Atom transfer radical copolymerization of acrylonitrile and ethyl methacrylate at ambient temperature

Copolymerization of acrylonitrile (AN) and ethyl methacrylate (EMA) using copper‐based atom transfer radical polymerization (ATRP) at ambient temperature (30 °C) using various initiators has been investigated with the aim of achieving control over molecular weight distribution. The effect of variation of concentration of the initiator, ligand, catalyst, and temperature on the molecular weight distribution and kinetics were investigated. No polymerization at ambient temperature was observed with N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA) ligand. The rate of polymerization exhibited 0.86 order dependence with respect to 2‐bromopropionitrile (BPN) initiator. The first‐order kinetics was observed using BPN as initiator, while curvature in first‐order kinetic plot was obtained for ethyl 2‐bromoisobutyrate (EBiB) and methyl 2‐bromopropionate (MBP), indicating that termination was taking place. Successful polymerization was also achieved with catalyst concentrations of 25 and 10% relative to initiator without loss of control over polymerization. The optimum [bpy]₀/[CuBr]₀ molar ratio for the copolymerization of AN and EMA through ATRP was found to be 3/1. For three different in‐feed ratios, the variation of copolymer composition (F_AN) with conversion indicated toward the synthesis of copolymers having slight changes in composition with conversion. The high chain‐end functionality of the synthesized AN‐EMA copolymers was verified by further chain extension with methyl acrylate and styrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1975–1984, 2006     

AGET ATRP of acrylonitrile using 1,1,4,7,10,10‐hexamethyltriethylenetetramine as both ligand and reducing agent

Atom transfer radical polymerization using activators generated by electron transfer (AGET ATRP) of acrylonitrile (AN) initiated by ethyl 2‐bromoisobutyrate was approached for the first time using 1,1,4,7,10,10‐hexamethyltriethylenetetramine (HMTETA) and 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as both ligand and reducing agent. AGET ATRP of AN with HMTETA as both ligand and reducing agent was better controlled than with PMDETA as both ligand and reducing agent under the same experimental conditions. With an increase content of HMTETA, the polymerization provided an accelerated reaction rate and a broader polymer molecular weight distribution. The rate of polymerization with DMF as solvent was faster than with acetonitrile, cyclohexanone, toluene, and xylene as solvents. The polymerization apparent activation energy was calculated to be 45.7 kJ mol^?1. The end functionality of polyacrylonitrile (PAN) was confirmed by ¹H NMR spectroscopy. The living feature of PAN was verified by chain extensions of PAN with methyl methacrylate and AN. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 128–133, 2010     

Copper(0)‐mediated radical copolymerization of vinyl acetate and acrylonitrile in DMSO at ambient temperature

In this work, Cu(0)‐mediated radical copolymerization of vinyl acetate (VAc) and acrylonitrile (AN) was explored. The polymerization was carried out at 25°C with 2,2′‐bipyridine as ligand and dimethyl sulfoxide as solvent. The copolymerization proceeded smoothly producing moderately controlled molecular weights at low VAc feed ratios. The high VAc feed ratios generated low polymerization rate and poorly controlled molecular weights. FTIR, ¹H NMR, and differential scanning calorimetry confirmed the successful obtaining of the copolymers. Based on ¹H NMR spectra, the reactivity ratios of VAc and AN were calculated to be 0.003 and 1.605, respectively. This work conveyed the first example for the Cu(0)‐mediated radical polymerization of AN and VAc, wherein VAc cannot be homopolymerized by Cu(0)‐mediated radical polymerization technique. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel polymers based on atom transfer radical polymerization of 2‐methoxyethyl acrylate

Atom transfer radical polymerization (ATRP) has been employed in the polymerization of 2‐methoxyethyl acrylate (MEA) initiated by ethyl 2‐bromoisobutyrate in bulk or in toluene solution at 90–95 °C with the catalytic systems Cu(I)Br/PMDETA or HMTETA. Kinetics investigations revealed that ATRP of MEA proceeds in a controlled manner with a first‐order plot of monomer consumption, an almost linear molecular weight evolution and polydispersities < 1.29 in the entire conversion range. Well‐defined diblock copolymers with PMMA, PMEA‐b‐PMMA have been produced by use of both PMEA and PMMA macroinitiators, however, for the latter the controlled conditions were somehow difficult to maintain. The amphiphilic behavior of the diblock copolymers lead to phase separation resulting in two glass transition temperatures as detected by DSC. Contact angle (Θ) investigations with water on PMEA, PMMA, and diblock copolymers surfaces reveal PMEA as an intermediate hydrophilic with Θ ～ 50°, whereas PMMA and the diblock copolymers all fall in the hydrophobic region with Θ > 70°. © 2006 Wiley Periodicals, Inc. J Polym Sci Part Polym Chem45: 333–340, 2007     

Thiophenol derivatives as a reducing agent for in situ generation of Cu(I) species via electron transfer reaction in copper‐catalyzed living/controlled radical polymerization of styrene

The copper‐catalyzed living radical polymerization (LRP) of styrene (St) was carried out in the presence of thiophenol derivative such as sodium thiophenolate (PhSNa) or p‐methoxythiophenol as a reducing agent for Cu(II) by using either 1‐chloro‐1‐phenyl ethane or ethyl‐2‐bromoisobutyrate as an initiator and N,N,N′,N″,N″‐pentamethyldiethylenetriamine as ligand at 110 °C. Kinetic experiments were carried out to reveal the effect of PhSNa concentration on copper‐catalyzed LRP of St. This technique was successfully applied for the preparation of both chain‐extended polymer and block copolymer polystyrene‐b‐poly(methyl methacrylate). The obtained polymers were characterized using GPC, ¹H‐NMR, and MALDI‐TOF measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5923–5932, 2006     

A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005     

ATRP of MMA in Aqueous Solution in the Presence of an Amphiphilic Polymeric Macroligand

An amphiphilic poly(2‐oxazoline) block copolymer consisting of a water‐soluble poly(2‐methyloxazoline) block and a hydrophobic block bearing bipyridine moieties in the side chain was synthesized by living cationic polymerization. This macroligand was applied to atom‐transfer radical polymerization (ATRP) of methyl methacrylate in aqueous solution in the presence of Cu(I)Br and ethyl 2‐bromoisobutyrate as the initiator. High monomer conversion up to 96% was achieved after 3 h of polymerization at 60°C.     

Well‐controlled amphiphilic block glycopolymers and their molecular recognition with lectins

The atom transfer radical polymerization of an unprotected glycomonomer, 2‐{[(D ‐glucosamin‐2N‐yl)carbonyl]oxy}ethyl methacrylate (HEMAGl) is firstly reported. Controlled polymerizations were performed with the CuBr/N,N,N′,N′,N′‐pentamethyldiethylene triamine catalytic system with ethyl 2‐bromoisobutyrate and 1,2‐bis(bromoisobutyryloxy) ethane as mono and difunctional initiators in DMF solutions (80% w/w) at 40 and 50 °C, respectively. The polymerization of HEMAGl resulted in a controlled polymerization with linear kinetics, molecular weights which increase with conversion and narrow polydispersity indexes. Mono and difunctional PHEMAGl macroinitiators were used to synthesize the amphiphilic di and triblock glycopolymers with n‐butyl acrylate, verifying their living character. The self‐assembly of these glycopolymers in distilled water and in 0.1M NaCl solutions was studied by dynamic light scattering, showing the role of hydrogen bonds and the hydrophobic parts. In addition, their interaction with Concanavalin A lectin was examined, demonstrating the influence of molecular weight and copolymer composition. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3623–3631, 2010     

Iron‐mediated AGET ATRP of methyl methacrylate using metal wire as reducing agent

Methyl methacrylate (MMA) were successfully polymerized by atom transfer radical polymerization with activator generated by electron transfer (AGET ATRP) using copper or iron wire as the reducing agent at 90°C. Well‐controlled polymerizations were demonstrated using an oxidatively stable iron(III) chloride hexahydrate (FeCl₃·6H₂O) as the catalyst, ethyl 2‐bromoisobutyrate (EBiB) as the initiator, and tetrabutylammonium bromide (TBABr) or triphenylphosphine as the ligand. The polymerization rate was fast and affected by the amount of catalyst and type of reducing agents. For example, the polymerization rate of bulk AGET ATRP with a molar ratio of [MMA]₀/[EBiB]₀/[FeCl₃·6H₂O]₀/[TBABr]₀ = 500/1/0.5/1 using iron wire (the conversion reaches up to 82.2% after 80 min) as the reducing agent was faster than that using copper wire (the conversion reaches up to 86.1% after 3 h). At the same time, the experimental M_n values of the obtained poly(methyl methacrylate) were consistent with the corresponding theoretical ones, and the M_w/M_n values were narrow (～1.3), showing the typical features of “living”/controlled radical polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Some novel accelerating agents for nitroxide‐mediated living free‐radical polymerization

Malononitrile (MN), trifluoroacetic acid anhydride, acetylacetone, acetoacetic ester, and diethyl malonate have been identified as novel rate‐accelerating additives for nitroxide‐mediated living free‐radical polymerization. Among these additives, MN has the greatest accelerating effect. Adding MN at an MN/2,2,6,6‐tetramethylpiperidine‐oxyl (TEMPO) molar ratio of 4.0 results in a nearly 20 times higher rate of polymerization of styrene (St), and adding MN at an MN/TEMPO molar ratio of 2.5 results in a nearly 15 times higher rate of copolymerization of St and methyl methacrylate. The polymerization of St proceeds in a living fashion, as indicated by the increase in the molecular weight with time and conversion and the relatively low polydispersity. The polymerization rate of St is so quick that the conversion reaches 70% within 1 h at 125 °C when the molar ratio of MN to TEMPO is 4:1. Moreover, the reaction temperature can be reduced to 110 °C. A possible explanation for this effect is that the formation of hydrogen bonds between the MN and TEMPO moiety weakens the C? ON bond at the end of the polymer chain. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5246–5256, 2005     

A comparative analysis of SET‐LRP of MA in solvents mediating different degrees of disproportionation of Cu(I)Br

Cu(I)Br/Me₆‐TREN species are unstable and disproportionate into metallic Cu(0) and Cu(II)Br₂/Me₆‐TREN in DMSO, whereas in toluene are stable and do not undergo disproportionation, at least at 25 °C. To estimate the role of the disproportionating solvent in single electron‐transfer living radical polymerization (SET‐LRP) a comparative analysis of Cu(0)/Me₆‐TREN‐catalyzed polymerization of MA initiated with methyl 2‐bromopropionate at 25 °C was performed in DMSO and toluene. A combination of kinetic experiments and chain end analysis by 500‐MHz ¹H NMR spectroscopy was used to demonstrate that disproportionation represents the crucial requirement for a successful SET‐LRP of MA at 25 °C. In DMSO a perfect SET‐LRP occurs and yields close to 100% conversion in 45 min. A first order polymerization in growing species up to 100% conversion and a PMA with perfectly functional chain ends are obtained. However, in toluene within 17 h only about 60% conversion is obtained, the polymerization does not show first order in growing species and therefore is not a living polymerization. Moreover, at 60% conversion the resulting PMA has only 80% active chain ends. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6880–6895, 2008     

Solvent effect on the atom transfer radical polymerization of allyl methacrylate

The controlled radical polymerization of allyl methacrylate by atom transfer radical polymerization was carried out in solution at 70 °C, with ethyl 2‐bromoisobutyrate as the initiator and copper halide (CuX, where X is Cl or Br) with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst system. Kinetic analyses demonstrated that all the homopolymerization reactions showed a general behavior characterized by two clearly differentiated stages. Thus, in the early stage, the conversion increased continually with the time, independently of the solvent employed. In the second stage, a deceleration process took place, and a limit conversion was achieved, depending on the polarity and amount of the solvent used. The dependence of both the gel formation and limit conversion, as well as the molecular characteristics of poly(allyl methacrylate)s formed with different experimental parameters, such as the initial monomer concentration, the solvent employed, and the type of halide used as a catalyst, was also examined. The prepared polymers were characterized by size exclusion chromatography, Fourier transform infrared, and one‐ and two‐dimensional nuclear magnetic resonance spectroscopy. Moreover, chain‐growth experiments with butyl acrylate as the comonomer proved the living character of the poly(allyl methacrylate)s obtained, with these used as macroinitiators. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6247–6261, 2005     

Synthesis of well‐defined syndiotactic poly(methyl methacrylate) with low‐temperature atom transfer radical polymerization in fluoroalcohol

The copper‐mediated atom transfer radical polymerization of methyl methacrylate (MMA) in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was studied to simultaneously control the molecular weight and tacticity. The polymerization using tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as a ligand was performed even at ?78°C with a number‐average molecular weight (M_n) of 13,400 and a polydispersity (weight‐average molecular weight/number‐average molecular weight) of 1.31, although the measured M_n's were much higher than the theoretical ones. The addition of copper(II) bromide (CuBr₂) apparently affected the early stage of the polymerization; that is, the polymerization could proceed in a controlled manner under the condition of [MMA]₀/[methyl α‐bromoisobutyrate]₀/[CuBr]₀/[CuBr₂]₀/[Me₆TREN]₀ = 200/1/1/0.2/1.2 at ?20°C with an MMA/HFIP ratio of 1/4 (v/v). For the field desorption mass spectrum of Cu^IBr/Me₆TREN in HFIP, there were [Cu(Me₆TREN)Br]⁺ and [Cu(Me₆TREN)OCH(CF₃)₂]⁺, indicating that HFIP should coordinate to the Cu^I/Me₆TREN complex. The syndiotacticity of the obtained poly(methyl methacrylate)s increased with the decreasing polymerization temperature; the racemo content was 84% for ?78°C, 77% for ?30°C, 75% for ?20°C, and 63% for 30°C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1436–1446, 2006     

Atom transfer radical polymerization of cyclohexyl methacrylate at a low temperature

The atom transfer radical polymerization of cyclohexyl methacrylate (CHMA) is reported. Controlled polymerizations were performed with the CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine catalytic system with ethyl 2‐bromoisobutyrate as the initiator in bulk and different solvents (25 vol %) at 40 °C. The polymerization of CHMA in bulk resulted in a controlled polymerization, although the concentration of active species was relatively elevated. The addition of a solvent was necessary to reduce the polymerization rate, which was dependent on the dipole moment. Well‐controlled polymers were obtained in toluene, diphenyl ether, and benzonitrile solutions. Poly(cyclohexyl methacrylate) as a macroinitiator was used to synthesize the poly(cyclohexyl methacrylate)‐b‐poly(tert‐butyl methacrylate) block copolymer, which allowed a demonstration of its living character. In addition, two difunctional initiators, 1,4‐bis(bromoisobutyryloxy) benzene and 1,2‐bis(bromoisobutyryloxy) ethane, were used to initiate the atom transfer radical polymerization of CHMA. The experimental molecular weights of the obtained polymers were very close to the theoretical ones. These, along with the relative narrow molecular weight distributions, indicated that the polymerization was living and controlled. For confirmation, two different poly(tert‐butyl methacrylate)‐b‐poly(cyclohexyl methacrylate)‐b‐poly(tert‐butyl methacrylate) triblock copolymers were also synthesized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 71–77, 2005     

Single electron transfer‐living radical polymerization of methyl methacrylate in fluoroalcohol: Dual control over molecular weight and tacticity

The Cu(0)‐mediated single electron transfer‐living radical polymerization (SET‐LRP) of methyl methacrylate (MMA) using ethyl 2‐bromoisobutyrate (EBiB) as an initiator with Cu(0)/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine as a catalyst system in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was studied. The polymerization showed some living features: the measured number‐average molecular weight (M_n,GPC) increased with monomer conversion and produced polymers with relatively low polydispersities. The increase of HFIP concentration improved the controllability over the polymerization with increased initiation efficiency and lowered polydispersity values. ¹H NMR, MALDI‐TOF‐MS spectra, and chain extension reaction confirmed that the resultant polymer was end‐capped by EBiB species, and the polymer can be reactivated for chain extension. In contrast, in the cases of dimethyl sulfoxide or N,N‐dimethylformamide as reaction solvent, the polymerizations were uncontrolled. The different effects of the solvents on the polymerization indicated that the mechanism of SET‐LRP differed from that of atom transfer radical polymerization. Moreover, HFIP also facilitated the polymerization with control over stereoregularity of the polymers. Higher concentration of HFIP and lower reaction temperature produced higher syndiotactic ratio. The syndiotactic ratio can be reached to about 0.77 at 1/1.5 (v/v) of MMA/HFIP at ?18 °C. In conclusion, using HFIP as SET‐LRP solvent, the dual control over the molecular weight and tacticity of PMMA was realized. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6316–6327, 2009     

Synthesis of poly(methyl methacrylate)‐b‐polystyrene containing a crown ether unit at the junction point via combination of atom transfer radical polymerization and nitroxide mediated radical polymerization routes

Poly(methyl methacrylate)‐b‐polystyrene (PMMA‐b‐PS) containing a benzo‐15‐crown‐5 unit at the junction point was prepared by combining atom transfer radical polymerization and nitroxide‐mediated radical polymerization. For this purpose, 6,7,9,10,12,13,15,16‐octahydro‐5,8,11,14,17‐pentaoxa‐benzocyclopentadecene‐2‐carboxylic acid 3‐(2‐bromo‐2‐methyl‐propionyloxy)‐2‐methyl‐2‐[2‐phenyl‐2‐(2,2,6,6‐tetramethyl‐piperidin‐1‐yloxy)‐ethoxycarbonyl]‐propyl ester ( 3 ) was synthesized and used as an initiator in atom transfer radical polymerization of methyl methacrylate in the presence of CuCl and pentamethyldiethylenetriamine at 60°C. A linear behavior was observed in both plots of ln([M]₀/[M]) versus time and M_n,_GPC versus conversion indicating that the polymerization proceeded in a controlled/living manner. Thus obtained PMMA precursor was used as a macroinitiator in nitroxide‐mediated radical polymerization of styrene (St) at 125°C to give well‐defined PMMA‐b‐PS with crown ether per chain. Kinetic data were also obtained for copolymerization. Moreover, potassium picrate (K⁺ picrate) complexation of 3 and PMMA‐b‐PS copolymer was studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3242–3249, 2006     

ATRP of MMA under 60Co γ‐irradiation at room temperature

In this work, atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was successfully carried out at room temperature (25 °C) under ⁶⁰Co γ‐irradiation environment. The polymerization proceeded smoothly with high conversion (>90%) within 7 h. The polymerizations kept the features of controlled radical polymerization: first‐order kinetics, well‐predetermined number‐average molecular weights (M_n,GPC), and narrow molecular weight distributions (M_w/M_n < 1.25). ¹H NMR spectroscope and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry confirmed that poly(methyl methacrylate) (PMMA) chain was end‐capped by the initiator moieties. The Cu(II) concentration could reduce to 20 ppm level while keeping good control over molecular weights. This is the first successful example for the ATRP of MMA under ⁶⁰Co γ‐irradiation at room temperature. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Conventional radical polymerization and iodine‐transfer polymerization of 4′‐nonafluorobutyl styrene: Surface and thermal characterizations of the resulting poly(fluorostyrene)s

4′‐Nonafluorobutylstyrene (3) was synthesized and polymerized by conventional and controlled radical polymerization (iodine transfer polymerization (ITP)). Such an aromatic fluoromonomer was prepared from Ullmann coupling between 1‐iodoperfluorobutane and 4‐bromoacetophenone followed by a reduction and a dehydration in 50% overall yield. Two radical polymerizations of (3) were initiated by AIBN either under conventional or controlled conditions, with 1‐iodoperfluorohexane in 84% monomer conversion and in 50% yield. ITP of (3) featured a fast monomer conversion and a linear evolution of the ln([M]₀/[M]) versus time. The kinetics of radical homopolymerization of (3) enabled one to assess its square of the propagation rate to the termination rate (k_p²/k_t) in ITP conditions (36.2·10^?2 l·mol^?2·sec^?2 at 80 °C) from the Tobolsky's kinetic law. Polydispersity index (?) of the fluoropolymer achieved by conventional polymerization was 1.30 while it worthed 1.15 when synthesized by ITP. Thermal stabilities of these oligomers were satisfactory (10% weight loss under air occurred from 305 °C) whereas the melting point was 47 °C. Contact angles and surface energies assessed from spin‐coated poly(3) films obtained by conventional (hysteresis = 18°, surface energy 18 mN.m^?1) and ITP (hysteresis = 47°, surface energy 15 mN.m^?1) evidenced ? values' influence onto surface properties of the synthesized polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3202–3212     

Molecular weight control of polyacrylamide with sodium formate as a chain‐transfer agent: Characterization via size exclusion chromatography/multi‐angle laser light scattering and determination of chain‐transfer constant

We discuss the synthesis and characterization of polyacrylamide (PAM) homopolymers with carefully controlled molecular weights (MWs). PAM was synthesized via free‐radical solution polymerization under conditions that yield highly linear polymer with minimal levels of hydrolysis. The MW of the PAM homopolymers was controlled by the addition of sodium formate (NaOOCH) to the polymerization medium as a conventional chain‐transfer agent. MWs and polydispersity indices (PDIs) were determined via size exclusion chromatography/multi‐angle laser light scattering analysis; for polymerizations carried out to high conversion, PAM MWs ranged from 0.23 to 6.19 × 10⁶ g/mol, with most samples having PDI ≈2.0. Zero‐shear intrinsic viscosities of the polymers were determined via low‐shear viscometry in 0.514 M NaCl at 25 °C. Data derived from the polymer characterization were used to determine the chain‐transfer constant to NaOOCH under the given polymerization conditions and to calculate Mark–Houwink–Sakurada K and a values for PAM in 0.514 M NaCl at 25 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 560–568, 2003     

AGET ATRP of water‐soluble PEGMA: Fast living radical polymerization mediated by iron catalyst

In this work, living radical polymerizations of a water‐soluble monomer poly(ethylene glycol) monomethyl ether methacylate (PEGMA) in bulk with low‐toxic iron catalyst system, including iron chloride hexahydrate and triphenylphosphine, were carried out successfully. Effect of reaction temperature and catalyst concentration on the polymerization of PEGMA was investigated. The polymerization kinetics showed the features of “living”/controlled radical polymerization. For example, M_n,GPC values of the resultant polymers increased linearly with monomer conversion. A faster polymerization of PEGMA could be obtained in the presence of a reducing agent Fe(0) wire or ascorbic acid. In the case of Fe(0) wire as the reducing agent, a monomer conversion of 80% was obtained in 80 min of reaction time at 90 °C, yielding a water‐soluble poly(PEGMA) with M_n = 65,500 g mol^?1 and M_w/M_n = 1.39. The features of “living”/controlled radical polymerization of PEGMA were verified by analysis of chain‐end and chain‐extension experiments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012