光子晶体定向耦合三波长功分器

以二维三角晶格光子晶体为研究对象,在该光子晶体中引入两行以一行耦合介质柱为间距的平行单模线缺陷波导.通过分析和研究光子晶体波导耦合结构的耦合和解耦合特性,发现在不同频率下耦合波导的耦合长度不同.利用平面波展开法和定向耦合原理计算了在不同入射光频率下,缺陷波导间耦合波导的耦合长度,设计了一种新型超微光子晶体波导耦合型三波长功分器,实现了归一化频率分别为0.369、0.394、0.435的光波的分束效果.采用时域有限差分法验证了该功分器具有很好的功率分配效果.本文结果有助于光子晶体新型滤波器、定向耦合器、波分复用器、偏振光分束器以及光开关等光子器件的研究.     

Efficient photonic crystal directional couplers

We demonstrate highly efficient and spectrally flat broadband coupling in photonic crystal directional couplers. The result is obtained by use of a novel design with smaller holes between coparallel photonic crystal waveguides for efficient channel-to-channel coupling. The system studied is based on a planar hexagonal photonic crystal lattice of holes made in silicon-on-insulator material. Results from three-dimensional finite-difference time domain modeling are shown to closely match results measured on fabricated samples.     

Numerical characterization of nanopillar photonic crystal waveguides and directional couplers

We numerically characterize a novel type of a photonic crystal waveguide, which consists of several rows of periodically arranged dielectric cylinders. In such a nanopillar photonic crystal waveguide, light confinement is due to the total internal reflection. A nanopillar waveguide is a multimode waveguide, where the number of modes is equal to the number of rows building the waveguide. The strong coupling between individual waveguides leads to the proposal of an ultrashort directional coupler based on nanopillar waveguides. We present a systematic analysis of the dispersion and transmission efficiency of nanopillar photonic crystal waveguides and directional couplers. Plane wave expansion and finite difference time domain methods were used to characterize numerically nanopillar photonic crystal structures both in two- and three-dimensional spaces.     

平行光子晶体波导的传输特性及应用

采用时域有限差分法研究两平行光子晶体波导的传输特性及模场分布,利用耦合模理论计算光子晶体波导的耦合系数。计算结果表明,在不同的频率范围内两平行光子晶体波导之间表现出不同的耦合特性:在高频段(0.32~0.44)(ωa/2πc)的范围内两直波导表现出相互的能量交换,实现光耦合,耦合系数随入射波 频率增加而减小;而在低频段(0.29~0.32)(ωa/2πc)的范围内,两波导的传输谱图几乎重合。最后,提出一种采用固定波导耦合长度同时实现光分束及光均分器的方案,当耦合长度取34a时,可将频率为0.333 (ωa/2πc)和 0.357(ωa/2πc)的两入射波分束传播,同时将低频段中的任意频率波进行能量均分。     

Photonic crystal waveguide directional couplers as wavelength selective optical filters

Waveguide directional couplers, formed by two closely spaced linear defect waveguides in a two-dimensional photonic crystal of air holes in a semiconductor matrix, are numerically studied using plane wave expansion and finite difference time domain methods. The coupling lengths are on a wavelength scale and show a strong wavelength dependence, allowing for the design of compact wavelength selective optical filters. Applications as a channel interleaver for the 1.55 μm wavelength range and as a micrometer sized 1.31/1.55 μm wavelength demultiplexer are presented.     

A three-channels WDM based on MMI in photonic crystal

A photonic crystal waveguide coupling structure can be constructed by putting three adjacent photonic crystal waveguides in parallel. Guided mode propagation method is employed to analyze the interference behavior of the approximate solution in such a coupling and the self-image phenomenon in multi-mode waveguides. A three-channel multimode interference wavelength division multiplexing can be obtained. The presented device has a high transmission rate as well as the advantage of multi-wavelength selection, thus it may have a potentially practical application in future photonic integrated circuit.     

Adiabatic coupling between conventional dielectric waveguides and waveguides with discrete translational symmetry

We study adiabatic transformation in optical waveguides with discrete translational symmetry. We calculate the reflection and transmission coefficient for a structure consisting of a slab waveguide that is adiabatically transformed into a photonic crystal waveguide and then back into a slab waveguide. The calculation yields high transmission over a wide frequency range of the photonic crystal waveguide band and indicates efficient coupling between the slab waveguide and the photonic crystal waveguide. Other applications of adiabatic mode transformation in photonic crystal waveguides and the coupled-resonator optical waveguides are also discussed.     

光子晶体异质结耦合波导光开关

以二维三角晶格光子晶体为研究对象,在该光子晶体中引入两行平行的单模线缺陷波导,以一行耦合介质柱为间距,通过调节部分耦合介质柱的折射率,构筑了光子晶体异质结耦合波导光开关结构。利用平面波展开法和定向耦合原理计算了在不同入射光频率下,缺陷波导间耦合介质柱的折射率不同时的耦合长度,确定了合适的光子晶体异质结耦合波导光开关的结构参数。利用时域有限差分法研究了该光开关中耦合介质柱的折射率变化及异质结构介质柱的位置分布对光信号输出路径的影响。结果表明,通过改变该结构中耦合介质柱的折射率可以改变光的输出路径,可实现光的开关行为。并且异质结构介质柱位置的随机分布对该光开关的影响不大,有助于光子晶体新型滤波器、定向耦合器、波分复用器以及光开关等光子器件的研究。     

Efficient omnidirectional couplers achieved by anisotropic photonic crystal waveguides

Photonic crystals (PCs) have many potential applications because of their ability to control light-wave propagation. We have investigated omnidirectional couplers in two-dimensional anisotropic PC structures. The anisotropic PC coupler composed of an anisotropic-dielectric cylinder in air is studied by solving Maxwell's equations using the plane wave expansion method and finite-difference time-domain method. The photonic band structures are found to exhibit absolute bandgaps for the square lattices. Numerical simulations show that the incident light-waves at both transverse electric and transverse magnetic modes have efficient coupling in anisotropic PC coupler with square lattices. The guided modes and coupling length are analyzed by considering various line defect anisotropic PC waveguides and interaction regions of couplers. Such a mechanism of omnidirectional coupling should open up a new application for designing components in photonic integrated circuits.     

三平行光子晶体单模波导的耦合特性及其应用

将三光子晶体单模波导的相互耦合看成一个多模干涉系统.本征模的色散曲线相交或近于相交并出现简并模，简并模之间存在强烈耦合并导致模式的分布方式发生转变.多模干涉系统中，不同波长的光波能量在传输过程中由于相干而具有不同的空间输出行为，在近简并点处多模之间的相干解除，能流限制在原输入方向，不发生转移.三光子晶体单模光波导的这种特性可用来制作波分复用或解复用器件. 关键词： 光子晶体波导 简并模 多模干涉 波分复用或解复用     

Semi-Analytical Simulation of Titanium-Indiffused Lithium Niobate-Integrated Optic Directional Couplers Consisting of Curved Waveguides

Integrated optic directional couplers consisting of curved waveguides are simulated analytically by solving the Riccati equation. The coupling coefficient between the curved waveguides with a parabolically varying gap and the condition of total power transfer between the waveguides are derived. In order to compute the overall coupling coefficient and hence the power distribution along the waveguides for Ti:LiNbO₃ curved waveguide directional couplers, the coupling coefficient for straight waveguide couplers is computed for different gaps using the effective-index-based matrix method (EIMM). Finally, the power distribution in the curved waveguides along the length is computed. The method is mostly analytical except the effective-index method and is computationally simple.     

二维光子晶体平行多波导的传输光谱研究

采用时域有限差分法研究二维光子晶体两平行直波导以及三平行直波导的传输特性。计算结果表明,两平行波导在不同的频率范围内表现出不同的耦合特性：在高频段两波导表现出相互的能量交换,实现光耦合,而在低频段传输谱图重合,各波导传输光强均为入射光强的二分之一;对于三波导系统,发现在不同的频率范围内主波导与两耦合波导之间也表现出不同的耦合特性：在高频段两耦合波导与主波导实现光耦合,而在低频段两耦合波导与主波导的传输谱图同步变化,耦合波导的传输光强均约为入射光强的四分之一。     

基于波导间能量耦合效应的光子晶体频段选择与能量分束器

基于波导间能量耦合效应的光子晶体功率分束器具有结构紧凑、带宽较宽、弯曲损耗低、分光角度大和不受外界电磁场干扰等优点.本文利用时域有限差分方法,理论研究了二维三角晶格光子晶体耦合波导的功率分束特性,设计得出了一种能够在宽频谱范围内针对不同频率区间实现不同分光比的功能器件.在此基础上通过改变耦合区介质柱形状以及输出分支波导与能量耦合波导的连接位置,最终针对三个相邻频率范围内的入射光信号,较好地实现了三均分、二均分、单一输出通道这3种能量分配输出模式.该功能器件具有透过率对比度高、结构紧凑等特性,对于发展全光功能器件在大规模全光复杂集成领域内的实际应用具有一定的促进作用.     

Semi-Analytical Simulation of Titanium-Indiffused Lithium Niobate–Integrated Optic Directional Couplers Consisting of Curved Waveguides

Integrated optic directional couplers consisting of curved waveguides are simulated analytically by solving the Riccati equation. The coupling coefficient between the curved waveguides with a parabolically varying gap and the condition of total power transfer between the waveguides are derived. In order to compute the overall coupling coefficient and hence the power distribution along the waveguides for Ti:LiNbO ₃ curved waveguide directional couplers, the coupling coefficient for straight waveguide couplers is computed for different gaps using the effective-index-based matrix method (EIMM). Finally, the power distribution in the curved waveguides along the length is computed. The method is mostly analytical except the effective-index method and is computationally simple.     

Coupling into slow-mode photonic crystal waveguides

We study efficient injectors for coupling light from z-invariant ridge waveguides into slow Bloch modes of single-row defect photonic crystal waveguides. Two-dimensional vectorial computations performed with a Bloch mode theory approach predict that very high efficiencies (>90%) can be achieved for injector lengths of only a few wavelengths in length, even for small group velocities in the range of c/100-c/400. This result suggests that photonic crystal devices operating with slow waves can be interfaced with classical waveguides without sacrificing compactness.     

Photonic crystal waveguides and their applicationsInvited Paper

Two-dimensional (2D) slab photonic crystal waveguides (PCWGs) on silicon-on-insulator (SOI) wafer were designed and fabricated. Full photonic band gap, band gap guided mode, and index guided mode were observed by measuring the transmission spectra. Mini-stop-bands in the PCWG were simulated with different structure parameters. Coupling characteristics of PCWG were investigated theoretically considering the imperfections during the fabrication process. It was found that suppressing power reservation effect can realize both short coupling length and high coupling efficiency.     

二维光子晶体波导与单模平面介质波导间的喇叭波导接头

提出并优化了用于二维介质柱光子晶体波导与单模平面介质波导对接的基于分布布拉格反射波导的喇叭波导接头，提高了这两种波导之间的传输效率.二维时域有限差分仿真结果表明，在大部分光子晶体波导导模的频谱范围内，传输效率高于98％.传输效率最高可以达到99.85％. 关键词： 光子晶体波导 平面介质波导 时域有限差分     

Analysis and design of efficient coupling in photonic crystal circuits

A rigorous analysis and design of efficient coupling from photonic crystal (PhC) waveguides into conventional dielectric waveguides is reported. Closed-form expressions for the reflection and transmission matrices that completely characterize the scattering that occurs at the interface are derived based on an eigenmode expansion technique and a Bloch basis. Analytic expressions are used to analyze the reflection into PhC waveguides. We obtain that negligible reflection can be achieved by choosing a certain interface within a PhC unit cell. Furthermore, analytic expressions are used to design a novel and compact coupler structure in order to achieve high coupling efficiency when broad dielectric waveguides are considered. Thereby, transmission efficiencies near 100 from the fundamental guided Bloch mode into the fundamental waveguide mode are achieved.     

Parallel microgenetic algorithm design for photonic crystal and waveguide structures

We have developed a powerful parallel genetic algorithm design tool for photonic crystal and waveguide structures. The tool employs a small-population-size genetic algorithm (microgenetic algorithm) for global optimization and a two-dimensional finite-difference time-domain method to rigorously design and optimize the performance of photonic devices. We discuss the implementation and performance of this design tool. We demonstrate its application to two photonic devices, a defect taper coupler to connect conventional waveguides and photonic crystal waveguides, and a sharp 90 degrees waveguide bend for low index contrast waveguides.     

Properties of a 1 × 4 optical power splitter made of photonic crystal waveguides

Optical power splitters made of photonic crystal waveguides are believed to become essential components for compact photonic integrated circuits used in fiber optic networks. We design a 1 × 4 optical power splitter made of linear-defect waveguides in photonic crystals, and analyze its properties using the finite-difference time-domain method. Our simulation results show that the transmission properties vary with wave frequency and branch geometry, and that an incident wave is divided equally into four output ports. To reduce the reflections at the three branching regions in the 1 × 4 splitter, we place the defects of extra rods in the branching region, and achieve high transmission in each output waveguide.