Effect of an aliphatic spacer group on the adsorption mechanism on the colloidal silver surface of L‐proline phosphonodipeptides

A comparative study of molecular structures of five L ‐proline (L ‐Pro) phosphonodipeptides: L ‐Pro‐NH‐C(Me,Me)‐PO₃H₂ (P1), L ‐Pro‐NH‐C(Me,iPr)‐PO₃H₂ (P2), L ‐Pro‐L ‐NH‐CH(iBu)‐PO₃H₂ (P3), L ‐Pro‐L ‐NH‐CH(PA)‐PO₃H₂ (P4) and L ‐Pro‐L ‐NH‐CH(BA)‐PO₃H₂ (P5) has been carried out using Raman and absorption infrared techniques of molecular spectroscopy. The interpretation of the obtained spectra has been supported by density functional theory calculations (DFT) at the B3LYP; 6–31 + + G** level using Gaussian 2003 software. The surface‐enhanced Raman scattering (SERS) on Ag‐sol in aqueous solutions of these phosphonopeptides has also been investigated. The surface geometry of these molecules on a silver colloidal surface has been determined by observing the position and relative intensity changes of the Pro ring, amide, phosphonate and so‐called spacer (−R) groups vibrations of the enhanced bands in their SERS spectra. Results show that P4 and P5 adsorb onto the silver as anionic molecules mainly via the amide bond (∼1630, ∼1533, ∼1248, ∼800 and ∼565 cm⁻¹), Pro ring (∼956, ∼907 and ∼876 cm⁻¹) and carboxylate group (∼1395 and ∼909 cm⁻¹). Coadsorption of the imine nitrogen atom and PO group with the silver surface, possibly by formation of a weaker interaction with the metal, is also suggested by the enhancement of the bands at 1158 and 1248 cm⁻¹. P1, P2 and P3 show two orientations of their main chain on the silver surface resulting from different interactions of the  C CH₃,  NH and  CONH fragments with this surface. Bonding to the Ag surface occurs mainly through the imino atom (1166 cm⁻¹) for P2, while for P1 and P3 it occurs via the methyl group(s) (1194–1208 cm⁻¹). The amide group functionality (CONH) is practically not involved in the adsorption process for P1 and P2, whereas the C_s P bonds do assist in the adsorption. Copyright © 2008 John Wiley & Sons, Ltd.     

Proline and hydroxyproline deposited on silver nanoparticles. A Raman,SERS and theoretical study

The Raman and surface‐enhanced Raman scattering (SERS) spectra of l ‐proline (Pro) and trans‐4‐hydroxy‐ l ‐proline (Hyp) were recorded. SERS spectra were obtained on colloidal Ag prepared by reduction with hydroxylamine. Allowing sufficient time for Pro and Hyp to adjust in the colloidal solution resulted fundamentally in obtaining unique and reproducible SERS spectra. Hyp stabilizes on the surface more rapidly than Pro. The spectral analysis indicates that Pro interacts with the Ag surface through the carboxylate group. The interaction of Hyp with the metal surface occurs through the amino, methylene and carboxylate moieties of the molecule. The spectroscopic results are supported by quantum chemical calculations, performed using extended Hückel theory (EHT) of the title compounds interacting with an Ag cluster model. The assignment of the Raman bands was supported by a normal coordinate analysis performed through Becke, three‐parameter, Lee–Yang–Parr/6‐311 G* + calculations. Copyright © 2011 John Wiley & Sons, Ltd.     

Silver‐bacterial cellulosic sponges as active SERS substrates

Synthetic Ag‐bacterial cellulose nanocomposites are reported here and their performance as surface enhanced Raman scattering (SERS) substrates was investigated using thiosalicylic acid and 2,2′‐dithiodipyridine as analytes. These nanocomposite materials act as natural sponges when immersed in aqueous or ethanolic solutions allowing capture and SERS detection of certain dissolved molecules. The detection limits for the above organic analytes reached concentrations as low as 10⁻⁴ mol·dm⁻³ and are considerably lower than the conventional vegetable cellulose analogs. Furthermore, we anticipate that the use of these nanocomposites has a beneficial consequence for the development of handy and active cellulosic SERS substrates, in particular for bioanalysis, as we experimentally demonstrated by testing the amino acids L ‐phenylalanine, L ‐glutamin and L ‐histidine. Copyright © 2008 John Wiley & Sons, Ltd.     

Characterization of sodium alginate and its block fractions by surface‐enhanced Raman spectroscopy

The surface‐enhanced Raman scattering (SERS) of sodium alginates and their hetero‐ and homopolymeric fractions obtained from four seaweeds of the Chilean coast was studied. Alginic acid is a copolymer of β‐D ‐mannuronic acid (M) and α‐L guluronic acid (G), linked 1 → 4, forming two homopolymeric fractions (MM and GG) and a heteropolymeric fraction (MG). The SERS spectra were registered on silver colloid with the 632.8 nm line of a He Ne laser. The SERS spectra of sodium alginate and the polyguluronate fraction present various carboxylate bands which are probably due to the coexistence of different molecular conformations. SERS allows to differentiate the hetero‐ and homopolymeric fractions of alginic acid by characteristic bands. In the fingerprint region, all the poly‐D ‐mannuronate samples present a band around 946 cm⁻¹ assigned to C O stretching, and C C H and C O H deformation vibrations, a band at 863 cm⁻¹ assigned to deformation vibration of β‐C₁ H group, and one at 799–788 cm⁻¹ due to the contributions of various vibration modes. Poly‐L ‐guluronate spectra show three characteristic bands, at 928–913 cm⁻¹ assigned to symmetric stretching vibration of C O C group, at 890–889 cm⁻¹ due to C C H, skeletal C C, and C O vibrations, and at 797 cm⁻¹ assigned to α C₁ H deformation vibration. The heteropolymeric fractions present two characteristic bands in the region with the more important one being an intense band at 730 cm⁻¹ due to ring breathing vibration mode. Copyright © 2009 John Wiley & Sons, Ltd.     

Single‐molecule surface‐enhanced Raman scattering of fullerene C60

We achieved single‐molecule surface‐enhanced Raman scattering (SM‐SERS) spectra from ultralow concentrations (10⁻¹⁵ M) of fullerene C₆₀ on uniformly assembled Au nanoparticles. It was found that resonant excitation at 785 nm is a powerful tool to probe SM‐SERS in this system. The appearance of additional bands and splitting of some vibrational modes were observed because of the symmetry reduction of the adsorbed molecule and a relaxation in the surface selection rules. Time‐evolved spectral fluctuation and ‘hot spot’ dependence in the SM‐SERS spectra were demonstrated to result from the single‐molecule Raman behavior of the spherical C₆₀ on Au nanoparticles. Copyright © 2010 John Wiley & Sons, Ltd.     

Visible light response of silver 4‐aminobenzenethiolate and silver 4‐dimethylaminobenzenethiolate probed by Raman scattering spectroscopy

Silver thiolate is a layered compound with a Raman spectrum that is known to change with time, becoming the same as the surface‐enhanced Raman scattering (SERS) spectrum of the parent thiol molecule adsorbed on Ag nanoparticles. On this basis, the Raman scattering characteristics of silver 4‐aminobenzenethiolate (Ag‐4ABT) compounds were investigated to determine whether certain peaks that are identifiable in the SERS spectrum of 4‐aminobenzenethiol (4‐ABT) but absent in its normal Raman spectrum were also apparent in the Ag salt spectrum. For comparative purposes, the Raman scattering characteristics of silver 4‐dimethylaminobenzenethiolate (Ag‐4MABT) were also examined. Raman spectra acquired while spinning the sample were typified by only a₁‐type vibrational bands of Ag‐4ABT and Ag‐4MABT, whereas in the static condition, several non‐a₁‐type bands were identified. The spectral patterns acquired in the static condition were similar to the intrinsic SERS spectra of 4‐ABT or 4‐dimethylaminobenzenethiol (4‐MABT) adsorbed on pure Ag nanoparticles. Notably, the CH₃ group vibrational bands were observable for Ag‐4MABT irrespective of the sample rotation. In addition, no decrease in intensity during irradiation with a visible laser was observed for any of the bands, suggesting that no chemical conversion actually took place in either 4‐ABT or 4‐MABT. The preponderance of evidence led to the conclusion that the non‐a₁‐type bands observable in the SERS spectra must be associated with the chemical enhancement mechanism acting on the Ag nanoparticles. The chemical enhancement effect was more profound at 514.5 nm than at 632.8 nm, and was more favorable for 4‐ABT than 4‐MABT at both wavelengths. Copyright © 2012 John Wiley & Sons, Ltd.     

Experimental and theoretical Raman and surface‐enhanced Raman scattering study of cysteine

Raman spectra in solid and 1 M solution of L ‐cysteine and surface‐enhanced Raman scattering (SERS) spectra of this molecule in the zwitterionic form, by using colloidal silver nanoparticles, have been recorded. Density functional theory with the B3LYP functional was used for the optimizations of the ground state geometries and simulation of the vibrational spectrum of this amino acid. The SERS spectrum with a large silver cluster as a model metallic surface was simulated for the first time. Taking into account the experimental and calculated Raman and SERS vibrations and the corresponding assignments, as well as a comparison of force constants and geometrical parameters between the free zwitterion cysteine and the one in the presence of the colloidal silver nanoparticles, we can confirm the presence of gauche (P_H) and trans (P_N) rotamers in the solid state, the formation of a S S bond in the solution state, the dissociation of the peptide bond and mixing of rotamers because of the SERS effect, and the relative importance of the interaction of sulphyldryl, NH₃⁺, and carboxylate groups with the metallic surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Vibrational spectra and crystal structure of the di‐amino acid peptide cyclo(L‐Met‐L‐Met): comparison of experimental data and DFT calculations

Experimental Raman and FT‐IR spectra of solid‐state non‐deuterated and N‐deuterated samples of cyclo(L ‐Met‐L ‐Met) are reported and discussed. The Raman and FT‐IR results show characteristic amide I vibrations (Raman: 1649 cm⁻¹, infrared: 1675 cm⁻¹) for molecules exhibiting a cis amide conformation. A Raman band, assigned to the cis amide II vibrational mode, is observed at ∼1493 cm⁻¹ but no IR band is observed in this region. Cyclo(L ‐Met‐L ‐Met) crystallises in the triclinic space group P1 with one molecule per unit cell. The overall shape of the diketopiperazine (DKP) ring displays a (slightly distorted) boat conformation. The crystal packing employs two strong hydrogen bonds, which traverse the entire crystal via translational repeats. B3‐LYP/cc‐pVDZ calculations of the structure of the molecule predict a boat conformation for the DKP ring, in agreement with the experimentally determined X‐ray structure. Copyright © 2009 John Wiley & Sons, Ltd.     

Comparison of adsorption mechanism on colloidal silver surface of alafosfalin and its analogs

This study reports the Raman (FT‐RS) and absorption infrared (FT‐IR) spectra, based on calculated wavenumbers and normal modes of vibrations, of the following compounds: L ‐Ala‐L ‐NH‐CH(Me)‐PO₃H₂ (alafosfalin, A1), L ‐Ala‐D ‐NH‐CH(Me)‐PO₃H₂ (A2), L ‐Ala‐L ‐NH‐CH(Et)‐PO₃H₂ (A3), D ,L ‐Ala‐D,L ‐NH‐CH(Et)‐PO₃H₂ (A4), L ‐Ala‐D ‐NH‐CH(iPr)‐PO₃H₂ (A5), L ‐Ala‐D,L ‐NH‐CH(iPr)‐PO₃H₂ (A6), L ‐Ala‐D,L ‐NH‐CH(tBu)‐PO₃H₂ (A7), L ‐Ala‐D,L ‐NH‐CH(iBu)‐PO₃H₂ (A8), L ‐Ala‐D,L ‐NH‐CH(cBu)‐PO₃H₂ (A9), L ‐Ala‐D,L ‐NH‐CH(nPA)‐PO₃H₂ (A10), β‐Ala‐D ‐NH‐CH(Me)‐PO₃H₂ (A11), and D,L ‐Ala‐NH‐C(Me,Me)‐PO₃H₂ (A12). The equilibrium geometries and vibrational wavenumbers are calculated using density functional theory (DFT) at the B3LYP; 6–31 + + G** level of theory using Gaussian'03, GaussSum 0.8, and GAR2PED software. We briefly compare and analyze the experimental and calculated vibrational wavenumbers in the range of 3600–400 cm⁻¹. In addition, Raman wavenumbers are compared to those from surface‐enhanced Raman scattering (SERS) for the phosphonodipeptides of alanine (Ala) adsorbed on a colloidal silver surface. The geometry of these molecules etched on the silver surface is deduce from the observed changes in both the intensity and breadth of Raman bands in the spectra of the bound vs free species. For example, A7, A8, A1, A3, and A4 appear to adsorb onto the colloidal silver particles mainly through the phosphonate terminus, and for A3 and A4, through the  C‐NH₂ and  CONH fragments. The most dominant SERS bands of A5, A6, A9, A10, and A11 are due to the amide bond vibrations, as well as to the vibrations of the  C‐NH₂ group (A9 and A10) and the C C group (A6 and A11). The differences recorded for the A5, A6, A9, A10, and A11 and those of A2 and A12 are due to interactions between the amine and methyl groups with the silver surface, and they reflect vibrational characteristic of these groups. Copyright © 2008 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering (SERS) and complementary techniques applied for the investigation of an Italian cultural heritage canvas

A cultural heritage canvas from the early 19^th century, painted by the Vaccaro brothers for the church of Niscemi, province of Caltanissetta, Sicily, was analyzed using Fourier transform (FT)‐Raman, attenuated total reflectance‐FT‐infrared and surface enhanced Raman scattering (SERS) spectroscopy. The painting, still used in religious rites related to the Easter mass (‘la calata da tila’), depicts the scene of the Crucifixion and is executed in a scarce palette, with white, green and blue colors. Analysing vibrational data in conjunction with scanning electron microscopy and solid ‐state ¹³C‐NMR signals of the linen threads, we were able to offer valuable insight into the painting technique, unknown prior to this study. SERS is usually employed in artwork diagnosis for the identification of organic lakes and dyes. Due to its sensitivity, SERS has been successfully applied for the detection of either organic painting materials (indigo) that are usually not resolved by conventional Raman spectroscopy or of inorganic pigments difficult to observe in the presence of highly fluorescent aged organic supports or binders. To the best of our knowledge, this is also the first report on the SERS investigation of flax used in linen from cultural heritage objects using Ag colloidal nanoparticles. Copyright © 2012 John Wiley & Sons, Ltd.     

IR/Raman spectroscopy and DFT calculations of cyclic di‐amino acid peptides. Part III: comparison of solid state and solution structures of cyclo(L‐Ser‐L‐Ser)

B3‐LYP/cc‐pVDZ calculations of the gas‐phase structure and vibrational spectra of the isolated molecule cyclo(L ‐Ser‐L ‐Ser), a cyclic di‐amino acid peptide (CDAP), were carried out by assuming C₂ symmetry. It is predicted that the minimum‐energy structure is a boat conformation for the diketopiperazine (DKP) ring with both L ‐seryl side chains being folded slightly above the ring. An additional structure of higher energy (15.16 kJ mol⁻¹) has been calculated for a DKP ring with a planar geometry, although in this case two fundamental vibrations have been calculated with imaginary wavenumbers. The reported X‐ray crystallographic structure of cyclo(L ‐Ser‐L ‐Ser), shows that the DKP ring displays a near‐planar conformation, with both the two L ‐seryl side chains being folded above the ring. It is hypothesized that the crystal packing forces constrain the DKP ring in a planar conformation and it is probable that the lower energy boat conformation may prevail in the aqueous environment. Raman scattering and Fourier‐transform infrared (FT‐IR) spectra of solid state and aqueous solution samples of cyclo(L ‐Ser‐L ‐Ser) are reported and discussed. Vibrational band assignments have been made on the basis of comparisons with the calculated vibrational spectra and band wavenumber shifts upon deuteration of labile protons. The experimental Raman and IR results for solid‐state samples show characteristic amide I vibrations which are split (Raman: 1661 and 1687 cm⁻¹, IR: 1666 and 1680 cm⁻¹), possibly due to interactions between molecules in a crystallographic unit cell. The cis amide I band is differentiated by its deuterium shift of ∼30 cm⁻¹, which is larger than that previously reported for trans amide I deuterium shifts. A cis amide II mode has been assigned to a Raman band located at 1520 cm⁻¹. The occurrence of this cis amide II mode at a wavenumber above 1500 cm⁻¹ concurs with results of previously examined CDAP molecules with low molecular weight substituents on the C^α atoms, and is also indicative of a relatively unstrained DKP ring. Copyright © 2009 John Wiley & Sons, Ltd.     

Food additives characterization by infrared,Raman, and surface‐enhanced Raman spectroscopies

Fourier‐transform infrared (FT‐IR), Raman (RS), and surface‐enhanced Raman scattering (SERS) spectra of β‐hydroxy‐β‐methylobutanoic acid (HMB), L ‐carnitine, and N‐methylglycocyamine (creatine) have been measured. The SERS spectra have been taken from species adsorbed on a colloidal silver surface. The respective FT‐IR and RS band assignments (solid‐state samples) based on the literature data have been proposed. The strongest absorptions in the FT‐IR spectrum of creatine are observed at 1398, 1615, and 1699 cm⁻¹, which are due to ν_s(COOH) + ν(CN) + δ(CN), ρ_s(NH₂), and ν(C O) modes, respectively, whereas those of L ‐carnitine (at 1396/1586 cm⁻¹ and 1480 cm⁻¹) and HMB (at 1405/1555/1585 cm⁻¹ and 1437–1473 cm⁻¹) are associated with carboxyl and methyl/methylene group vibrations, respectively. On the other hand, the strongest bands in the RS spectrum of HMB observed at 748/1442/1462 cm⁻¹ and 1408 cm⁻¹ are due to methyl/methylene deformations and carboxyl group vibrations, respectively. The strongest Raman band of creatine at 831 cm⁻¹ (ρ_w(R NH₂)) is accompanied by two weaker bands at 1054 and 1397 cm⁻¹ due to ν(CN) + ν(R NH₂) and ν_s(COOH) + ν(CN) + δ(CN) modes, respectively. In the case of L ‐carnitine, its RS spectrum is dominated by bands at 772 and 1461 cm⁻¹ assigned to ρ_r(CH₂) and δ(CH₃), respectively. The analysis of the SERS spectra shows that HMB interacts with the silver surface mainly through the  COO⁻, hydroxyl, and  CH₂ groups, whereas L ‐carnitine binds to the surface via  COO⁻ and  N⁺(CH₃)₃ which is rarely enhanced at pH = 8.3. On the other hand, it seems that creatine binds weakly to the silver surface mainly by  NH₂, and C O from the  COO⁻ group. Copyright © 2006 John Wiley & Sons, Ltd.     

pH‐sensing nanostar probe using surface‐enhanced Raman scattering (SERS): theoretical and experimental studies

Local pH environment has been considered to be a potential biomarker for tumor diagnosis because solid tumors contain highly acidic environments. A pH‐sensing nanoprobe based on surface‐enhanced Raman scattering (SERS) using nanostars under near‐infrared excitation has been developed for potential biomedical applications. To theoretically investigate the effect of protonation state on SERS spectra of p‐mercaptobenzoic acid (pMBA), we used the density functional theory (DFT) with the B3LYP functional to calculate Raman vibrational spectra of pMBA‐Au/Ag complex in both protonated and deprotonated states. Vibrational spectral bands were assigned with DFT calculation and used to investigate SERS spectral changes observed from experiment when varying pH value between five and nine. The SERS peak position of pMBA at ~1580 cm⁻¹ was identified to be a novel pH‐sensing index, which has small but noticeable downshift with pH increase. This phenomenon is confirmed and well‐explained with theoretical simulation. The study demonstrates that SERS is a sensitive tool to monitor minor structural changes due to local pH environment, and DFT calculations can be used to investigate Raman spectra changes associated with minor differences in molecular structure. Copyright © 2013 John Wiley & Sons, Ltd.     

Silver‐decorated carbon nanotube networks as SERS substrates

We report on investigations upon a surface‐enhanced Raman scattering (SERS) substrate produced from a two‐dimensional single‐walled carbon nanotube (SWNT) network decorated with Ag nanoparticles. Using the strong and unique Raman spectrum of SWNTs as a reference, the SWNT/Ag nanostructure can be considered to provide two regions: one with an ultrasensitive SERS response for single‐molecule SERS (SMSERS) study; and another with uniform SERS enhancement over an area of several square millimeters for general SERS measurements. We report the appearance of an anomalous Raman feature at around 2180 cm⁻¹ in the high‐sensitivity region which exhibits the characteristics of SMSERS. The SERS performance of the uniform area was characterized using pyridine vapor adsorbed onto the substrate. The presence of the SWNT/Ag nanostructure enhanced the Raman intensity by over seven orders of magnitude, a factor comparable to or exceeding that obtained on SERS substrates reported by other groups. The results indicate great potential to produce highly sensitive, uniform SERS substrates via further fine‐tuning of the nanostructure. Copyright © 2011 John Wiley & Sons, Ltd.     

Application of calixarene to high active surface‐enhanced Raman scattering (SERS) substrates suitable for in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater

The characteristics of the sol–gel matrix embedding Ag nanoparticles functionalized with 25,27‐dimercaptoacetic acid‐26,28‐dihydroxy‐4‐tert‐butylcalix[4]arene (DMCX) suitable for the in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater is presented. The DMCX‐functionalized silver nanoparticles were produced by the thermal reduction method in xerogel film. The silver colloid blocks were formed in the sol–gel matrix, with a diameter ranging from 50 to 120 nm. DMCX forming the monolayer on the silver nanoparticle surface contributes to the surface‐enhanced Raman scattering (SERS) activity due to the aggregation of silver nanoparticles and the preconcentration of PAH molecules within the zone of electromagnetic enhancement. When selected, PAH molecules e.g. pyrene and naphthalene were adsorbed onto the SERS substrate; Raman band positions of PAH were slightly shifted. A calibration procedure reveals that this type of SERS substrate has a limit of detection of 3 × 10⁻¹⁰ mol/l for pyrene and 13 × 10⁻⁹ mol/l for naphthalene in artificial seawater. The Raman signal response on a pyrene concentration change in artificial seawater was evaluated using a 671‐nm Raman setup with a flow‐through cell. This type of SERS substrate will be suitable for the in situ trace detection of pollutant chemicals in seawater. Copyright © 2012 John Wiley & Sons, Ltd.     

Comparison of SERRS and RRS excitation profiles of [Fe(tpy)2]2+ (tpy = 2,2':6',2'‐terpyridine) supported by DFT calculations: effect of the electrostatic bonding to chloride‐modified Ag nanoparticles on its vibrational and electronic structure

Nonresonance (or normal) Raman scattering (NRS), resonance Raman scattering (RRS), surface‐enhanced Raman scattering (SERS), and surface‐enhanced RRS (SERRS) spectra of [Fe(tpy)₂]²⁺ complex dication (tpy = 2,2':6',2''‐terpyridine) are reported. The comparison of RRS/NRS and SERRS/SERS excitation profiles of [Fe(tpy)₂]²⁺ spectral bands in the range of 445–780 nm is supported by density functional theory (DFT) calculations, Raman depolarization measurements, comparison of the solid [Fe(tpy)₂](SO₄)₂ and solution RRS spectra, and characterization of the Ag nanoparticle (NP) hydrosol/[Fe(tpy)₂]²⁺ SERS/SERRS active system by surface plasmon extinction spectrum and transmission electron microscopy image of the fractal aggregates (D = 1.82). By DFT calculations, both the Raman active modes and the electronic states of the complex have been assigned to the symmetry species of the D_2d point group. It has been demonstrated that upon the electrostatic bonding of the complex dication to the chloride‐modified Ag NPs, the geometric and ground state electronic structure of the complex and the identity of the three different metal‐to‐ligand charge transfer (¹MLCT) electronic transitions remain preserved. On the other hand, the effect of ion pairing manifests itself by a slight change in localization of one of the electronic transitions (with max. at 552 nm) as well as by promotion of the Herzberg–Teller activation of E modes resulting from coupling of E and B₂ excited electronic states. Finally, the very low, 1 × 10⁻¹¹ M SERRS spectral detection limit of [Fe(tpy)₂]²⁺ at 532‐nm excitation is attributed to a concerted action of the electromagnetic and molecular resonance mechanism, in conjunction to the electrostatic bonding of the complex dication to the chloride‐modified Ag NP surface. Copyright © 2014 John Wiley & Sons, Ltd.     

Identification of berberine in ancient and historical textiles by surface‐enhanced Raman scattering

The highly fluorescent natural dye berberine can be easily identified in microscopic textile samples by surface‐enhanced Raman spectroscopy employing citrate‐reduced Ag colloid. The ordinary Raman (OR) and SERS spectra of berberine are presented and discussed in the light of a DFT calculation. Using FT‐Raman and FT‐SERS we could reliably compare relative intensity shifts and investigate the adsorption geometry of berberine on Ag nanoparticles. The significant enhancement in the FT‐SERS spectrum of the out‐of‐plane ring system bending deformation mode at 729 cm⁻¹ relative to a group of in‐plane vibrations at around 1500 cm⁻¹ was interpreted as evidence of a ‘flat‐on’ adsorption geometry. SERS was successfully used to identify berberine in silk fiber samples coated with colloidal Ag following a pretreatment with HCl vapor. The SERS method allowed us to detect berberine in a microscopic sample of a single silk fiber from a severely degraded and soiled 17th Century Chinese textile fragment. Copyright © 2007 John Wiley & Sons, Ltd.     

Vibrational spectroscopic studies of the structure of di‐amino acid peptides. Part II: cyclo(L‐Asp‐L‐Asp) in the solid state and in aqueous solution

Solid‐state protonated and N,O‐deuterated Fourier transform infrared (IR) and Raman scattering spectra together with the protonated and deuterated Raman spectra in aqueous solution of the cyclic di‐amino acid peptide cyclo(L ‐Asp‐L ‐Asp) are reported. Vibrational band assignments have been made on the basis of comparisons with previously cited literature values for diketopiperazine (DKP) derivatives and normal coordinate analyses for both the protonated and deuterated species based upon DFT calculations at the B3‐LYP/cc‐pVDZ level of the isolated molecule in the gas phase. The calculated minimum energy structure for cyclo(L ‐Asp‐L ‐Asp), assuming C₂ symmetry, predicts a boat conformation for the DKP ring with both the two L ‐aspartyl side chains being folded slightly above the ring. The CO stretching vibrations have been assigned for the side‐chain carboxylic acid group (e.g. at 1693 and 1670 cm⁻¹ in the Raman spectrum) and the cis amide I bands (e.g. at 1660 cm⁻¹ in the Raman spectrum). The presence of two bands for the carboxylic acid CO stretching modes in the solid‐state Raman spectrum can be accounted for by factor group splitting of the two nonequivalent molecules in a crystallographic unit cell. The cis amide II band is observed at 1489 cm⁻¹ in the solid‐state Raman spectrum, which is in agreement with results for cyclic di‐amino acid peptide molecules examined previously in the solid state, where the DKP ring adopts a boat conformation. Additionally, it also appears that as the molecular mass of the substituent on the C^α atom is increased, the amide II band wavenumber decreases to below 1500 cm⁻¹; this may be a consequence of increased strain on the DKP ring. The cis amide II Raman band is characterized by its relatively small deuterium shift (29 cm⁻¹), which indicates that this band has a smaller N H bending contribution than the trans amide II vibrational band observed for linear peptides. Copyright © 2009 John Wiley & Sons, Ltd.     

SERS study of Ag nanoparticles electrodeposited on patterned TiO2 nanotube films

In this work, Ag nanoparticles (NPs) were deposited on patterned TiO₂ nanotube films through pulse‐current (PC) electrodeposition, and as a result patterned Ag NPs films were achieved. Scanning electron microscopy (SEM), electron probe microanalysis (EPMA), and X‐ray diffraction (XRD) were used, respectively, to study the morphology, uniformity, and phase structure of the patterned Ag NP films. The size and density of the as‐deposited Ag NPs could be controlled by changing the deposition charge density, and it was found that the patterned Ag NP films produced under a charge density of 2.0 C cm⁻² gave intense UV–vis and Raman peaks. Two‐dimensional surface‐enhanced Raman scattering (SERS) mapping of rhodamine 6G (R6G) on the patterned Ag NP films demonstrated a high‐throughput, localized molecular adsorption and micropatterned SERS effect. Copyright © 2010 John Wiley & Sons, Ltd.     

Potential‐induced Raman behavior of individual (R)‐di‐2‐naphthylprolinol molecules on a Ag‐modified Ag electrode

The applicability of surface‐enhanced Raman spectroscopy is demonstrated to probe the adsorption behavior of individual molecules on a Ag electrode. High‐quality SERS spectra of (R)‐di‐2‐naphthylprolinol (DNP) were obtained from ultradilute solutions (10⁻¹² M ) on the Ag‐nanoparticle‐modified Ag electrode, which is attributed to the high electromagnetic (EM) effect of the SERS‐active system as well as to the strong adsorption and interaction of DNP molecules with Ag. The stable SERS spectra present remarkable potential dependence, which gives evidence for the behavior of individual DNP molecules on the Ag surface. Based on statistical analysis for the probability of DNP molecules located in ‘hot spots’, we propose an SERS mechanism for individual molecules in the electrode system, in combination with the hot‐spot model and orientation of the probe molecules. Copyright © 2010 John Wiley & Sons, Ltd.