Numerical prediction of fiber motion in a branching channel flow of fiber suspensions

Fiber orientation and dispersion in the dilute fiber suspension that flows through a T-shaped branching channel are simulated numerically based on the slender-body theory. The simulated results are consistent qualitatively with the experimental data available in the literature. The results show that the spatial distribution of fibers is dependent on the fiber aspect ratio, but has no relation with the volume fraction of fiber. The content ratio of fibers near the upper wall increases monotonically with an increasing Re number, and the situation is reverse for the region near the bottom wall. The orientation of fibers depends on Re number, however, the function of fiber volume fraction and aspect ratio is negligible. The fibers near the wall and in the central region of the channel align along the flow direction at all times, but the fibers in the other parts of the channel tend to align along the flow direction only in the downstream region.The project supported by the National Natural Science Foundation of China (10372090) and Doctoral Program of Higher Education in China (20030335001)The English text was polished by Ron Marshall     

An experimental study of flow-induced fiber orientation and concentration distributions in a concentrated suspension flow through a slit channel containing a cylinder

Flow-induced fiber orientation and concentration distributions were measured in a concentrated fiber suspension (CFS) and a dilute one (DFS). The channel has a thin slit geometry containing a circular cylinder. In the previous work, many researchers have qualitatively studied fiber orientation and concentration distributions in injection-molded products of fiber-reinforced plastics. In the present work, however, they are quantitatively estimated by direct observation of fibers in the concentrated suspension flow. For the CFS, some fibers rotate in an expansion part between the channel wall and the circular cylinder, and the fiber orientation becomes almost random state. On the other hand, fibers are perfectly aligned along the flow direction owing to the elongational flow near the centerline downstream of the cylinder. The fiber concentration has a flat distribution except near the channel wall and the centerline. For the DFS a minimum in the fiber concentration distribution was clearly observed on the centerline, and two peaks beside the centerline and near the channel wall. This characteristic distribution is caused by the fiber-wall and fiber-cylinder interactions. It is found that the obstacle such as the circular cylinder in the channel significantly affects the fiber orientation downstream of the obstacle for the CFD, while it affects the fiber concentration distribution for the DFS.     

Numerical simulation of flow kinematics for suspensions containing continuously dispersed aspect ratio fibers

Fiber suspension flow and fiber orientation through a parallel-plate channel were numerically simulated for fiber suspensions including continuously dispersed aspect ratios from 10 to 50. In the simulations, both the fiber–fiber and fiber–wall interactions were not taken into account. A statistical scheme that proceeds by evaluating the orientation evolution of a large number of fibers from the solution of the Jeffery equation along the streamlines was confirmed to be a very useful and feasible method to accurately analyze the orientation distribution of fibers with continuously dispersed aspect ratios. For monodisperse suspensions with small-aspect-ratio fibers, flip-over or oscillation phenomenon of the orientation ellipsoid caused the wavy patterns of the velocity profile and the streamlines as well as the abrupt and complex variation of the shear stress and the normal stress difference near the channel wall as proven in one of our former works. On the other hand, continuous dispersions containing from small- to large-aspect-ratio fibers were able to induce smoother evolutions of the fiber orientation and the flow kinematics. In the processing of fiber composites, the length of suspended fibers is always continuously distributed because of fiber breakage during processing; thus, the smooth evolutions of the flow kinematics and the stress distribution can be attained.This paper was presented at the Annual Meeting of the European Society of Rheology, Grenoble, April 2005.     

Fiber suspension flow in a tapered channel: The effect of flow/fiber coupling

A numerical model for predicting the flow and orientation state of semi-dilute, rigid fiber suspensions in a tapered channel is presented. The effect of the two-way flow/fiber coupling is investigated for low Reynolds number flow using the constitutive model of Shaqfeh and Fredrickson. An orientation distribution function is used to describe the local orientation state of the suspension and evolves according to a Fokker–Plank type equation. The planar orientation distribution function is determined along streamlines of the flow and is coupled with the fluid momentum equations through a fourth-order orientation tensor. The coupling term accounts for the two-way interaction and momentum exchange between the fluid and fiber phases. The fibers are free to interact through long range hydrodynamic fiber–fiber interactions which are modeled using a rotary diffusion coefficient, an approach outlined by Folgar and Tucker. Numerical predictions are made for two different orientation states at the inlet to the contraction, namely a fully random and a partially aligned fiber orientation state. Results from these numerical predictions show that the streamlines of the flow are altered and that velocity profiles change from Jeffery–Hamel, to something resembling a plug flow when the fiber phase is considered in the fluid momentum equations. This phenomenon was found when the suspension enters the channel in either a pre-aligned, or in a fully random orientation state. When the suspension enters the channel in an aligned orientation state, fiber orientation is shown to be only marginally changed when the two-way coupling is included. However, significant differences between coupled and uncoupled predictions of fiber orientation were found when the suspension enters the channel in a random orientation state. In this case, the suspension was shown to align much more quickly when the mutual coupling was accounted for and profiles of the orientation anisotropy were considerably different both qualitatively and quantitatively.     

Numerical simulation of flow kinematics and fiber orientation for multi-disperse suspension

The development of flow kinematics and fiber orientation distribution from the parabolic velocity profile and isotropic orientation at the channel inlet was computed in multi-disperse suspension flow through a parallel plate channel and their predictions were compared with those of mono- and bi-disperse suspensions. A statistical scheme (orientations of a large number of fibers are evaluated from the solution of the Jeffery equation along the streamlines) was confirmed to be very useful and feasible method to analyze accurately the orientation distribution of fibers in multi-disperse fiber suspension flow as well as mono- and bi-dispersions, instead of direct solutions of the orientation distribution function of fibers or the evolution equation of the orientation tensor which involves a closure equation. It was found that the flow kinematics and the fiber orientation depend completely on both the fiber aspect-ratio and the fiber parameter for multi-disperse suspension when the fiber–fiber and fiber-wall interactions are neglected. Furthermore, the addition of large aspect-ratio fibers as well as an increase in the fiber parameter related to the large aspect-ratio fibers could suppress the complex velocity field and stress distributions which are observed in suspensions containing small aspect-ratio fibers. From a practical point of view, therefore, the mechanical and physical properties of fiber composites should be improved with an increase in the volume fraction of large aspect-ratio fibers.     

Orientation distribution of fibers and rheological property in fiber suspensions flowing in a turbulent boundary layer

A model relating the translational and rotational transport of orientation distribution function （ODF） of fibers to the gradient of mean ODF and the dispersion coefficients is proposed to derive the mean equation for the ODE Then the ODF of fibers is predicted by numerically solving the mean equation for the ODF together with the equations of turbulent boundary layer flow. Finally the shear stress and first normal stress difference of fiber suspensions are obtained. The results, some of which agree with the available relevant experimental data, show that the most fibers tend to orient to the flow direction. The fiber aspect ratio and Reynolds number have significant and negligible effects on the orientation dis- tribution of fibers, respectively. The additional normal stress due to the presence of fibers is anisotropic. The shear stress of fiber suspension is larger than that of Newtonian solvent, and the first normal stress difference is much less than the shear stress. Both the additional shear stress and the first normal stress difference increase with increasing the fiber concentration and decreasing fiber aspect ratio.     

Numerical simulation and visualization of fiber suspension in a turbulent round jet

The turbulent properties of the fiber suspension in a turbulent round jet are numerically simulated and visualized, and some of the results are compared with the experimental data. The effects of the Reynolds number, fiber volume fraction, and aspect ratio are analyzed. The results show that the fiber injection in the flow has a delay effect on the streamwise velocity decay along the jet axis, and such an effect becomes more obvious with the increases in the fiber volume fraction and aspect ratio and the decrease in the Reynolds number. The flow with fibers shows an increase in the streamwise velocity along the radial direction, and the increase magnitude is directly proportional to the fiber volume fraction and aspect ratio and inversely proportional to the Reynolds number. The presence of fibers makes the turbulent kinetic energy and Reynolds stress increase, and the extent increases with the fiber volume fraction, Reynolds number, and fiber aspect ratio.     

Characteristics of fiber suspension flow in a rectangular channel

Velocity profile of fiber suspension flow in a rectangular channel is measured by pulsed ultrasonic Doppler velocimetry (PUDV), and the effect of fiber concentration and Reynolds number on the shape of the velocity profile is investigated. Five types of flow behavior are observed when fiber concentration increases or flow rate decreases progressively. The turbulent velocity profiles of fiber suspension can be described by a correlation with fiber concentration, nl³, and Reynolds number, Re as the main parameters. The presence of fiber in the suspension will reduce the turbulence intensity and thus reduce the turbulent momentum transfer. On the other hand, fibers in the suspension have the tendency to form fiber networks, which will increase the momentum transfer. The relative contribution of these two types of momentum flux will determine the final shape of the velocity profile.     

On translational and rotational relative velocities of fibers and fluid in a turbulent channel flow with a backward-facing step

A dilute fiber suspension in a turbulent channel with a backward-facing step is investigated by means of Feature Tracking. Its combination with a phase-discrimination methodology, which is described in detail, allows simultaneous and separate measurement of carrier and dispersed phases velocity fields, the orientation and rotation rate of fibers as well as the fiber–fluid translational and rotational slip velocities. The patterns of fibers concentration, angular velocity and the probability distribution of fibers velocity appear to be dominated by the mechanical interactions with the wall and the local high shear rather than by near-wall turbulent structures. The translational slip velocity obtained from instantaneous data shows that fibers move faster than the surrounding fluid inside the buffer layer, the velocity gap reducing gradually when approaching the channel centerline. On the other hand, the rotational slip profile suggests a gradual decoupling of the translational and rotational dynamics. Downstream of the step, the excess of streamwise velocity displayed by fibers is still observed and extends in the free-shear region, whereas the rotation rate slip decreases at a relatively short distance from the step, as the effect of the wall presence fades away.     

Simulations of fibre orientation in dilute suspensions with front moving in the filling process of a rectangular channel using level-set method

The simulation of fibre orientation in dilute suspension with front moving is carried out using the projection and level-set methods. The motion of fibres is described using the Jeffery equation, and the contribution of fibres to the flow is accounted for by the configuration-field method. The dilute suspension of short fibres in Newtonian fluids is considered. The governing Navier–Stokes equation for the fluid flow is solved using the projection method with finite difference scheme, while the fibre-related equations are directly solved with the Runge–Kutta method. In the present study for fibres in dilute suspension flow for injection molding, the effects of various flow and material parameters on the fibre orientation, the velocity distributions and the shapes of the leading flow front are found and discussed. Our findings indicate that the presence of fibre motion has little influence on the front shape in the ranges of fibre parameters studied at the fixed Reynolds number. Influence of changing fibre parameters only causes variation of front shape in the region near the wall, and the front shape in the central core area does not vary much with the fibre parameters. On the other hand, the fibre motion has strong influence on the distributions of the streamwise and transverse velocities in the fountain flow. Fibre motion produces strong normal stress near the wall which leads to the reduction of transversal velocity as compared to the Newtonian flow without fibres, which in turn, leads to the increased streamwise velocity near the wall. Thus, the fibre addition to the flow weakens the strength of the fountain flow. The Reynolds number has also displayed significant influence on the distribution of the streamwise velocity behind the flow front for a given fibre concentration. It is also found that the fibre orientation is not always along the direction of the velocity vector in the process of mold filling. In the region of the fountain flow, the fibre near the centreline is more oriented across the streamwise direction compared to that in the region far behind the flow front. This leads to the fact that the fibre near the centreline in the region of fountain flow is more extended along the transverse direction. As the fibre orientation in the suspension flow and the shape of the flow front have great bearing on the quality of the product made from injection molding, this study has much implications for engineering applications. These results can also be useful in other fields dealing with fibre suspensions.     

Flow-driven orientation dynamics of semiflexible fiber systems

We study the flow-induced orientation dynamics of semiflexible fibers in dilute fiber suspensions. Starting from the equations of motion for a two-rod model of flexible fibers in Stokes flow, the Smoluchowski equation for a connected monomer orientation distribution function is derived. We then obtain a set of equations for the time dependence of the first and second moments of the orientation distribution function, thus extending the Folgar Tucker equations for short rigid fiber suspensions to flexible fiber suspensions. The resulting generalized equations for the orientation dynamics of a suspension of flexible fibers are solved for simple channel flow. It is shown that all qualitative effects of bending and straightening of fibers and their influence on the orientation of flexible fibers are captured within our model. A scalar measure for the distribution of bending in a flow is introduced, which allows to detect the degree of bending of fibers. Paper was presented at the 3rd Annual Rheology Conference, AERC 2006, April 27–29, 2006, Crete, Greece.     

Structure and properties of sheared fiber suspensions with mechanical contacts

The properties of fiber suspensions are highly sensitive to the suspension microstructure. In dilute or semi-dilute suspensions, nL²d≪1, the fibers' orientation distribution is controlled by hydrodynamic interactions among the fibers. However, direct mechanical contacts among the fibers play an important role in semi-concentrated suspensions, nL²d=O(1). Here, n is the number of fibers per unit volume, L is the fiber length and d is the fiber diameter. We have performed dynamic simulations of fiber suspensions including contact forces that prevent any two fibers from passing through one another. Collisions between the fibers cause them to flip more frequently in the shear flow, leading to a spread of the orientation distribution away from the flow direction. Both this increased orientational dispersion and the direct stress transmitted through the contacts enhance the shear viscosity of the suspension significantly. The contacts also give rise to normal stress differences. The results of the simulation are compared with experiments and the relative importance of contacts and hydrodynamic interactions is discussed.     

Direct simulation of turbulent flow and heat transfer in a channel. Part I: Smooth walls

Interest in the use of supercomputers for the direct numerical calculation of turbulence prompts the development of efficient numerical techniques so that calculation at higher Reynolds numbers might be made. This paper presents an efficient pseudo-spectral technique, similar to but different from others that have recently appeared, for the calculation of momentum and heat transfer to a constant-property, turbulent fluid in a two-dimensional channel with walls at different, uniform temperature. The code uses no empiricism, although periodic boundary conditions are used for fluctuating quantities in the streamwise and spanwise directions. Calculations were made for a Prandtl number of 0·72 and Reynolds number based on friction velocity and channel half-height of 180 or 2800 based on channel half-height and average velocity. Calculations of mean velocity profile, turbulence intensities, skewness, flatness, Reynolds stress and eddy diffusivity of heat near a wall compare favourably with experimental results. Representative contour plots of the temperature field near the wall and of the spanwise and streamwise two-point velocity correlations are given. Deficiencies are that the calculation requires many hours on a fast computer with a large high-speed memory and that the grid size in each direction for appropriate resolution is approximately proportional to the square of the Reynolds number and to the Prandtl number raised to some power greater than one.     

Stability analysis in spatial mode for channel flow of fiber suspensions

Different from previous temporal evolution assumption, the spatially growing mode was employed to analyze the linear stability for the channel flow of fiber suspensions. The stability equation applicable to fiber suspensions was established and solutions for a wide range of Reynolds number and angular frequency were given numerically . The results show that, the flow instability is governed by a parameter H which represents a ratio between the axial stretching resistance of fiber and the inertial force of the fluid. An increase of H leads to a raise of the critical Reynolds number, a decrease of corresponding wave number, a slowdown of the decreasing of phase velocity , a growth of the spatial attenuation rate and a diminishment of the peak value of disturbance velocity. Although the unstable region is reduced on the whole, long wave disturbances are susceptible to fibers.     

Investigation of fiber motion near solid boundaries in simple shear flow

In this paper, fiber motion near a planar wall was investigated using a planar shear flow apparatus. Fibers were placed (one at a time) perpendicular to the flow direction at various locations throughout the flow field. The location and orientation of each fiber versus time was measured, using an image processing system, until the fiber aligned with the flow direction. When the centroid of the fiber was located at distances greater than a fiber length from the wall, Jeffery's equations governing particle motion were verified. For distances less than a fiber length and greater than a fiber diameter from the wall, the fiber experienced an increased rate of rotation. In this regime, the motion of the fiber could be described by Jeffery's equations if an increased effective shear rate was used. The effective shear rate was found to increase logarithmically with decreasing separation distance. The wall effect was higher for longer aspect ratio fibers and was also a function of orientation; fibers oriented perpendicular to the wall rotated faster than those oriented parallel to the wall at the same separation distance. Once the fiber aligned with the flow direction, it ceased to rotate within the field of view. In this orientation, the wall had a stabilizing effect on the fiber. In efforts to relate the increase in shear rate to the aspect ratio of the fiber and the separation distance between the fiber and a solid wall, a translation model based on the work of De Mestre and Russel was explored. This model allows one to quantify the increase in shear rate experienced by the fiber due to the presence of a wall or obstruction in the flow field. However, the model has its limitations and care should be taken when applying this model outside its realm of validity. When compared to experimental data, the translation model provides a very good estimate of the increased shear rate experienced by the fiber when it is located less than 2/3 of a fiber length from a planar wall. Received: 20 April 2000 Accepted: 28 September 2000     

Linear stability of two-dimensional steady flow in wavy-walled channels

Linear stability of fully developed two-dimensional periodic steady flows in sinusoidal wavy-walled channels is investigated numerically. Two types of channels are considered: the geometry of wavy walls is identical and the location of the crest of the lower and upper walls coincides (symmetric channel) or the crest of the lower wall corresponds to the furrow of the upper wall (sinuous channel). It is found that the critical Reynolds number is substantially lower than that for plane channel flow and that when the non-dimensionalized wall variation amplitude is smaller than a critical value (about 0.26 for symmetric channel, 0.28 for sinuous channel), critical modes are three-dimensional stationary and for larger , two-dimensional oscillatory instabilities set in. Critical Reynolds numbers of sinuous channel flows are smaller for three-dimensional disturbances and larger for two-dimensional disturbances than those of symmetric channel flows. The disturbance velocity distribution obtained by the linear stability analysis suggests that the three-dimensional stationary instability is mainly caused by local concavity of basic flows near the reattachment point, while the critical two-dimensional mode resembles closely the Tollmien–Schlichting wave for plane Poiseuille flow.     

Direct numerical simulation of low Reynolds number flows in an open‐channel with sidewalls

A direct numerical simulation of low Reynolds number turbulent flows in an open‐channel with sidewalls is presented. Mean flow and turbulence structures are described and compared with both simulated and measured data available from the literature. The simulation results show that secondary flows are generated near the walls and free surface. In particular, at the upper corner of the channel, a small vortex called inner secondary flows is simulated. The results show that the inner secondary flows, counter‐rotating to outer secondary flows away from the sidewall, increase the shear velocity near the free surface. The secondary flows observed in turbulent open‐channel flows are related to the production of Reynolds shear stress. A quadrant analysis shows that sweeps and ejections are dominant in the regions where secondary flows rush in toward the wall and eject from the wall, respectively. A conditional quadrant analysis also reveals that the production of Reynolds shear stress and the secondary flow patterns are determined by the directional tendency of the dominant coherent structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Research on the motion of particles in the turbulent pipe flow of fiber suspensions

The motion of fibers in turbulent pipe flow was simulated by 3-D integral method based on the slender body theory and simplified model of turbulence. The orientation distribution of fibers in the computational area for different Re numbers was computed. The results which were consistent with the experimental ones show that the fluctuation velocity of turbulence cause fibers to orient randomly. The orientation distributions become broader as the Re number increases. Then the fluctuation velocity and angular velocity of fibers were obtained. Both are affected by the fluctuation velocity of turbulence. The fluctuation velocity intensity of fiber is stronger at longitudinal than at lateral, while it was opposite for the fluctuation angular velocity intensity of fibers. Finally, the spatial distribution of fiber was given. It is obvious that the fiber dispersion is strenghened with the increase of Re numbers.     

Numerical study of particulate suspension flow through wavy‐walled channels

The particulate suspension flow in a channel whose walls describe a travelling wave motion is examined numerically. A perturbation method is employed and the primitive variables are expanded in a series with the wall amplitude as the perturbation parameter. The boundary conditions are applied at the mean surface of the channel and the first‐order perturbation quantities are numerically determined by solving the governing system of ordinary differential equations by shooting technique. The present approach does not impose any restriction on the Reynolds number of the flow and the wave number and frequency of the wavy‐walled channel, although it is limited by the linear analysis. The wall shear stress and the positions of flow separation and reattachment points are computed and the influence of the volume fraction density of the particles is examined. The variations of velocity and pressure of the particulate suspension flow with frequency of excitation are also presented. Copyright © 2005 John Wiley & Sons, Ltd.     

Fluid flow and heat transfer in a two-dimensional wavy channel

A numerical study is presented for the laminar fully developed flow and heat transfer in a two-dimensional wavy channel. The effects of the geometry, Reynolds and Prandtl number on the flow field and heat transfer are investigated. The channel is characterized by a wavy wall, heated at uniform heat flux, and an opposite wall, being plane and adiabatic. The extent of the wall waviness and the distance between the channel walls are found to significantly affect the streamlines contours as well as the heat transfer coefficients. Comparisons with the straight channel, in the same flow rate and heat transfer conditions, have been performed. Pressure drop of the wavy channel is found to be always larger than the value characteristic of a straight channel, while heat transfer performance decreases or increases depending on the values of the parameters (geometry, Reynolds and Prandtl numbers).