New developments in the dye-doped polymer dispersed liquid crystals gratings: A review

In this study, the dye-doped polymer dispersed liquid crystals (PDLC) gratings techniques performed by the various research groups or being developed are briefly reviewed. Especially, the electrically switched diffraction and holographic gratings, have attained much attention by various research groups working in the PDLC-related display studies. The fabrication methodologies used for such grating texture, include like the conventional dye-doped PDLC grating, Azo-dye doped PDLC gratings, and lasing techniques etc., adopted for dye-doped PDLC gratings. The useful features and characteristics of their fabrication process of such gratings are discussed. Finally, some of the future perspectives on this particular research field are presented.     

Sacrificial layer microfluidic device fabrication methods

Over the past 15 years, research in the field of microfluidics has experienced rapid growth due to significant potential advantages such as low cost, short analysis times, and elimination of sources of contamination. Although etched and thermally bonded glass substrates have seen widespread use and offer solid performance, device fabrication still remains cumbersome. Recent advances in sacrificial layer microfabrication methods for microfluidics have overcome many disadvantages of conventional fabrication approaches. Phase-changing sacrificial layers have been implemented in making inexpensive and high-performance polymer microchips for electrophoretic analysis, protein focusing, and sample preconcentration. In addition, novel channel fabrication methods based on standard thin-film processes, which are readily integratable with microfabrication techniques used for electrical components, are being applied increasingly for the creation of microfluidic devices. These new sacrificial layer fabrication approaches will be instrumental in making low-cost and high-quality polymer microchips, and in interfacing electrical and fluidic systems on glass or semiconductor substrates.     

Recent Strategies in Fabrication of Gradient Hydrogels for Tissue Engineering Applications

Hydrogels are widely used as scaffold in tissue engineering field because of their ability to mimic the cellular microenvironment. However, mimicking a completely natural cellular environment is complicated due to the differences in various physical and chemical properties of cellular environments. Recently, gradient hydrogels provide excellent heterogeneous environment to mimic the different cellular microenvironments. To create hydrogels with an anisotropic distribution, gradient hydrogels have been widely developed by adopting several gradient generation techniques. Herein, the various gradient hydrogel fabrication techniques, including dual syringe pump systems, microfluidic device, photolithography, diffusion, and bio‐printing are summarized. As the effects of gradient 3D hydrogels with stems have been reviewed elsewhere, this review focuses principally on gradient hydrogel fabrication for multi‐model tissue regeneration. This review provides new insights into the key points for fabrication of gradient hydrogels for multi‐model tissue regeneration.     

Infrared multiphoton excitation: Energy distribution of reacting molecules from overtone excitation studies

A method is offered to estimate quantitatively the energy distribution of molecules reacting after being excited by multiphoton absorption of infrared radiation. The method is based on the comparison of the real time reaction kinetics obtained in the infrared multiphoton experiment with those observed upon excitation of a vibrational overtone. Results obtained for the dissociation of tetramethyldioxetane under low-pressure conditions are used as a demonstration.     

Theory of Multi-Photon Ionization of Atoms and Molecules

In this paper we present a density matrix formalism to treat one-photon ionization and multiphoton ionization of atoms and molecules in the presence of an external field. It is shown that Fano's results for one-photon ionization without an external field can easily be obtained from our formulation. For comparison, the Green's function method applied to multiphoton ionization of molecules is also presented.     

Fabrication of thermoset polyester microfluidic devices and embossing masters using rapid prototyped polydimethylsiloxane molds

Plastics are increasingly being used for the fabrication of Lab-on-a-Chip devices due to the variety of beneficial material properties, affordable cost, and straightforward fabrication methods available from a range of different types of plastics. Rapid prototyping of polydimethylsiloxane (PDMS) devices has become a well-known process for the quick and easy fabrication of microfluidic devices in the research laboratory; however, PDMS is not always an appropriate material for every application. This paper describes the fabrication of thermoset polyester microfluidic devices and masters for hot embossing using replica molding techniques. Rapid prototyped PDMS molds are convienently used for the production of non-PDMS polymeric devices. The recessed features in the cast polyester can be bonded to a second polyester piece to form an enclosed microchannel. Thermoset polyester can withstand moderate amounts of pressure and elevated temperature; therefore, the cast polyester piece also can be used as a master for embossing polymethylmethacrylate (PMMA) microfluidic systems. Examples of enclosed polyester and PMMA microchannels are presented, and we discuss the electroosmotic properties of both types of channels, which are important for analytical applications such as capillary electrophoresis.     

Thermoset polyester as an alternative material for microchip electrophoresis/electrochemistry

Microchip CE coupled with electrochemical detection (MCE-EC) is a good method for the direct detection of many small molecule analytes because the technique is sensitive and readily miniaturized. Polymer materials are being increasingly used with MCE due to their affordability and ease of fabrication. While PDMS has become arguably the most widely used material in MCE-EC due to the simplicity of microelectrode incorporation, it suffers from a lack of separation efficiency, lower surface stability, and a tendency for analyte sorption. Other polymers, such as poly(methylmethacrylate) (PMMA) and poly(carbonate) (PC), have higher separation efficiencies but require more difficult fabrication techniques for electrode incorporation. In this report, thermoset polyester (TPE) was characterized as an alternative material for MCE-EC. TPE microchips were characterized in their native and plasma oxidized forms and after coating with polyelectrolyte multilayers (PEMs). TPE provides higher separation efficiencies when compared to PDMS microchips, while still using simple fabrication protocols. In this work, separation efficiencies as high as 295,000 N/m were seen when using TPE MCE-EC devices. Furthermore, the EOF was higher and more consistent as a function of pH for both native and plasma-treated TPE than PDMS. Finally, TPE is amenable to modification using simple PEM coatings as another way to control surface chemistry and surface charge.     

Transition probabilities for coherent multiphoton absorption processes

The feasibility of coherent multiphoton propagation effects such as two-photon self-induced transparency is examined by calculating the coherent transition probabilities for a multiphoton process. For a two-photon excitation of a three-level system, periodic probability functions are obtained which increase smoothly as the intermediate state approaches resonance with the radiation field. The results for a coherent multiphoton excitation of a multilevel system are an extension of Rabi's “strong signal theory” for a one-photon excitation of a two-level system.     

Advances in the scaffolds fabrication techniques using biocompatible polymers and their biomedical application: A technical and statistical review

With the advancement in tissue engineering, researchers are working hard on new techniques to fabricate more advanced scaffolds from biocompatible polymers with enhanced porosity, appropriate mechanical strength, diverse shapes and sizes for potential applications in biomedical field in general and tissue engineering in particular. These techniques include electrospinning, solution blow spinning, centrifugal spinning, particulate leaching (salt leaching), freeze-drying, lithography, self-assembly, phase separation, gas foaming, melt molding, 3-D printing, fiber mesh and solvent casting. In this article we have summarized the scaffold’s fabrication techniques from biocompatible polymers that are reported so far, the recent advances in these techniques, characterization of the physicochemical properties of scaffolds and their potential applications in the biomedical field and tissue engineering. The article will help both newcomers and experts working in the biomedical implant fabrication to not only find their desired information in one document but also understand the fabrication techniques and the parameters that control the success of biocompatible polymeric scaffolds. Furthermore, a static analysis of the work published in all forms on the most innovative techniques is also presented. The data is taken from Scopus, restricting the search to biomedical fields and tissue engineering.     

Construction of microscale structures in enclosed microfluidic networks by using a magnetic beads based method

A large number of microscale structures have been used to elaborate flowing control or complex biological and chemical reaction on microfluidic chips. However, it is still inconvenient to fabricate microstructures with different heights (or depths) on the same substrate. These kinds of microstructures can be fabricated by using the photolithography and wet-etching method step by step, but involves time-consuming design and fabrication process, as well as complicated alignment of different masters. In addition, few existing methods can be used to perform fabrication within enclosed microfluidic networks. It is also difficult to change or remove existing microstructures within these networks. In this study, a magnetic-beads-based approach is presented to build microstructures in enclosed microfluidic networks. Electromagnetic field generated by microfabricated conducting wires (coils) is used to manipulate and trap magnetic beads on the bottom surface of a microchannel. These trapped beads are accumulated to form a microscale pile with desired shape, which can adjust liquid flow, dock cells, modify surface, and do some other things as those fabricated microstructures. Once the electromagnetic field is changed, trapped beads may form new shapes or be removed by a liquid flow. Besides being used in microfabrication, this magnetic-beads-based method can be used for novel microfluidic manipulation. It has been validated by forming microscale dam structure for cell docking and modified surface for cell patterning, as well as guiding the growth of neurons.     

Femtosecond laser-induced microstructures in glasses and applications in micro-optics

Femtosecond laser has been widely used in microscopic modifications to materials due to its ultra-short laser pulse and ultrahigh light intensity. When a transparent material e.g. glass is irradiated by a tightly focused femtosecond laser, the photo-induced reaction is expected to occur only near the focused part of the laser beam inside the glass due to the multiphoton processes. We observed various induced structures e.g. color center defects, refractive index change, micro-void and micro-crack, in glasses after the femtosecond laser irradiation. In this paper, we review the femtosecond laser induced phenomena and discuss the mechanisms of the observed phenomena. We also introduce the fabrication of various micro-optical components, e.g. optical waveguide, micro-grating, micro-lens, fiber attenuator, 3-dimensional optical memory by using the femtosecond laser-induced structures. The femtosecond laser will open new possibilities in the fabrication of micro-optical components with various optical functions.     

Inherent Impurities in Graphene/Polylactic Acid Filament Strongly Influence on the Capacitive Performance of 3D-Printed Electrode

Additive manufacturing or 3D-printing have become promising fabrication techniques in the field of electrochemical energy storage applications such as supercapacitors, and batteries. Of late, a commercially available graphene/polylactic acid (PLA) filament has been commonly used for Fused Deposition Modeling (FDM) 3D-printing in the fabrication of electrodes for supercapacitors and Li-ion batteries. This graphene/PLA filament contains metal-based impurities such as titanium oxide and iron oxide. In this study, we show a strong influence of inherent impurities in the graphene/PLA filament for supercapacitor applications. A 3D-printed electrode is prepared and subsequently thermally activated for electrochemical measurement. A deep insight has been taken to look into the pseudocapacitive contribution from the metal-based impurities which significantly enhanced the overall capacitance of the 3D-printed graphene/PLA electrode. A systematic approach has been shown to remove the impurities from the printed electrodes. This has a broad implication on the interpretation of the capacitance of 3D-printed composites.     

Phase sensitive demodulation in multiphoton microscopy.

Multiphoton laser scanning microscopy offers advantages in depth of penetration into intact samples over other optical sectioning techniques. To achieve these advantages it is necessary to detect the emitted light without spatial filtering. In this nondescanned (nonconfocal) approach, ambient room light can easily contaminate the signal, forcing experiments to be performed in absolute darkness. For multiphoton microscope systems employing mode-locked lasers, signal processing can be used to reduce such problems by taking advantage of the pulsed characteristics of such lasers. Specifically, by recovering fluorescence generated at the mode-locked frequency, interference from stray light and other ambient noise sources can be significantly reduced. This technology can be adapted to existing microscopes by inserting demodulation circuitry between the detector and data collection system. The improvement in signal-to-noise ratio afforded by this approach yields a more robust microscope system and opens the possibility of moving multiphoton microscopy from the research lab to more demanding settings, such as the clinic.     

Polymer microfabrication methods for microfluidic analytical applications

A growing number of microsystem technology (MST) applications, particularly in the field of microfluidics with its applications in the life sciences, have a need for novel fabrication methods which account for substrates other than silicon or glass. We present in this paper an overview of existing polymer microfabrication technologies for microfluidic applications, namely replication methods such as hot embossing, injection molding and casting, and the technologies necessary to fabricate the molding masters. In addition, techniques such as laser ablation and layering techniques are examined. Methods for bonding and dicing of polymer materials, which are necessary for complete systems, are evaluated.     

分子转动和激光脉冲对多光子激发控制的影响(英文)

用解析代数方法研究了分子转动和激光脉冲对双原子分子多光子激发控制的影响并推导得到不同转动通道下的分子振动激发几率的解析表达式.为了考察转动能级和考虑分子转动后与激光场夹角的变化对分子多光子振动激发和振动激发控制的影响,我们计算并比较了分子纯振动和加入分子转动两种情况,并分别给出了分子与极化激光场在不同取向角下三光子选择激发的图像.研究发现分子的转动能级对多光子非共振激发有修正作用,但是分子转动会降低多光子激发的选择性,而选择合适的激光脉冲形状有利于目标多光子激发控制的实现.文中还进一步讨论了激光脉冲初相位对分子多光子激发控制的影响,发现脉冲初相位对多光子激发过程有明显的调制作用.     

电动泵技术研究进展

电液动力学（EHD）研究的是在流体上施加电场后流体的流动。在微分析系统中,EHD的主要应用是电动泵（EKP）技术即电泳泵和电渗泵两个主要泵技术。这些独特的泵技术被广泛应用在推动极小截面的管道中化学和生物流体流动,管道尺寸从平方毫米到平方微米量级,甚至纳米通道量级。近年来,电渗泵出现了填充床、整体柱、平行多通道、纳米通道和微孔膜等各种新的形式,显示了其在微分析系统中的集成化和在毛细管液相色谱、流动注射分析和药物输送等应用研究中的潜力。本文对电动泵技术进行评述。     

Synthesemethoden für keramische Materialien. Hochtechnologiewerkstoffe

The new developments in the field of gas phase synthesis, synthesis from the condensed phases and solid‐state synthesis allowing for the fabrication of new ceramic materials for diverse technical applications have been reviewed. The Flame Spray Pyrolysis, aqueous and non‐aqueous sol‐gel techniques, hydro‐ and solvothermal methods, polymer pyrolysis route and high pressure techniques have been considered as synthesis methods with great technical potential.     

SU-8 as a structural material for labs-on-chips and microelectromechanical systems

Since its introduction in the nineties, the negative resist SU-8 has been increasingly used in micro- and nanotechnologies. SU-8 has made the fabrication of high-aspect ratio structures accessible to labs with no high-end facilities such as X-ray lithography systems or deep reactive ion etching systems. These low-cost techniques have been applied not only in the fabrication of metallic parts or molds, but also in numerous other micromachining processes. Its ease of use has made SU-8 to be used in many applications, even when high-aspect ratios are not required. Beyond these pattern transfer applications, SU-8 has been used directly as a structural material for microelectromechanical systems and microfluidics due to its properties such as its excellent chemical resistance or the low Young modulus. In contrast to conventional resists, which are used temporally, SU-8 has been used as a permanent building material to fabricate microcomponents such as cantilevers, membranes, and microchannels. SU-8-based techniques have led to new low-temperature processes suitable for the fabrication of a wide range of objects, from the single component to the complete lab-on-chip. First, this article aims to review the different techniques and provides guidelines to the use of SU-8 as a structural material. Second, practical examples from our respective labs are presented.     

Multiphoton excited fluorescence spectroscopy of biomolecular systems

Recent work on the emerging application of multiphoton excitation to fluorescence studies of biomolecular dynamics and structure is reviewed. The fundamental principles and experimental techniques of multiphoton excitation are outlined, fluorescence lifetimes, anisotropy and spectra in membranes, proteins, hydrocarbons, skin, tissue and metabolites are featured, and future opportunities are highlighted.     

Responsive photonic crystals

This Review summarizes recent developments in the field of responsive photonic crystal structures, including principles for design and fabrication and many strategies for applications, for example as optical switches or chemical and biological sensors. A number of fabrication methods are now available to realize responsive photonic structures, the majority of which rely on self-assembly processes to achieve ordering. Compared with microfabrication techniques, self-assembly approaches have lower processing costs and higher production efficiency, however, major efforts are still needed to further develop such approaches. In fact, some emerging techniques such as spin coating, magnetic assembly, and flow-induced self-assembly have already shown great promise in overcoming current challenges. When designing new systems with improved performance, it is always helpful to bear in mind the lessons learnt from natural photonic structures.