一类线性与框式约束凸规划问题的原始-对偶内点算法

本文对一类具有线性和框式约束的凸规划问题给出了一个原始-对偶内点算法, 该算法可在任一原始-对偶可行内点启动, 并且全局收敛,当初始点靠近中心路径时, 算法成为中心路径跟踪算法。 数值实验表明, 算法对求解大型的这类问题是有效的。     

Solving real-world linear ordering problems using a primal-dual interior point cutting plane method

Cutting plane methods require the solution of a sequence of linear programs, where the solution to one provides a warm start to the next. A cutting plane algorithm for solving the linear ordering problem is described. This algorithm uses the primaldual interior point method to solve the linear programming relaxations. A point which is a good warm start for a simplex-based cutting plane algorithm is generally not a good starting point for an interior point method. Techniques used to improve the warm start include attempting to identify cutting planes early and storing an old feasible point, which is used to help recenter when cutting planes are added. Computational results are described for some real-world problems; the algorithm appears to be competitive with a simplex-based cutting plane algorithm.Research partially supported by ONR Grant number N00014-90-J-1714.     

A constraint shifting homotopy method for general non-linear programming

In this article, a constraint shifting homotopy method (CSHM) is proposed for solving non-linear programming with both equality and inequality constraints. A new homotopy is constructed, and existence and global convergence of a homotopy path determined by it are proven. All problems that can be solved by the combined homotopy interior point method (CHIPM) can also be solved by the proposed method. In contrast to the combined homotopy infeasible interior point method (CHIIPM), it needs a weaker regularity condition. And the starting point in the proposed method is not necessarily a feasible point or an interior point, so it is more convenient to be implemented than CHIPM and CHIIPM. Numerical results show that the proposed algorithm is feasible and effective.     

不等式约束优化一个新型可行QP-free算法

本文对非线性不等式约束优化问题提出了一个新的可行 QP-free 算法. 新算法保存了现有算法的优点, 并具有以下特性: (1) 算法每次迭代只需求解三个具有相同系数矩阵的线性方程组, 计算量小; (2) 可行下降方向只需通过求解一个线性方程组即可获得, 克服了以往分别求解两个线性方程组获得下降方向和可行方向, 然后再做凸组合的困难;(3) 迭代点均为可行点, 并不要求是严格内点; (4) 算法中采用了试探性线搜索,可以进一步减少计算量; (5) 算法中参数很少,数值试验表明算法具有较好的数值效果和较强的稳定性.     

约束优化问题的一类光滑罚算法的全局收敛特性

对约束优化问题给出了一类光滑罚算法.它是基于一类光滑逼近精确罚函数 l_p(p\in(0,1]) 的光滑函数 L_p 而提出的.在非常弱的条件下, 建立了算法的一个摄动定理, 导出了算法的全局收敛性.特别地, 在广义Mangasarian-Fromovitz约束规范假设下, 证明了当 p=1 时, 算法经过有限步迭代后, 所有迭代点都是原问题的可行解; p\in(0,1) 时,算法经过有限迭代后, 所有迭代点都是原问题可行解集的内点.     

Affine scaling algorithm fails for semidefinite programming

In this paper, we introduce an affine scaling algorithm for semidefinite programming (SDP), and give an example of a semidefinite program such that the affine scaling algorithm converges to a non-optimal point. Both our program and its dual have interior feasible solutions and unique optimal solutions which satisfy strict complementarity, and they are non-degenerate everywhere.     

An Interior Point Algorithm for Mixed Complementarity Nonlinear Problems

Nonlinear complementarity and mixed complementarity problems arise in mathematical models describing several applications in Engineering, Economics and different branches of physics. Previously, robust and efficient feasible directions interior point algorithm was presented for nonlinear complementarity problems. In this paper, it is extended to mixed nonlinear complementarity problems. At each iteration, the algorithm finds a feasible direction with respect to the region defined by the inequality conditions, which is also monotonic descent direction for the potential function. Then, an approximate line search along this direction is performed in order to define the next iteration. Global and asymptotic convergence for the algorithm is investigated. The proposed algorithm is tested on several benchmark problems. The results are in good agreement with the asymptotic analysis. Finally, the algorithm is applied to the elastic–plastic torsion problem encountered in the field of Solid Mechanics.     

A variant of Karmarkar's linear programming algorithm for problems in standard form

This paper presents a variant of Karmarkar's linear programming algorithm that works directly with problems expressed in standard form and requires no a priori knowledge of the optimal objective function value. Rather, it uses a variation on Todd and Burrell's approach to compute ever better bounds on the optimal value, and it can be run as a prima-dual algorithm that produces sequences of primal and dual feasible solutions whose objective function values convege to this value. The only restrictive assumption is that the feasible region is bounded with a nonempty interior; compactness of the feasible region can be relaxed to compactness of the (nonempty) set of optimal solutions.     

A globally convergent interior point algorithm for non-convex nonlinear programming

In this paper, a new algorithm for tracing the combined homotopy path of the non-convex nonlinear programming problem is proposed. The algorithm is based on the techniques of β$\beta$-cone neighborhood and a combined homotopy interior point method. The residual control criteria, which ensures that the obtained iterative points are interior points, is given by the condition that ensures the β$\beta$-cone neighborhood to be included in the interior part of the feasible region. The global convergence and polynomial complexity are established under some hypotheses.     

Affine scaling inexact generalized Newton algorithm with interior backtracking technique for solving bound-constrained semismooth equations

We develop and analyze an affine scaling inexact generalized Newton algorithm in association with nonmonotone interior backtracking line technique for solving systems of semismooth equations subject to bounds on variables. By combining inexact affine scaling generalized Newton with interior backtracking line search technique, each iterate switches to inexact generalized Newton backtracking step to strict interior point feasibility. The global convergence results are developed in a very general setting of computing trial steps by the affine scaling generalized Newton-like method that is augmented by an interior backtracking line search technique projection onto the feasible set. Under some reasonable conditions we establish that close to a regular solution the inexact generalized Newton method is shown to converge locally p-order q-superlinearly. We characterize the order of local convergence based on convergence behavior of the quality of the approximate subdifferentials and indicate how to choose an inexact forcing sequence which preserves the rapid convergence of the proposed algorithm. A nonmonotonic criterion should bring about speeding up the convergence progress in some ill-conditioned cases.     

An affine-scaling interior-point CBB method for box-constrained optimization

We develop an affine-scaling algorithm for box-constrained optimization which has the property that each iterate is a scaled cyclic Barzilai–Borwein (CBB) gradient iterate that lies in the interior of the feasible set. Global convergence is established for a nonmonotone line search, while there is local R-linear convergence at a nondegenerate local minimizer where the second-order sufficient optimality conditions are satisfied. Numerical experiments show that the convergence speed is insensitive to problem conditioning. The algorithm is particularly well suited for image restoration problems which arise in positron emission tomography where the cost function can be infinite on the boundary of the feasible set. This material is based upon work supported by the National Science Foundation under Grants 0203270, 0619080, and 0620286.     

An interior affine scaling projective algorithm for nonlinear equality and linear inequality constrained optimization

In this paper, we propose a new nonmonotonic interior point backtracking strategy to modify the reduced projective affine scaling trust region algorithm for solving optimization subject to nonlinear equality and linear inequality constraints. The general full trust region subproblem for solving the nonlinear equality and linear inequality constrained optimization is decomposed to a pair of trust region subproblems in horizontal and vertical subspaces of linearize equality constraints and extended affine scaling equality constraints. The horizontal subproblem in the proposed algorithm is defined by minimizing a quadratic projective reduced Hessian function subject only to an ellipsoidal trust region constraint in a null subspace of the tangential space, while the vertical subproblem is also defined by the least squares subproblem subject only to an ellipsoidal trust region constraint. By introducing the Fletcher's penalty function as the merit function, trust region strategy with interior point backtracking technique will switch to strictly feasible interior point step generated by a component direction of the two trust region subproblems. The global convergence of the proposed algorithm while maintaining fast local convergence rate of the proposed algorithm are established under some reasonable conditions. A nonmonotonic criterion should bring about speeding up the convergence progress in some high nonlinear function conditioned cases.     

半定规划的一个新的宽邻域非可行内点算法

基于一种新的宽邻域,提出一个求解半定规划的新的非可行内点算法．在适当的假设条件下,证明了该算法具有较好的迭代复杂界O（√nL）,优于目前此类算法的最好的复杂性O（n√nL）,等同于可行内点算法．     

自对偶嵌入模型解拓展熵规划

本文把拓展熵规划转化为锥最优化问题,再对该锥最优化问题构造一个锥自对偶嵌入模型,证明了锥自对偶嵌入模型的障碍函数满足自协调性,这保证了用某些内点法求解时算法是多项式时间的.这种方法的另一个优点是不需要寻找初始可行解.     

Globally Convergent Cutting Plane Method for Nonconvex Nonsmooth Minimization

Nowadays, solving nonsmooth (not necessarily differentiable) optimization problems plays a very important role in many areas of industrial applications. Most of the algorithms developed so far deal only with nonsmooth convex functions. In this paper, we propose a new algorithm for solving nonsmooth optimization problems that are not assumed to be convex. The algorithm combines the traditional cutting plane method with some features of bundle methods, and the search direction calculation of feasible direction interior point algorithm (Herskovits, J. Optim. Theory Appl. 99(1):121–146, 1998). The algorithm to be presented generates a sequence of interior points to the epigraph of the objective function. The accumulation points of this sequence are solutions to the original problem. We prove the global convergence of the method for locally Lipschitz continuous functions and give some preliminary results from numerical experiments.     

The Complex Interior-Boundary method for linear and nonlinear programming with linear constraints

In this paper we develop the Complex method; an algorithm for solving linear programming (LP) problems with interior search directions. The Complex Interior-Boundary method (as the name suggests) moves in the interior of the feasible region from one boundary point to another of the feasible region bypassing several extreme points at a time. These directions of movement are guaranteed to improve the objective function. As a result, the Complex method aims to reach the optimal point faster than the Simplex method on large LP programs. The method also extends to nonlinear programming (NLP) with linear constraints as compared to the generalized-reduced gradient.The Complex method is based on a pivoting operation which is computationally efficient operation compared to some interior-point methods. In addition, our algorithm offers more flexibility in choosing the search direction than other pivoting methods (such as reduced gradient methods). The interior direction of movement aims at reducing the number of iterations and running time to obtain the optimal solution of the LP problem compared to the Simplex method. Furthermore, this method is advantageous to Simplex and other convex programs in regard to starting at a Basic Feasible Solution (BFS); i.e. the method has the ability to start at any given feasible solution.Preliminary testing shows that the reduction in the computational effort is promising compared to the Simplex method.     

A primal-dual projection method for solving systems of linear inequalities

An algorithm is described for finding a feasible point for a system of linear inequalities. If the solution set has nonempty interior, termination occurs after a finite number of iterations. The algorithm is a projection-type method, similar to the relaxation methods of Agmon, Motzkin, and Schoenberg. It differs from the previous methods in that it solves for a certain “dual” solution in addition to a primal solution.     

AN INFEASIBLE-INTERIOR-POINT PREDICTOR-CORRECTOR ALGORITHM FOR THE SECOND-ORDER CONE PROGRAM

A globally convergent infeasible-interior-point predictor-corrector algorithm is presented for the second-order cone programming （SOCP） by using the Alizadeh- Haeberly-Overton （AHO） search direction. This algorithm does not require the feasibility of the initial points and iteration points. Under suitable assumptions, it is shown that the algorithm can find an -approximate solution of an SOCP in at most O（√n ln（ε0/ε）） iterations. The iteration-complexity bound of our algorithm is almost the same as the best known bound of feasible interior point algorithms for the SOCP.     

A primal projective interior point method for linear programming

We present a new projective interior point method for linear programming with unknown optimal value. This algorithm requires only that an interior feasible point be provided. It generates a strictly decreasing sequence of objective values and within polynomial time, either determines an optimal solution, or proves that the problem is unbounded. We also analyze the asymptotic convergence rate of our method and discuss its relationship to other polynomial time projective interior point methods and the affine scaling method.This research was supported in part by NSF Grants DMS-85-12277 and CDR-84-21402 and ONR Contract N00014-87-K0214.     

Using Efficient Anchoring Points for Generating Search Directions in Interior Multiobjective Linear Programming

This paper modifies the affine-scaling primal algorithm to multiobjective linear programming (MOLP) problems. The modification is based on generating search directions in the form of projected gradients augmented by search directions pointing toward what we refer to as anchoring points. These anchoring points are located on the boundary of the feasible region and, together with the current, interior, iterate, define a cone in which we make the next step towards a solution of the MOLP problem. These anchoring points can be generated in more than one way. In this paper we present an approach that generates efficient anchoring points where the choice of termination solution available to the decision maker at each iteration consists of a set of efficient solutions. This set of efficient solutions is being updated during the iterative process so that only the most preferred solutions are retained for future considerations. Current MOLP algorithms are simplex-based and make their progress toward the optimal solution by following an exterior trajectory along the vertices of the constraints polytope. Since the proposed algorithm makes its progress through the interior of the constraints polytope, there is no need for vertex information and, therefore, the search for an acceptable solution may prove less sensitive to problem size. We refer to the resulting class of MOLP algorithms that are based on the affine-scaling primal algorithm as affine-scaling interior multiobjective linear programming (ASIMOLP) algorithms.