Asymmetry in platinum acetylide complexes: confinement of the triplet exciton to the lowest energy ligand

To determine structure-optical property relationships in asymmetric platinum acetylide complexes, we synthesized the compounds trans-Pt(PBu3)2(C[triple bond]CC6H5)(C[triple bond]C-C6H4-C[triple bond]CC6H5) (PE1-2), trans-Pt(PBu3)2(C[triple bond]CC6H5)(C[triple bond]C-C6H4-C[triple bond]C-C6H4-C[triple bond]CC6H5) (PE1-3) and trans-Pt(PBu3)2(C[triple bond]C-C6H4-C[triple bond]CC6H5)(C[triple bond]C-C6H4-C[triple bond]C-C6H4-C[triple bond]CC6H5) (PE2-3) that have different ligands on either side of the platinum and compared their spectroscopic properties to the symmetrical compounds PE1, PE2 and PE3. We measured ground state absorption, fluorescence, phosphorescence and triplet state absorption spectra and performed density functional theory (DFT) calculations of frontier orbitals, lowest lying singlet states, triplet state geometries and energies. The absorption and emission spectra give evidence the singlet exciton is delocalized across the central platinum atom. The phosphorescence from the asymmetric complexes comes from the largest ligand. Time-dependent (TD) DFT calculations show the S1 state has mostly highest occupied molecular orbital (HOMO) --> lowest unoccupied molecular orbital (LUMO) character, with the LUMO delocalized over the chromophore. In the asymmetric chromophores, the LUMO resides on the larger ligand, suggesting the S1 state has interligand charge transfer character. The triplet state geometries obtained from the DFT calculations show distortion on the lowest energy ligand, whereas the other ligand has the ground state geometry. The calculated trend in the triplet state energies agrees very well with the experimental trend. Calculations of triplet state spin density also show the triplet exciton is confined to one ligand. In the asymmetric complexes the spin density is confined to the largest ligand. The results show Kasha's rule applies to these complexes, where the triplet exciton moves to the lowest energy ligand.     

Structural, photophysical, and nonlinear absorption properties of trans-di-arylalkynyl platinum(II) complexes with phenyl and thiophenyl groups

Optical power limiting and luminescence properties of two Pt(II) complexes with thiophenyl and phenyl groups in the ligands, trans-Pt(P(n-Bu)3)2(C[triple bond]C-Ar)2, where Ar = -C4H2S-C[triple bond]C-p-C6H4-n-C5H11 (1) and -p-C6H4-C[triple bond]C-C4H3S (2), have been investigated. The fluorescence lifetimes were found to be on the sub-nanosecond time scale, and the quantum yields were low, in accord with fast intersystem crossing from the excited singlet to triplet manifold. The phosphorescence lifetimes of 1 and 2 were shorter than that of a Pt(II) complex having two phenyl groups in the ligands. In order to elucidate the C-Pt bonding nature in the ground state, the 13C NMR chemical shift of the carbon directly bonded to Pt, the coupling constants 1JPtC, 2JPtC, and 1JPtP, and IR nuC[triple bond]C wavenumbers were obtained for 1, 2, and three other trans-diarylalkynyl Pt(II) complexes. X-ray diffraction data of 1 and 2 and density functional theory calculated geometries of models of 1, 2, and trans-Pt(P(n-Bu)3)2(C[triple bond]C-p-C6H4-C[triple bond]C-C6H5)2 (3) show that 1 preferably exists in a different conformation from that of 2 and 3. The variations in photophysical, NMR, and IR data can be rationalized by differences in geometry and pi-backbonding from Pt to the alkynyl ligand.     

Spatial extent of the singlet and triplet excitons in luminescent angular-shaped transition-metal diynes and polyynes comprising non-pi-conjugated group 16 main group elements

A novel approach based on conjugation interruption has been developed and is presented for a series of luminescent and thermally stable chalcogen-bridged platinum(II) polyyne polymers trans-[{-Pt(PBu3)2C[triple bond]C(C6H4)E(C6H4)C[triple bond]C-}n] (E = O, S, SO, SO2). Particular attention was focused on the photophysical properties of these Group 10 polymetallaynes and comparison was made to their binuclear model complexes trans-[Pt(Ph)(PEt3)2C[triple bond]C(C6H4)E(C6H4)C[triple bond]CPt(Ph)(PEt3)2] and their closest Group 11 gold(I) and Group 12 mercury(II) neighbours, [MC[triple bond]C(C6H4)E(C6H4)C[triple bond]CM] (M = Au(PPh3), HgMe; E = O, S, SO, SO2). The regiochemical structures of these angular-shaped molecules were studied by NMR spectroscopy and single-crystal X-ray structural analyses. Upon photoexcitation, each one has an intense purple-blue fluorescence emission near 400 nm in dilute fluid solutions at room temperature. Harvesting of the organic triplet emissions harnessed through the strong heavy-atom effects of Group 10-12 transition metals was studied in detail. These metal-containing aryleneethynylenes spaced by chalcogen units were found to have large optical gaps and high-energy triplet states. The influence of metal- and chalcogen-based conjugation interrupters on the intersystem crossing rate and on the spatial extent of the lowest singlet and triplet excitons was fully elucidated. We discuss and compare the phosphorescence spectra of these transition-metal diynes and polyynes in terms of the nature of the metal centre, conjugated chain length and Group 16 spacer unit. Our work here indicates that high-energy triplet states in these materials intrinsically give rise to very efficient phosphorescence with fast radiative decays and one could readily observe room-temperature phosphorescence for the platinum polyynes.     

Phosphorescent platinum acetylide organogelators

The series of platinum acetylide oligomers (PAOs) with the general structure trans,trans-[(RO)3Ph-C[triple bond]C-Pt(PMe3)2-C[triple bond]C-(Ar)-C[triple bond]C-Pt(PMe3)2-C[triple bond]C-Ph(OR)3], where Ar = 1,4-phenylene, 2,5-thienylene, or bis-2,5-(S-2-methylbutoxy)-1,4-phenylene and R = n-C12H25 gel hydrocarbon solvents at concentrations above 1 mM. Gelation is thermally reversible (T(gel-sol) approximately 40-50 degrees C), and it occurs due to aggregation of the PAOs resulting in the formation of a fibrous network that is observed for dried gels imaged by TEM. The influence of aggregation/gelation on the photophysical properties of the PAOs is explored in detail. Aggregation induces a significant blue shift in the oligomers' absorption spectra, and the shift is attributed to exciton interactions arising from H-aggregation of the chromophores. Strong circular dichroism (CD) is observed for gelled solutions of a PAO substituted with homochiral S-2-methylbutoxy side chains on the central phenylene unit. The CD is attributed to formation of a chiral supramolecular aggregate structure. The PAOs are phosphorescent at ambient temperature in solution and in the aggregate/gel state. The phosphorescence band is blue-shifted ca. 20 nm in the aggregate/gel, and the shift is assigned to emission from an unrelaxed conformation of the triplet excited state. Phosphorescence spectroscopy of mixed aggregate/gels consisting of a triplet donor/host oligomer (Ar = 1,4-phenylene) doped with low concentrations of an acceptor/trap oligomer (Ar = 2,5-thienylene) indicates that energy transfer occurs efficiently in the aggregates. Triplet energy transfer involves exciton diffusion among the host chromophores followed by Dexter exchange energy transfer to the trap chromophore.     

Synthesis and characterization of mono- and binuclear platinum complexes containing terminal and bridging diynyldiphenylphosphine ligands

A series of mononuclear platinum complexes containing diynyldiphenylphosphine ligands [cis-Pt(C(6)F(5))(2)(PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CR)L](n)(n= 0, L = tht, R = Ph 2a, Bu(t)2b; L = PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CR, 4a, 4b; n=-1, L = CN(-), 3a, 3b) has been synthesized and the X-ray crystal structures of 4a and 4b have been determined. In order to compare the eta2-bonding capability of the inner and outer alkyne units, the reactivity of towards [cis-Pt(C(6)F(5))(2)(thf)(2)] or [Pt(eta2)-C(2)H(4))(PPh(3))(2)] has been examined. Complexes coordinate the fragment "cis-Pt(C(6)F(5))(2)" using the inner alkynyl fragment and the sulfur of the tht ligand giving rise the binuclear derivatives [(C(6)F(5))(2)Pt(mu-tht)(mu-1kappaP:2eta2-C(alpha),C(beta)-PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CR)Pt(C(6)F(5))(2)](R = Ph 5a, Bu(t)5b). The phenyldiynylphosphine complexes 2a, 3a and 4a react with [Pt(eta2)-C(2)H(4))(PPh(3))(2)] to give the mixed-valence Pt(II)-Pt(0) complexes [((C(6)F(5))(2)LPt(mu-1kappaP:2eta2)-C(5),C(6)-PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CPh))Pt(PPh(3))(2)](n)(L = tht 6a, CN 8a and PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CPh 9a) in which the Pt(0) fragment is eta2-complexed by the outer fragment. Complex 6a isomerizes in solution to a final complex [((C(6)F(5))(2)(tht)Pt(mu-1kappaP:2eta2)-C(alpha),C(beta)-PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CPh))Pt(PPh(3))(2)]7a having the Pt(0) fragment coordinated to the inner alkyne function. In contrast, the tert-butyldiynylphosphine complexes 2b and 3b coordinate the Pt(0) unit through the phosphorus substituted inner acetylenic entity yielding 7b and 8b. By using 4a and 2 equiv. of [Pt(eta2)-C(2)H(4))(PPh(3))(2)] as precursors, the synthesis of the trinuclear complex [cis-((C(6)F(5))(2)Pt(mu-1kappaP:2eta2)-C(5),C(6)-PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CPh)(2))(Pt(PPh(3))(2))(2)]10a, bearing two Pt(0)(PPh(3))(2)eta2)-coordinated to the outer alkyne functions is achieved. The structure of 7a has been confirmed by single-crystal X-ray diffraction.     

Synthesis, photophysics, electrochemistry, theoretical, and transient absorption studies of luminescent copper(I) and silver(I) diynyl complexes. X-ray crystal structures of [Cu3(micro-dppm)3(micro3-eta1-C triple bond CC triple bond CPh)2]PF6 and [Cu3(micro-dppm)3(micro3-eta1-C triple bond CC triple bond CH)2]PF6

A series of soluble trinuclear copper(I) and silver(I) complexes containing bicapped diynyl ligands, [M(3)(micro-dppm)(3)(micro(3)-eta(1)-C triple bond CC triple bond CR)(2)]PF(6) (M = Cu, R = Ph, C(6)H(4)-CH(3)-p, C(6)H(4)-OCH(3)-p, (n)C(6)H(13), H; M = Ag, R = Ph, C(6)H(4)-OCH(3)-p), has been synthesized and their electronic, photophysical, and electrochemical properties studied. The X-ray crystal structures of [Cu(3)(micro-dppm)(3)(micro(3)-eta(1)-C triple bond CC triple bond CPh)(2)]PF(6) and [Cu(3)(micro-dppm)(3)(micro(3)-eta(1)-C triple bond CC triple bond CH)(2)]PF(6) have been determined.     

Room-temperature phosphorescence and energy transfer in luminescent multinuclear platinum(II) complexes of branched alkynyls

A series of luminescent branched platinum(II) alkynyl complexes, [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]C-C6H4C[triple bond]C}3C6H3] (R=C6H5, C6H4OMe, C6H4Me, C6H4CF3, C5H4N, C6H4SAc, 1-napthyl (Np), 1-pyrenyl (Pyr), 1-anthryl-8-ethynyl (HC[triple bond]CAn)), [1,3-{PyrC[triple chemical bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3], and [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-(HC[triple bond]C)C6H3], was successfully synthesized by using the precursors [1,3,5-{Cl(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] or [1,3-{Cl(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3]. The X-ray crystal structures of [1,3,5-{MeOC6H4C[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] and [1,8-{Cl(PEt3)2PtC[triple bond]C}2An] have been determined. These complexes were found to show long-lived emission in both solution and solid-state phases at room temperature. The emission origin of the branched complexes [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] with R=C6H5, C6H4OMe, C6H4Me, C6H4CF3, C5H4N, and C6H4SAc was tentatively assigned to be derived from triplet states of predominantly intraligand (IL) character with some mixing of metal-to-ligand charge-transfer (MLCT) (dpi(Pt)-->pi*(C[triple bond]CR)) character, while the emission origin of the branched complexes with polyaromatic alkynyl ligands, [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] with R=Np, Pyr, or HC[triple bond]CAn, [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3], [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-(HC[triple bond]C)C6H3], and [1,8-{Cl(PEt3)2PtC[triple bond]C}2An], was tentatively assigned to be derived from the predominantly 3IL states of the respective polyaromatic alkynyl ligands, mixed with some 3MLCT (d(pi)(Pt)-->pi*(C[triple bond]CR)) character. By incorporating different alkynyl ligands into the periphery of these branched complexes, one could readily tune the nature of the lowest energy emissive state and the direction of the excitation energy transfer.     

A new series of luminescent phosphine stabilised platinum ethynyl complexes

A series of cis-platinum ethynyl complexes with the general formula cis-[Pt(dppe)(C[triple bond]CR)2](dppe = 1,2-bis(diphenylphosphino)ethane; R = C6H4-p-NO2 1, C6H4-p-CH3 2, C6H4-p-C[triple bond]CH 3 and C6H4-p-C6H4-p-C[triple bond]CH 4) have been prepared by the coupling reaction of cis-[Pt(dppe)Cl2] with two equivalents of the appropriate alkyne. The new complexes have been fully characterized by spectroscopic techniques, and the cis square planar arrangement at the platinum centre has been confirmed by single-crystal X-ray diffraction studies of complexes 1, 2 and 4. The absorption spectra of the complexes 1-4 are dominated by a pi-->pi* band that contains some platinum (n + 1) p orbital character. The position of the band is dependent on the electron donating or withdrawing properties of the ethynyl substituents, R. Complex 1 displays a triplet emission in the green, at room temperature, while complexes 2-4, display singlet emissions in the blue. Again, the difference can be attributed to the nature of the R substituents.     

Spectroscopic characterization of a series of platinum acetylide complexes having a localized triplet exciton

In this work, we describe the spectroscopic properties of a series of platinum complexes containing one acetylide ligand per platinum, having the chemical formula trans-Pt(PBu(3))(2)((C[triple bond]CC(6)H(4))(n)()-H)Cl, n = 1-3 (designated as half-PEn-Pt) and compare their spectroscopic behavior with the well-characterized series trans-Pt(PBu(3))(2)((C[triple bond]CC(6)H(4))(n)-H)(2), n = 1-3 (designated as PEn-Pt). This comparison aims to determine if the triplet state of PEn-Pt is confined to one ligand or delocalized across the central platinum atom. We measured ground-state absorption spectra, fluorescence spectra, phosphorescence spectra, and triplet-state absorption spectra. The ground-state absorption spectra and fluorescence spectra both showed a blue shift when comparing half-PEn-Pt with PEn-Pt, showing the S(1) state is delocalized across the platinum. In contrast, the phosphorescence spectra of the two types of compounds had the same 0-0 band energy, showing the T(1) state was confined to one ligand in PEn-Pt. The triplet state absorption spectra blue shifted when comparing half-PEn-Pt with PEn-Pt, showing the T(n) state was delocalized across the central platinum. This comparison supports recently published work that suggested this confinement effect (Rogers, J. E et al. J. Chem. Phys. 2005, 122, 214701).     

Computational analyses of singlet-singlet and singlet-triplet transitions in mononuclear gold-capped carbon-rich conjugated complexes

Density functional theory and CASSCF calculations have been used to determine equilibrium geometries and vibrational frequencies of metal-capped one-dimensional pi-conjugated complexes (H3P)Au(C[triple chemical bond]C)(n)(Ph) (n = 1-6), (H3P)Au(C[triple chemical bond]CC6H4)(C[triple chemical bond]CPh), and H3P--Au(C[triple chemical bond]CC6H4)C[triple chemical bond]CAu--PH3 in their ground states and selected low-lying pi(pi)* excited states. Vertical excitation energies for spin-allowed singlet-singlet and spin-forbidden singlet-triplet transitions determined by the time-dependent density functional theory show good agreement with available experimental observations. Calculations indicate that the lowest energy 3(pi(pi)*) excited state is unlikely populated by the direct electronic excitation, while the low-lying singlet and triplet states, slightly higher in energy than the lowest triplet state, are easily accessible by the excitation light used in experiments. A series of radiationless transitions among related excited states yield the lowest 3(pi(pi)*) state, which has enough long lifetimes to exhibit its photochemical reactivities.     

Aluminacyclopropene: syntheses, characterization, and reactivity toward terminal alkynes

Reactions of LAl with ethyne, mono- and disubstituted alkynes, and diyne to aluminacyclopropene LAl[eta2-C2(R1)(R2)] ((L = HC[(CMe)(NAr)]2, Ar = 2,6-iPr2C6H3); R1 = R2 = H, (1); R1 = H, R2 = Ph, (2); R1 = R2 = Me, (3); R1 = SiMe3, R2 = C[triple bond]CSiMe3, (4)) are reported. Compounds 1 and 2 were obtained in equimolar quantities of the starting materials at low temperature. The amount of C2H2 was controlled by removing an excess of C2H2 in the range from -78 to -50 degrees C. Compound 4 can be alternatively prepared by the substitution reaction of LAl[eta2-C2(SiMe3)2] with Me3SiC[triple bond]CC[triple bond]CSiMe3 or by the reductive coupling reaction of LAlI2 with potassium in the presence of Me3SiC[triple bond]CC[triple bond]CSiMe3. The reaction of LAl with excess C2H2 and PhC[triple bond]CH (<1:2) afforded the respective alkenylalkynylaluminum compounds LAl(CH=CH2)(C[triple bond]CH) (5) and LAl(CH=CHPh)(C[triple bond]CPh) (6). The reaction of LAl(eta2-C2Ph2) with C2H2 and PhC[triple bond]CH yielded LAl(CPh=CHPh)(C[triple bond]CH) (7) and LAl(CPh=CHPh)(C[triple bond]CPh) (8), respectively. Rationally, the formation of 5 (or 6) may proceed through the corresponding precursor 1 (or 2). The theoretical studies based on DFT calculations show that an interaction between the Al(I) center and the C[triple bond]C unit needs almost no activation energy. Within the AlC2 ring the computational Al-C bond order of ca. 1 suggests an Al-C sigma bond and therefore less pi electron delocalization over the AlC2 ring. The computed Al-eta2-C2 bond dissociation energies (155-82.6 kJ/mol) indicate a remarkable reactivity of aluminacyclopropene species. Finally, the 1H NMR spectroscopy monitored reaction of LAl(eta2-C2Ph2) and PhC[triple bond]CH in toluene-d8 may reveal an acetylenic hydrogen migration process.     

Acetylide-bridged organometallic oligomers via the photochemical metathesis of methyl-iron(II) complexes

The acetylido methyl iron(II) complexes, cis/trans-[Fe(dmpe)(2)(C[triple bond]CR)(CH(3))] (1) and trans-[Fe(depe)(2)(C[triple bond]CR)(CH(3))] (2) (dmpe = 1,2-dimethylphoshinoethane; depe = 1,2-diethylphosphinoethane), were synthesized by transmetalation from the corresponding alkyl halide complexes. Acetylido methyl iron(II) complexes were also formed by transmetalation from the chloride complexes, trans-[Fe(dmpe)(2)(C[triple bond]CR)(Cl)] or trans-[Fe(depe)(2)(C[triple bond]CR)(Cl)]. The structure of trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(5))(CH(3))] (1a) was determined by single-crystal X-ray diffraction. The methyl acetylido iron complexes, [Fe(dmpe)(2)(C[triple bond]CR)(CH(3))] (1), are thermally stable in the presence of acetylenes; however, under UV irradiation, methane is lost with the formation of a metal bisacetylide. Photochemical metathesis of cis- or trans-[Fe(dmpe)(2)(CH(3))(C[triple bond]CR)] (R = C(6)H(5) (1a), 4-C(6)H(4)OCH(3) (1b)) with terminal acetylenes was used to selectively synthesize unsymmetrically substituted iron(II) bisacetylide complexes of the type trans-[Fe(dmpe)(2)(C[triple bond]CR)(C[triple bond]CR')] [R = Ph, R' = Ph (6a), 4-CH(3)OC(6)H(4) (6b), (t)()Bu (6c), Si(CH(3))(3) (6d), (CH(2))(4)C[triple bond]CH (6e); R = 4-CH(3)OC(6)H(4), R' = 4-CH(3)OC(6)H(4), (6g), (t)()Bu (6h), (CH(2))(4)C[triple bond]CH (6i), adamantyl (6j)]. The structure of the unsymmetrical iron(II) bisacetylide complex trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(5))(C[triple bond]CC(6)H(4)OCH(3))] (6b) was determined by single-crystal X-ray diffraction. The photochemical metathesis of the bis-acetylene, 1,7-octadiyne, with trans-[Fe(dmpe)(2)(CH(3))(C[triple bond]CPh)] (1a), was utilized to synthesize the bridged binuclear species trans,trans-[(C(6)H(5)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(C[triple bond]CC(6)H(5))] (11). The trinuclear species trans,trans,trans-[(C(6)H(5)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(C[triple bond]CC(6)H(5))] (12) was synthesized by the photochemical reaction of Fe(dmpe)(2)(C[triple bond]CPh)(C[triple bond]C(CH(2))(4)C[triple bond]CH) (6e) with Fe(dmpe)(2)(CH(3))(2). Extended irradiation of the bisacetylide complexes with phenylacetylene resulted in insertion of the terminal alkyne into one of the metal acetylide bonds to give acetylide butenyne complexes. The structure of the acetylide butenyne complex, trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(4)OCH(3))(eta(1)-C(C(6)H(5))=CH(C[triple bond]CC(6)H(4)OCH(3)))] (9a) was determined by single-crystal X-ray diffraction.     

Mixed-transition-metal acetylides: synthesis and characterization of complexes with up to six different transition metals connected by carbon-rich bridging units

The synthesis and reaction chemistry of heteromultimetallic transition-metal complexes by linking diverse metal-complex building blocks with multifunctional carbon-rich alkynyl-, benzene-, and bipyridyl-based bridging units is discussed. In context with this background, the preparation of [1-{(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C}-3-{(tBu(2)bpy)(CO)(3)ReC[triple bond]C}-5-(PPh(2))C(6)H(3)] (10) (dppf = 1,1'-bis(diphenylphosphino)ferrocene; tBu(2)bpy = 4,4'-di-tert-butyl-2,2'-bipyridyl; Ph = phenyl) is described; this complex can react further, leading to the successful synthesis of heterometallic complexes of higher nuclearity. Heterotetrametallic transition-metal compounds were formed when 10 was reacted with [{(eta(5)-C(5)Me(5))RhCl(2)}(2)] (18), [(Et(2)S)(2)PtCl(2)] (20) or [(tht)AuC[triple bond]C-bpy] (24) (Me = methyl; Et = ethyl; tht = tetrahydrothiophene; bpy = 2,2'-bipyridyl-5-yl). Complexes [1-{(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C}-3-{(tBu(2)bpy)(CO)(3)ReC[triple bond]C}-5-{PPh(2)RhCl(2)(eta(5)-C(5)Me(5))}C(6)H(3)] (19), [{1-[(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C]-3-[(tBu(2)bpy)(CO)(3)ReC[triple bond]C]-5-(PPh(2))C(6)H(3)}(2)PtCl(2)] (21), and [1-{(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C}-3-{(tBu(2)bpy)(CO)(3)ReC[triple bond]C}-5-{PPh(2)AuC[triple bond]C-bpy}C(6)H(3)] (25) were thereby obtained in good yield. After a prolonged time in solution, complex 25 undergoes a transmetallation reaction to produce [(tBu(2)bpy)(CO)(3)ReC[triple bond]C-bpy] (26). Moreover, the bipyridyl building block in 25 allowed the synthesis of Fe-Ru-Re-Au-Mo- (28) and Fe-Ru-Re-Au-Cu-Ti-based (30) assemblies on addition of [(nbd)Mo(CO)(4)] (27), (nbd = 1,5-norbornadiene), or [{[Ti](mu-sigma,pi-C[triple bond]CSiMe(3))(2)}Cu(N[triple bond]CMe)][PF(6)] (29) ([Ti] = (eta(5)-C(5)H(4)SiMe(3))(2)Ti) to 25. The identities of 5, 6, 8, 10-12, 14-16, 19, 21, 25, 26, 28, and 30 have been confirmed by elemental analysis and IR, (1)H, (13)C{(1)H}, and (31)P{(1)H} NMR spectroscopy. From selected samples ESI-TOF mass spectra were measured. The solid-state structures of 8, 12, 19 and 26 were additionally solved by single-crystal X-ray structure analysis, confirming the structural assignment made from spectroscopy.     

Borane reaction chemistry. Alkyne insertion reactions into boron-containing clusters. Products from the thermolysis of [6,9-(2-HC[triple bond]C-C5H4N)2-arachno-B10H12

The stirring of [ortho-(HC[triple bond]C)-C(5)H(4)N] with [nido-B(10)H(14)] in benzene affords [6,9-{ortho-(HC[triple bond]C)-C(5)H(4)N}(2)-arachno-B(10)H(12)] 1 in 93% yield. In the solid state, 1 has an extended complex three-dimensional structure involving intramolecular dihydrogen bonding, which accounts for its low solubility. Thermolysis of 1 gives the known [1-(ortho-C(5)H(4)N)-1,2-closo-C(2)B(10)H(11)] 2 (13%), together with new [micro-5(N),6(C)-(NC(5)H(4)-ortho-CH(2))-nido-6-CB(9)H(10)] 3 (0.4%), [micro-7(C),8(N)-(NC(5)H(4)-ortho-CH(2))-nido-7-CB(10)H(11)] (0.4%) , 4 binuclear [endo-6'-(closo-1,2-C(2)B(10)H(10))-micro-(1(C),exo-6'(N))-(ortho-C(5)H(4)N)-micro-(exo-8'(C),exo-9'(N))-(ortho-(CH(2)CH(2))-C(5)H(4)N)-arachno-B(10)H(10)] (0.5%) 5, and [exo-6(C)-endo-6(N)-(ortho-(CH[double bond]CH)-C(5)H(4)N)-exo-9(N)-(ortho-(HC[triple bond]C)-C(5)H(4)N)-arachno-B(10)H(11)] 6. An improved solvent-free route to 2 is also presented. This set of compounds features an increasing cluster incorporation of the ethynyl moiety, initially by an effective internal hydroboration, affording an arachno to nido and then a nido to arachno:closo sequence of cluster geometry. An alternative low-temperature route to internal hydroboration is demonstrated in the room temperature reaction of [closo-B(11)H(11)][N(n)Bu(4)](2) with CF(3)COOH and [ortho-(HC[triple bond]C)-C(5)H(4)N], which gives [micro-1(C),2(B)-[ortho-C(5)H(4)N-CH(2)]-closo-1-CB(11)H(10)] 7 (40%) in which one carbon atom is incorporated into the cluster; a similar reaction with [ortho-(N[triple bond]C)-C(5)H(4)N] affords [N(n)Bu(4)][7-(ortho-N[triple bond]C-C(5)H(4)N)-nido-B(11)H(12)], 8 (68%) and stirring [ortho-(N[triple bond]C)-C(5)H(4)N] with [nido-B(10)H(14)] quantitatively affords the cyano analogue of 1, [6,9-{ortho-(N[triple bond]C)-C(5)H(4)N}(2)-arachno-B(10)H(12)] 9. All compounds were characterised by single-crystal X-ray diffraction analysis and NMR spectroscopy.     

Radical ion states of platinum acetylide oligomers

The ion radicals of two series of platinum acetylide oligomers have been subjected to study by electrochemical and pulse radiolysis/transient absorption methods. One series of oligomers, Ptn, has the general structure Ph-C[triple bond]C-[Pt(PBu3)2-C[triple bond]C-(1,4-Ph)-C[triple bond]C-]n-Pt(PBu3)2-C[triple bond]C-Ph (where x=0-4, Ph=phenyl and 1,4-Ph=1,4-phenylene). The second series of oligomers, Pt4Tn, contain a thiophene oligomer core, -C[triple bond]C-(2,5-Th)n-C[triple bond]C- (where n=1-3 and 2,5-Th=2,5-thienylene), capped on both ends with -Pt(PBu3)2-C[triple bond]C-(1,4-Ph)-C[triple bond]C-Pt(PBu3)2-C[triple bond]C-Ph segments. Electrochemical studies reveal that all of the oligomers feature reversible or quasi-reversible one-electron oxidation at potentials less than 1 V versus SCE. These oxidations are assigned to the formation of radical cations on the platinum acetylide chains. For the longer oligomers multiple, reversible one-electron waves are observed at potentials less than 1 V, indicating that multiple positive polarons can be produced on the oligomers. Pulse-radiolysis/transient absorption spectroscopy has been used to study the spectra and dynamics of the cation and anion radical states of the oligomers in dichloroethane and tetrahydrofuran solutions, respectively. All of the ion radicals exhibit two allowed absorption bands: one in the visible region and the second in the near-infrared region. The ion radical spectra shift with oligomer length, suggesting that the polarons are delocalized to some extent on the platinum acetylide chains. Analysis of the electrochemical and pulse radiolysis data combined with the density functional theory calculations on model ion radicals provides insight into the electronic structure of the positive and negative ion radical states of the oligomers. A key conclusion of the work is that the polaron states are concentrated on relatively short oligomer segments.     

Photophysics of diplatinum polyynediyl oligomers: chain length dependence of the triplet state in sp carbon chains

The series of polyynes with the structure trans, trans-[Ar-Pt(P 2)-(C[triple bond]C) n -Pt(P 2)-Ar], where P = tri( p-tolyl)phosphine, Ar = p-tolyl, and n = 3, 4, 5, 6 (6, 8, 10, 12 sp carbon atoms), has been subjected to a comprehensive photophysical investigation. At low temperature ( T < 140 K) in a 2-methyltetrahydrofuran (MTHF) glass, the complexes exhibit moderately efficient phosphorescence appearing as a series of narrow (fwhm < 200 cm (-1)) vibronic bands separated by ca. 2100 cm (-1). The emission is assigned to a (3)pi,pi* triplet state that is concentrated on the sp carbon chain, and the vibronic progression arises from coupling of the excitation to the -C[triple bond]C- stretch. The 0-0 energy of the phosphorescence decreases with increasing sp carbon chain length, spanning a range of over 6000 cm (-1) across the series. Transient absorption spectroscopy carried out at ambient temperature confirms that the (3)pi,pi* triplet is produced efficiently, and it displays a strongly allowed triplet-triplet absorption. In the MTHF solvent glass ( T < 140 K), the emission lifetimes increase with emission energy. Analysis of the triplet nonradiative decay rates reveals a quantitative energy gap law correlation. The nonradiative decay rates can be calculated by using parameters recovered from a single-mode Franck-Condon fit of the emission spectra.     

Synthetic and structural studies on C-ethynyl- and C-bromo-carboranes

A high-yield preparation of the C-monoethynyl para-carborane, 1-Me(3)SiC[triple bond]C-1,12-C2B10H11, from C-monocopper para-carborane and 1-bromo-2-(trimethylsilyl)ethyne, BrC[triple bond]CSiMe(3) is reported. The low-yield preparation of 1,12-(Me3SiC[triple bond]C)2-1,12-C2B10H10 from the C,C'-dicopper para-carborane derivative with 1-bromo-2-(trimethylsilyl)ethyne, BrC[triple bond]CSiMe3, has been re-investigated and other products were identified including the C-monoethynyl-carborane 1-Me3SiC[triple bond]C-1,12-C2B10H11 and two-cage assemblies generated from cage-cage couplings. The contrast in the yields of the monoethynyl and diethynyl products is due to the highly unfavourable coupling process between 1-RC[triple bond]C-12-Cu-1,12-C2B10H10 and the bromoalkyne. The ethynyl group at the cage carbon C(1) strongly influences the chemical reactivity of the cage carbon at C(12)-the first example of the "antipodal effect" affecting the syntheses of para-carborane derivatives. New two-step preparations of 1-ethynyl- and 1,12-bis(ethynyl)-para-carboranes have been developed using a more readily prepared bromoethyne, 1-bromo-3-methyl-1-butyn-3-ol, BrC[triple bond]CCMe2OH. The molecular structures of the two C-monoethynyl-carboranes, 1-RC[triple bond]C-1,12-C2B10H11 (R = H and Me3Si), were experimentally determined using gas-phase electron diffraction (GED). For R = H (R(G) = 0.053) a model with C(5v) symmetry refined to give a C[triple bond]C bond distance of 1.233(5) A. For R = Me3Si (R(G) = 0.048) a model with C(s) symmetry refined to give a C[triple bond]C bond distance of 1.227(5) A. Molecular structures of 1,12-Br2-1,12-C2B10H10, 1-HC[triple bond]C-12-Br-1,12-C2B10H10 and 1,12-(Me(3)SiC[triple bond]C)2-1,12-C2B10H10 were determined by X-ray crystallography. Substituents at the cage carbon atoms on the C2B10 cage skeleton in 1-X-12-Y-1,12-C2B10H10 derivatives invariably lengthen the cage C-B bonds. However, the subtle substituent effects on the tropical B-B bond lengths in these compounds are more complex. The molecular structures of the ethynyl-ortho-carborane, 1-HC[triple bond]C-1,2-C2B10H11 and the ethene, trans-Me3SiBrC=CSiMe3Br are also reported.     

Synthesis and properties of alkynethiolate gold(I) complexes

A series of alkynethiolate gold(I) derivatives have been synthesised by the cleavage of 4-monosubstituted 1,2,3-thiadiazoles in the presence of strong bases. The syntheses of the 1.2,3-thiadiazoles with p-cyanophenyl, p-tolyl, 2-thienyl, 3-thienyl and 9,9-dimethylfluoren-2-yl fragments are also described. All the complexes have been characterised by spectroscopic techniques and the complexes [Au(p-CH3-C6H4-C[triple bond]C-S)PPh3], [Au(3-C4H3S-C[triple bond]C-S)PPh3] and PPN[Au(p-CH3-C6H4-C[triple bond]C-S)(C6F5)] by X-ray analysis. The electrochemically polymerizable mononuclear bis(alkynethiolate) gold(I) complex PPN[Au(3-C4H3S-C[triple bond]C-S)2] is also described, including its electropolymerization and electrochemical properties.     

Synthesis and some properties of binuclear ruthenocenes bridged by oligoynes: formation of bis(cyclopentadienylidene)cumulene diruthenium complexes in the two-electron oxidation

The monoynes [Rc*C[triple bond]CRc*] and [Rc'C[triple bond]CRc'] were obtained in improved yields using [Mo(CO)6]/2-FC6H5OH as a catalyst in the alkyne metathesis of [Rc*C[triple bond]CMe] and [Rc'C[triple bond]CMe], respectively (Rc = ruthenocenyl, Rc* = 1',2',3',4',5'-pentamethylruthenocenyl, and Rc' = 2',3',4',5'-tetramethylruthenocenyl groups). The diynes [Rc*(C[triple bond]C)2Rc*] and [Rc'(C[triple bond]C)2Rc'] were synthesized by the oxidative coupling of the corresponding terminal ethynes in good yields. The triyne [Rc*(C[triple bond]C)3Rc*] and the tetrayne [Rc*(C[triple bond]C)4Rc*] were prepared by the hetero- and homocoupling of [Rc*C[triple bond]CC[triple bond]CH], which was obtained from the reaction of [Rc*C[triple bond]CCHO] with Li[N2CSiMe3], respectively. Although the oxidation waves did not always exhibit a clear two-electron oxidation process, the oxidation potentials shifted to a lower potential with an increase in the number of methyl substituents on the ruthenocenyl ring, and shifted to a higher potential with the increase in the number of C[triple bond]C units; this result is in contrast to that found in the [Rc(CH=CH)(n)Rc] series. The chemical oxidation of [Rc'C[triple bond]CRc'] yielded a stable two-electron-oxidized species, the structure of which was confirmed by X-ray crystallography to be [Ru2(mu2-eta(6):eta(6)-C5Me4C=CC5Me4)(eta-C5H5)2](BF4)2. Changing the substituents (Rc, Rc*, and Rc') had no effect on the chemical oxidation, but in the case of the Rc' series the Me substituent increased the stability of the two-electron-oxidized species in solution. The diyne [Rc*(C[triple bond]C)2Rc*] and the triyne [Rc*(C[triple bond]C)3Rc*] also gave a similar but unstable two-electron-oxidized species. In acetone or acetonitrile, the two-electron-oxidized species of [Rc*C[triple bond]CRc*] and [Rc*(C[triple bond]C)2Rc*] gradually formed the corresponding bis(fulvene)-type complexes. This implies that the two-electron-oxidized species of [Rc*(C[triple bond]C)(n)Rc*] are destabilized with the increasing n.     

Functionalized platinum(II) terpyridyl alkynyl complexes as colorimetric and luminescence pH sensors

A series of platinum(II) terpyridyl alkynyl complexes that have been derivatized with basic amino functionalities, [Pt(tpy)(C[triple bond]C-C6H4-NR2-4]X (X = OTf-, R = CH3 1, R = CH2CH2OCH3 2, R = H 3; X = Cl-, R = CH3 4, R = CH2CH2OCH3 5, R = H 6) (tpy = 2,2':6',2' '-terpyridine), have been synthesized and characterized. Their photophysical responses at various acid concentrations were studied. The abilities of the complexes to function as colorimetric and luminescence pH sensors were demonstrated with dramatic color changes and luminescence enhancement upon introduction of acid.