rf reactive co-sputtered Au-Ag alloy nanoparticles in SiO2 thin films

We have studied formation of Au-Ag alloy nanoparticles in sputtered SiO₂ thin films. Silica thin films containing Au-Ag nanoparticles were deposited on quartz substrates using rf reactive magnetron co-sputtering technique. The films heat-treated in reducing Ar + H₂ atmosphere at different temperatures. They were analyzed by using UV-vis spectrophotometry, atomic force microscopy and X-ray photoelectron spectroscopy (XPS) methods for their optical, surface morphological as well as structural and chemical properties. The optical absorption of the Au-Ag alloy nanoparticles illustrated one plasmon resonance absorption peak located at 450 nm between the absorption bands of pure Au and Ag nanoparticles at 400 and 520 nm, respectively, for the thin films annealed at 800 °C. XPS results showed that the alloys were in metallic state, and they had a greater tendency to lose electrons as compared to their corresponding monometallic state. Using lateral force microscopy analysis, we have found that the alloy particles were uniformly distributed on the surface with grain size of about 20 nm.     

Nanocomposite ZnO/Au formation by pulsed laser irradiation

The ZnO/Au nanocomposite formation involves synthesis of Au and ZnO colloidal solutions by 532 nm pulse laser ablation of metal targets in deionized water followed by laser irradiation of the mixed colloidal solution. The transmission electron microscope (TEM) and high-resolution transmission electron microscope (HRTEM) images show evolution of spherical particles into ZnO/Au nanonetworks with irradiation time. The formation mechanism of the nanonetwork can be explained on the basis of near resonance absorption of 532 nm irradiation by gold nanoparticles which can cause selective melting and fusion of gold nanoparticles to form network. The ZnO/Au nanocomposites show blue shift in the ZnO exciton absorption and red shift in the Au plasmon resonance absorption due to interfacial charge transfer.     

Nonlinear optical properties of Au/ZnO nanoparticle arrays

The triangular-shaped Au/ZnO nanoparticle arrays were fabricated on fused quartz substrate using nanosphere lithography. The structural characterization of the Au/ZnO nanoparticle arrays was investigated by atomic force microscopy. The absorption peak due to the surface plasmon resonance of Au particles at the wavelength of about 570 nm was observed. The nonlinear optical properties of the nanoparticle arrays were measured using the z-scan method at a wavelength of 532 nm with pulse duration of 10 ns. The real and imaginary part of third-order nonlinear optical susceptibility, Re χ⁽³⁾ and Im χ⁽³⁾, were determined to be 1.15 × 10⁻⁶ and −5.36 × 10⁻⁷ esu, respectively. The results show that the Au/ZnO nanoparticle arrays have great potential for future optical devices.     

The effect of preadsorbed K on the size distribution of Au nanoparticles on TiO2(1 1 0) surface

The effect of K on the morphology of Au nanoparticles deposited on TiO₂(1 1 0) surface is investigated by STM-STS and AES methods. For comparison, the enhanced concentration of oxygen defect sites generated by Ar⁺ bombardment was also studied. It was found that both the K additive and the oxygen defect sites induce a pronounced decrease in the average size of the Au nanoparticles evolved at 320 K. On the clean TiO₂(1 1 0) the average size of Au particles is 4.3 nm at approximately monolayer coverage of gold, while in the presence of K or oxygen vacancies this value decreased to 2.5 nm. In spite of the reduced average diameter detected at room temperature, the mean size of the Au nanoparticles increased significantly from 2.5 nm up to 7 nm on the effect of annealing at 500-700 K for K precoverages of 0.3-1 ML. For the clean and the Ar⁺ pretreated TiO₂(1 1 0) surfaces the mean size of the Au particles changed only slightly on the effect of the same thermal treatments.     

Formation of gold nanoparticles in heat-treated reactive co-sputtered Au-SiO2 thin films

In this work, formation of gold nanoparticles in radio frequency (RF) reactive magnetron co-sputtered Au-SiO₂ thin films post annealed at different temperatures in Ar + H₂ atmosphere has been investigated. Optical, surface topography, chemical state and crystalline properties of the prepared films were analyzed by using UV-visible spectrophotometry, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and X-ray diffractometry (XRD) techniques, respectively. Optical absorption spectrum of the Au-SiO₂ thin films annealed at 800 °C showed one surface plasmon resonance (SPR) absorption peak located at 520 nm relating to gold nanoparticles. According to XPS analysis, it was found that the gold nanoparticles had a tendency to accumulate on surface of the heat-treated films in the metallic state. AFM images showed that the nanoparticles were uniformly distributed on the film surface with grain size of about 30 nm. Using XRD analysis average crystalline size of the Au particles was estimated to about 20 nm.     

Optical features of the gold nanoparticles deposited on ITO substrates

We have performed firstly studies of the photoinduced second order susceptibilities in the Au nanoparticles (NP) A, B and C under simultaneous influence of the bicolor 1064 nm and bicolor laser treatment (1064 nm 10 ns pulsed laser with pulse power densities 532 nm 10 ns laser treatment and the cw 300 mW 532 nm SHG coherent laser beams. We have studied three types of samples possessing irregular and different dense parameters of the Au NP deposited on the ITO substrate. We have found that the maximal bicolor (1064 nm and 532 nm) stimulated optical second harmonic generation for the 10 ns pulse duration was observed for the samples possessing irregular Au NP deposited on the ITO. We have performed studies of the photoinduced second order susceptibilities in the Au NP under simultaneous influence of the bicolor 1064 nm and bicolor laser treatment (1064 nm 10 ns pulsed laser with pulse power densities 532 nm 10 ns laser treatment and the cw 300 mW 532 nm SHG coherent laser beams). We have found that during the 15-20 min of the cw treatment there occur the principal changes in the absorption maxima. These maxima indicate on the occurrence of the additional absorption nearby the 308 nm and 310 nm and 345 nm spectral bands. The later are caused by the occurrence of the trapping levels in the border between the ITO substrate and the Au nanoparticles.     

Rapid synthesize of gold nanoparticles by microwave irradiation method and its application as an optical limiting material

We present rapid synthesis of gold nanoparticles by microwave irradiation method. Sample with average particle size 7.7 nm is obtained from TEM. Linear and nonlinear optical studies of the prepared samples are discussed. Reverse saturable absorption (RSA) at longitudinal surface plasmon resonance (SPR) in gold nanoparticles (Au NPs) have been observed using Z-scan and transient absorption techniques with 532 nm laser pulses. Such RSA behavior makes Au NPs an ideal candidate for optical limiting applications.     

Effects of post-thermal annealing temperature on the optical and structural properties of gold particles on silicon suboxide films

In this work, silicon suboxide (SiO_x) thin films were deposited using a RF magnetron sputtering system. A thin layer of gold (Au) with a thickness of about 10 nm was sputtered onto the surface of the deposited SiO_x films prior to the thermal annealing process at 400 °C, 600 °C, 800 °C and 1000 °C. The optical and structural properties of the samples were studied using scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR) and optical transmission and reflection spectroscopy. SEM analyses demonstrated that the samples annealed at different temperatures produced different Au particle sizes and shapes. SiO_x nanowires were found in the sample annealed at 1000 °C. Au particles induce the crystallinity of SiO_x thin films in the post-thermal annealing process at different temperatures. These annealed samples produced silicon nanocrystallites with sizes of less than 4 nm, and the Au nanocrystallite sizes were in the range of 7-23 nm. With increased annealing temperature, the bond angle of the Si-O bond increased and the optical energy gap of the thin films decreased. The appearance of broad surface plasmon resonance absorption peaks in the region of 590-740 nm was observed due to the inclusion of Au particles in the samples. The results show that the position and intensity of the surface plasmon resonance peaks can be greatly influenced by the size, shape and distribution of Au particles.     

Size-dependent single electron tunneling effect in Au nanoparticles

We investigated single electron tunneling (SET) behavior of dodecanethiol-coated Au nanoparticles of two different sizes (average sizes are 5 nm and 2 nm) using nanogap electrodes, which have a well-defined gap size, at various temperatures. The Coulomb staircases and the Coulomb gap near-zero bias voltage caused by the suppression of the tunneling electrons due to the Coulomb blockade effect were observed in the current-voltage (I-V) curves of both sizes of nanoparticles at a low temperature (10 K). At room temperature, the Coulomb gap was observed only in the I-V curve of the smaller nanoparticles. This result indicates that the charging energy of the smaller nanoparticles is enough to overcome the thermal energy at room temperature. This suggests that it is possible to operate the SET devices at room temperature using the smaller nanoparticles as a Coulomb island.     

Plasmonics: Absorption and scattering of light of non-straight ordered array of Au rings

In this paper, Au nanorings in a SiO₂ substrate have been utilized to design a plasmonic waveguide with lower losses and perfect energy coupling. Our recommended structure consists of a chain of dozen Au nanorings with a given intercenter space between them going on resonance, if a beam with specific wavelength is launched in the input area of the waveguide. Nanoring has an extra degree of freedom in its geometry and have a preferable tunability in comparison to other shapes of nanoparticles (e.g. nanospheres). It is shown that a modified plasmon waveguide structure can be utilized at optical communication band (λ = 1550 nm), in optical integrated devices. Red-shifted of localized surface plasmon resonance (LSPR) has been considered as a fundamental condition to have a maximum of optical response at λ = 1550 nm. Cross-sectional depictions of field propagation through the structure are displayed in order to show the absorption and scattering of light by particles. Ultimately, transmitted power ratio is computed for the structure to clear-cutting its characteristics.     

Silver nanostructure arrays abundant in sub-5 nm gaps as highly Raman-enhancing substrates

Two types of highly Raman-enhancing arrays substrates were fabricated using anodic aluminum oxide (AAO) templates by controlling the AAO template temperature and evaporated silver thickness during e-beam evaporating: complex patterned Ag nanoparticle arrays abundant in sub-5 nm gaps (type I); hexagonal Ag nanopore arrays (type II). The surface enhanced Raman scattering (SERS) enhancement factors (EF) of both substrates are estimated experimentally to exceed 10⁵, especially that of type I reaches 10⁷ due to the existence of numerous sub-5 nm gaps. The simulation using finite-difference time-domain (FDTD) method confirmed that gap effect has significantly improved the substrates’ SERS activity.     

Magnetic properties and microstructure study of high coercivity Au/FePt/Au trilayer thin films

High-coercivity Au(60 nm)/FePt(δ nm)/Au(60 nm) trilayer samples were prepared by sputtering at room temperature, followed by post annealing at different temperatures. For the sample with δ=60 nm, L1₀ ordering transformation occurs at 500 °C. Coercivity (H_c) is increased with the annealing temperature in the studied range 400–800 °C. The H_c value of the trilayer films is also varied with thickness of FePt intermediate layer (δ), from 27 kOe for δ=60 nm to a maximum value of 33.5 kOe for δ=20 nm. X-ray diffraction data indicate that the diffusion of Au atoms into the FePt L1₀ lattice is negligible even after a high-temperature (800 °C) annealing process. Furthermore, ordering parameter is almost unchanged as δ is reduced from 60 to 15 nm. Transmission electron microscope (TEM) photos indicate that small FePt Ll₀ particles are dispersed amid the large-grained Au. We believe that the high coercivity of the trilayer sample is attributed to the small and uniform grain sizes of the highly ordered FePt particles which have perfect phase separation with Au matrix.     

Synthesis and characterization of zinc oxide nanoparticles by laser ablation of zinc in liquid

We report formation of colloidal suspension of zinc oxide nanoparticles by pulsed laser ablation of a zinc metal target at room temperature in different liquid environment. We have used photoluminescence, atomic force microscopy and X-ray diffraction to characterize the nanoparticles. The sample ablated in deionized water showed the photoluminescence peak at 384 nm (3.23 eV), whereas peaks at 370 nm (3.35 eV) were observed for sample prepared in isopropanol. The use of water and isopropanol as a solvent yielded spherical nanoparticles of 14-20 nm while in acetone we found two types of particles, one spherical nanoparticles with sizes around 100 nm and another platelet-like structure of 1 μm in diameter and 40 nm in width. The absorption peak of samples prepared in deionized water and isopropanol are seen to be substantially blue shifted relative to that of the bulk zinc oxide due to the strong confinement effect. The technique offers an alternative for preparing the nanoparticles of active metal.     

High-magnetic-moment multifunctional nanoparticles for nanomedicine applications

Multifunctional FeCo nanoparticles with narrow size distribution (less than 8% standard deviation) were fabricated by a novel physical vapor nanoparticle-deposition technique. The size of magnetic nanoparticles was controlled in the range from 3 to 100 nm. The shape of nanoparticles was controlled to be either spherical or cubic. The particles had a high specific magnetization of 226 emu/g at low saturation field, which is much higher than the currently commercialized iron oxide nanoparticles. Core–shell-type Co(Fe)–Au nanoparticles were produced by the same technique. They combined the high moment of the Co(Fe) core with the plasmonic feature of a Au shell.     

Gold nanostructures on chemically reinforced PDMS microwell arrays

This paper describes a facile strategy for fabricating arrays of two- and three-dimensional gold nanostructures using PDMS-infiltrated polystyrene (PS) colloidal crystals. PDMS molding of colloidal crystal, gold vapor deposition, and subsequent calcination of PS produced gold thin layers over hexagonal PDMS microwell arrays with hemispherical air-voids of approximately 140 nm on glass substrates. Vapor deposition of perfluoroalkylsilane thin layers improved the thermal stability of the colloidal template over 100 °C, providing a route to preparation of hollow architectures with gold thin layers supported by PDMS nanostructures. Surface modification of the PDMS using poly(allylamine hydrochloride) induced two-dimensional colloidal crystals of PS and PMMA spheres through electrostatic interactions. Particle aggregation of 13 nm gold nanoparticles in the PDMS microwells demonstrated a surface plasmon resonance band red-shifted to 810 nm, in comparison with that on the flat surface at 720 nm.     

Oxidation and reduction of rough and flat Au surfaces

Very recently, we have shown that the oxidation pattern of very small (<0.7 nm in particle height) and larger Au nanoparticles are dissimilar, i.e. lager particles form Au(III) species upon atomic oxygen exposures, whereas this was not found for the smaller Au nanoparticles. In the present work, we found that the oxidation pattern of a flat Au surface is analogous to those of the larger Au nanoparticles, whereas a rough surface shows a similar oxidation pattern as those of the smaller particles. This result confirms that an increase of the number of undercoordinated atoms of smaller nanoparticles should be responsible for different oxidation patterns. The oxygen species formed on flat Au surfaces can readily react with CO to CO₂, whereas the oxygen species of the rough Au surface is mostly inert to the CO-oxidation, also in agreement with the results for supported Au nanoparticles.     

Au/TiO2/Ru(0 0 0 1) model catalysts and their interaction with CO

Au/TiO₂/Ru(0 0 0 1) model catalysts and their interaction with CO were investigated by scanning tunneling microscopy and different surface spectroscopies. Thin titanium oxide films were prepared by Ti deposition on Ru(0 0 0 1) in an O₂ atmosphere and subsequent annealing in O₂. By optimizing the conditions for deposition and post-treatment, smooth films were obtained either as fully oxidized TiO₂ or as partly reduced TiO_x, depending on the preparation conditions. CO adsorbed molecularly on both oxidized and reduced TiO₂, with slightly stronger bonding on the reduced films. Model catalyst surfaces were prepared by depositing submonolayer quantities of Au on the films and characterized by X-ray photoelectron spectroscopy and scanning tunneling microscopy. From X-ray photoelectron spectroscopy, a weak interaction between the Au and the TiO₂ substrate was found. At 100 K CO adsorption occurred on both the TiO₂ film and on the Au nanoparticles. CO desorbed from the Au particles with activation energies between 53 and 65 kJ/mol, depending on the Au coverage. If the Au deposit was annealed to 770 K prior to CO exposure, the CO adsorption energy decreased significantly. STM measurements revealed that the Au particles grow upon annealing, but are not encapsulated by TiO_x suboxides. The higher CO adsorption energy observed for smaller Au coverages and before annealing is attributed to a significantly stronger interaction of CO with mono- and bilayer Au islands, while for higher particles, the adsorption energy becomes more bulk-like. The implications of these effects on the known particle size effects in CO oxidation over supported Au/TiO₂ catalysts are discussed.     

Element-specific hard X-ray micro-magnetometry of magnetic modifications in Co–Pt dots fabricated by ion etching

We developed a micro-magnetometry with a 2.5 μm spatial resolution based on micro X-ray magnetic circular dichroism (XMCD) technique in order to study magnetic properties of dot arrays for bit-patterned media. This micro-magnetometer was applied to the magnetic characterization of Co–Pt dot arrays fabricated by ion beam etching. As the dot size became small, the intensity of XMCD drastically decreased for dots fabricated by Ga-focused ion beam. This suggested that the dot edges were damaged magnetically by implantation of Ga ions. The damaged width of the dot edge was estimated to be about 13 nm from the decrease in XMCD intensities. This damaged edge width agreed with the ion-implanted area estimated by Monte-Carlo simulation. The less-damaged effect of Ar ion etching was verified by the XMCD measurement of Co–Pt dots with diameter of 20 and 70 nm. It was concluded that ions with inertness, lower energy and smaller atomic number should be used to fabricate dot arrays with an areal density of 1 Tbit/in².     

Magnetic field heating study of Fe-doped Au nanoparticles

Fe-doped Au nanoparticles are ideal for biological applications over magnetic oxides due to their conjugation chemistry, optical properties, and surface chemistry. We present an AC magnetic field heating study of 8 nm Fe-doped Au nanoparticles which exhibit magnetic behavior. Magnetic heating experiments were performed on stable aqueous solutions of the nanoparticles at room temperature. The nanoparticles exhibit magnetic field heating, with a specific absorption rate (SAR) of 1.84 W/g at 40 MHz and H=100 A/m. The frequency dependence of the heating follows general trends predicted by power loss equations and is similar to traditional materials.     

A comparative STM study of Ru nanoparticles deposited on HOPG by mass-selected gas aggregation versus thermal evaporation

Scanning tunneling microscopy was used to compare the morphologies of Ru nanoparticles deposited onto highly-oriented graphite surfaces using two different physical vapour deposition methods; (1) pre-formed mass-selected Ru nanoparticles with diameters between 2 nm and 15 nm were soft-landed onto HOPG surfaces using a gas-aggregation source and (2) nanoparticles were formed by e-beam evaporation of Ru films onto HOPG. The particles generated by the gas-aggregation source are round in shape with evidence of facets resolved on the larger particles. Annealing these nanoparticles when they are supported on unsputtered HOPG resulted in the sintering of smaller nanoparticles, while larger particles remained immobile. Nanoparticles deposited onto sputtered HOPG surfaces were found to be stable against sintering when annealed. The size and shape of nanoparticles deposited by e-beam evaporation depend to a large extent on the state of the graphite support and the temperature. Ru deposition onto unsputtered HOPG is characterised by bimodal growth with large flat particles formed on the substrate terraces and smaller diameter particles aligned along the substrate steps. Evaporation onto sputtered HOPG results in the formation of 2 nm round particles with a narrow size distribution. Finally, thermal deposition onto both sputtered and unsputtered HOPG at 660 °C results in larger particles showing a flat Ru(0 0 0 1) top facet.