Study on the Nonisothermal Melt Crystallization Kinetics of DBS/PBT Blends

The modified Avrami, Mo, and Kissinger models were applied to investigate the nonisothermal melt crystallization process of dibenzylidene sorbitol (DBS)/poly(butylene terephthalate) (PBT) blends by differential scanning colorimetry (DSC) measurements. The modified Avrami model can describe the nonisothermal melt crystallization processes of DBS/PBT blends fairly well. The cooling rates and the blend composition affect the crystallization of the blends according to Mo crystallization kinetics parameters. The Mo model shows that F(T) increases with increasing crystallinity, indicating that the needed cooling rate when it reached a certain crystallinity increased in unit time, the crystallization rate of DBS/PBT blends is faster than the crystallization rate of pure PBT, and the crystallization rate of the DBS/PBT blends with 0.5% DBS is fastest. The Kissinger model showed that the crystallization activation energy of DBS/PBT blends is lower than the activation energy of pure PBT; the crystallization activation energy of the DBS/PBT blends with 0.5% DBS is the lowest.     

Effect of Organoclay Platelets on Crystallization of PTT/EPDM-g-MA Blends: Nonisothermal Melt Crystallization Kinetics

PTT/EPDM-g-MA (80/20 w/w) nanocomposites were prepared by melt mixing of poly(trimethylene terephthalate) (PTT), ethylene-propylene-diene copolymer grafted with maleic anhydride (EPDM-g-MA), and organoclay. The blend nanocomposites show typical sea-island morphologies. The nonisothermal crystallization kinetics of pure PTT and 80/20 (w/w) PTT/EPDM-g-MA blends with various amounts of the clay were extensively studied by differential scanning calorimetry (DSC). The Avrami, Ozawa, and Mo methods were used to describe the nonisothermal crystallization process of pure PTT and 80/20 (w/w) PTT/EPDM-g-MA blends with various amounts of the clay. Avrami analysis results show that the crystallization rates of 80/20 (w/w) PTT/EPDM-g-MA blends with the clay were faster than those of pure PTT or PTT/EPDM-g-MA blends without clay, which indicates that the clay particles promote crystallization effectively, in agreement with the Mo analysis results. Ozawa analysis can describe the nonisothermal crystallization of pure PTT very well but was rather inapplicable to the 80/20 (w/w) PTT/EPDM-g-MA blends with various amounts of the clay.     

Isothermal Melt Crystallization Kinetics for Poly(Trimethylene Terephthalate)/Poly(Butylene Terephthalate) Blends

The kinetics of isothermal melt crystallization of poly(trimethylene terephthalate) (PTT)/poly(butylene terephthalate) (PBT) blends were investigated using differential scanning calorimetry (DSC) over the crystallization temperature range of 184–192°C. Analysis of the data was carried out based on the Avrami equation. The values of the exponent found for all samples were between 2.0 and 3.0. The results indicated that the crystallization process tends to be two‐dimensional growth, which was consistent with the result of polarizing light microscopy (PLM). The activation energies were also determined by the Arrhenius equation for isothermal crystallization. The values of ΔE of PTT/PBT blends were greater than those for PTT and PBT. Lastly, using values of transport parameters common to many polymers (U*=6280 J/mol, T _∞=T _g – 30), together with experimentally determined values of T _m ⁰ and T _g, the nucleation parameter, K _g, for PTT, PBT, and PTT/PBT blends was estimated based on the Lauritzen–Hoffman theory.     

Non-Isothermal Crystallization Kinetics of Poly(Butylene Terephthalate)/Silica Nanocomposites

Poly(butylene terephthalate)/silica nanocomposites were prepared by in situ polymerization of terephthalic acid, 1,4-butanediol and silica. Transmission electron microscopy (TEM) was used to examine the quality of the dispersion of silica in the PBT matrix. The non-isothermal crystallization behavior of pure PBT and its nanocomposites was studied by differential scanning calorimetry (DSC). The results show that the crystallization peak temperatures of PBT/silica nanocomposites are higher than that of pure PBT at a given cooling rate. The values of halftime of crystallization indicate that silica could act as a heterogeneous nucleating agent in PBT crystallization and lead to an acceleration of crystallization. The non-isothermal crystallization data were analyzed with the Avrami, Ozawa, and Mo et al. models. The non-isothermal crystallization process of pure PBT and PBT/silica nanocomposites can be best described by the model developed by Mo et al. According to the Kissinger equation, the activation energies were found to be ?217.1, ?226.4, ?259.2, and ?260.2 kJ/mol for pure PBT and PBT/silica nanocomposites with silica weight content of 1, 3 and 5 wt%, respectively.     

Nonisothermal Crystallization Kinetics of Poly(Vinylidene Fluoride) in a Poly(Vinylidene Fluoride)/Poly(Methyl Methacrylate)/Dipropylene Glycol Dibenzoate System via Thermally Induced Phase Separation

The nonisothermal crystallization kinetics of poly(vinylidene fluoride) (PVDF) in PVDF/polymethyl methacrylate (PMMA)/dipropylene glycol dibenzoate (DPGDB) blends, where DPGDB served as a diluent, via solid–liquid (S-L) phase separation during a thermally induced phase separation process was investigated through differential scanning calorimetry (DSC) measurements. It was found that the Ozawa model could only describe the nonisothermal crystallization behavior of PVDF/PMMA/DPGDB system to some extent. The influence of the cooling rate and PMMA/PVDF weight ratio in the PVDF/PMMA/DPGDB system on the crystallization mechanism was also examined based on the Avrami–Jeziorny method and Mo method. Primary crystallization and secondary crystallization were observed in the Avrami–Jeziorny analysis. The analysis by the Avrami–Jeziorny and Mo models indicated that the increase of PMMA/PVDF weight ratio decreased the crystallization rate during the primary crystallization stage. The results showed that the Mo method could well explain the kinetics of the primary PVDF crystallization. The Avrami–Jeziorny method, however, could not well describe the nonisothermal crystallization process of PVDF in the primary crystallization stage. The activation energy, determined by the Kissinger method, was not suitable to reflect the PVDF crystallization process in the PVDF/PMMA/DPGDB system.     

Crystalline Morphology and Nonisothermal Crystallization Behaviors of iPP/PcBR Blends

Isotactic polypropylene/poly(cis‐butadiene) rubber (iPP/PcBR) blends were prepared by melt mixing. The influence of PcBR content on crystalline morphology and nonisothermal crystallization behaviors of iPP was investigated by polarized optical microscopy (POM), small angle light scattering (SALS), and differential scanning calorimetry (DSC). The POM showed that an increase of PcBR ranging from 10 vol% to 40 vol% led to less perfection of spherulites, vaguer boundaries between spherulites, and smaller spherulite size, which was quantitatively validated by SALS. The presence of PcBR also remarkably affected the nonisothermal crystallization behaviors of iPP. An addition of PcBR caused higher crystallization peak temperature and a faster crystallization rate, meaning a heterogeneous nucleation effect of PcBR upon crystallization of iPP. For the same sample, the crystallization peak temperature moved to lower temperature and the crystallization rate increased as the cooling rate increased. The Ozawa and combined Avrami and Ozawa equations were used to describe the nonisothermal crystallization process of iPP and blends. The combined Avrami and Ozawa equation was more appropriate for the crystallization of the blends. Crystallization activation energy of iPP and blends was calculated by the Kissinger equation; the result showed that crystallization activation energy decreased as the content of PcBR increased from 30 vol% to 40 vol%.     

Study on the Nonisothermal Crystallization Kinetics of Poly(Vinylidene Fluoride)/Tributyl Citrate Blends Via Thermally Induced Phase Separation

The nonisothermal crystallization kinetics of poly (vinylidene fluoride) (PVDF) in PVDF/tributyl citrate (TBC) blends having undergone thermally induced phase separation were investigated through differential scanning calorimetry measurements. Ozawa theory, Mo's method and Kissinger model were used to analyze the kinetics of the nonisothermal crystallization process. The Ozawa theory failed to describe the crystallization behavior of PVDF in the PVDF/TBC blends, whereas the Mo model was able to describe the nonisothermal crystallization process fairly well. The crystallization activation energy was determined by the Kissinger method, and was in the range of 90–165 kJ/mol.     

Nonisothermal Crystallization Kinetics of Miscible Blends of Polycaprolactone and Crosslinked Carboxylated Polyester Resin

The nonisothermal crystallization process of polycaprolactone (PCL)/crosslinked carboxylated polyester resin (CPER) blends has been investigated for different blend concentrations by differential scanning calorimetry (DSC). The DSC measurements were carried out under different cooling rates namely: 1, 3, 5, 10, and 20°C/min. Thermally induced crosslinking of CPER in the blends was accomplished using triglycidyl isocyanurate as a crosslinking agent at 200°C for 10 min. The cured PCL/CPER blends were transparent above the melting temperature of PCL and only one glass transition temperature, T_g, located in the temperature range between the two T_gs of the pure polymer components, was observed, indicating that PCL and crosslinked CPER are miscible over the entire range of concentration. The nonisothermal crystallization kinetics was analyzed based on different theoretical approaches, including modified Avrami, Ozawa, and combined Avrami–Ozawa methods. All of the different theoretical approaches successfully described the kinetic behavior of the nonisothermal crystallization process of PCL in the blends. In addition, the spherulitic growth rate was evaluated nonisothermally from the spherulitic morphologies at different temperatures using polarized optical microscope during cooling the molten sample. Only one master curve of temperature dependence of crystal growth rate could be constructed for PCL/CPER blends, regardless of different blend concentrations. Furthermore, the activation energy of nonisothermal crystallization process (ΔE_a) was calculated as a function of blend concentration based on the Kissinger equation. The value of ΔE_a was found to be concentration dependent, i.e., increasing from 83 kJ/mol for pure PCL to 115 and 119 kJ/mol for 75 and 50 wt% PCL, respectively. This finding suggested that CPER could significantly restrict the dynamics of the PCL chain segments, thereby inhibit the crystallization process and consequently elevate the ΔE_a.     

Mechanical Property,Crystal Morphology,and Nonisothermal Crystallization Kinetics of Poly(Trimethylene Terephthalate)/Maleinized Acrylonitrile-Butadiene-Styrene Blends

The mechanical properties, morphology, crystallization, and melting behaviors and nonisothermal crystallization kinetics of poly (trimethylene terephthalate)(PTT)/maleinized acrylonitrile-butadiene-styrene (ABS-g-MAH) blends were investigated by an impact tester, polarized optical microscopy, and differential scanning calorimetry (DSC). The results suggested that the ABS-g-MAH component served as both a nucleating agent for increasing the crystallization rate and as a toughening agent for improving the impact strength of PTT. When the ABS-g-MAH content was 5wt.%, the blend had the best toughness and a high crystallization rate. The blends showed different crystallization rates and subsequent melting behaviors due to their different ABS-g-MAH contents. The Ozawa theory and the method developed by Mo and coworkers were used to study the nonisothermal crystallization kinetics of the blends. The kinetic crystallization rate parameters suggested that the proper contents of ABS-g-MAH can highly accelerate the crystallization rate of PTT, but this effect nearly reaches saturation for ABS-g-MAH contents over 5%. The Ozawa exponents calculated from the DSC data suggested that the PTT crystals in the blends have similar growth dimensions as those in neat PTT, although they are smaller and/or imperfect. The effective activation energy calculated by the method developed by Kissinger also indicates that the blends with higher ABS-g-MAH content were easier to crystallize.     

ZnO nanoparticles favours heterogeneous nucleation in PET–ZnO nanocomposites

The structural and chemical properties with non-isothermal crystallization kinetics of PET–ZnO nanocomposites have been reported in this article. ZnO nanoparticles have been synthesized via chemical route with average diameter 19 nm which made confirm by transmission electron microscopy and X-ray diffractometer (XRD) techniques. PET–ZnO nanocomposites have been prepared by solution casting method. The structural and chemical changes occurred in poly (ethylene terephthalate) after inclusion of ZnO nanoparticles have been studied with the help of XRD and Fourier transform infrared spectroscopy, respectively. It was observed from differential scanning calorimeter that ZnO nanoparticles work as nucleating agent for heterogeneous nucleation in PET matrix under non-isothermal crystallization process. The combined Avrami and Ozawa models have been proved adequate to explain non-isothermal crystallization kinetics of PET–ZnO nanocomposites, and also, ZnO nanoparticles have been caused to reduce crystallization activation energy in pristine PET as per the applied Kissinger model.     

Cold crystallization from chiral smectic phase

Cold crystallization of liquid crystalline (S)-4’-(1-methylheptyloxycarbonyl) biphenyl-4-yl 4-[7-(2,2,3,3,4,4,4-heptafluorobutoxy) heptyl-1-oxy]-2-fluorobenzoate (3F7HPhF) was studied in isothermal as well as non-isothermal conditions. For isothermal conditions at temperatures between 233 and 250?K X-ray diffraction and differential scanning calorimetry were used. The crystallization kinetics was described by the Avrami–Avramov model, and the values of Avrami exponent, characteristic time and activation energy were determined. The kinetics of the cold crystallization in non-isothermal conditions for chosen heating rates up to 0.5?K/s was studied by differential scanning calorimetry and analyzed using Ozawa, Mo and Augis–Bennett models. Cold crystallization was found to be three-dimensional and controlled by diffusion both in the isothermal and non-isothermal process, however the activation energy determined in the non-isothermal process is about two times smaller than in the isothermal one.     

Effect of Organoclay Platelets on Crystallization of Polytrimethylene Terephthalate/Polyethylene-octene-g-maleic Anhydride Blends: Isothermal Crystallization

The blends of poly(trimethylene terephthalate) (PTT) with maleic anhydride-grafted poly(ethylene-octene) (POE-g-MA) and organoclay (OMMT) were prepared by melt-blending. The effects of organoclay platelets on the isothermal crystallization behaviors of PTT/POE-g-MA blend were examined using differential scanning calorimetry. The crystallization kinetics of the primary stage under isothermal conditions could be described by the Avrami equation, with values of the Avrami exponent between 2.01 and 2.81 for all samples. The crystallization rate parameter, K, decreased with increase of melt-crystallization temperature for all samples. The activation energies for isothermal crystallization were determined by the Arrhenius equation.     

Synthesis of Poly(butylene terephthalate)/Attapulgite Nanocomposites by In-Situ Polymerization and Its Crystallization Behavior

Poly(butylene terephthalate) (PBT)/attapulgite (AT) nanocomposites were prepared via in-situ polymerization without pre-modification of AT. By this method, PBT chains were successfully grafted onto the surface of AT, which was confirmed by Fourier transform infrared spectroscopy and thermogravimetric analysis. Scanning electron microscope examination indicated the uniform dispersion of AT nanoparticles in PBT matrix. The crystallization behavior of PBT/AT nanocomposites was investigated by X-ray diffraction patterns, differential scanning calorimetry, and step-scan differential scanning calorimetry. The non-isothermal crystallization processes were analyzed with the Avrami, Ozawa, and Mo methods. Crystallization activation energies of the samples were also determined by the Kissinger method. The results indicated that AT could act as a heterogeneous nucleating agent in PBT crystallization and lead to an acceleration of crystallization, while AT also acted as a physical hindrance to retard the transport of polymer chains to the growing crystals.     

Study of the Nonisothermal Crystallization Kinetics and Melting Behaviors of Polypropylene Reinforced with Single-Walled Carbon Nanotubes Nanocomposite

Nonisothermal crystallization kinetics of polypropylene (PP) nanocomposite reinforced with 0.5 wt. % single-walled carbon nanotubes (SWNT) was characterized by differential scanning calorimetry at five different cooling and heating rates. The Avrami, Ozawa, and Seo-Kim kinetic models were used to describe the nonisothermal crystallization of the polymer and its nanocomposite. The addition of nano-filler, in general, improved the crystallization rate and increased the peak crystallization temperature of the nanocomposite as compared to PP. The results show that the Avrami and Seo-Kim models are suitable under different cooling rate conditions but that the Ozawa model is inappropriate for the nanocomposite. Equilibrium melting temperatures, derived from the linear Hoffman-Weeks equation, were shown to decrease in the nanocomposite. Additional analysis was performed based on the Thomson-Gibbs, Lauritzen-Hoffman, and Dobreva-Gutzowa theories, which were applied to take into account the lamellar thickness, nucleating agent, and nucleating activity of the nanocomposite in the nonisothermal melt crystallization process.     

Crystallization Behavior and Crystal Morphology of PTT/PBT Blends

The crystallization behavior and crystal morphology of the poly(trimethyl terephthalate) (PTT)/poly(butylene terephthalate) (PBT) blends were investigated by means of differential scanning calorimetry (DSC), wide angle X‐ray diffraction (WAXD) and polarized light microscopy (PLM) techniques. It was found that the two components crystallized simultaneously in the crystalline regions. The degree of crystallinity changed with PTT content. Crystalline properties were worse when the ratio of PBT and PTT contents was close to 50:50, but were better when PBT content was greatly different from PTT content.     

Nonisothermal Crystallization of Recycled Poly(Ethylene Terephthalate)/Poly(Ethylene Octene) Blends

Recycled poly(ethylene terephthalate) (r-PET) was blended with poly(ethylene octene) (POE) and glycidyl methacrylate grafted poly(ethylene octene) (mPOE). The nonisothermal crystallization behavior of r-PET, r-PET/POE, and r-PET/mPOE blends was investigated using differential scanning calorimetry (DSC). The crystallization peak temperatures (T _p ) of the r-PET/POE and r-PET/mPOE blends were higher than that of r-PET at various cooling rates. Furthermore, the half-time for crystallization (t _1/2 ) decreased in the r-PET/POE and r-PET/mPOE blends, implying the nucleating role of POE and mPOE. The mPOE had lower nucleation activity than POE because the in situ formed copolymer PET-g-POE in the PET/mPOE blend restricted the movement of PET chains. Non-isothermal crystallization kinetics analysis was carried out based on the modified Avrami equation, the Ozawa equation, and the Mo method. It was found that the Mo method provided a better fit for the experimental data for all samples. The effective energy barriers for nonisothermal crystallization of r-PET and its blends were determined by the Kissinger method.     

Kinetics of Isothermal and Nonisothermal Crystallization of Poly(ethylene oxide) (PEO) in PEO/Fatty Acid Blends

In this work, isothermal and nonisothermal crystallization kinetics of poly(ethylene oxide) (PEO) and PEO in PEO/fatty acid (lauric and stearic acid) blends, that are used as thermal energy storage materials, was studied using differential scanning calorimetry (DSC) data. The Avrami equation was adopted to describe isothermal crystallization of PEO and nonisothermal crystallization was analyzed using both the modified Avrami approach and Ozawa method. Avrami exponent (n) for PEO crystallization was in the range 1.08–1.32 (10–90% relative crystallinity), despite of spherulites formation, while for PEO in PEO/fatty acid blends n was between 1.61 and 2.13. Hoffman and Lauritzen theory was applied to calculate the activation energy of nucleation (K_g) – the lowest value of K_g was observed for pure PEO, despite of heterogeneous nucleation of fatty acid crystals in PEO/fatty acid blends. For nonisothermal crystallization of PEO in PEO/lauric acid (1:1 w/w) and PEO/stearic acid (1:3 w/w) blends, secondary crystallization occurred and values of the Avrami exponent were 2.8 and 2.0, respectively. The crystallization activation energies of PEO were determined to be ?260 kJ/mol for pure PEO, ?538 kJ/mol for PEO/lauric acid blend, and ?387 kJ/mol for PEO/stearic acid blend for isothermal crystallization and ?135,6 kJ/mol, ?114,5 kJ/mol, and ?92,8 kJ/mol, respectively, for nonisothermal crystallization.     

Nonisothermal Crystallization Kinetics of Poly(lactic acid) Nucleated with a Multiamide Nucleating Agent

Addition of a commercial available multiamide compound (N,N′,N′′-tricyclohexyl-1,3,5- benzenetricarboxylamide, defined here as TMC) into ecofriendly poly(lactic acid) (PLA) can accelerate the crystallization rate of the material remarkably and broaden its applications. In this paper, the nonisothermal crystallization behavior of biodegradable PLA nucleated by 0.3 wt.% of TMC was investigated by differential scanning calorimetry (DSC). The modified Avrami, Tobin, Ozawa, and Mo models were applied to describe the kinetics of the crystallization process. Various parameters of nonisothermal crystallization, such as the crystallization half-time and crystallization rate constant, reflected that TMC significantly accelerated the crystallization process. The activation energy values of the neat PLA and PLA/TMC blend, determined by the Kissinger method, increased with the addition of TMC. The study should be helpful for understanding the relationship between processing and properties of this material.     

Thermorheology and Crystallization Behaviors of Polyethylenes: Effect of Molecular Attributes

Correlations between polyethylenes of different compositions and branching architectures and the temperature dependence of their viscoelastic behavior as well as the dependence of the nonisothermal crystallization behaviors on the cooling rate were described. To analyze the thermorheological behavior of the various classical polyethylenes, a method proposed by van Gurp and Palmen was utilized and the classical high-pressure low-density polyethylene (LDPE) was found to be thermorheologically complex, while for high-density polyethylene (HDPE) and linear low-density polyethylene (LLDPE), thermorheological simplicity was observed. The Avrami and Mo methods were applied to describe the nonisothermal crystallization kinetics of the different PEs for various cooling rate. The values of the kinetic parameter F(T), kinetic crystallization rate constant (Z_c), and half-time of crystallization (t_1/2) indicated that long-chain branching (LCB) had the role of being a heterogeneous nucleating agent and accelerated the crystallization of polyethylene. Moreover, an HDPE sample of both high molecular weight (M_w) and molecular weight distribution (MWD) had a different crystallization rate dependence from the other samples at various corresponding cooling rates. The crystallization activation energy for nonisothermal crystallization of different PEs was determined using the Kissinger method and showed that the presence of LCB as well as high M_w can increase the crystallization activation energy of polyethylene.     

Non-isothermal crystallization kinetics of alkyl-functionalized graphene oxide/high-density polyethylene nanocomposites

Dodecyl amine-functionalized graphene oxide (DA-GO) was obtained via an amidation reaction. The results of X-ray diffraction and Fourier-transform infrared spectroscopy verified that long alkyl chains of DA were successfully grafted on the GO sheets. Transmission electron microscope and scanning electron microscope techniques illustrated that homogeneously dispersed DA-GO/high-density polyethylene (HDPE) nanocomposites were obtained. The effects of DA-GO on the non-isothermal crystallization of HDPE were then investigated by differential scanning calorimetry (DSC) at various cooling rates (2, 5, 10, and 20?°C/min). Significant increase in the onset crystalline temperature (T_o) and the peak crystallization temperature (T_p) of HDPE incorporating DA-GO indicated the strong nucleating ability of DA-GO. The investigation of half-time crystallization time (t_1/2) demonstrated that crystallization rate of HDPE consisting of DA-GO is faster than that of pure HDPE at a given cooling rate. Ozawa, Avrami, and the combined Avrami–Ozawa methods (Mo) were used for analyzing experimental data. The Mo approach was successful in describing the non-isothermal crystallization process of DA-GO/HDPE nanocomposites. The results indicated that low DA-GO content accelerates the crystallization of HDPE, while higher content hinders the crystallization of HDPE.