Mixed quantum-classical reaction path dynamics of C2H5F --> C2H4 + HF

A mixed quantum-classical method for calculating product energy partitioning based on a reaction path Hamiltonian is presented and applied to HF elimination from fluoroethane. The goal is to describe the effect of the potential energy release on the product energies using a simple model of quantized transverse vibrational modes coupled to a classical reaction path via the path curvature. Calculations of the minimum energy path were done at the B3LYP/6-311++G(2d,2p) and MP2/6-311++G** levels of theory, followed by energy-partitioning dynamics calculations. The results for the final HF vibrational state distribution were found to be in good qualitative agreement with both experimental studies and quasiclassical trajectory simulations.     

Structure of the boronic acid dimer and the relative stabilities of its conformers

Despite the widespread use of boronic acids in materials science and as pharmaceutical agents, many aspects of their structure and reactivity are not well understood. In this research the boronic acid dimer, [HB(OH)(2)](2), was studied by second-order M?ller-Plesset (MP2) perturbation theory and coupled cluster methodology with single and double excitations (CCSD). Pople split-valence 6-31+G*, 6-311G**, and 6-311++G** and Dunning-Woon correlation-consistent cc-pVDZ, aug-cc-pVDZ, cc-pVTZ, and aug-cc-pVTZ basis sets were employed for the calculations. A doubly hydrogen-bonded conformer (1) of the dimer was consistently found to be lowest in energy; the structure of 1 was planar (C(2h)) at most computational levels employed but was significantly nonplanar (C(2)) at the MP2/6-311++G** and CCSD/6-311++G** levels, the result of an intrinsic problem with Pople-type sp-diffuse basis functions on heavy atoms. The dimerization energy, enthalpy, and free energy for the formation of (1) from the exo-endo conformer of the monomer were -10.8, -9.2, and +1.2 kcal/mol, respectively, at the MP2/aug-cc-pVTZ level. Several other hydrogen-bonded conformers of the dimer were local minima on the potential energy surface (PES) and ranged from 2 to 5 kcal/mol higher in energy than 1. Nine doubly OH-bridged conformers, in which the boron atoms were tetracoordinated, were also local minima on the PES, but they were all greater than 13 kcal/mol higher in energy than 1; doubly H-bridged structures proved to be transition states. MP2 and CCSD results were compared to those from the BLYP, B3LYP, OLYP, O3LYP, PBE1PBE, and TPSS functionals with the 6-311++G** and aug-cc-pVTZ basis sets; the PBE1PBE functional performed best relative to the MP2 and CCSD results. Self-consistent reaction field (SCRF) calculations predict that boronic acid dimerization is less favorable in solution than in vacuo.     

The C7-C10 cycloalkanes revisited

The conformers of cycloheptane through cyclodecane have been examined at the B3LYP/6-311+G* and MP2/6-311+G* theoretical levels, with some additional calculations at the CCD/6-311+G* and CCSD(T)/6-311++G** levels. With cyclooctane, B3LYP predicts that the boat-chair and crown conformers have similar energies, whereas MP2 and CCSD(T) predict that the crown conformer is 2 kcal/mol higher in energy. The latter is in agreement with the electron diffraction data. With cyclononane, B3LYP predicts that two of the higher-energy conformers found in molecular mechanics calculations should convert to one of the lower-energy conformers. However, MP2/6-311+G* optimizations find them to be true minima on the potential energy surface. B3LYP systematically predicts larger C-C-C bond angles for these compounds than either MP2 or CCD. The results of molecular mechanics MM4 calculations are generally in good agreement with those obtained using MP2.     

Theoretical study of light-metal tetrahydroborates

Ab initio calculations of the structural, energetic, vibrational, and magnetic characteristics of the lowest-lying structures for isolated molecules and ions of light-metal tetrahydroborates (Li, Na, Be, Mg, and Al) have been performed by the perturbation theory (MP2), quadratic configuration interaction (QCISD(T)), coupled cluster (CCSD(T)), and density functional theory (B3LYP) methods using the 6-31G*, 6-31G**, 6-311+G**, and 6-311++G** basis sets. The trends in the behavior of the structural parameters, the energies of different decomposition pathways, barriers to internal rotation of BH₄ groups, normal mode frequencies, magnetic shielding constants, and spin density distribution (in radicals) have been analyzed in various related series of these compounds. The results obtained by ab initio methods and at the DFT level are compared. The economical approximation B3LYP/6-311++G**//B3LYP/6-311+G** adequately reproduces the results obtained at the higher level of theory CCSD(T)/6-311++G*s*//MP2/6-31G* even though it requires considerably shorter CPU times and smaller amounts of memory.     

Theoretical study of light-metal tetrahydroaluminates

Ab initio calculations of the structural, energetic, vibrational, and magnetic characteristics of the lowest-lying structures for isolated molecules and ions of light-metal tetrahydroaluminates (Li, Na, Be, Mg, and Al) have been performed by the perturbation theory (MP2), quadratic configuration interaction (QCISD(T)), coupled cluster (CCSD(T)), and density functional theory (B3LYP) methods using the 6-31G*, 6-31G**, 6-311+G**, and 6-311++G** basis sets. The trends in the behavior of the molecular characteristics have been analyzed in various related series of these compounds. The results are compared with the data on analogous light-metal tetrahydroborates calculated at the same levels of theory. The differences in structure and stability between analogous hydroborate and alanate complexes are examined. The economical approximation B3LYP/6-311++G**//B3LYP/6-311+G** has been shown to adequately reproduce the results obtained at the higher level of theory CCSD(T)/6-311++G**//MP2/6-31G* even though it requires considerably shorter CPU times and smaller amounts of memory.     

A computational study of intramolecular proton transfer in gaseous protonated glycine

The minimum energy paths for intramolecular proton transfer between the amino nitrogen and carbonyl oxygen atoms in gaseous protonated glycine were estimated at the Hartree-Fock (HF) and second-order M?ller-Plesset Perturbation (MP2) levels of theory. Potential energy profiles and their associated reactant, transition state, and product species calculated at the MP2/6-31G* level were shown to differ significantly from those obtained at the HF/6-31G* level. Effects of electron correlation and basis functions on the calculated geometries and energies of relevant species were examined at the HF, MP2, MP4, CCSD, and B3LYP levels using the 6-31G*, 6-31G**, 6-31+G**, 6-311+G**, 6-31+G(2d,2p), 6-311+G(3df,2p), cc-pVDZ, aug-cc-pVDZ, and cc-pVTZ basis sets. The HF and MP2 optimized levels with the 6-31G*, 6-31G**, 6-31+G**, and 6-311+G** bases were used to calculate the thermodynamic and kinetic properties of the proton transfer reaction at 298.15 K and 1 atm, which include enthalpy, entropy, Gibbs free energy, equilibrium constant, potential energy barriers, tunneling transmission coefficients, and rate constants. Results indicate that the proton in a carbonyl O-protonated glycine undergoes a rapid migration to the amino nitrogen atom, while the reverse process is extremely unfavorable. The objective of this work is to develop practical theoretical procedures for studying proton transfer reactions in amino acids and peptides and to assemble physical data from these model calculations for future references.     

Basis set effects on calculated geometries: 6-311++G** vs. aug-cc-pVDZ

The effect of basis sets on MP2 and CCSD calculated geometries has been investigated for a series of small organic molecules with two to four nonhydrogen atoms. Whereas 6-311++G** usually leads to satisfactory structures, this was not true with aug-cc-pVDZ, although it uses more basis functions than the former set. In addition, the smaller 6-311++G** invariably leads to lower calculated energies than aug-cc-pVDZ. With a given basis set, CCSD gives more satisfactory calculated geometries than MP2, but with a much greater computation time. For the compounds in this report, B3LYP/6-311++G** is quite effective in giving satisfactory calculated geometries at a relatively small computational cost.     

高级量子化学从头计算法研究N2和H2O分子间相互作用

在MP2/6-311++G(3d,3p)电子相关校正水平上,对N₂和H₂O分子间可能存在的氢键复合物进行全自由度能量梯度优化,发现了一个接近于直线的弱氢键总能量极小结构(1),进一步在高级电子相关校正的MP4SDTQ和CCSD(T)水平,用6-311++G(3d,3p)基组加上(3s3p2d1f)键函数,用MP4和CCSD(T)计算的结构1的结合能分别为-5.061kJ/mol和-4.715kJ/mol.     

Conformational analysis of carbonic anhydrase inhibitors using ab initio molecular orbital methods. 1. Rotational isomerism in methane sulfonamide anion, CH3-SO2-NH−

Ab initio calculations have been performed on methane sulfonamide anion. Geometries have been optimized using Hartree-Fock basis sets up to 6-31+G*, and single-point calculations employing those Hartree-Fock geometries have been performed at levels up to MP2/6-311++G**. In addition, geometry optimizations for the 0°, 90°, 150°, and 180° conformers have been carried out at the MP2/6-31G*, MP2/6-31+G*, and MP2/6-311++G** levels. Vibrational frequencies have been calculated using the HF/4-31G*, MP2/6-31G*, and MP2/6-31+G* geometries. All calculations at or above the 4-31G* level agree that H—N—S—C ˜90° is the global minimum. The H—N—S—C = 180° conformer is clearly higher in energy although the relative energy of this conformer varies from 0.36 to 1.03 kcal/mol for the post-HF calculations depending on basis set. The H—N—S—C = 180° conformer appears to be a very shallow local minimum. However, the potential energy surface is quite flat in this region, and the highest-level calculations, including MP2 optimizations and vibrational frequency analysis, are ambiguous on this point. The conformer with an H—N—S—C torsion of 0° is a transition state with a relative energy ˜8 kcal/mol. Received: 3 December 1996 / Accepted: 2 January 1997     

An ab initio and density functional theory study of keto-enol equilibria of hydroxycyclopropenone in gas and aqueous solution phase

Keto-enol tautomerism in hydroxycyclopropenone (2-hydroxy-2-cyclopropen-1-one) has been studied using ab initio methods, the B3LYP functional of density functional theory, as well as complete basis set (CBS-QB3 and CBS-APNO) and G3 methods. Absolute and relative energies were calculated with each of the methods, whereas computations of geometries and harmonic frequencies for hydroxycyclopropenone and 1,2-cyclopropanedione were computed in the gas phase but were limited to HF, MP2 and CCSD levels of theory, and the B3LYP functional, in combination with the 6-31++G** basis set. Using the MP2/6-31++G** gas phase optimized structure, each species was then optimized fully in aqueous solution by employing the polarizable continuum model (PCM) self-consistent reaction field approach, in which HF, MP2 and B3LYP levels of theory were utilized, with the same 6-31++G** basis set. In both gas and aqueous solution phases, the keto form is higher in energy for all of the model chemistries considered. The presence of the solvent, however, is found to have very little effect on the bond lengths, angles and harmonic frequencies. From the B3LYP/6-31++G** Gibbs free energy, the keto-enol tautomeric equilibrium constant for 2-hydroxy-2-cyclopropen-1-one <==> 1,2-cyclopropanedione is computed to be K(T)(gas) = 2.35 x 10(-6), K(T)(aq) = 5.61 x 10(-14). It is concluded that the enol form is overwhelmingly predominant in both environments, with the effect of the solvent shifting the direction of equilibrium even more strongly in the favor of hydroxycyclopropenone. The almost exclusive nature of this species is attributed to stabilization resulting from aromaticity. Confirmation is provided by comparison of the simulated vibrational spectra of hydroxycyclopropenone with the measured infrared spectrum in an argon matrix.     

Halogen switching of azacarbenes C2NH ground states at ab initio and DFT levels

Relative stabilities and singlet–triplet energy differences are calculated for 24 C₂NX azacarbenes (where X is H, F, Cl, and Br). Three skeletal arrangements are employed including azacyclopropenylidene, [(imino)methylene]carbene, and cyanocarbene. Halogens appear to alternate the electronic ground states of C₂NH azacarbenes, from triplet to singlet states, at MP3/6‐311++G**, B1LYP/6‐311++G**, B3LYP/6‐311++G**, MP2/6‐311++G**, MP4(SDTQ)/6‐311++G**, QCISD(T)/6‐311++G**, CCSD(T)/6‐311++G**, CCSD(T)/cc‐pVTZ, G1, and G2 levels of theory. The aromatic characters of singlet cyclic azacyclopropenylidenes are measured using GIAO–NICS calculations. Linear correlations are found between the B3LYP/6‐311++G** calculated LUMO–HOMO energy gaps (ΔE_{HOMO ‐ LUMO}) of the singlet carbenes versus their corresponding singlet–triplet energy separations (ΔE). Electrophilic characters are found for all singlet azacarbenes in their addition reactions to alkenes with the highest electrophilicity being exhibited for X = F. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:377–388, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20442     

Comparison of some representative density functional theory and wave function theory methods for the studies of amino acids

Energies of different conformers of 22 amino acid molecules and their protonated and deprotonated species were calculated by some density functional theory (DFT; SVWN, B3LYP, B3PW91, MPWB1K, BHandHLYP) and wave function theory (WFT; HF, MP2) methods with the 6-311++G(d,p) basis set to obtain the relative conformer energies, vertical electron detachment energies, deprotonation energies, and proton affinities. Taking the CCSD/6-311++G(d,p) results as the references, the performances of the tested DFT and WFT methods for amino acids with various intramolecular hydrogen bonds were determined. The BHandHLYP method was the best overall performer among the tested DFT methods, and its accuracy was even better than that of the more expensive MP2 method. The computational dependencies of the five DFT methods and the HF and MP2 methods on the basis sets were further examined with the 6-31G(d,p), 6-311++G(d,p), aug-cc-pVDZ, 6-311++G(2df,p), and aug-cc-pVTZ basis sets. The differences between the small and large basis set results have decreased quickly for the hybrid generalized gradient approximation (GGA) methods. The basis set convergence of the MP2 results has been, however, very slow. Considering both the cost and the accuracy, the BHandHLYP functional with the 6-311++G(d,p) basis set is the best choice for the amino acid systems that are rich in hydrogen bonds.     

Modern valence-bond description of chemical reaction mechanisms: the 1,3-dipolar addition of diazomethane to ethene

The electronic mechanism for the gas-phase concerted 1,3-dipolar cycloaddition of diazomethane (CH2N2) to ethene (C2H4) is described through spin-coupled (SC) calculations at a sequence of geometries along the intrinsic reaction coordinate obtained at the MP2/6-31G(d) level of theory. It is shown that the bonding rearrangements occurring during the course of this reaction follow a heterolytic pattern, characterized by the movement of three well-identifiable orbital pairs, which are initially responsible for the pi bond in ethene and the C-N pi bond and one of the N-N pi bonds in diazomethane and are retained throughout the entire reaction path from reactants to product. Taken together with our previous SC study of the electronic mechanism of the 1,3-dipolar cycloaddition of fulminic acid (HCNO) to ethyne (C2H2) (Theor. Chim. Acc. 1998, 100, 222), the results of the present work suggest strongly that most gas-phase concerted 1,3-dipolar cycloaddition reactions can be expected to follow a heterolytic mechanism of this type, which does not involve an aromatic transition state. The more conventional aspects of the gas-phase concerted 1,3-dipolar cycloaddition of diazomethane to ethene, including optimized transition structure geometry, electronic activation energy, activation barrier corrected for zero-point energies, standard enthalpy, entropy and Gibbs free energy of activation, have been calculated at the HF/6-31G(d), B3LYP/6-31G(d), MP2/6-31G(d), MP2/6-31G(d,p), QCISD/6-31G(d) and CCD/6-31G(d) levels of theory. We also report the CCD/6-311++G(2d, 2p)//CCD/6-31G(d), MP4(SDTQ)/6-311++G(2d,2p)//CCD/6-31G(d) and CCSD(T)/6-311++G(2d, 2p)//CCD/6-31G(d) electronic activation energies.     

Quantum chemistry study of H+(H2O)8: a global search for its isomers by the scaled hypersphere search method, and its thermal behavior

The structures of the protonated water cluster H+(H2O)8 have been globally explored by the scaled hypersphere search method. On the Hartree-Fock potential energy surface 174 isomers were found, among which 168 were computed to be minima at the B3LYP/6-31+G** level, and their energies were further refined at the level of MP2/6-311++G(3df,2p). The global minimum on the potential energy surface computed at the B3LYP/6-31+G** level shows a cagelike structure with the "Eigen" motif, while the lowest-free-energy isomer has a five-membered-ring structure at 170 K and a chain form at 273 K. The present results are well in line with previous experimental findings. In addition, the ADMP (atom-centered density matrix propagation) simulation indicates that the extra proton in the lowest-free-energy isomer (170 K), which has a five-membered ring and the "Zundel" feature, is often in an asymmetrical hydrogen bond.     

A quantum mechanical approach to the kinetics of the hydrogen abstraction reaction H2O2 + •OH → HO2 + H2O

The kinetics of the hydrogen abstraction from H₂O₂ by ^?OH has been modeled with MP2/6‐31G*//MP2/6‐31G*, MP2‐SAC//MP2/6‐31G*, MP2/6‐31+G**//MP2/6‐31+G**, MP2‐SAC// MP2/6‐31+G**, MP4(SDTQ)/6‐311G**//MP2/6‐31G*, CCSD(T)/6‐31G*//CCSD(T)/6‐31G*, CCSD(T)/6‐31G**//CCSD(T)/6‐31G**, CCSD(T)/6‐311++G**//MP2/6‐31G* in the gas phase. MD simulations have been used to generate initial geometries for the stationary points along the potential energy surface for hydrogen abstraction from H₂O₂. The effective fragment potential (EFP) has been used to optimize the relevant structures in solution. Furthermore, the IEFPCM model has been used for the supermolecules generated via MD calculations. IEFPCM/MP2/6‐31G* and IEFPCM/CCSD(T)/6‐31G* calculations have also been performed for structures without explicit water molecules. Experimentally, the rate constant for hydrogen abstraction by ^?OH drops from 1.75 × 10^?12 cm³ molecule^?1 s^?1 in the gas phase to 4.48 × 10^?14 cm³ molecule^?1 s^?1 in solution. The same trend has been reproduced best with MP4 (SDTQ)/6‐311G**//MP2/6‐31G* in the gas phase (0.415 × 10^?12 cm³ molecule^?1 s^?1) and with EFP (UHF/6‐31G*) in solution (3.23 × 10^?14 cm³ molecule^?1 s^?1). © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 502–514, 2005     

The observed and calculated 1H and 13C chemical shifts of tertiary amines and their N-oxides

A series of model tertiary amines were oxidized in situ in an NMR tube to amine N-oxides and their (1)H and (13)C NMR spectra were recorded. Next, the chemical shifts induced by oxidation (Δδ) were calculated using different GIAO methods investigating the influence of the method [Hartree-Fock (HF), Moeller-Plesset perturbation, density functional theory (DFT)], the functional applied in the DFT (B3LYP, BPW, OPBE, OPW91) and the basis set used [6-31G*, 6-311G**, 6-311 + + G** and 6-311 + + G(3df,3pd)]. The best results were obtained with the HF/6-311 + + G** and OPBE/6-311 + + G** methods. The computation/experiment comparison approach was used for the configuration prediction of chiral amine N-oxides-(R) and (S)-agroclavine-6-N-oxide.     

Theoretical studies of host-guest interaction in gas hydrates

Ab initio calculations and atoms-in-molecules (AIM) analysis have been used to investigate the host-guest interaction in dodecahedral water cages using a variety of guest species that include monatomic (He, Ne, Ar, Kr, and Xe), diatomic (CO, H(2), N(2), O(2), and NO), triatomic (CO(2), NO(2), and O(3)), and polyatomic (CH(4) and NH(3)) molecules. Geometry optimization for the guest species, host cage, and their complexes was carried out using the second order M?ller-Plesset perturbation method with the 6-31G** basis set. Single point energy calculations using the same method but different basis sets (6-31++G**, 6-311++G**, aug-cc-pVDZ, and aug-cc-pVTZ) were carried out for the MP2/6-31G** optimized geometries. The interaction energy between the guest species and the host cage has been obtained in the complete basis set limit by basis set extrapolation.     

Hydrogen peroxide clusters: the role of open book motif in cage and helical structures

Hartree-Fock (HF) calculations using 6-31G*, 6-311++G(d,p), aug-cc-pVDZ, and aug-cc-pVTZ basis sets show that hydrogen peroxide molecular clusters tend to form hydrogen-bonded cyclic and cage structures along the lines expected of a molecule which can act as a proton donor as well as an acceptor. These results are reiterated by density functional theoretic (DFT) calculations with B3LYP parametrization and also by second-order M?ller-Plesset perturbation (MP2) theory using 6-31G* and 6-311++G(d,p) basis sets. Trends in stabilization energies and geometrical parameters obtained at the HF level using 6-311++G(d,p), aug-cc-pVDZ, and aug-cc-pVTZ basis sets are similar to those obtained from HF/6-31G* calculation. In addition, the HF calculations suggest the formation of stable helical structures for larger clusters, provided the neighbors form an open book structure.     

An ab initio correlated study of the potential energy surface for the HOBr.H2O complex

The potential energy surface (PES) for the HOBr.H(2)O complex has been investigated using second- and fourth-order M?ller-Plesset perturbation theory (MP2, MP4) and coupled cluster theory with single and doubles excitations (CCSD), and a perturbative approximation of triple excitations (CCSD-T), correlated ab initio levels of theory employing basis sets of triple zeta quality with polarization and diffuse functions up to the 6-311++G(3dp,3df ) standard Pople's basis set. Six stationary points being three minima, two first-order transition state (TS) structures and one second-order TS were located on the PES. The global minimum syn and the anti equilibrium structure are virtually degenerated [DeltaE(ele-nuc) approximately 0.3 kcal mol(-1), CCSD-T/6-311++G(3df,3pd) value], with the third minima being approximately 4 kcal mol(-1) away. IRC analysis was performed to confirm the correct connectivity of the two first-order TS structures. The CCSD-T/6-311++G(3df,3pd)//MP2/6-311G(d,p) barrier for the syn<-->anti interconversion is 0.3 kcal mol(-1), indicating that a mixture of the syn and anti forms of the HOBr.H(2)O complex is likely to exist.     

Ab initio and DFT energetics of silylenic X–CNSi (X=H, F, Cl, and Br)

Singlet–triplet energy splitting for 24 silylenic reactive intermediates, X–CNSi (where X=H, F, Cl and Br), are compared and contrasted at 11 levels of theory: B1LYP/6-31++G**, B3LYP/6-31++G**, B1LYP/6-311++G**, B3LYP/6-311++G**, MP3/6-31G*, MP3/6-311++G**, MP2/6-31+G**, MP2/6-311++G**, MP4 (SDTQ)/6-311++G**, QCISD(T)/6-311++G** and CCSD(T)/6-311++G**. Each X-substituted silylenic species may either be singlet (s) or triplet (t), with one of the following three structures: 3-X-2-aza-1-silacyclopropenylidene (1_s-X, 1_t-X); [(X-imino)methylene]silylene (2_s-X, 2_t-X); and X-cyanosilylene (3_s-X, 3_t-X). For all X–CNSi species studied, orders of singlet–triplet energy separations (ΔE_s-t,X), appear as a function of electro-negativity (F>Cl>Br>H). For the six H–CNSi isomers (X=H), stability order is: 3_s-H>1_s-H>2_t-H>3_t-H>2_s-H>1_t-H. Likewise, stability order for the six isomers with X=F, is: 3_s-F>3_t-F>1_s-F>1_t-F>2_s-F>2_t-F. For X=Cl, the order of stability is: 3_s-Cl>1_s-Cl>3_t-Cl>2_t-Cl>1_t-Cl>2_t-Cl. Finally, the order of stability for six isomers of Br–CNSi is: 3_s-Br>3_t-Br>1_s-Br>2_s-Br>2_t-Br>1_t-Br. The lowest energy minimum, among all 24 species scrutinized, appears to be the singlet acyclic 3_s-X. Triplet silylene 2_t-H is suggested to be more stable than its corresponding 2_s-H at MP3, MP2 and DFT levels of theory. Comparisons between relative stabilities; multiplicities and geometrical parameters of 1–3 are discussed.