Perylene and naphthalene diimide copolymers for all-polymer solar cells: Effect of perylene/naphthalene ratio

We report the synthesis of a series of copolymers, having 2,2′-bithiophene as electron-donating moiety, and perylene diimide (PDI) and/or naphthalene diimide (NDI) as electron-accepting moiety, and employed as non-fullerene acceptors in polymer solar cells (PSCs). All the copolymers show wide absorption varying from 300 to 850 nm in the visible and NIR spectrum. When changing the PDI/NDI ratio in the polymer backbone, The LUMO energy levels vary in the range of −3.90 to −3.80 eV and the HOMO energy levels vary in the range of −6.10 to −5.85 eV. Among PSCs based on PTB7-Th donor and these polymer acceptors, the devices based on PTB7-Th/NDI100 yield the best power conversion efficiency (PCE) of 4.67%, while the PTB7-Th/PDI100-based devices yield a PCE of 1.03%. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 682–689     

Rylene diimide and dithienocyanovinylene copolymers for polymer solar cells

Two polymers containing(E)-2,3-bis(thiophen-2-yl)acrylonitrile(CNTVT) as a donor unit, perylene diimide(PDI) or naphthalene diimide(NDI) as an acceptor unit, are synthesized by the Stille coupling copolymerization, and used as the electron acceptors in the solution-processed organic solar cells(OSCs). Both polymers exhibit broad absorption in the region of 300–850 nm. The LUMO energy levels of the resulted polymers are ca. –3.93 eV and the HOMO energy levels are –5.97 and –5.83 eV. In the binary blend OSCs with PTB7-Th as a donor, PDI polymer yields the power conversion efficiency(PCE) of up to 1.74%, while NDI polymer yields PCE of up to 3.80%.     

Rhodanine flanked indacenodithiophene as non-fullerene acceptor for efficient polymer solar cells

A fused-ring electron acceptor IDT-2BR1 based on indacenodithiophene core with hexyl side-chains flanked by benzothiadiazole rhodanine was designed and synthesized.In comparison with its counterpart with hexylphenyl side-chains(IDT-2BR),IDT-2BR1exhibits higher highest occupied molecular orbital(HOMO)energy but similar lowest unoccupied molecular orbital(LUMO)energy(IDT-2BR1:HOMO=-5.37eV,LUMO=-3.67eV;IDT-2BR:HOMO=-5.52eV,LUMO=-3.69eV),red-shifted absorption and narrower bandgap.IDT-2BR1 has higher electron mobility(2.2×10~(-3)cm~2 V~(-1)s~(-1))than IDT-2BR(3.4×10~(-4)cm~2 V~(-1)s~(-1))due to the reduced steric hindrance and ordered molecular packing.Fullerene-free organic solar cells based on PTB7-Th:IDT-2BRl yield power conversion efficiencies up to 8.7%,higher than that of PTB7-Th:IDT-2BR(7.7%),with a high open circuit voltage of0.95 V and good device stability.     

Computational prediction of the properties of bis(ethynylthienyl)dialcoxynaphthalene-based conjugated polymers for organic solar cell applications

A series of homo- ( P0 ) and copolymers ( P1-P5 ) based on the electron-donor building-block 2,2′-(2,3-bis(2-ethylhexyloxy)naphthalene-1,4-diyl)bis(ethyne-2,1-diyl)dithiophene (1,4-NET) including ethynyl linkers aiming to promote coplanarity were designed, and their properties predicted using theoretical methodologies to evaluate their potential in organic solar cell applications. The geometries, FMO levels, energy bandgaps, and absorption spectra of trimer models were determined using time-dependent density functional theory, while their photovoltaic and charge-transport properties were estimated by the Scharber's model and semiclassical Marcus theory, respectively. Compared to high-performance conjugated polymers (CPs), such as PTB7-Th or PM6, and similar systems based on the 1D-BDT unit, the HOMO and LUMO levels of P0-P5 tend to be higher. In addition, the new CPs have complementary absorptions with narrow-bandgap acceptors, such as ITIC and Y6, and adequate matches between their HOMO and LUMO levels. Although the simulated photovoltaic and charge-transport properties could be overestimated, the best candidate to be synthesized and tested in organic solar cells is P5 due to its suitable and well-balanced properties, demonstrating the positive effect of incorporating ethynyl bridges to improve the optoelectronic properties of CPs.     

A chlorinated polymer promoted analogue co-donors for efficient ternary all-polymer solar cells

The efficient ternary all-polymer solar cells(PSCs) are designed and fabricated, using a polymer acceptor of NDP-V-C7 and analogue co-donors containing a chlorinated polymer PBCl T and classical PTB7-Th. PBCl T and PTB7-Th possess very similar chemical structure and matched energy levels to form the cascade of the co-donors. Meanwhile, benefiting from those analogous polymer structures, there is little influence of the morphology in blend film compared to their pristine polymer films. The binary PBCl T:NDP-V-C7 devices exhibit a high open-circuit voltage(V_(oc)) due to the deep HOMO level of PBCl T. The V_(oc)of all-PSCs could be finely manipulated by adjusting the content of PBCl T in blend film. The ternary all-PSCs have the more balanced charge mobility and prolonged carrier lifetime compared to the binary devices. The PBCl T also help improve the miscibility of ternary blend and suppress crystallization in films, bringing about favorable morphology with appropriate orientation and surface roughness in blend film. With the optimal processing, the champion ternary all-PSCs obtain a high PCE of 9.03%, which is about 10% enhancement compared to that of binary device. The results indicate that the ternary approach using analogue co-donors is a practical method to enhance the performance of all-PSCs.     

Ternary organic solar cells:Improved optical and morphological properties allow an enhanced efficiency

The power co nversion efficiency(PCE) of OFQx-T:PC_(71)BM blend films reaches 7.59%.On this basis,ternary organic solar cells(OSCs) were fabricated with ITIC or PTB7-Th as the third component.The ternary OSCs with 50 wt% ITIC in acceptors exhibits an enhanced efficiency,from 7.59% to 8.17%.Also,the PCE of ternary OSCs with 50 wt% PTB7-Th in donors achieves 8.72%,which is 13% higher than that of binary OSCs.The PCE improvement of two ternary OSCs is mainly due to the increase of short-circuit current density(J_(SC)),which can be attributed to the complementary absorption spectra and improved film morphology.This work suggests that the selection of an appropriate third component plays a critical role in improving the PCE of ternary OSCs.     

An Electron‐Deficient Building Block Based on the B←N Unit: An Electron Acceptor for All‐Polymer Solar Cells

A double B←N bridged bipyridyl (BNBP) is a novel electron‐deficient building block for polymer electron acceptors in all‐polymer solar cells. The B←N bridging units endow BNBP with fixed planar configuration and low‐lying LUMO/HOMO energy levels. As a result, the polymer based on BNBP units (P‐BNBP‐T) exhibits high electron mobility, low‐lying LUMO/HOMO energy levels, and strong absorbance in the visible region, which is desirable for polymer electron acceptors. Preliminary all‐polymer solar cell (all‐PSC) devices with P‐BNBP‐T as the electron acceptor and PTB7 as the electron donor exhibit a power conversion efficiency (PCE) of 3.38 %, which is among the highest values of all‐PSCs with PTB7 as the electron donor.     

Ladder‐Type Nonacyclic Arene Bis(thieno[3,2‐b]thieno)cyclopentafluorene as a Promising Building Block for Non‐Fullerene Acceptors

The ladder‐type nonacyclic arene (bis(thieno[3,2‐b]thieno)cyclopentafluorene (BTTF)) has been designed and synthesized through fusing thienothiophenes with the fluorene core from the synthon of dimethyl 9,9‐dioctyl‐2,7‐bis(thieno[3,2‐b]thiophen‐2‐yl)fluorene‐3,6‐dicarboxylate. With BTTF as the central donor unit, a novel acceptor–donor–acceptor (A‐D‐A) type non‐fullerene small‐molecule acceptor ( BTTFIC ) was prepared with 1,1‐dicyanomethylene‐3‐indanones (IC) as the peripheral acceptor units. The energy level of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of BTTFIC locate at ?5.56 and ?3.95 eV, respectively, presenting a low optical band gap of 1.58 eV. Encouragingly, polymer solar cells based on the blends of BTTFIC with both the representative wide‐ and low‐bandgap polymer donors (PBDB‐T, 1.82 eV. PTB7‐Th, 1.58 eV) offer power conversion efficiencies over 8 % (8.78±0.18 % for PBDB‐T: BTTFIC and 8.18±0.29 % for PTB7‐Th: BTTFIC ). These results highlight the advantage of ladder‐type BTTF on the preparation of nonfullerene acceptors with extended conjugated backbones.     

Perylene Diimide Hexamer Based on Combination of Direct and Indirect Linkage Manners for Non-fullerene Organic Solar Cells

Perylene diimide (PDI) is one of the most intensively studied building blocks for the construction of non-fullerene acceptors (NFAs). In this contribution, based on combination of the direct and indirect linkage manners of PDI units at the bay position, a propeller-shaped PDI hexamer T-DPDI was designed and synthesized. The singly bonded PDI dimer DPDI and the benzene ring cored PDI trimer TPDI were synthesized for comparison. The photovoltaic performances of these three PDI derivatives were investigated using the commercially available PTB7-Th as electron donor. A best power conversion efficiency (PCE) of 6.58% was obtained for T-DPDI based organic solar cells (OSCs), which is higher than those of DPDI and TPDI based ones. The superior photovoltaic performance of T-DPDI can be ascribed to its stronger absorption and more favorable morphology. This study presents an interesting example of improving the photovoltaic performances of PDI based NFAs by hybridizing the direct and indirect linkage manners.     

Enhanced Hole Transport in Ternary Blend Polymer Solar Cells

Recently, ternary blend polymer solar cells have attracted great attention to improve a short-circuit current density (J_SC) effectively, because complementary absorption bands can harvest the solar light over a wide wavelength range from visible to near-IR region. Interestingly, some ternary blend solar cells have shown improvements not only in J_SC but also in fill factor (FF). Previously, we also reported that a ternary blend solar cell based on a low-bandgap polymer (PTB7-Th), a wide-bandgap polymer (PDCBT), and a fullerene derivative (PCBM) exhibited a higher FF than their binary analogues. Herein, we study charge transport in PTB7-Th/PDCBT/PCBM ternary blend films to address the origin of the improvement in FF. We found that hole polarons are located in PTB7-Th domains and their mobility is enhanced in the ternary blend film.     

Star-Shaped and Fused Electron Acceptors based on C3h-Symmetric Coplanar Trindeno[1, 2-b: 4, 5-b′: 7, 8-b′′]trithiophene Core for Non-Fullerene Solar Cells

Two new star-shaped and fused electron acceptors, TITT-3IC and TITT-3ICF have been designed and synthesized, which consist of a C_3h-symmetric coplanar trindeno[1, 2-b: 4, 5-b′: 7, 8-b′′]trithiophene (TITT) as the central core and 3-(dicyanomethylidene)indan-1-one and 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene) malononitrile as the peripheral electron-withdrawing groups, respectively. With the large coplanar configuration and electron-rich nature of π-conjugated backbone, these two acceptors exhibit strong intermolecular charge transfer absorption in the region of 500–650 nm with the optical band gaps around 1.9 eV. Relative to TITT-3IC , TITT-3ICF shows the downshifted LUMO level and the slightly redshifted absorption with the higher molar extinction coefficient due to the stronger electron-withdrawing effect of fluorination. When blending with PTB7-Th , the TITT-3ICF- based device displays a higher power conversion efficiency (PCE) of 4.26 % than the TITT-3IC- based device (PCE=3.87 %). Comparing with the TITT-3IC -based device, the increased short circuit current (J_SC) and fill factor (FF) are responsible for the higher PCE value of the TITT-3ICF- based device, which benefits from its strong and redshifted absorption for light harvesting and proper phase separation morphology for effective exciton dissociation and charge transport. This work demonstrates that as an alternative electron-donating core, TITT will be promising in designing star-shaped non-fullerene materials.     

Impact of 1,8-diiodooctane on the morphology of organic photovoltaic (OPV) devices – A Small Angle Neutron Scattering (SANS) study

The impact of the additive 1,8-diiodooctane on the morphology of bulk-heterojunction solar cells based on the systems P3HT:PC₇₁BM, PTB7:PC₇₁BM and PTB7-Th:PC₇₁BM is studied using a combination of Small Angle Neutron Scattering (SANS) and Atomic Force Microscopy (AFM). The results clearly show that while in the P3HT:PC₇₁BM system, the additive DIO promotes a slight coarsening of the phase domains (type I additive), in the systems PTB7:PC₇₁BM and PTB7-Th:PC₇₁BM, DIO promotes a large decrease in the size of the phase domains (type II additive). SANS is demonstrated as being particularly useful at detecting the minor morphological changes observed in the P3HT:PC₇₁BM system, which can be hardly seen in AFM. This work illustrates how SANS complements AFM and both techniques when used together provide a deeper insight into the nanoscale structure in thin organic photovoltaic (OPV) device films.     

[Ru(dcbpy)2dppz]2+/Fullerene Cosensitized PTB7-Th for Ultrasensitive Photoelectrochemical MicroRNA Assay

A new cosensitization photoelectrochemical (PEC) strategy was established by using a donor–acceptor-type photoactive material, poly{4,8-bis[5-(2-ethylhexyl)thiophen-2-yl]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl-alt-3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophene-4,6-diyl} (PTB7-Th), as a signal indicator, which was cosensitized with bis(4,4′dicarboxyl-2,2′-bipyridyl)(4,5,9,14-tetraazabenzo[b]triphenylene)ruthenium(II) ([Ru(dcbpy)₂dppz]²⁺) embedded in the grooves of the DNA duplex and fullerene (nano-C₆₀) immobilized on the surface of DNA nanoflowers for microRNA assay. [Ru(dcbpy)₂dppz]²⁺ and nano-C₆₀ could effectively enhance the photoelectric conversion efficiency (PCE) of PTB7-Th as a result of well-matched energy levels among nano-C₆₀, [Ru(dcbpy)₂dppz]²⁺ and PTB7-Th, leading to a clearly enhanced photocurrent signal. Meanwhile, a target recycling magnification technique based on duplex-specific nuclease was applied in this work to obtain higher detection sensitivity. The proposed biosensor demonstrated excellent analytical properties within a linear detection range of 2.5 fm to 2.5 nm and a limit of detection down to 0.83 fm . Impressively, this cosensitization PEC strategy offers an effective and convenient avenue to significantly improve the PCE of a photoactive material, resulting in a remarkably improved photocurrent signal for ultrasensitive and highly accurate detection of various targets.     

Side chain engineering of naphthalene diimide–bithiophene‐based polymer acceptors in all‐polymer solar cells

Two novel polymeric acceptors based on naphthalene diimide (NDI) and 2.2′‐bithiophene, named as P(NDI2THD‐T2) and P(NDI2TOD‐T2), were designed and synthesized for all polymer solar cells application. The structural and electronic properties of the two acceptors were modulated through side‐chain engineering of the NDI units. The optoelectronic properties of the polymers and the morphologies of the blend films composed of the polymer acceptors and a donor polymer PTB7‐Th were systemically investigated. With thiophene groups introduced into the side chains of the NDI units, both polymers showed wider absorption from 350 nm to 900 nm, compared with the reference polymer acceptor of N2200. No redshift of absorption spectra from solutions to films indicated reduced aggregation of the polymers due to the steric hindrance effect of thiophene rings in the side chains. The photovoltaic performance were characterized for devices in a configuration of ITO/PEDOT:PSS/PTB7‐Th:acceptors/2,9‐bis(3‐(dimethylamino)propyl)anthra[2,1,9‐def:6,5,10‐def]diisoquinoline‐1,3,8,10(2H,9H)‐tetraone (PDIN)/Al. With the addition of diphenyl ether as an additive, the power conversion efficiencies (PCEs) of 2.73% and 4.75% for P(NDI2THD‐T2) and P(NDI2TOD‐T2) based devices were achieved, respectively. The latter showed improved J_sc, Fill Factor (FF), and PCE compared with N2200 based devices. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3679–3689     

带有噻吩侧基的有机硼小分子电子受体光伏材料

有机小分子电子受体材料的侧基能够影响异质结有机太阳能电池的给体/受体匹配和器件性能。我们设计并合成了一个硼原子带有噻吩侧基的有机硼小分子(MBN-Th)。该分子的LUMO离域在整个骨架上,HOMO定域在中心核上,其独特的电子结构使该分子具有两个强的吸收峰(波长分别为490和726nm),因此分子具有宽的吸收光谱和强的太阳光吸收能力。与苯基侧基相比,噻吩侧基使分子的HOMO能级下移0.1 eV,LUMO能级保持不变,进而引起分子带隙减小和吸收光谱蓝移20nm。基于该有机硼小分子受体材料的异质结有机太阳能电池,实现了4.21%的能量转化效率和300–850nm的宽响应光谱。实验结果表明,硼原子上的噻吩侧基是调控有机硼小分子光电性质的有效方法,可以用于有机硼小分子受体材料的设计。     

Fluorination-substitution effect on all-small-molecule organic solar cells

Due to the strong crystallinity and anisotropy of small molecules, matched molecular photoelectric properties and morphologies between small molecules and non-fullerene acceptors are especially important in all-small-molecule organic solar cells(OSCs).Introducing fluorine atoms has been proved as an effective strategy to achieve a high device performance through tuning molecular energy levels, absorption and assembly properties. Herein, we designed a novel benzodithiophene-based small molecule donor BDTF-CA with deep highest occupied molecular orbital(HOMO) energy level. All-small-molecule OSCs were fabricated by combing non-fullerene acceptor IDIC with different fluorine-atom numbers. Two or four fluorine atoms were introduced to the end-capped acceptor of IDIC, which are named as IDIC-2 F and IDIC-4 F, respectively. With the increase of fluorination from IDIC to IDIC-4 F, the open circuit voltage(V_(oc)) of the devices decreased, while hole and electron mobilities of the active layers increased by one order of magnitude. Contributed to the most balanced V_(oc), short-circuit current(J_(sc)) and fill factor(FF), the device based on BDTF-CA/IDIC-2 F achieved the highest power conversion efficiency of 9.11%.     

基于侧链不对称喹喔啉聚合物的高效非富勒烯太阳电池

喹喔啉衍生物由于合成简单,易功能化,成本较低等特点在众多领域都有广泛应用。其自身具有平面刚性结构,也是构建光电聚合物的重要单体。基于喹喔啉单元的有机分子化学结构和电子结构可修饰性强,通过骨架、侧链和取代基等修饰,易于调控分子的能级和吸光光谱,因此,当使用喹喔啉体系的共轭给体与球形富勒烯受体(如PCBM)及弱结晶性非富勒烯受体(如ITIC)均可表现出优异的光伏性能。在本工作中,基于结晶性较强的非富勒烯受体(o-IDTBR),我们首次制备出侧链不对称喹喔啉(简称：不对称喹喔啉)基聚合物(TPQ-1)与之匹配。相比于侧链对称性喹喔啉(简称：对称喹喔啉)(HFQx-T)与o-IDTBR组合,“弱结晶给体-强结晶受体”组合能表现出更佳均匀的相分离尺度,从而获得更高的短路电流及能量转换效率。TPQ-1与o-IDTBR共混后器件效率为8.6%,加入15%的TB7-Th后,器件效率达到9.6%。     

Effect of temperature,humidity and pressure on electric properties of the cells based on PTB7-Th,PC61BM and graphene composite

Journal of Thermal Analysis and Calorimetry - In this paper, fabrication and characterization of Cu/PTB7-Th (35 mass%)/PC $$_{61}$$ BM (35 mass%)/graphene (30 mass%)/Ag...     

Side-chain modification of polyethylene glycol on conjugated polymers for ternary blend all-polymer solar cells with efficiency up to 9.27%

With the rapid progress achieved by all-polymer solar cells (all-PSCs), wide-bandgap copolymers have attracted intensive attention for their unique advantage of constructing complementary absorption profiles with conventional narrow-bandgap copolymers. In this work, we designed and synthesized a wide bandgap ternary copolymer PEG-2% which has the benzodithiophene-alt-difluorobenzotriazole as the backbone and the polyethylene glycol (PEG) modified side chain. The PBTA-PEG-2%:N2200 can be processed with a non-chlorinated solvent of 2-methyl-tetrahydrofuran (MeTHF) for the binary all-PSC, which exhibits a moderate photovoltaic performance. In particular, the ternary all-PSCs that consisting an additional narrow bandgap polymer donor PTB7-Th can also be processed with MeTHF, resulting in an unprecedented power conversion efficiency (PCE) of 9.27%, and a high PCE of 8.05% can be achieved with active layer thickness of 240 nm, both of which are the highest values so far reported from all-PSCs. Detailed investigations revealed that the dramatically improved device performances are attributable to the well-extended absorption band in the photoactive layer. Hence, developing novel copolymers with tailored side chains, and introducing additional polymeric components, can broaden the horizon for high-performance all-PSCs.     

Synthesis of two A-B-C type conjugated amphiphilic triblock fullerene derivatives and their application in organic solar cells

Two A-B-C type conjugated amphiphilic triblock fullerene derivatives C60-2 HMTPB and C60-2 EHTPB were obtained in multi steps synthesis with three different blocks,and the amphiphilic diblock molecular C60-4 TPB was also preferred as a reference.When as modifying layer on zinc oxide(ZnO),the three fullerene derivatives can all reduce the work function of ZnO via modulation of the interfacial dipoles and lead a better electrical coupling.As introducing treatment of toluene,the obvious self-assembly of fullerene derivatives were observed,which were supported by X-ray diffraction and contact angle of water measurement.Base on PTB7-Th:PC71 BM system,the inverted organic solar cells devices with structure of ITO/ZnO/fullerene derivatives/PTB7-Th:PC71BM/Mo03/Al got power conversion efficiencies of 8.62%,8.83%and 9.00%for C60-4 TPB,C60-2 HMTPB and C60-2 EHTPB,respectively,compared 8.13%of devices with bare ZnO.The result of conjugated amphiphilic triblock fullerene derivatives provides a straightforward approaching by simultaneously modulating the morphology and interfacial work function of ZnO,which can also lead high performance in optoelectronic devices.