Hybrid Long-Period Fiber Grating with Multimode Fiber Core for Refractive Index Measurement

A refractive index(RI) sensor based on hybrid long-period fiber grating(LPFG) with multimode fiber core(MMFC) is proposed and demonstrated. The surrounding RI can be determined by monitoring the separation between the resonant wavelengths of the LPFG and MMFC since the resonant wavelengths of the LPFC and MMFC will shift in opposite directions when the surrounding RI changes. Fxperimental results show that the sensor possesses an enhanced sensitivity of 526.92 nm/RIU in the RI range of 1.387-1.394 RIU. The response to the temperature is also discussed.     

Fiber refractometer based on a fiber Bragg grating and single-mode-multimode-single-mode fiber structure

A refractive index (RI) sensor based on a novel fiber structure that consists of a single-mode-multimode-single-mode (SMS) fiber structure followed by a fiber Bragg grating was demonstrated. The multimode fiber in the SMS structure excites cladding modes within output single-mode fiber (SMF) and recouple the reflected cladding Bragg wavelength to the input SMF core. By measuring the relative Bragg wavelength shift between core and cladding Bragg wavelengths, the RI can be determined. Experimentally we have achieved a maximum sensitivity of 7.33 nm/RIU (RI unit) at RI range from 1.324 to 1.439.     

基于啁啾布喇格光栅的液位传感器

设计了一种基于啁啾光纤布喇格光栅的新型液位传感器,该传感器主要由矩形悬臂梁构成的传感机构和光纤光谱仪组成。导出了啁啾光纤布喇格光栅的反射谱带宽与液位的关系;通过光谱仪检测啁啾光纤布拉格光栅反射谱的带宽,就可以得到被测液位的高度。并对设计的传感器系统进行了实验验证,实验结果表明,该啁啾光纤布拉格光栅反射谱带宽对温度变化不敏感,且在测量范围内,反射谱带宽与被测液位间有很好的线性关系。     

微纳光纤布拉格光栅折射率传感特性研究

利用光纤布拉格光栅方程和光纤基模有效折射率随纤芯半径和环境折射率的函数关系, 建立了微纳光纤布拉格光栅(MNFBG)反射波长随环境折射率变化的数学模型, 给出了波长灵敏度函数, 并指出MNFBG反射波长的变化规律决定于有效折射率随纤芯半径和环境折射率变化的关系. 详细探究了有效折射率及其灵敏度的变化规律, 结果表明: 有效折射率随纤芯半径和环境折射率的减小而非线性减小, 其对环境折射率变化的灵敏度随环境折射率的增大而非线性增加, 而且随纤芯半径减小, 有效折射率的灵敏度、线性度以及线性响应范围均呈递增规律. 通过对纤芯半径为0.5 μm的MNFBG在1.20–1.30和1.33–1.43 环境折射率范围内的波长响应关系拟合, 分别获得了477.33 nm/RIU和856.30 nm/RIU的波长灵敏度以及99.58 %和99.7%的高线性度, 论证了分析结论以及折射率区间划分测量方案的正确性, 为MNFBG折射率传感器的设计、优化以及应用提供了参考依据. 关键词： 微纳光纤 光纤布拉格光栅 折射率传感 数值模拟     

Refractive index sensor based on stress-induced long period grating

We proposed a novel refractive index sensor based on a side-polishing fiber to be cascaded with a stress-induced long period fiber grating (LPG), which is created by applying a force to a V-grooved plate on the single mode fiber with micro-bending deformation. When the refractive index (RI) surrounding the side-polishing surface is changed, the LPG-induced cladding mode light could be coupled back to the core mode, so that it will result in the magnitude variation of LPG loss-peak. This property of index sensing based on the stress-induced LPG by monitoring the power-level change may be exploited in chemical sensing and environmental monitoring applications.     

倾斜光纤光栅溶液折射率传感器的实验研究

根据倾斜光纤光栅(TFBG)和表面镀金的TFBG传感器测量折射率的基本原理,通过OptiGrating软件模拟了不同浓度溶液下TFBG的透射谱和芯层模与某阶包层模耦合引起的谐振峰,初步得出了TFBG各阶包层模随着外界折射率的增大而向右偏移、在一定的传感范围内中心波长与外界折射率呈线性关系的结论。用小型离子溅射仪对TFBG镀45 nm厚度左右的金膜,并用扫描电镜在微观上观察镀膜效果。通过不同浓度下的NaCl溶液、MgCl₂溶液、CaCl₂溶液实验,对比研究了裸TFBG和镀金TFBG传感器对溶液折射率的传感特性。从而验证了模拟仿真得出的结论并定量分析得知：镀金后具有表面等离子体共振的TFBG溶液折射率灵敏度大于500 nm·RIU-1,而裸TFBG为2 nm·RIU-1左右,大约提高了200～300倍,且在一定范围内中心波长与溶液折射率的线性拟合度都在0.99以上。     

Long period grating cascaded to photonic crystal fiber modal interferometer for simultaneous measurement of temperature and refractive index

We propose and demonstrate a novel and simple dual-parameter measurement scheme based on a cascaded optical fiber device of long-period grating (LPG) and photonic crystal fiber (PCF) modal interferometer. The temperature and refractive index (RI) can be measured simultaneously by monitoring the spectral characteristics of the device. The implemented sensor shows distinctive spectral sensitivities of -30.82 nm/RIU (refractive index unit) and 47.4 pm/°C by the LPG, and 171.96 nm/RIU and 10.4 pm/°C by the PCF modal interferometer. The simultaneous measurement of the temperature and external RI is experimentally demonstrated by the sensor. The temperature shift and RI shift calculated by the sensor matrix agree well with the actual temperature and RI change in the experiment.     

Investigation on micro/nanofiber Bragg grating for refractive index sensing

We propose a refractometric sensor based on micro/nanofiber Bragg grating (MNFBG). The refractive index (RI) sensing performance dependence on the fiber radius and Bragg grating period of the sensor, as well as the temperature cross-sensitive effect, is investigated theoretically. The simulation results demonstrate that 400 nm-radius MNFBG has a linear response to RI ranging from 1.3 to 1.39 with a sensitivity as high as 992.7 nm/RIU and half temperature cross-sensitivity of normal FBG. A maximum sensitivity of up to 1200 nm/RIU and an outstanding RI resolution of 8.3 × 10^-6 can be achieved. MNFBG has high potential in various types of optical fiber sensor applications.     

Temperature-calibrated fiber-optic refractometer based on acompact FBG-SMS structure

A novel all-fiber temperature-calibrated refractometer based on a compact fiber Bragg grating(FBG) single-multi-single(SMS)structure is proposed and experimentally demonstrated.The sensor head is composed of a FBG combined with a SMS structure,in which the middle multimode fiber(MMF)section is etched by a time-controlled hydrofluoric.The transmission dip of SMS is extremely sensitive to ambient refractive index(RI)variation,whereas the upstream FBG provides the necessary temperature information for RI calibration.All aforementioned functions are performed via a compact FBG-SMS structure not longer than 25 mm.The proposed sensing device provides a linear RI sensitivity over water or waterbased solutions(RI values near 1.33 at optical wavelengths for most biological and many environmental applications),and has temperature-calibration capability.Hence,the said refractometer is a good candidate for sensing in chemical and biological applications.     

非本征敏感法布里-珀罗腔高精度光纤液位传感器输出特性

依据光学法布里珀罗(F-P)腔基本原理,分析了非本征敏感法布里珀罗腔光纤液位传感器工作原理及设计方案。实验结果表明,传感器具有良好的多周期输出特性和局部的线性特性,但法布里珀罗腔输出光强幅度随腔长增大逐渐衰减,传感器输出特性曲线中不同部分相同长度的线性工作区间却对应不同的测量量程和灵敏度。改变传感头中敏感组件的尺寸可满足对不同液位测量的需要。本传感器最大量程为20 m,精度为±0.5 mm,最小分辨力为0.3 mm。传感器特别适用于对易燃易爆液位精确测量,具有很强的实用性。     

Fiber-Bragg-grating-assisted surface plasmon-polariton sensor

A theoretical scheme for a new surface plasmon-polariton (SPP) fiber sensor with a fiber Bragg grating imprinted into the fiber core for SPP excitation is presented for the first time to our knowledge. In our scheme the energy in the fiber core mode can be transferred to a SPP with high efficiency by means of a properly designed short-period fiber Bragg grating (SPG). Developed for the cylindrical (fiber) geometry, our scheme without loss of generality can be applied to a planar geometry. Our simulations are based on the coupled-mode method and are performed at telecommunications wavelengths.     

Highly sensitive bend sensor with hybrid long-period and tilted fiber Bragg grating

We demonstrate a new type of fiber optic bend sensor with a hybrid structure made up of a long period grating (LPG) and a tilted fiber Bragg grating (TFBG). The sensing mechanism is based on the spectrum of power transfers between the core and cladding modes from a TFBG located downstream from a LPG. We show that the curvature of a beam can be determined by the reflected power difference between the core mode and the recoupled cladding modes. We further provide design rules for the LPG and TFBG to optimize and linearize the sensor response. In addition, the temperature cross-sensitivities of this configuration are also investigated for two different types of fiber.     

具有温度自校准功能的光纤折射率传感器

提出一种具有温度自校准功能的光纤折射率（RI）传感器,传感头结构由2段很短的多模光纤（MMF）之间夹熔一段对折射率不敏感的光纤布拉格光栅（FBG）构成,传感头总长度为14 mm,FBG可以为折射率测量提供良好的温度校准功能。实验结果证明,该传感器的折射率灵敏度为126 nm。其干涉光谱共振波长的温度灵敏度为35.09 pm/℃,用于温度校准的FBG的温度灵敏度为11.14 pm/℃。相比于普通的折射率传感器,这种具有温度自校准功能的折射率传感器具有良好的实用前景。     

Fiber-optic liquid-level sensor using a long-period grating

A liquid-level sensor based on the refractive-index sensitivity of long-period fiber-optic gratings is proposed and demonstrated. The form of the transmission spectrum of the long-period grating is dependent on the fraction of the length of the long-period grating that is surrounded by the liquid. The sensor shows a large linear range, with sensitivity of 4.8% change in transmission per millimeter, for a long-period grating with a length of 40 mm and a periodicity of 400mu;m .     

Tilted fiber Bragg grating sensors

Optical fiber gratings have developed into a mature technology with a wide range of applications in various areas, including physical sensing for temperature, strain, acoustic waves and pressure. All of these applications rely on the perturbation of the period or refractive index of a grating inscribed in the fiber core as a transducing mechanism between a quantity to be measured and the optical spectral response of the fiber grating. This paper presents a relatively recent variant of the fiber grating concept, whereby a small tilt of the grating fringes causes coupling of the optical power from the core mode into a multitude of cladding modes, each with its own wavevector and mode field shape. The main consequence of doing so is that the differential response of the modes can then be used to multiply the sensing modalities available for a single fiber grating and also to increase the sensor resolution by taking advantage of the large amount of data available. In particular, the temperature cross‐sensitivity and power source fluctuation noise inherent in all fiber grating designs can be completely eliminated by referencing all the spectral measurements to the wavelength and power level of the core mode back‐reflection. The mode resonances have a quality factor of 10⁵, and they can be observed in reflection or transmission. A thorough review of experimental and theoretical results will show that tilted fiber Bragg gratings can be used for high resolution refractometry, surface plasmon resonance applications, and multiparameter physical sensing (strain, vibration, curvature, and temperature).     

长周期光纤光栅气敏薄膜传感器结构优化

基于三包层长周期光纤光栅模型,研究了包层表面涂覆一层溶胶凝胶气敏薄膜的长周期光纤光栅化学传感器的灵敏度Sn与薄膜光学参量(折射率n3和厚度h3)和光纤光栅结构参量(光栅周期、折变量和光栅长度)之间的关系。采用最优化数值方法,找到了获得高灵敏度所需的最佳膜层光学参量和光栅结构参量。理论计算表明,该类型传感器对膜层折射率的测量分辨率高达10-8。实验上制作了对乙醇气体敏感的传感器,并证实了传感器结构优化的必要性。     

Fiber Bragg grating sensor for petroleum hydrocarbon leak detection

A novel type of fiber optic Bragg grating sensor for petroleum hydrocarbon leak detection is presented. The sensor structure includes attached to the fiber a polymer member, which reversibly expands in hydrocarbon presence and strains the fiber section with the Bragg grating inside. A shift of the grating Bragg wavelength due to fiber strain is more than 2 nm for 20-min gasoline influence, which significantly exceeds a shift due to possible environmental temperature variation.     

基于光谱特征分析的光纤光栅腐蚀传感器研究

针对航空航天领域铝合金结构服役过程腐蚀监测需求,提出了一种基于铝质细管结构的预载荷型光纤光栅腐蚀传感器。给出了铝合金结构腐蚀在役监测机理,得到光纤光栅反射光谱特征与铝质细管厚度变化之间的理论关系模型,构建了酸碱环境下的光纤光栅腐蚀监测试验系统。通过在细管内部配置不受力且仅感受温度变化的光纤光栅传感器,解决了被测目标的温度与应力交叉敏感问题。研究表明,这种铝质细管封装设计不仅可以感受腐蚀对其力学性能的影响,还能够屏蔽外界腐蚀因素对管内光纤感知器件的干扰。随着金属管腐蚀程度加深,其管壁逐渐变薄,光纤光栅反射光谱逐渐向短波长方向偏移,且管壁厚度变化与光栅中心波长偏移量之间呈较好单调关系。这些特性能够为进一步开展基于光纤感知器件的机械结构在役腐蚀监测研究提供有益帮助。     

光纤光栅漏油传感器在石油工业健康监测中的应用

光纤光栅漏油传感器作为石油工业健康监测的智能器件具有很好的发展前景。设计了一种应用于石油工业健康监测的光纤光栅漏油传感器。通过实验得出：该光纤光栅传感器漏油报警线为1.0nm,响应时间小于3min,且该传感器具有良好的综合性能和安全使用性,能够在石油工业健康监测中起到积极的作用。     

Hybrid FBG–LPG sensor for surrounding refractive index and temperature simultaneous discrimination

In this work, we propose a configuration of a hybrid fiber Bragg grating together with a long period grating sensor used for simultaneously detect surrounding refractive index and temperature to be applied in aqueous environment and to reveal pollution. We present the simulation of such sensor and analyze the reflected wavelength and amplitude variations of the fiber Bragg grating spectrum to obtain the temperature and the external refractive index variations, respectively. The results show that the fiber Bragg grating reflected amplitude change depends on the variation of the long period grating transmission spectrum with the surrounding refractive index modification and the reflected wavelength shift depends on the temperature of the aqueous solution.