Spectrofluorimetric study on the inclusion interaction between lomefloxacin and p-sulfonated calix[4]arene and its analytical application

The characteristics of host-guest complexation between p-sulfonated calix[4]arene (SC4A) and lomefloxacin (LMFX) were investigated by fluorescence spectrometry. A 1:1 stoichiometry for the complexation was established and an association constant of 6.48x10(4) l mol-1 at 25 degrees C was calculated by applying a deduced equation. The interaction mechanism of the inclusion complex was discussed and the various factors affecting the inclusion process were examined in detail. It was found that an appropriate amount of cationic surfactant cetyltrimethylammonium bromide (CTAB) can remarkably enhance the fluorescence intensity of the supramolecular complex system. Based on the obtained results, a novel sensitive spectrofluorimetric method for the determination of lomefloxacin based on supramolecular complex was developed with a linear range of 0.01-3.0 microg ml-1 and a detection limit of 0.008 microg ml-1, for the first time. The method was applied for the determination of lomefloxacin in pharmaceutical preparations successfully.     

Preparation and property screening of the solid inclusion complex of norfloxacin with p-sulfonated calix[4]arene

The complexation of norfloxacin (NFLX) by p-sulfonated calix[4]arene (SC4A) in aqueous solution has been studied by fluorescence spectroscopy and 1H NMR spectroscopy. A 1:1 stoichiometry and a 8086 L mol(-1) stability constant of the NFLX-SC4A complex was obtained by spectrofluorometric titrations. The equimolar solid state inclusion complex of NFLX-SC4A was prepared by the co-precipitation method and then characterized by various techniques, including differential scanning calorimetry (DSC), X-ray powder diffractometry (XRD), Fourier-transform infrared analysis (FT-IR) and scanning electron microscopy (SEM). The experimental results of these chemical property screenings confirmed that NFLX and SC4A can form a stable host-guest complex in the solid state, and SC4A appears to function as a complexing and solubilizing agent for NFLX.     

Molecular recognition of amphiphilic p-sulfonatocalix[4]arene with organic ammoniums

The binding abilities and thermodynamic origin for the intermolecular complexation of two water-soluble calixarenes, p-sulfonatocalix[4]arene (SC4A) and 5,11,17,23-tetrasulfonato-25,26,27,28-tetrakis(n-butyl)-calix[4]arene (SC4A-Bu), with six organic cations: 1,4-diazabicyclo[2,2,2]octane (G1), 3,5,6,8,-tetrahydropyrazino[1,2,3,4-Imn][1,10]phenanthroline (G2), diquat (G3), paraquat (G4), 1-methylpyridin-1-ium (G5) and 1,3-dimethylimidazolium (G6), have been determined by means of isothermal titration calorimetry in aqueous solutions at pH 7.0, 298.15 K, and their binding modes have been investigated by NMR spectroscopy. The obtained results indicate that the binding modes of SC4A-Bu and SC4A change a little but their binding affinities show great difference, resulting from the distinguishable binding thermodynamics. The binding selectivity of G1 is up to 688 times for the SC4A/SC4A-Bu hosts, and SC4A-Bu prefers to include planer molecules of large π system with low electron density. The aggregation behaviours of SC4A-Bu before and after complexation with G3 were then investigated, showing that G3 is able to induce the aggregation of SC4A-Bu.     

Synthesis and characterization of a sensitive and selective Fe3+ fluorescent sensor based on novel sulfonated calix[4]arene‐based host‐guest complex

A novel fluorescent sensor was prepared from sulfonated calix[4]arene (SC4A) by the host-guest complexation method using the fluorescent dye rhodamine B (RB) as a structure-directing agent. The crystal structure of the host-guest complex (RB@(SC4A)₃) was confirmed by X-ray diffraction studies while its performance and sensing mechanism for metal ion pollutants were characterized using fluorescence and nuclear magnetic resonance spectroscopies. The results showed that RB@(SC4A)₃ had a triangular branch structure resulting from host-guest mediation of the interactions between the three SC4A host molecules and the three terminal groups of the guest molecule RB. The host-guest complex exhibited sensitive and selective sensing towards Fe³⁺ ions via a fluorescence quenching mechanism. The results indicated that RB@(SC4A)₃ could be a promising sensitive and selective fluorescent sensor for metal ion pollutants monitoring. It also provided new insights into the synthesis of calixarene-based host-guest complex.     

Reactivity of the metal-->BX3 dative sigma-bond: 1,2-addition reactions of the Fe-->BX3 moiety of the ferraboratrane complex [kappa4-B(mimBu t)3]Fe(CO)2

The ferraboratrane [kappa4-B(mim(Bu)t)3]Fe(CO)2 (mim(Bu)t = 2-mercapto-1-tert-butylimidazolyl), the first example of a complex which possesses a retrodative (i.e., metal-to-ligand) Fe-->B bond, is obtained via reaction of the tris(2-mercapto-1-tert-butylimidazolyl)hydroborato complex [Tm(Bu)t]FeCl with LiCH2SiMe3 followed by treatment with CO. Significantly, [kappa4-B(mim(Bu)t)3]Fe(CO)2 exhibits novel reactivity towards a variety of reagents that results in eradication of the Fe-->B bond via a formal 1,2-addition process and the formation of B-functionalized tris(mercaptoimidazolyl)borate derivatives, [XTm(Bu)t]FeY.     

In search of the [PhB(mu-N(t)Bu)2]2As. radical: experimental and computational investigations of the redox chemistry of group 15 bis-boraamidinates

DFT calculations for the group 15 radicals [PhB(mu-N(t)Bu)2]2M. (M = P, As, Sb, Bi) predict a pnictogen-centered SOMO with smaller contributions to the unpaired spin density arising from the nitrogen and boron atoms. The reactions of Li 2[PhB(mu-NR)2] (R = (t)Bu, Dipp) with PCl 3 afforded the unsolvated complex LiP[PhB(mu-N(t)Bu)2] 2 ( 1a) in low yield and ClP[PhB(mu-NDipp)2] (2), both of which were structurally characterized. Efforts to produce the arsenic-centered neutral radical, [PhB(mu-N (t) Bu) 2] 2As., via oxidation of LiAs[PhB(mu-N(t)Bu)2]2 with one-half equivalent of SO 2Cl 2, yielded the Zwitterionic compound [PhB(mu-N (t) Bu) 2As(mu-N(t)Bu)2B(Cl)Ph] (3) containing one four-coordinate boron center with a B-Cl bond. The reaction of 3 with GaCl3 produced the ion-separated salt, [PhB(mu-N(t)Bu)2] 2As (+)GaCl 4 (-) ( 4), which was characterized by X-ray crystallography. The reduction of 3 with sodium naphthalenide occurred by a two-electron process to give the corresponding anion [{PhB(mu-N(t)Bu)2} 2As] (-) as the sodium salt. Voltammetric investigations of 4 and LiAs[PhB(mu-N (t) Bu) 2] 2 ( 1b) revealed irreversible processes. Attempts to generate the neutral radical [PhB(mu-N(t)Bu)2] 2As. from these ionic complexes via in situ electrolysis did not produce an EPR-active species.     

Voltammetric studies on the reduction of polyoxometalate anions in ionic liquids

The electrochemical reduction of tetrabutylammonium salts of isostructural pairs of polyoxometalates [Bu4N]2[M6O19], [Bu4N]4[alpha-SiM12O40], and [Bu4N]4[alpha-S2M18O62] (M = Mo or W) has been investigated at glassy carbon electrodes in dissolved and surface-confined states in ionic liquids and other media. In the ionic liquid 1-n-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF(6)], between two and six reversible one-electron-transfer processes were detected. Detailed studies on the process [alpha-S2W18O62](4-/5-) in a range of ionic liquids, water, and conventional organic solvents (containing 0.1 M electrolyte) suggest that the polarity of the medium plays a key role in the determination of the reversible potential. Reduction processes involving very highly charged [alpha-S2W18O62](8-/9-/10-) species are strongly influenced by the purity of the medium.     

Anion-induced urea deprotonation

The urea-based receptor 1 (1-(7-nitrobenzo[1,2,5]oxadiazol-4-yl)-3-(4-nitrophenyl)urea, L--H), interacts with X- ions in MeCN, according to two consecutive steps: 1) formation of a hydrogen-bond complex [L--H...X]-; 2) deprotonation of L--H to give L- and [HX2]-, as shown by spectrophotometric and 1H NMR titration experiments. Step 2) takes place with more basic anions (fluoride, carboxylates, dihydrogenphosphate), while less basic anions (Cl-, NO2-, NO3-) do not induce proton transfer. On crystallisation from a solution containing L--H and excess Bu4NF, the tetrabutylammonium salt of the deprotonated urea derivative (Bu4N[L]) was isolated and its crystal and molecular structure determined.     

Hafnocene catalysts for selective propylene oligomerization: efficient synthesis of 4-methyl-1-pentene by beta-methyl transfer

A series of hafnocene complexes (eta5-C5Me4R1)(eta5-C5Me4R2)HfCl2 with [R1, R2] = [H, H] (1), [Me, H] (2), [Me, Me] (3), [Et, Me] (4), [(i)Pr, Me] (5), [SiMe(3), Me] (6), [(t)Bu, Me] (7), [(n)Bu, Me] (8), [(i)Bu, Me] (9), [Et, Et] (10), [(n)Bu, (n)Bu] (11), [(i)Bu, (i)Bu] (12) was tested as catalyst precursors for propylene oligomerization. Upon activation with methylaluminoxane or [Ph(3)C][B(C(6)F(5))(4)]/Al(i)Bu(3), complexes 2-4 and 8-12 catalyzed the dimerization of propylene to produce 4-methyl-1-pentene with selectivities ranging from 23.9 to 61.6 wt % in the product mixture. The selectivity was dependent on the nature of the substituents R(1) and R(2), with the highest value found for (eta5-C5Me4(i)Bu)2HfCl2 (12). Rapid deactivation was observed for 5-7, whereas (eta5-C5Me4H)2HfCl2 (1) polymerized propylene. 4-Methyl-1-pentene is proposed to form by repeated 1,2-insertion of propylene into the hafnocene methyl cation, followed by selective beta-methyl elimination. Detailed analysis of the byproduct distribution (isobutene, 1-pentene, 2-methyl-1-pentene, 2,4-dimethyl-1-pentene, 4-methyl-1-heptene, 4,6-dimethyl-1-heptene), determined by gas chromatography, was performed with the aid of a stochastic simulation involving rate constants for the propagation by insertion, beta-hydride elimination, and beta-methyl elimination. The rate of termination is dependent on the structure of the growing chain of the active species as well as on the bulkiness of the cyclopentadienyl ligands. The selectivity highly depends on the reaction conditions (pressure, temperature, concentration of methylaluminoxane). The rates of beta-methyl elimination leading to 4-methyl-1-pentene were proportional to propylene pressure for 2-4 and 8-10 but practically independent from propylene pressure for the sterically bulkier derivatives 11-12.     

Determination of ranitidine, nizatidine, and cimetidine by a sensitive fluorescent probe

A validated, simple, and sensitive fluorescence quenching method for the determination of ranitidine, nizatidine, and cimetidine in tablets and biological fluids is presented. This is the first single fluorescence method reported for the analysis of all three H(2) antagonists. The competitive reaction between the investigated drug and the palmatine probe for the occupancy of the cucurbit[7]uril (CB[7]) cavity was studied using spectrofluorometry. CB[7] was found to react with the probe to form a stable complex. The fluorescence intensity of the complex was also enhanced greatly. However, the addition of the drug dramatically quenched the fluorescence intensity of the complex. Accordingly, a new fluorescence quenching method for the determination of the studied drugs was established. The different experimental parameters affecting the fluorescence quenching intensity were studied carefully. At optimum reaction conditions, the rectilinear calibration graphs between the fluorescence quenching values (ΔF) and the medicament concentration were obtained in the concentration range of 0.04-1.9 μg mL(-1) for the investigated drugs. The limits of detection ranged from 0.013 to 0.030 μg mL(-1) at 495 nm using an excitation wavelength of 343 nm. The proposed method can be used for the determination of the three H(2) antagonists in raw materials, dosage forms and biological fluids.     

二邻巯基苯酚-苯甲酰肼合钼(Ⅳ)酸双三乙基亚铵三元固态配合物的合成及谱学特性

以(Bu₄N)₄Mo₈O₂₆为原料,以邻巯基苯酚和苯甲酰肼为配体,在甲醇中合成了未见报道的单核三元配合物二邻巯基苯酚-苯甲酰肼合钼(Ⅳ)酸双三乙基亚铵.通过元素分析、红外光谱、¹H NMR谱、电子光谱、差热-热重分析对化合物的性质进行了表征,发现它是无端基氧钼配合物,并提出了其可能结构.     

New cyanometalate building units: synthesis and characterization of [Re(CN)(7)]3- and [Re(CN)(8)]3-

Two new cyanorhenate complexes of potential utility in constructing magnetic and photomagnetic materials are reported. Reaction of (Bu4N)CN with [ReCl6]2- in acetonitrile affords yellow (Bu4N)3[Re(CN)7] (1), featuring the pentagonal bipyramidal complex [Re(CN)7]3-. The spectral and magnetic properties of 1 indicate that the complex has an S = 1/2 ground state with considerable anisotropy in the g tensor. In aqueous solution, 1 reacts with Mn2+ ions to generate the three-dimensional cyano-bridged solid [fac-Mn(H2O)3][cis-Mn(H2O)2][Re(CN)7].3H2O (2) containing diamagnetic [Re(CN)7]4-. Addition of KIO4 to the reaction solution, originally intended to prevent reduction of the rhenium during solid formation, instead yields white (Bu4N)3[Re(CN)8] (3). As crystallized in K3[Re(CN)8].2MeCN (4.2MeCN), the diamagnetic [Re(CN)8]3- complex adopts a nearly perfect square antiprismatic coordination geometry. In solution, this species behaves analogously to the isoelectronic [M(CN)8]4- (M = Mo, W) complexes, apparently converting to a dodecahedral geometry and photooxidizing under UV radiation to give paramagnetic [Re(CN)8]2-.     

New series of asymmetrically substituted Bis(1,2-dithiolato)-nickel(III) complexes exhibiting near IR absorption and structural diversity

The synthesis, structural characterization, and properties of a new series of asymmetrically substituted bis(dithiolene) nickel(III) compounds [Bu4N][Ni(Phdt)2] (1) (Phdt = 2-Phenyl-1,2-dithiolate), [Bu4N][Ni(NO2Phdt)2] (2) (NO2Phdt = 2-( p-nitrophenyl)-1,2-dithiolate), [Bu4N][Ni(FPhdt)2] (3) (FPhdt = 2-( p-fluorophenyl)-1,2-dithiolate), [Bu4N][Ni(ClPhdt)2] (4) (ClPhdt = 2-( p-chlorophenyl)-1,2-dithiolate), and [Bu4N][Ni(BrPhdt)2] (5) (BrPhdt = 2-( p-bromophenyl)-1,2-dithiolate) have been described. All complexes 1- 5 exhibit absorptions in the near-infrared region; the shift of these absorption bands can be tuned by the choice of the substituents on the relevant dithiolene moieties. The substituents on the dithiolene moiety are also responsible for their structural diversities. The nature of the substituents on the dithiolene moiety play an important role in tuning the redox potentials along this series. The nitro derivative (compound 2) exhibits several redox couples in its cyclic voltammogram in contrast to the other compounds in this series. The synthesis and characterization of two asymmetrically halogen substituted tetrathiafulvalene (TTF) derivatives 4,4'-bis(4-chlorophenyl)-tetrathiafulvalene ClPhTTF (6) and 4,4'-bis(4-bromophenyl)-tetrathiafulvalene (BrPhTTF) (7) have been described. One of these compounds has been structurally characterized. Iodine treatment of the monoanionic Ni(III) compound [Bu4N][Ni(ClPhdt)2] (4) results in the formation of a neutral Ni(IV) complex [Ni(ClPhdt)2] (8). All monoanionic compounds 1- 5 are Ni(III) complexes, as evidenced by electron spin resonance spectroscopy. Interestingly, strong Cl...Cl interactions are observed in the solid state structures of the chlorinated compounds 6 and 8. Finally, the structural features of compound [Ni(ClPhdt)2] (8) and the TTF derivative ClPhTTF (6) are compared based on their enormous structural similarities, and the neutral compound [Ni(ClPhdt)2] (8) is classed as the "an inorganic counterpart of TTF".     

Synthesis, structure and hydrosilylation activity of neutral and cationic rare-earth metal silanolate complexes

Rare-earth metal alkyl tri(tert-butoxy)silanolate complexes [Ln{mu,eta2-OSi(O(t)Bu)3}(CH2SiMe3)2]2 (Ln = Y (1), Tb (2), Lu (3)) were prepared via protonolysis of the appropriate tris(alkyl) complex [Ln(CH2SiMe3)3(thf)2] with tri(tert-butoxy)silanol in pentane. Crystal structure analysis revealed a dinuclear structure for with square pyramidal geometry at the yttrium centre. The silanolate ligand coordinates in an eta2-bridging coordination mode giving a 4-rung truncated ladder and non-crystallographic inversion centre. Addition of two equiv. of 12-crown-4 to a pentane solution of 1 or 3 respectively gave [Ln{OSi(O(t)Bu)(3)}(CH2SiMe3)2(12-crown-4)].12-crown-4 (Ln = Y (4), Lu (5)). Crystal structure analysis of 5 showed a slightly distorted octahedral geometry at the lutetium centre. The silanolate ligand adopts an eta(1)-terminal coordination mode, whilst the crown ether unit coordinates in an unusual kappa3-fashion. Reaction of 1-3 with [NEt3H]+[BPh4]- in thf yielded the cationic derivatives [Ln{OSi(O(t)Bu)3}(CH2SiMe3)(thf)4]+[BPh4]- (Ln = Y (6), Tb (7) and Lu (8)); coordination of crown ether led to compounds of the form [Ln{OSi(O(t)Bu)3}(CH2SiMe3)(L)(thf)n]+[BPh4]- (Ln = Y, Lu, L = 12-crown-4, n = 1 (9,10); Ln = Y, Lu, L = 15-crown-5, n = 0 (11,12)). Reaction of 1 with [NMe2PhH]+[B(C6F5)4]-, [Al(CH2SiMe3)3] or BPh3 in thf gave the ion pairs [Y{OSi(O(t)Bu)3}(CH2SiMe3)(thf)4]+[A]- ([A]- = [B(C6F5)4]- (13), [Al(CH2SiMe3)4]- (14), [BPh3(CH2SiMe3)]- (15)), whilst two equiv. [NMe2PhH]+[BPh4]- with 1 in thf produced the dicationic ion triple [Y{OSi(O(t)Bu)3}(thf)6]2+[BPh4]-2 (16). Crystal structure analysis revealed that 16 is mononuclear with pentagonal bipyramidal geometry at the yttrium centre. The silanolate ligand coordinates in an eta(1)-terminal fashion. All diamagnetic compounds have been characterized by NMR spectroscopy. 1, 3, 4, 6 and 13 were tested as olefin hydrosilylation pre-catalysts with a variety of substrates; 1 was found to be highly active in 1-decene hydrosilylation.     

Zinc complexes of anionic NPPN and NP(S)PN ligands and rearrangement to the isomeric NPNP and NP(S)NP ligands in mercury complexes

The lithium (imido)diphosphineimide Li(Et2O)[DippNPhP-P((n)Bu)PhNDipp] (1) (Dipp = 2,6-(i)Pr2C6H3) undergoes simple metathesis reactions with equimolar amounts of zinc halides, ZnCl2 and (t)BuZnBr, to give the respective N,N'-chelated complexes {Zn(micro-Cl)[DippNPhP-P((n)Bu)PhNDipp]}2 (2) and (t)BuZn[NDippPhP-P((n)Bu)PhNDipp] (3). In contrast, the reaction of two equivalents of complex 1 with HgCl2 affords the rearranged bis(imidodiphosphinoamine) complex, Hg[PhP([double bond, length as m-dash]NDipp)(micro-NDipp)P((n)Bu)Ph]2 (4), where the ligand acts as a P-centered anion. The (imido)diphosphineimide backbone of remains intact on oxidation with elemental sulfur to afford the lithium (imido)diphosphineimine sulfide complex, Li(Et2O)[DippNPhP(S)-P((n)Bu)PhNDipp] (6). Reactions of 6 with group 12 metal halides show similar behaviour to those of complex 1. The N,N' chelated metathesis products RZn[DippNPhP(S)-P((n)Bu)PhNDipp] (7, R = Cl; 8, R = (t)Bu) are obtained on reaction with ZnCl2 and (t)BuZnBr, respectively. Isomerization of the ligand backbone occurs on reaction of 6 with HgCl2 to form the homoleptic P,S-chelated mercury complex Hg[Ph(S)P(=NDipp)(micro-NDipp)P((n)Bu)Ph]2 (9). Complexes 2, 3, 4, 6, 8 and 9 have been characterized by X-ray crystallography.     

Study on the fluorescence behavior of p-sulfonated calix[4,6]arene in cationic surfactant cetyltrimethylammonium bromide solution and its analytical application

The fluorescence properties of p-sulfonated calix[4,6]arene (SCnA, n=4, 6) in cationic surfactant cetyltrimethylammonium bromide (CTAB) solution were investigated. It was found that the fluorescence intensity of SCnA could be enhanced markedly by an appropriate amount of CTAB. The results indicate the formation of complex between CTAB and SCnA at a 1:1 complex stoichiometry and their association constants were calculated by applying a deduced equation. Based on the obtained results, a new fluorimetric method has been developed for rapid determination of SCnA with a good linearity in the concentration range of 2x10(-7) to 7x10(-6)mol L-1.     

Synthesis,Properties, Structure and Reactivity of Sodium 2,3,4,5-Tetra- tert -butylcyclopentaphosphanide

The reaction between Na, t BuPCl 2 , and PCl 3 in thf gives Na[ cyclo -( t Bu 4 P 5 )] ( 1 ). 1 reacts with PCl 3 to yield ( cyclo - t Bu 3 P 4 ) t BuPCl ( 2 ), and with a proton source, such as HCl, NH 4 Cl, or t BuCl, to give cyclo - t Bu 4 P 5 H ( 3 ). The reaction of 1 with [MCl 2 (PRR' 2 ) 2 ] (M = Ni; R = R' = Et; M = Pd, Pt, R = Ph, R' = Me) gives [Ni{ cyclo -( t Bu 3 P 5 )}(PEt 3 ) 2 ] ( 4 ), [Pd{ cyclo -( t Bu 4 P 5 )} 2 ] ( 5 ), and [PtCl{ cyclo -( t Bu 3 P 4 ) t BuP}(PPhMe 2 )] ( 6 ). 1-6 were characterized by 31 P{ 1 H} NMR spectroscopy, and 1 and 4-6 were also characterized by X-ray crystallography.     

A convenient route to synthesize the fully conjugated bimetallic complex (Bu4N)2[tto[Ni(dmit)2]] (tto = tetrathiooxalate,C2S4(2-), and dmit = 1,3-dithiole-2-thione-4,5-dithiolate,C3S5(2-) and the crystal structure of a new crystal form

A novel route for the conversion of (Bu4N)2[Ni(dmit)2] to (Bu4N)2[tto[Ni(dmit)2]] is reported here. This provides a much more efficient way of synthesizing (Bu4N)2[tto[Ni(dmit)2]] than the literature method. During the process, the conversion of dmit2- to tto2- was realized for the first time. This new synthesis should facilitate further research on the conducting bimetallic complexes [C]x[tto[Ni(dmit)2]]. In addition, a new crystal form of (Bu4N)2[tto[Ni(dmit)2]]. In addition, a new crystal form of (Bu4N)2[tto[Ni(dmit)2]] was determined by X-ray crystallographic analysis.     

Palladium-catalyzed formylation of aryl bromides: elucidation of the catalytic cycle of an industrially applied coupling reaction

The first comprehensive study of the catalytic cycle of the palladium-catalyzed formylation of aryl bromides with synthesis gas (CO/H2, 1:1) is presented. The formylation in the presence of efficient (Pd/PR2(n)Bu, R = 1-Ad, (t)Bu) and nonefficient (Pd/P(t)Bu3) catalysts was investigated. The main organometallic complexes involved in the catalytic cycle were synthesized and characterized, and their solution chemistry was studied in detail. Comparison of stoichiometric and catalytic reactions using P(1-Ad)2(n)Bu, the most efficient ligand known for the formylation of aryl halides, led to two pivotal results: (1) The corresponding carbonylpalladium(0) complex [Pd(n)(CO)(m)L(n)] and the respective hydrobromide complex [Pd(Br)(H)L2] are resting states of the active catalyst, and they are not directly involved in the catalytic cycle. These complexes maintain the concentration of most active [PdL] species at a low level throughout the reaction, making oxidative addition the rate-determining step, and provide high catalyst longevity. (2) The product-forming step proceeds via base-mediated hydrogenolysis of the corresponding acyl complex, e.g., [Pd(Br)(p-CF3C6H4CO){P(1-Ad)2(n)Bu}]2 (8), under mild conditions (25-50 degrees C, 5 bar). Stoichiometric studies using the less efficient Pd/P(t)Bu3 catalyst resulted in the isolation and characterization of the first stable three-coordinated neutral acylpalladium complex, [Pd(Br)(p-CF3C6H4CO)(P(t)Bu3)] (10). Hydrogenolysis of 10 needed significantly more drastic conditions compared to that of dimeric 8. In the presence of amine base, complex 10 gave a catalytically inactive diamino acyl complex, which explains the low activity of the Pd/P(t)Bu3 catalyst formylation of aryl bromides.     

1-Borabenzonitrile (B-cyanoboratabenzene)

The reaction of 1-chloro-2-(trimethylsilyl)-1-boracyclohexa-2,5-diene with [(n)Bu(4)N]C≡N provides the 1-borabenzonitrile salt [(n)Bu(4)N][C(5)H(5)BC≡N] which in turn reacts with [Ru(4)(μ-Cl)(4)(η-C(5)Me(5))(4)] to afford the sandwich complex [Ru(η(6)-C(5)H(5)BC≡N)(η-C(5)Me(5))]. The bonding of 1-borabenzonitrile is discussed with recourse to crystallographic data for [(n)Bu(4)N][C(5)H(5)BC≡N] and [Ru(η(6)-C(5)H(5)BC≡N)(η-C(5)Me(5))].