Preparation and flammability of a novel intumescent flame-retardant poly(ethylene-co-vinyl acetate) system

A phosphorus-containing flame retardant, 4-(5,5-dimethyl-2-oxo-1,3,2-dioxaphosphorinan-2-yloxymethyl)-2,6,7-trioxa-1-phospha-bicyclo[2.2.2]octane-1-oxide (MOPO), was synthesized successfully and characterized. The flame retardancy and thermal behavior of a new intumescent flame-retardant (IFR) system for EVA, which was made of MOPO and ammonium polyphosphate (APP), were investigated by limiting oxygen index (LOI) test, vertical burning test (UL-94), cone calorimeter, and thermogravimetric analysis (TGA). An LOI value of 28.4 and UL-94 V-0 rating can be achieved when the total loading of MOPO and APP was 30 wt.%. The results from cone calorimeter indicate that both the heat release rate (HRR) and the total heat release (THR) of IFR-EVA decreased significantly compared with those of neat EVA. TG curves showed that the amount of residues increased significantly when intumescent additives were added; it also could be found that the LOI values increased with the increase in char residues. Meanwhile, morphology of the residues obtained from burning IFR-EVA in LOI test was studied through the SEM observations and rich compact char layers could explain the excellent flame retardance.     

PP/EVA/OMMT纳米复合材料及其阻燃材料的动态燃烧行为

利用锥形量热仪(CONE)在35kW/m2热辐照条件下,并结合极限氧指数(LOI)和UL-94垂直燃烧测试方法对聚丙烯(PP)/乙烯-醋酸乙烯酯共聚物(EVA)/有机蒙脱土(OMMT)纳米复合材料和加入无卤复配阻燃剂制备的PP/EVA/OMMT/氢氧化铝(ATH)/三氧化二锑(AO)纳米复合阻燃材料的热释放速率、烟释放及材料在燃烧时的质量损失行为进行了研究。结果表明,添加5%(质量分数)OMMT可以提高PP/EVA复合材料的阻燃性能,燃烧时的热释放速率、质量损失率以及烟释放量减少,且OMMT与无卤复配阻燃剂之间可产生阻燃协同作用,使纳米复合阻燃材料的阻燃性能、热稳定性和抑烟性进一步增强。     

Study of nanocarbon black as synergist on improving flame retardancy of ethylene-vinyl acetate/brucite composites

Nanocarbon black (CB) was introduced into ethylene-vinyl acetate/brucite (EM) composites to investigate the synergistic effect of CB and metal hydroxide on improving the flame retardancy of EVA. Flammability properties of the as-prepared EVA composites were investigated by thermogravimetric analysis, limiting oxygen index (LOI), UL-94 test and cone calorimetry test. The results indicated that the optimum mass ratio of CB/brucite was 1/54, at which the EVA composites displayed dramatic improvement on thermal stability and flame retardancy. The LOI value was as high as 35.3%, the UL-94 passed the V-0 rating, and the peak heat release rate reduced 79% in comparison with pure EVA. Based on the morphology and structure analysis for residue chars, the flame-retardant mechanism was attributed mainly to the positive synergistic effect of CB and brucite on promoting the formation of better carbon protective layer during combustion.

     

Synthesis of organo-modified α-zirconium phosphate and its effect on the flame retardancy of IFR poly(lactic acid) systems

Novel intumescent flame-retardant poly(lactic acid) (PLA/IFR)/organo-modified α-zirconium phosphate(OZrP) nanocomposites were prepared via incorporation of charring agent (CA), ammonium polyphosphate (APP) and OZrP into PLA. OZrP was synthesized directly by a solvent thermal method. The morphological characterization of PLA/IFR/OZrP nanocomposites was conducted by wide angle X-ray diffraction (WXRD) and transmission electron microscopy (TEM). The effect of the OZrP on flame retardancy and the thermal stability of PLA/IFR composites were studied by thermogravimetric analysis (TGA), limiting oxygen index (LOI), vertical burning test (UL-94) and cone calorimeter test. The TGA data illustrated that the OZrP could increase the residue and significantly improve the flame retardancy of PLA/IFR/OZrP nanocomposites showing an excellent synergistic effect. The addition of OZrP to the flame-retardant PLA increases the LOI and enhances the UL-94 rating. Cone calorimeter tests gave clear evidence that the incorporation of OZrP into PLA/IFR composites resulted in the significant reduction of the heat release rate (HRR), low total heat release (THR) and high amount of char residues during combustion. The flame-retardant mechanism of PLA/IFR/OZrP nanocomposites may correspond to the intumescent flame-retardant mechanism and catalyzed carbonization mechanism caused by OZrP.     

Flammability characteristics and synergistic effect of hydrotalcite with microencapsulated red phosphorus in halogen-free flame retardant EVA composite

The flammability characteristics and synergistic effect of hydrotalcite with microencapsulated red phosphorus (MRP) in halogen-free flame retardant ethylene vinyl acetate (EVA) composite have been studied by cone calorimeter test (CCT), thermogravimetric analysis (TGA), limiting oxygen index (LOI) and UL-94 test. The results obtained by comparing the flame retardancy of hydrotalcite with magnesium hydroxide (MH) and aluminium hydroxide (AH) for their EVA composites showed that hydrotalcite has higher flame retardant effect than MH and AH at the same loading level. The CCT tests indicated that the heat release rate (HRR) and mass loss rate (MLR) of EVA composite blended with hydrotalcite greatly decreased compared with those blended with MH and AH. The LOI values of EVA/hydrotalcite composites are 3-4% higher than those of the corresponding MH composites at 40-60 wt% loading levels, and 6% higher than that of the corresponding AH composite at 40 wt% loading level. Moreover, the addition of a given amount of MRP apparently resulted in the increase of LOI value and decrease of the HRR and MLR as well the loading of hydrotalcite in EVA blend while keeping the V-0 rating in UL-94 test. However, the smoke release increased during the combustion of EVA/hydrotalcite blend containing MRP.     

Simultaneous improvement in the flame retardancy and water resistance of PP/APP through coating UV-curable pentaerythritol triacrylate onto APP

To improve the flame-retardant efficiency and water resistance of ammonium polyphosphate(APP), the UV-curable pentaerythritol triacrylate(PETA) was used to microencapsulate APP via the UV curing polymerization method. The prepared PETA-microencapsulated APP(PETA-APP) was characterized by Fourier transform infrared spectroscopy(FTIR), scanning electron microscopy(SEM), and thermogravimetric(TG) analysis. PETA-APP was used as intumescent flame retardant(IFR) alone to flame retard polypropylene(PP). The water resistance of PP/PETA-APP composites was investigated, and the effect of PETA on the combustion behaviors of PP/APP composites was studied through limiting oxygen index(LOI), vertical burning test(UL-94) and cone calorimeter(CC) test, respectively. With 40 wt% of PETA-APP, the PP/PETA-APP system could achieve a LOI value of 30.0% and UL-94 V-0 rating after treatment in hot water for 168 h, while the LOI value of the system containing 40 wt% uncoated APP was only 19.2%, and it failed to pass the UL-94 rating. CC test results showed that the heat release rate(HRR), mass loss rate(MLR) and smoke production rate(SPR) of PP/PETAAPP system decreased significantly compared with PP/APP system, especially the peak of HRR was decreased by 51.4%. The mechanism for the improvement of flame reatardancy for PP/PETA-APP composites was discussed based on FTIR and X-ray photoelectron spectroscopy(XPS) tests. All these results illustrated that simultaneous improvement of flame retardancy and water resistance for PP/APP was achieved through coating UV-curable PETA onto APP.     

Synergistic effects of aluminum hypophosphite on intumescent flame retardant polypropylene system

The effects of aluminum hypophosphite(AHP) as a synergistic agent on the flame retardancy and thermal degradation behavior of intumescent flame retardant polypropylene composites(PP/IFR) containing ammonium polyphosphate(APP) and triazine charring-foaming agent(CFA) were investigated by limiting oxygen index(LOI), UL-94 measurement, thermogravimetric analysis(TGA), cone calorimeter test(CONE), scanning electron microscopy(SEM) and X-ray photoelectron spectroscopy(XPS). It was found that the combination of IFR with AHP exhibited an evident synergistic effect and enhanced the flame retardant efficiency for PP matrix. The specimens with the thickness of 0.8 mm can pass UL-94 V-0 rating and the LOI value reaches 33.5% based on the total loading of flame retardant of 24 wt%, and the optimum mass fraction of AHP/IFR is 1:6. The TGA data revealed that AHP could change the degradation behavior of IFR and PP/IFR system, enhance the thermal stability of the IFR and PP/IFR systems at high temperatures and promote the char residue formation. The CONE results revealed that IFR/AHP blends can efficiently reduce the combustion parameters of PP, such as heat release rate(HRR), total heat release(THR), smoke production rate(SPR) and so on. The morphological structures of char residue demonstrated that AHP is of benefit to the formation of a more compact and homogeneous char layer on the materials surface during burning. The analysis of XPS indicates that AHP may promote the formation of sufficient char on the materials surface and improve the flame retardant properties.     

Preparation and characterization of flame retardant and low smoke releasing oil-resistant EVA/NBR blends

Nano-Si O2 and/or Mo O3 were introduced to ethylene-vinyl acetate/nitrile butadiene rubber(EVA/NBR) blends containing magnesium hydroxide(MH) and red phosphorus(RP) to further improve the mechanical properties, oil resistance, smoke suppression and flame retardancy. The results indicated that the tensile strength and oil resistance were significantly improved by incorporating nano-Si O2. Smoke suppression tests for EVA/NBR blend samples showed that both nano-Si O2 and Mo O3 can significantly reduce smoke release amount. The flammability characterization indicated that the blended sample with an LOI value of 33.0 could achieve V-0 level in the UL-94 test. Cone calorimetry test data showed the peak heat release rate was 67% lower than that for pure EVA/NBR. Thermal analysis showed that the presence of both nano-Si O2 and Mo O3 was beneficial to promoting char formation of the EVA/NBR blends. Char residual analysis suggested that Mo O3 aggregated in solid phase during combustion.     

A biobased flame retardant towards improvement of flame retardancy and mechanical property of ethylene vinyl acetate

A new biobased flame retardant (MHPA) with remarkable compatibility was synthesized via a facile and low-cost neutralization reaction of magnesium hydroxide (MH) and phytic acid (PA). By blending the prepared MHPA into ethylene vinyl acetate (EVA), the fire retardancy, smoke suppression and mechanical properties of the composites were significantly improved. When 50 wt% of MH was added into EVA matrix, the value of limiting oxygen index (LOI) reached 26.1%. Whereas, when 10 wt% MH in the EVA composites (with initial 50 wt% MH) was replaced by MHPA, the resulted EVA composites had a LOI value of 30.8%, indicating high efficiency of addition of MHPA to improve flame retardancy. Moreover, the heat release rate (HRR) and total smoke production (TSP) of the EVA composites reduced by 54.4% and 27.6%, respectively, suggesting that incorporation of MHPA could effectively hinder rapid degradation of EVA composites during burning process. The fire-retardant mechanism may reside in that the MHPA combined with MH can present the excellent carbonization and expansion effects. This study illustrates that the biobased MHPA has a broad application prospect to develop flame-retardant EVA composites.     

Preparation of Polylactide Composite with Excellent Flame Retardance and Improved Mechanical Properties

Despite the good biodegradable and mechanical properties, poly(lactic acid) still suffers from a highly inherent flammability, which restricts its applications in the electric and automobile fields. In order to improve the flame retardancy of PLA, in this work, melamine polyphosphate (MPP) and zinc bisdiethylphosphinate (ZnPi) were firstly incorporated into PLA, and the synergistic effect of them on flame retardance of PLA was investigated using limiting oxygen index (LOI), UL-94 vertical measurement, scanning electron microscopy (SEM) and cone calorimeter tests etc. The results showed that PLA composite with 15 wt% of MPP/ZnPi (3:2) had the best flame-retardant efficiency with LOI value of 30.1 and V0 rating in UL-94 tests, which was far better than using MPP or ZnPi alone. What is more, although a wide range of flame retardants have been developed to reduce the flammability, so far, they normally compromise the mechanical properties of PLA. On the premise of maintaining good flame-retardant performance, we improved the toughness of flame-retardant PLA composite, and the impact strength of flame-retardant PLA composite was more than tripled (8.08 kJ/m²) by adding thermoplastic urethanes (TPU). This work offers an innovative method for the design of the unique integration of extraordinary flame retardancy and toughening reinforcement for PLA materials.     

A novel halogen-free flame retardant for glass-fiber-reinforced poly(ethylene terephthalate)

In order to prepare halogen-free flame-retardant glass-fiber-reinforced poly(ethylene terephthalate) (FR-GF-PET), a novel flame retardant containing three flame-retardant elements, P, N and S, was synthesized by melt condensation reaction. Its chemical structure was characterized by FT-IR and ¹H NMR spectra. FR-GF-PET was prepared by melt-mixing the flame retardant with GF-PET. The effects of the flame retardant on the flammability and thermally decomposing behaviors of GF-PET were studied via LOI, UL-94 and TGA tests. The results showed that despite a negative effect on the thermal stability of GF-PET, the incorporation of the flame retardant improved the flame retardancy of GF-PET largely. The LOI values of GF-PET increase linearly with the increase of flame retardant content. The GF-PET passed the V-0 rating in UL-94 tests when 15 wt% of the flame retardant was added to GF-PET. An interesting phenomenon was found, that is, with the increase of flame retardant content, the flame retardancy of the system increased but the char yield decreased, which was explained according to the evidences of XPS tests and the kinetics of thermally decomposing reaction.     

Flame retardant mechanism of an efficient flame-retardant polymeric synergist with ammonium polyphosphate for polypropylene

An efficient flame retardant polymeric synergist poly[N⁴-bis(ethylenediamino)-phenyl phosphonic-N², N⁶-bis(ethylenediamino)-1,3,5-triazine-N-phenyl phosphonate] (PTPA) was designed and synthesized from cyanuric chloride, ethylenediamine and phenylphosphonic dichloride. It was characterized by Fourier Transform Infrared (FTIR), ¹H NMR and ³¹P NMR, Elemental Analysis (EA) and Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). Combined with ammonium polyphosphate (APP), a new intumescent flame retardant (IFR) was obtained. The flammability behaviors of polypropylene (PP)/IFR system were investigated by limiting oxygen index (LOI), vertical burning test (UL-94) and cone calorimetry. With 25 wt% of IFR (APP:PTPA = 2:1), the PP/IFR system could achieve a LOI value of 34.0% and UL-94 V-0 rating, and the heat release rate (HRR), peak heat release rate (PHRR), total heat release (THR) and smoke production rate (SPR) were considerably reduced, especially HRR and SPR were decreased by 85% and 79%, respectively. The results indicate that there is an excellent synergism between APP and PTPA, which endows PP with both good flame retardancy and good smoke suppression. Furthermore, the thermal degradation mechanism of IFR and the flame-retardant mechanism of PP/IFR system were investigated by thermogravimetric analysis (TGA), FT-IR, TG-FTIR and scanning electron microscope (SEM). The study on the flame-retardant mechanism of IFR indicated that a structure containing –CN was formed due to the reaction between APP and PTPA.     

Thermal Degradation,Flame Retardance and Mechanical Properties of Thermoplastic Polyurethane Composites Based on AluminumHypophosphite简

Aluminum hypophosphite （AP） was used to prepare flame-retarded thermoplastic polyurethane （FR-TPU） composites, and their flame retardancy, thermal degradation and mechanical properties were investigated by limiting oxygen index （LOI）, vertical burning test （UL-94）, thermogravimetric analysis （TGA）, cone calorimeter （CC） test, Fourier transform infrared （FTIR） spectroscopy, scanning electron microscopy （SEM） and tensile test. TPU containing 30 wt% of AP could reach a V-0 rating in the UL-94 test, and its LOI value was 30.2. TGA tests revealed that AP enhanced the formation of residual chars at high temperatures, and slightly affected the thermal stability of TPU at high temperatures. The combustion tests indicated that AP affected the burning behavior of TPU. The peak of heat release rate （PHRR）, total heat release （THR） and mass loss rate （MLR） greatly reduced due to the incorporation of AP. The tensile test results showed that both the tensile strength and the elongation at break slightly decreased with the addition of AP. The digital photos and SEM micrographs vitrified that AP facilitated the formation of more compact intumescent char layer. Based on these results mentioned above, the flame-retarding mechanism of AP was discussed. Both the self-charring during the decomposing process of AP and its facilitation to the charring of TPU led to the great improvement in the flame retardancy of TPU.     

Effects of thermal-oxidative aging on the flammability and thermal-oxidative degradation kinetics of tris(tribromophenyl) cyanurate flame retardant PA6/LGF composites

The influence of thermal-oxidative aging on the flame retardancy of the flame retardant long-glass-fiber reinforced polyamide 6 composites (FR/PA6/LGF) with different thermal-oxidative exposure times at 160 °C were studied in this work. The flammability and flame-retardant properties of FR/PA6/LGF were investigated by means of the limiting oxygen index (LOI), vertical burning test (UL-94), cone calorimeter test (CONE), and scanning electronic microscopy (SEM), before and after thermal-oxidative aging. The thermal-oxidative stability and degradation kinetics of the unaged and aged composites were studied by thermogravimetric analysis (TGA) with the methods of Kissinger and Ozawa in dynamic measurements (10 °C/min–40 °C/min). The results indicated that the flammability properties mirrored the degradation behaviors of these FR/PA6/LGF composites whatever their forms (aged or not). The Ozawa method showed that the causes of the first peak in the heat release rate change by CONE measurement corresponded to the apparent activation energies of the first stage degradation of aged FR/PA6/LGF composites, and the same conclusion with respect to the other heat release rate peak. Moreover, this aging slightly enhanced the solid phase flame-retardant mechanism by a char-promotion function, but had no effect on the gaseous flame-retardant mechanism and the decrease of harmful gas release rates. The existence of a surface migration effect on the flame retardant would endow FR/PA6/LGF composites with better LOI values, a more protective char layer structure, and excellent UL-94 ratings.     

Preparation of flame retardant and thermal insulation polystyrene foams via high internal phase emulsion template

Expanded polystyrene foam (EPSF), valued for its excellent insulation properties, faces a significant flammability challenge due to its cellular structure. Traditional flame retardant methods such as physical blending and layer-by-layer assembly have poor applicability to EPSF. Therefore, it is necessary to find other more effective methods for synthesizing flame-retardant EPSF. The high internal phase emulsion (HIPE) template is one of the simplest and most commonly used methods for synthesizing porous materials, which have features such as adjustable pore structures and high porosity. In this work, ammonium polyphosphate (APP)/starch was added to the dispersed phase of the HIPE to prepare the flame-retardant EPSF by one-pot method. The morphology, thermal stability and flame retardancy of the foams were investigated. When the addition of APP/starch (the weight ratio is 1:1) reached 30 wt.%, the peak heat release rate (PHRR), total heat release (THR), and total smoke release (TSR) of the composite foam decreased by 74.7%, 65.9%, and 24.7%, respectively, compared to the pure PS foam. Meanwhile, its limiting oxygen index (LOI) value reached 25.8%, and the UL-94 rating reached V-1 level, indicating significant improvement in flame retardancy. This study provides an effective strategy for synthesizing flame-retardant porous materials.     

Thermal stability and flame retardancy of PET/magnesium salt composites

Nano-Mg(OH)₂ (nanometre magnesium hydroxide, nano-MH) was successfully introduced into the esterification and polycondensation system by in situ polymerization to obtain PET/magnesium salt composites (PETMS). The thermal properties and flame retardancy of PETMS were investigated by differential scanning calorimeter (DSC), thermogravimetric analysis (TGA), UL-94 vertical burning and limited oxygen index (LOI) test. The DSC and TGA results show that magnesium salts in the PET matrix have little effect on the thermal properties of PET, but a significant effect on the thermal stabilities of the composites. The results of LOI and UL-94 test show PETMS have higher LOI values (≥25%) and V-0 rating without melt dripping in the UL-94 test, indicating that PETMS have good flame retardancy and anti-dripping property. Moreover, the residues of magnesium salts and composites after TGA test were also studied by Fourier transform infrared spectroscopy (FTIR) to better understand the mechanism of flame retardancy, which reveals that magnesium salts accelerate the degradation of PET and catalyze the formation of char. The SEM results show the morphological structures of the char effectively protect the composites’ internal structures and inhibit the heat, smoke transmission and reduce the fuel gases when the fire contacts them.     

磷化淀粉的合成及其与聚磷酸铵协效阻燃聚乳酸的性能研究

利用9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO)和马来酸酐(MA)对淀粉进行改性得到磷化淀粉(DOPOMASt),通过红外光谱(FTIR)、核磁共振谱(1H-NMR)和X射线光电子能谱(XPS)确定其结构.利用DOPOMASt作为碳源,与聚磷酸铵(APP)复配后通过熔融共混制备了阻燃聚乳酸(PLA)...     

Effect of natural basalt fiber for EVA composites with nickel alginate‐brucite based flame retardant on improving fire safety and mechanical properties

The natural basalt fiber (BF) was incorporated into EVA composites with environmental‐friendly nickel alginate‐brucite based flame retardant (NiFR), to further improve the flame‐retardant effect and mechanical properties. The flame retardancy of EVA composites were characterized by LOI, UL 94, and cone test. With 55 wt% loading, 3BF/52NiFR had the highest LOI value of 31.9 vol.% in all fiber reinforced composites and pass UL 94V‐0 ratting. And comparing to 55B composite with untreated brucite, 3BF/52NiFR decreased peak of heat release rate by 47.8%, total heat release by 21.9%, and total smoke production by 35.5% and kept more residue 54.0% during cone test. Moreover, 3BF/52NiFR also enhanced the mechanical properties of composites by better compatibility with EVA matrix. BF/NiFR exert synergistic flame‐retardant effect major in promoting charring effect in condensed phase during combustion. The fire‐resisted and rigid BF into the char layer reinforced the intensity of protective barrier which prolonged the residence time of pyrolysis carbonaceous groups degraded from EVA matrix, resulting in less heat and smoke release.     

一种无卤阻燃ABS体系的阻燃性能研究

ABS是本世纪40年代发展起来的通用型热塑性材料[1],它有良好的力学性能,耐化学腐蚀、易加工等优点[2-6].     

Synergistic effect of boron containing substances on flame retardancy and thermal stability of intumescent polypropylene composites

The synergistic effect of four different boron containing substances, zinc borate (ZnB), borophosphate (BPO₄), boron silicon containing preceramic oligomer (BSi) and lanthanum borate (LaB), were studied to improve the flame retardancy of a polypropylene (PP) intumescent system composed of ammonium polyphosphate (APP) and pentaerythritol (PER). The flame retardancy of PP composites was investigated by limiting oxygen index (LOI), UL-94 standard, thermogravimetric analysis (TGA) and cone calorimeter tests. The addition of 20 wt% intumescent flame retardant (IFR) improves the flame retardancy by increasing the char formation. According to LOI and UL-94 test, boron compounds show their highest synergistic effect at 1 wt% loading. BPO₄ containing composite shows the highest LOI (30), lowest maximum heat release rate (HRR) and lowest total heat release rate (THR) value. Although the char yield increases as the amount of boron compounds increases, the flame retarding effect decreases. Cone calorimeter and TGA data indicate that the boron compounds are likely to show their synergistic effect by reinforcing the integrity of char which improves its barrier effect rather than increasing the char yield.