,b=9.478(4)Å,c=9.514(4)Å, =66.94(2)°, =69.83(2)°, =81.83(2)°, space group P ,Z=2] and Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ [a=5.884(2)Å,b=12.186(3)Å,c=19.371(4)Å, space group Cmc2₁,Z=4] were synthesized under hydrothermal conditions. Their crystal structures were refined with three-dimensional X-ray data toR _w=0.033 resp. 0.055. In PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O the Cu atoms are [4+1] and [4+2] coordinated and via SeO₃ groups a three-dimensional atomic arrangement is built up. In Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ there are sheets, which are connected only via Pb-O bonds ranging from 2.98 Å to 3.16 Å.

     

Selective oxidation of cyclopentene catalyzed by Pd(CH3COO)2-NPMoV under oxygen atmosphere

The selective oxidation of cyclopentene to cyclopentanone catalyzed by Pd(CH₃COO)₂-NPMoV was investigated under atmospheric oxygen in aqueous acetonitrile acidified by CH₃SO₃H. It was shown that the conversion of cyclopentene and the yield of cyclopentanone was nearly 100% and 94.6%, respectively, under the optimized reaction condition.     

Decolorization of C.I. Reactive Red 2 by ozonation catalyzed by Fe(II) and UV

This work evaluated the effects of pH on decolorization of C.I. Reactive Red 2 by O₃, O₃/Fe(II), UV/O₃ and UV/O₃/Fe(II) systems. At pH 4, the decolorization rate constants of O₃, O₃/Fe(II), UV/O₃ and UV/O₃/Fe(II) systems were 1.78, 3.11, 2.04 and 3.18 hr⁻¹, respectively. The decolorization rates and effective energy consumption constants of all systems were higher under basic conditions than under acidic conditions.     

Ag_3PO_4/MoS_2纳米片复合催化剂制备及可见光催化性能

采用机械球磨法成功制备Ag_3PO_4/MoS_2纳米片复合催化剂。运用X射线衍射仪(XRD)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis)和荧光发射光谱(PL)对复合催化剂的结构和形貌进行了表征。结果表明,Ag_3PO_4纳米粒子均匀地附着在MoS_2纳米片层结构上,两者形成紧密结合。以亚甲基蓝为模拟污染物,研究复合催化剂在可见光照射下的光催化特性;通过循环实验考察复合催化剂的稳定性。结果显示,含有1%的MoS_2纳米片与Ag_3PO_4形成的复合催化剂在30 min内对亚甲基蓝的降解率为95%,其降解动力学常数是纯相Ag_3PO_4的2倍。经过5次循环实验后复合催化剂对于亚甲基蓝的降解率为84%,而纯Ag_3PO_4对于亚甲基蓝的降解率仅为35%。Ag_3PO_4/MoS_2纳米片复合催化剂具有优良的光催化活性和高稳定性,主要归因于二硫化钼纳米片与磷酸银形成异质结,磷酸银激发的电子和二硫化钼纳米片产生的空穴直接复合,从而促使光生电子从磷酸银晶体表面快速分离,减轻了磷酸银的光电子腐蚀,同时也提高了复合物的光催化活性。     

FeCl3 catalyzed addition of activated methylenes to styrene derivatives under air

An efficient addition of activated methylene to styrene derivatives catalyzed by cheap and environment-friendly FeCl₃ was developed. The reaction can be carried out under ‘open-flask’ conditions in which no precautions were taken to exclude moisture and air.     

Konzentrationen von Isomeren des Typs P m As4−m X 3 in P4S3-As4S3- und P4Se3-As4Se3-Mischungen

The reactions of P₄S₃ with As₄S₃ and of P₄Se₃ with As₄Se₃ in the molten state yields molecules of the type P _m As_4–m S₃ and P _m As_4–m Se₃, respectively. A method was developed to separate the different components by the HPLC technique, and to determine their concentrations. The identification of the isomers in the HPLC pattern was achieved with the aid of the LC-MS method. In the selenium system, the distribution of the different species is statistical. In the system P₄S₃-As₄S₃, the formation of PAs₃S₃ with one phosphorus atom in the apical position is favoured.

     

Facile one-pot synthesis of 2-arylbenzothiazoles catalyzed by H3PO4/TiO2-ZrO2 (1/1) under solvent-free conditions

A highly efficient and simple protocol for the preparation of 2-arylbenzothiazoles through condensation of 2-aminothiophenol and different aldehydes in the presence of H₃PO₄/TiO₂-ZrO₂(1/1)-cetyl pyridinium bromide (CPB) is described. The reaction proceeded under mild and solvent-free conditions to afford 2-arylbenzothiazole derivatives. In this method, the title compounds were obtained in good to excellent yields and short reaction times. The structures of synthesized products were identified by infrared, ¹H NMR, ¹³C NMR, and mass spectroscopy.     

Ag3PO4/Ag2S/g-C3N4复合光催化剂的制备与性能

通过沉积法和离子交换法成功地制备了Ag_3PO_4/Ag_2S/g-C_3N_4复合型光催化剂。利用X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、N_2吸附-脱附等温线、紫外-可见漫反射光谱、荧光光谱等手段对样品进行了表征。通过降解罗丹明B考察其可见光催化活性及稳定性,研究了硫化钠与磷酸银物质的量的比值(n_(Na_2S)/n_(Ag_3PO_4))、g-C_3N_4添加量对所制备复合光催化材料性能的影响,同时对光催化机理进行了探讨。结果表明,随着n_(Na2S)/n_(Ag3PO4)的增加,所得复合催化材料活性先增加后降低;当n_(Na2S)/n_(Ag_3PO_4)为1.5%、g-C_3N_4与Ag_3PO_4的质量比为3∶7时制备的催化剂ASC1.5的光催化活性最好,在可见光照射下,40 min内可将罗丹明B完全降解,且5次循环使用后仍保持较高的催化活性。和Ag_3PO_4相比,Ag_3PO_4/Ag_2S/g-C_3N_4复合型光催化材料的活性与稳定性都得到明显提高,这主要归因于复合催化剂比表面积和孔结构的增加,载流子分离效率的提高。光催化机理研究表明,空穴(h~+)、超氧阴离子自由基(·O~(2-))和羟基自由基(·OH)都是光催化过程中的主要活性物种。三者作用大小依次为:h~+·O~(2-)·OH。     

g-C3N4纳米管的制备及其光催化降解性能

以三聚氰胺和碳酸氢铵混合物为原料,采用简便热解法制备g-C_3N_4纳米管。热解过程中碳酸氢铵分解释放出大量的NH3,能够诱导纳米管的形成。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、红外光谱(IR)、N_2吸附-脱附、紫外-可见漫反射光谱以及紫外可见光谱(UV)等分析测试方法对该光催化剂的微观形貌结构和催化性能进行了表征。以罗丹明光催化降解为模型反应研究了g-C_3N_4纳米管的光催化活性。g-C_3N_4纳米管的表面积明显增大,且能够有效地促进光生电子转移,在可见光下具有较强的光催化性能,降解率在60和120 min时分别能达到95%和99.4%,且循环重复利用5次后降解率不低于92%。