Application of citrate-stabilized gold-coated ferric oxide composite nanoparticles for biological separations

Gold-coated magnetic nanoparticles were synthesized with size ranging from 15 to 40 nm using sodium citrates as the reducing agent. Oxidized magnetites (Fe₃O₄) fabricated by co-precipitation of Fe²⁺ and Fe³⁺ in strong alkaline solution were used as magnetic cores. The structures of gold (Au) shell and magnetic core (Au–Fe) were studied by transmission electron microscopy (TEM) image and energy dispersive spectroscopy (EDS) spectrum. Results from high-resolution X-ray diffraction (HR XRD) show that the Au–Fe oxide nanoparticles have a face-centered cubic shape with the crystalline faces of {1 1 1}. The Au-coated magnetic nanoparticles exhibited a surface plasmon resonance peak at 528 nm. The nanoparticles are well dispersed in distilled water. A 3000 G permanent magnet was successfully used for the separation of the functionalized nanoparticles. Magnetic properties of the nanoparticles were determined by magnetic force microscope (MFM) in nanometric resolution and vibrating sample magnetometer (VSM). Magnetic separation of biological molecules using Au-coated magnetic oxide composite nanoparticles was examined after attachment of protein immunoglobulin G (IgG) through electrostatic interactions. Using this method, separation was achieved with a maximum yield of 35% at an IgG concentration of 400 ng/ml.     

Magnetic nanoparticles as building blocks for high-performance magnetic materials

We report on the magnetic behaviour of films of Fe nanoparticles deposited from the gas phase with sizes in the range 2–3 nm embedded in Ag and Co matrices and Co nanoparticles of the same size embedded in Ag matrices. Magnetometry measurements, using a VSM, of very low volume fraction (1–2%) assemblies of Fe and Co in Ag show perfect superparamagnetism and enable us to confirm that the size distribution of the particles in the matrix is the same as that of the free particles prior to deposition. The hysteresis loops at 2 K, which is below the blocking temperature, show that the particles have a uniaxial anisotropy that is randomly oriented in three dimensions with the Co nanoparticles having a much higher anisotropy than the Fe particles. The soft magnetic behaviour of pure Fe and Co nanoparticle films with no matrix is well described by a random anisotropy model and is consistent with the formation of a correlated super-spin glass (CSSG) characteristic of amorphous materials. The Co nanoparticle films appear to have a lower random anisotropy than the Fe ones in contrast to the behaviour observed for the isolated particles. Films of Fe nanoparticles embedded in Co matrices, whose saturation magnetization exceeds the Slater–Pauling curve, also show magnetic behaviour consistent with a CSSG. At high volume fractions, the films of Fe nanoparticles embedded in Co matrices behave almost identically to films of pure Co nanoparticles.     

Preparation,characterization and magneto-optical investigations of electrodeposited Co/Au films

Au/Co(4–8 ML)/Au single magnetic layers and Au(8 ML)/Co(4 ML)/Au(8 ML)/Co(8 ML)/Au bilayer were sequentially grown by electrodeposition on an Au(1 1 1) buffer layer electrodeposited on Si(1 1 1). The technique used in this work provides full control on the structure and the chemical composition of the different layers (no alloying) as well as on the chemistry at interfaces. scanning tunneling microscopy (STM) and atomic force microscopy (AFM) imaging and X-ray diffraction measurements show that atomically flat continuous Co(0 0 0 1) layers (4–8 ML) can be grown in epitaxy with the Au(1 1 1) substrate and that the 2 nm-thick spacer is also a continuous Au(1 1 1) layer. The Co ultrathin layers (4 and 8 ML) exhibit perpendicular magnetic anisotropy. The lateral magnetic homogeneity and magnetization reversal process have been investigated by scanning magneto-optical Kerr effect (MOKE) magnetometry and global Kerr microscopy. The correlation between magnetization switching behaviour in each layer of the Co-bilayer stack has been evidenced from in-depth sensitive MOKE measurements and microscopy. The strong coupling observed between the two Co layers is attributed to magnetostatic interaction at domain wall boundaries.     

Growth of nano Co encapsulated in carbon-shell

Nanostructured cobalt is one of the key elements in catalysis and therapeutic drug delivery. To design and prepare nanosize-controllable cobalt, a better understanding of its growth mechanism is essential. Growth of Co nanoparticles encapsulated in carbon-shell (Co@C) during temperature-programmed carbonization of the Co²⁺-β-cyclodextrin (CD) complex at 363–573 K was, therefore, studied by in situ synchrotron small-angel X-ray scattering and X-ray absorption near edge structure spectroscopy. The carbon-shell having a thickness of about 2 nm can prevent the core Co from being aggregated and oxidized. A relatively slow reduction of Co(II) to Co is observed at 393–423 K (stage I) prior to a particle growth transition-state possessing Co of 2.2 nm in diameter at 423–483 K. At 483–513 K (stage II), an increasing Co(II) reduction rate coupled with a rapid fusion and coalescence of Co nanoparticles is found. The average growth rates of Co at stages I and II are about 27 and 98 atoms/min, respectively. The most-probable particle diameter of the ripened Co is 5.9 nm. The carbon-shell can be removed by steam reforming to yield the Co nanoparticles. This work also exemplifies the possible temperature-controllable growth of Co@C, especially in the Co size range of 2–6 nm in diameter.     

Ni–Zn–Sm nanopowder ferrites: Morphological aspects and magnetic properties

Ni–Zn ferrites have been widely used in components for high-frequency range applications due to their high electrical resistivity, mechanical strength and chemical stability. Ni–Zn ferrite nanopowders doped with samarium with a nominal composition of Ni_0.5Zn_0.5Fe_2−xSm_xO₄ (x=0.0, 0.05, and 0.1 mol) were obtained by combustion synthesis using nitrates and urea as fuel. The morphological aspects of Ni–Zn–Sm ferrite nanopowders were investigated by X-ray diffraction, nitrogen adsorption by BET, sedimentation, scanning electron microscopy and magnetic properties. The results indicated that the Ni–Zn–Sm ferrite nanopowders were composed of soft agglomerates of nanoparticles with a high surface area (55.8–64.8 m²/g), smaller particles (18–20 nm) and nanocrystallite size particles. The addition of samarium resulted in a reduction of all the magnetic parameters evaluated, namely saturation magnetization (24–40 emu/g), remanent magnetization (2.2–3.5 emu/g) and coercive force (99.3–83.3 Oe).     

Epitaxial growth of Co(0 0 0 1)hcp/Fe(1 1 0)bcc magnetic bi-layer films on SrTiO3(1 1 1) substrates

Co(0 0 0 1)_hcp/Fe(1 1 0)_bcc epitaxial magnetic bi-layer films were successfully prepared on SrTiO₃(1 1 1) substrates. The crystallographic properties of Co/Fe epitaxial magnetic bi-layer films were investigated. Fe(1 1 0)_bcc soft magnetic layer grew epitaxially on SrTiO₃(1 1 1) substrate with two type variants, Nishiyama–Wasserman and Kurdjumov–Sachs relationships. An hcp-Co single-crystal layer is obtained on Ru(0 0 0 1)_hcp interlayer, while hcp-Co layer formed on Au(1 1 1)_fcc or Ag(1 1 1)_fcc interlayer is strained and may involve fcc-Co phase. It has been shown possible to prepare Co/Fe epitaxial magnetic bi-layer films which can be usable for patterned media application.     

Effect of addition of planetary milled Gd-211 on the microstructures and superconducting properties of air-processed single grain Gd–Ba–Cu–O/Ag bulk superconductors

Planetary milling technique has been a very promising way to obtain bulk superconductors with very high critical current density, J_c, albeit a detail characterisation of milled secondary phase precursor powders in particular has not been reported to date. Hence we report systematic studies of the effect of addition of planetary milled Gd₂BaCuO₅ (Gd-211) on the final microstructures and superconducting properties of air-processed Gd–Ba–Cu–O/Ag bulk samples. Average size of Gd-211 precursor particles, which were planetary milled with 1.0 mm ZrO₂ beads, has been observed to decrease significantly from 1.03 μm to 0.52 μm with increasing milling duration. Besides the size distribution of milled Gd-211 was narrow compared to that of the reference powder. A small amount of Zr was detected, however, in the milled Gd-211 powder by the inductively coupled plasma-optical emission spectroscopy (ICP-OES) and its content was increased with increasing milling period, which led to an inhomogeneous bulk microstructure. Significantly, the average size of Gd-211 particles milled for 45 min has been observed to decrease from 0.73 μm to 0.48 μm without severe contamination of Zr when the diameter of the beads were reduced from 1.0 mm to 0.3 mm. Trapped magnetic field of single grain Gd–Ba–Cu–O/Ag bulk sample with 32 mm in diameter prepared from almost Zr free Gd-211 fine particles recorded over 1.5 T at 77 K, which was almost 1.3 times greater than that of the reference sample. Nevertheless the repulsive force of both bulk samples showed around 57 N at a gap of zero between the sample surface and SmCo₅ permanent magnet.     

Synthesis by sol–gel process,structural and optical properties of nanoparticles of zinc oxide doped vanadium

We report the elaboration of vanadium-doped ZnO nanoparticles prepared by a sol–gel processing technique. In our approach, the water for hydrolysis was slowly released by esterification reaction followed by a supercritical drying in ethyl alcohol. Vanadium doping concentration of 10 at.% has been investigated. After treatment in air at different temperatures, the obtained nanopowder was characterised by various techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and photoluminescence (PL). Analysis by scanning electron microscopy at high resolution shows that the grain size increases with increasing temperature. Thus, in the case of thermal treatment at 500 °C in air, the powder with an average particle size of 25 nm shows a strong luminescence band in the visible range. The intensity and energy position of the obtained PL band depends on the temperature measurement increase. The mechanism of this emission band is discussed.     

Needle-like domain structure in Co films deposited on Mo (1 1 0)

Magnetization reversal processes and domain structures have been studied in Mo(1 1 0)/Co(0 0 0 1)/Au(1 1 1) structures grown by molecular beam epitaxy on monocrystalline (11–20) sapphire substrates. Wedge-shaped samples with different Co thickness gradients relative to the Mo [0 0 1] direction were fabricated. Observation of the domain structure was performed at room temperature using Kerr microscopy in a Co thickness range varying from 5 to 50 nm, where the magnetization is oriented in the plane of the sample. A Co thickness-dependent coercivity field was determined through analysis of the domain wall position during the reversal process. A preferential orientation of magnetic domain walls was found, with the domains being needle-like. The orientation, as well as the size of the needles, depends on the Co thickness and the orientation of the magnetic field applied in the sample plane.     

Magnetic properties of HITPERM-type alloys at high temperature

(Fe,Co)–Zr,Hf)–Cu–B (HITPERM-type) alloys with variable Hf, Zr and Co content were isothermally crystallised at 500–650 °C for 1 h, and the optimum nanocrystallisation temperature was selected on the basis of the minimum coercive field at room temperature. The quasistatic hysteresis loops were measured at temperature from 20 to 650 °C. Subsequently, the optimally annealed alloys were subjected to long-term annealing at 500, 550 and 600 °C. Working temperature of 600°C is too high for the investigated alloys to maintain stable magnetic properties. Temperature of 550 or 500 °C permits the material to be magnetically stable for a long period. The magnetic hysteresis loops recorded for the nanocrystalline alloys, where Fe:Co ratio is close to 1 and refractory metals content is 7 at.%, prove that coercive field increases slightly with temperature, but remains in the range of 20–40 A/m (depending on the alloy composition) from 20 to 550 °C. This proves that the investigated alloys, after optimisation of chemical composition, may be suitable for high temperature use.     

MeV Au ion induced modifications at Co/Si interface

We report on room temperature MeV Au ion induced modifications at the Co/Si interfaces. Nanometers size thin film of Co and Si were grown by ultra high vacuum (UHV) electron beam evaporation technique on Si(1 1 1) surface and were irradiated by 1.5 MeV Au²⁺ ions at a fluence of 5 × 10¹⁴ ions cm⁻². High-resolution transmission electron microscopy (HRTEM) along with energy filter imaging technique has been employed to study the formation of Co-Si alloy at the interface. Formation of such surface alloy has been discussed in the light of ion-matter interaction in nanometer scale regime.     

Magnetic binary nanofillers

Magnetic binary nanofillers containing multiwall carbon nanotubes (MWCNT) and hercynite were synthesized by Chemical Vapor Deposition (CVD) on Fe/AlOOH prepared by the sol–gel method. The catalyst precursor was fired at 450 °C, ground and sifted through different meshes. Two powders were obtained with different particle sizes: sample A (50–75 μm) and sample B (smaller than 50 μm). These powders are composed of iron oxide particles widely dispersed in the non-crystalline matrix of aluminum oxide and they are not ferromagnetic. After reduction process the powders are composed of α-Fe nanoparticles inside hercynite matrix. These nanofillers are composed of hercynite containing α-Fe nanoparticles and MWCNT. The binary magnetic nanofillers were slightly ferromagnetic. The saturation magnetization of the nanofillers depended on the powder particle size. The nanofiller obtained from powder particles in the range 50–75 μm showed a saturation magnetization 36% higher than the one formed from powder particles smaller than 50 μm. The phenomenon is explained in terms of changes in the magnetic environment of the particles as consequence of the presence of MWCNT.     

Green photoluminescence from highly oriented ZnO thin film for photovoltaic application

We report here the fabrication of ZnO nanoparticles embedded on glass substrate by sol–gel and spin coating technique. Transmission electron microscope images revealed that the thin film is composed of ZnO nanoparticles. X-ray diffraction data confirms that the fabricated ZnO nanoparticles have hexagonal unit cell structure. The ZnO nanocrystals of the thin film are oriented along the c-axis of the hexagonal unit cell. UV–vis absorption spectroscopy shows that the absorption occurring at 373 nm in the ZnO thin film. The band gap was calculated from the absorption data and found to be 3.76 eV. This band gap enhancement occurs due to size effect in the nanoscale regime. Room temperature photoluminescence spectrum shows strong green emission at 530 nm owing to the singly ionized oxygen vacancy. This green emission was further investigated by annealing the thin film at different temperature. This singular green emission will be very useful in optoelectronic and nanophotonic devices.     

Fabrication and surface transformation of FePt nanoparticle monolayer

The monolayer of FePt nanoparticles with the mean size of ∼4 nm was fabricated on a glass substrate by the Langmuir––Blodgett (LB) technology. The monolayer of FePt nanoparticles has a smooth surface and a high density structure as shown by the AFM image. The array structure of FePt nanoparticles on the surface of the film is clearly with a cubic symmetry in appropriate condition. Small-angle X-ray diffraction (SXRD) measurement of multilayer structure for the FePt nanoparticles has indicated that the superlattices consist of well-defined smooth layers. The transfer of nanoparticle layers onto a solid substrate surface was quite efficient for the first few layers, exhibiting a proportional increase of optical absorption in the UV–vis range. This results potentially opens up a new approach to the long-range ordered array of FePt nanoparticles capped by organic molecules on substrate and provide a promising thin film, which may exhibit the excellent ultra-high density magnetic recording properties.     

Influence of acid catalysts on the structural and magnetic properties of nanocrystalline barium ferrite prepared by sol–gel method

BaFe₁₂O₁₉ powders with nanocrystalline size were prepared by sol–gel techniques. Nitric, hydrochloric, acetic and stearic acid were used to improve the magnetic properties. Amorphous gels were formed with Fe/Ba molar ratio of 10.5. Then powders were obtained by subsequent heat treatment at 800–1000 °C for 1 h. Barium ferrite powder was also synthesized by solid state reaction at 1210 °C. X-ray diffraction, scanning electron microscopy and transmission electron microscopy (TEM) experiments were conducted to evaluate structural properties of the samples. The value of the effective magnetic susceptibility was measured. The results show that the magnetoplumbite structure was formed in all of the powders. The TEM observation showed that the minimum particle size (20 nm) was produced with the stearic acid catalyst. The highest value of the effective magnetic susceptibility was achieved also using stearic acid.     

Synthesis and characterization of magnetic Fe/CNTs composites with controllable Fe nanoparticle concentration

Fe/CNTs composites, with different concentrations of Fe nanoparticles (NPs) on carbon nanotube (CNT) surfaces, were successfully fabricated via a facile solvothermal method. The lengths of CNTs are up to 10 μm and the mean diameter of the Fe nanoparticles is about 25 nm. The structures, composition and magnetic properties of the Fe/CNTs were characterized by XRD, FTIR, FE-SEM, TEM and PPMS. We found that the concentrations of Fe nanoparticles depositing on the CNTs could be controlled by adjusting the initial mass ratio of ferrocene to CNTs. The Fe/CNTs composites display good ferromagnetic properties at room temperature, with a saturation magnetization of 125 emu/g-Fe and a coercivity of 276 Oe. The Curie temperature of the sample is about 1038 K, slightly lower than that (1043 K) of the bulk iron.     

Effect of the bath pH on the electrodeposition of nanocrystalline Pd–Co alloys and their magnetic properties

The effect of the bath pH on the electrodeposition of nanocrystalline Pd–Co alloys and on their magnetic properties was studied. The pH practically did not affect the alloy composition. Conversely, the pH showed a significant influence on the shape and size of crystallites. Two different crystallites morphology were observed depending on the bath pH. A crystallite size ranging from 18.2 to 30 nm was obtained from X-ray diffractometry (XRD) patterns using the Scherrer's method. Also from the XRD patterns the lattice strain percentage was calculated and correlated with the residual stress, which probably originated during the film electrodeposition on the substrate. Some alloy magnetic properties showed small variations. In contrast, high and unexpected coercivities were obtained reaching a maximum of 1.69 kOe at pH 5.5. The high coercivity values were attributed to the presence of residual stress at the film–substrate interface, which increased as the bath pH and crystallite size decrease, both of them contributing simultaneously to increase in coercivity.     

1 × 4 optical multiplexer based on the self-collimation effect of 2D photonic crystal

In this paper, a novel 1 × 4 optical multiplexer (OMUX) based on the two dimensional photonic crystal embed cascaded Mach–Zehnder interferometer (MZI) employing self-collimation effect was proposed and its performance were numerically demonstrated. The 1 × 4 OMUX consists of four beam splitters and five mirrors. Light propagates in the OMUX employing self-collimation effect. The theoretical transmission spectra at different output ports of OMUX were analyzed with the theory of light interference. Then they were investigated with the finite-difference time-domain (FDTD) simulation technique. The simulation results indicate the cascaded Mach–Zehnder interferometer can work as a 1 × 4 optical multiplexer by selecting path length in the structure properly. For the drop wavelength 1550 nm, the free spectral range of the OMUX is about 24 nm, which almost covers the whole optical communication C-band window. The presented device that has no only a compact size but also a high output efficiency, may have practical applications in photonic integrated circuits.     

Ion dependence of magnetic anisotropy in MFe2O4 (MFe,Co, Mn) nanoparticles synthesized by high-temperature reaction

The influence of different M²⁺ cations on the effective magnetic anisotropy of systems composed of MFe₂O₄ (M=Fe, Co and Mn) nanoparticles was investigated. Samples were prepared by the high-temperature (538 K) solution phase reaction of Fe (acac)₃, Co (acac)₂ and Mn (acac)₂ with 1,2 octanodiol in the presence of oleic acid and oleylamine. The final particles are coated by an organic layer of oleic acid that prevents agglomeration. Transmission electron microscopy (TEM) images show that particles present near spherical form and a narrow grain size distribution, with mean diameters in the range of 4.5–7.6 nm. Powder samples were analyzed by ac susceptibility and Mössbauer measurements, and K_eff for all samples was evaluated using both techniques, showing a strong dependence on the nature of the divalent cation.     

Evolution of phase,texture, microstructure and magnetic properties of Fe–Cr–Co–Mo–Ti permanent magnets

Magnetic phase evolution, crystallographic texture, microstructure and magnetic properties of Fe–28Cr–15Co–3.5Mo–1.8Ti alloy have been investigated by X-ray diffractometry, scanning transmission electron microscopy and magnetometry techniques as a function of processing conditions. Heat treatment conditions for obtaining optimum textural, microstructural and magnetic properties have been established by the experimentations. The Goss {110}〈001〉 and cube type {001}〈010〉 textures have been developed in an optimal treated Fe–28Cr–15Co–3.5Mo–1.8Ti magnets. The coercive force in Fe–28Cr–15Co–3.5Mo–1.8Ti magnets depends critically on the shape anisotropy of rod-like Fe Co Ti-rich α₁ particles and remanence on the alignment and elongation of α₁ particles parallel to applied magnetic field 〈100〉 directions. The optimum magnetic properties obtained in Fe–28Cr–15Co–3.5Mo–1.8Ti alloy are intrinsic coercive force, _iH_c, of 78.8 kA/m (990 Oe), remanence, B_r of 1.12 T (11.2 kG) and energy product, (BH)_max of 52.5 kJ/m³ (6.5 MGOe). The development of Fe–28Cr–15Co–3.5Mo–1.8Ti magnets as well as characterization of texture, microstructural and magnetic properties in the current study would be helpful in designing the new Fe–Cr–Co–Mo based magnets suitable for scientific and technological applications.