Interference studies on a PVC-matrix membrane calcium ion-selective electrode based on calcium bis-di[4-(1,1,3,3-tetramethylbutyl)phenyl] phosphate as sensor and tri-n-pentyl phosphate as solvent mediator

Interference potentials, E(M), defined as the difference between the observed potential and the potential calculated assuming that there is no interference, have been determined, and their fit to the equation E(M) = -(RT/F) 1n [1 + K(M)a(B)/(a(Ca))1 2 (z(B)) discussed for a PVC-matrix membrane calcium ion-selective electrode based on calcium bis-di[4-(1,1,3,3-tetramethylbutyl)phenyl]phosphate as sensor with tri-n-pentyl phosphate as solvent mediator in mixed solutions of CaCl(2)BCl(x), where B = Li, Na, K, Mg, Zn or Cu, at total ionic strengths of 0.2, 0.4 and 0.6. Generally, K(M) for the alkali metal ions is considerably less for this electrode than for a comparison electrode based on Orion 92-20-02 liquid ion-exchanger in PVC. Occasionally, the data do not fit the equation. Thus, particularly for the bivalent ions, although the plots of exp[-E(M)F/RT] vs. a(B)/(a(Ca))1 2 (z(B)) are usually linear, they frequently do not intercept the ordinate at 1.00 and/or may give negative slopes and hence negative K(M) values.     

Evaluation of microchip capillary electrophoresis with external contactless conductivity detection for the determination of major inorganic ions and lithium in serum and urine samples

The determination of inorganic ions in clinical samples in less than 90 seconds was demonstrated for microchip capillary electrophoresis using capacitively coupled contactless conductivity detection (C(4)D). Bare electrophoresis chips were used in combination with external electrodes which were part of the chip holder. In order to achieve the required selectivity and sensitivity, an optimization of the electrode layout was carried out. Limits of detection (LOD) of 1 microM for K(+), 1.5 microM for Ca(2+), 3 microM for Na(+), 1.75 microM for Mg(2+) and 7.5 microM for Li(+) were achieved. The determination of inorganic cations (NH(4)(+), K(+), Na(+), Ca(2+), Mg(2+)) and anions (Cl(-), NO(3)(-), SO(4)(2-), phosphate) in blood serum and urine samples was possible in one common electrolyte solution containing 15 mM L-arginine, 10.75 mM maleic acid and 1.5 mM 18-crown-6 at pH 5.90 by simply switching the separation voltage from positive to negative polarity. Lithium, present at significant levels when used for therapeutic purposes, can also be determined in blood serum using a slightly modified background electrolyte solution.     

Silver(I) ion selective PVC membrane based on bis-pyridine tetramide macrocycle

A PVC membrane based on bis-pyridine tetramide macrocycle exhibits a good response for silver ion over a wide concentration range (1.0x10(-1)-4.0x10(-5) mol l(-1)). The electrode has a relatively fast response time and can be used for more than 5 months without observing any divergence. High selectivity for Ag(+) ions over that of Na(+), K(+), Ca(2+), Sr(2+), Pb(2+) and Hg(2+) have been observed.     

Lead-selective poly(vinyl chloride) membrane electrodes based on acyclic dibenzopolyether diamides

Lipophilic acyclic dibenzopolyether diamides, 12 kinds, have been designed to prepare solvent polymeric membrane ion-selective electrodes (ISEs) for Pb(2+). The ionophores include 1,5-bis[2-(N,N-dialkylcarbamoylmethoxy)phenoxy]-3-oxapentanes1-4, 1,5-bis[2-(N,N-dialkylcarbamoylpentadecyloxy)phenoxy]-3-oxapentanes 5-8, and 1,2-bis[2-(2'-N,N-dialkylcarbamoylpentadecyloxy)phenoxy]ethanes 9-12. Linear response concentration range of the ISE based on 9 is 3 x 10(-2) - 1 x 10(-6) M of Pb(2+) (average slope = 28.5 mV decade(-1)). Potentiometric selectivities of the ISEs based on 1-12 for Pb(2+) over other heavy metal cations, alkali metal cations, and alkaline earth metal cations have been assessed. These ISEs exhibit remarkably high selectivities for Pb(2+) relative to heavy metal cations, such as Cu(2+), Fe(2+), and Ni(2+), the selectivity coefficients (K(Pot)(Pb,Cu)) being 5 x 10(-5) - 6 x 10(-5) for 1-4 and ca. 6 x 10(-4) for 9. For the Pb(2+) selectivities over alkali metal cations, such as Na(+) and K(+), 9 which has an ethylene glycol spacer and a N,N-diethyl group is superior to other dibenzopolyether diamide ionophores 1-8 and 10-12.     

A study of the effect of proteins and endogenous cations on a lipophilic beta-cyclodextrin-based potentiometric lidocaine sensor using discrete solution and flow-injection analysis

2,6 Didodecyl beta cyclodextrin (2,6ddbetaCD) modified ion-selective electrodes (ISEs) were used in discrete solutions and in a flow injection analysis manifold for monitoring the local anaesthetic lidocaine hydrochloride (lignocaine) in the presence of endogenous cations and proteins. Membrane matrices comprised of either high molecular weight poly (vinyl chloride) (PVC) or polyurethane (Tecoflex SG 80) were compared. The behaviour of these electrodes in the presence of bovine serum albumin (BSA), alpha(1) acid glycoprotein (AAG) and human serum (HS) indicate that the Tecoflex-based membrane matrices are preferable to PVC as the drift induced by proteins on baseline lines and peak height reproducibility was considerably reduced in the former. Interference from 'serum' levels of sodium, potassium and calcium (145 mmol dm(-3) Na(+), 1.26 mmol dm(-3) Ca(2+), 4.30 mmol dm(-3) K(+)) was negligible (-Log K(ij)(POT) (overall) >/=4.0). The major organic interferents were molecules of similar size and structure, which caused reduced slope and drift in baseline potentials, at equimolar concentration levels. A reduction in interferent concentration by a factor of 10 negated these effects.     

A metallic cobalt electrode for the indirect potentiometric determination of calcium and magnesium in natural waters using flow injection analysis

A flow injection analysis of Ca(2+) and Mg(2+) using indirect potentiometric detection in natural waters is proposed, where Ca(2+) or Mg(2+) are injected into a buffer carrier containing phosphate, resulting in the formation of Ca(3)(PO(4))(2) or Mg(3)(PO(4))(2). The consequent reduction in free phosphate in the carrier solution is detected using a metallic cobalt wire electrode. Indirect electrode response was used and the experimental conditions affecting electrode response were optimized. Responses were linear in the concentration range 5x10(-4) to 5x10(-3) M with a detection limit of 1x10(-5) M in 20 mM phosphate buffer at pH 8.0. The relative standard derivation at 1 mM of Ca(2+) and Mg(2+) were 3.9 and 3.7% (n=10), respectively. EGTA and 8-hydroxyquinoline were used as the masking agents for Ca(2+) and Mg(2+), respectively. Concentrations of Ca(2+) and Mg(2+) in natural waters were successfully determined by the proposed method.     

Indirect spectrophotometric determination of sulphide with the ternary complex system Ag(I)-phen-BPR

Trace amounts of sulphide can be determined from its effect on the ternary complex system of Ag(+), Bromopyrogallol Red (BPR), and 1,10-phenanthroline (phen). Sulphide in the range 5-120 ng/ml causes a decrease in absorption, that is a linear function of the concentration. Common metal ions such as Na(+), K(+), Ca(2+), Mg(2+), Al(3+), Mn(2+) and anions such as F(-), Cl(-), NO(-)(3), SO(2-)(4), CO(2-)(3), and PO(3-)(4) at the 4 mug/ml level or more do not interfere, but I(-) or CN(-) must be absent.     

Interactions of diethylenetriaminepentaacetic acid (dtpa) and triethylenetetraaminehexaacetic acid (ttha) with major components of natural waters

The binding ability of diethylene triamine pentaacetate (dtpa(5-)) and triethylene tetraamine hexaacetate (ttha(6-)) ligands towards major components, H(+), Na(+), Mg(2+) and Ca(2+), of natural waters was studied in both single and mixed ionic media at different ionic strengths and at T=25 degrees C. Some measurements, performed in Mg(2+)-Ca(2+) mixtures, allowed us to find the formation of new mixed species MgCa(dtpa), MgCa(ttha) and MgCaH(ttha), here reported for the first time. All the complexes formed in the various systems were characterized in terms of both stoichiometry and stability, and an attempt was made to find general rules for the stability of mixed metal complexes in comparison with that of simple species. To obtain quantitative information on the complexing ability of dtpa and ttha in seawater, measurements have been carried out in artificial seawater ionic medium (Na(+), K(+), Ca(2+), Mg(2+), Cl(-) and SO(4)(2-)). Calculations, performed by considering the salt mixture as single salt BA, allowed us to find some quite stable B(i)H(j)L species. Under the natural seawater conditions [S(salinity)=35], we found for the most important species logbeta( B(dtpa))=9.64 and. Literature data comparison is also reported.     

Colorimetric detection of Fe3+ ions using pyrophosphate functionalized gold nanoparticles

A sensitive, selective colorimetric Fe(3+) detection method has been developed by using pyrophosphate functionalized gold nanoparticles (P(2)O(7)(4-)-AuNPs). Gold nanoparticles were prepared by reducing HAuCl(4) with sodium borohydride, in the presence of Na(4)P(2)O(7). IR spectra suggested that pyrophosphates were capped on the surface of the gold nanoparticles. Aggregation of P(2)O(7)(4-)-AuNPs was induced immediately in the presence of Fe(3+) ions, yielding a color change from pink to violet. This Fe(3+)-induced aggregation of P(2)O(7)(4-)-AuNPs was monitored using first the naked eye and then UV-vis spectroscopy with a detection limit of 5.6 μM. The P(2)O(7)(4-)-AuNPs bound by Fe(3+) showed excellent selectivity compared to other metal ions (Ca(2+), Cd(2+), Co(2+), Fe(2+), Hg(2+), K(+), Mg(2+), Mn(2+), Na(+), Ni(2+), Pb(2+), and Zn(2+)). The best detection of Fe(3+) was achieved in a pH range from 3 to 9. In addition, the P(2)O(7)(4-)-AuNPs were also used to detect Fe(3+) in lake water samples, with low interference.     

Dual-mode unsymmetrical squaraine-based sensor for selective detection of Hg2+ in aqueous media

A novel chemosensor based on unsymmetrical squaraine dye (USQ-1) for the selective detection of Hg(2+) in aqueous media is described. USQ-1 in combination with metal ions shows dual chromogenic and "turn-on" fluorogenic response selectivity toward Hg(2+) as compared to Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ba(2+), Al(3+), Cu(2+), Cd(2+), Mn(2+), Fe(3+), Ag(+), Pb(2+), Zn(2+), Ni(2+) and Co(2+) due to the Hg(2+)-induced deaggregation of the dye molecule. A recognition mechanism based on the binding mode is proposed based on the absorption and fluorescence changes, (1)H NMR titration experiments, ESI-MS study, and theoretical calculations.     

Selective colorimetric and fluorometric sensing of Cu(II) by iminocoumarin derivative in aqueous buffer

A new iminocoumarin based receptor L (C(27)H(26)N(4)OS) is synthesized with pyridyl and benzothiazolyl functionality. Synthesis of L is easy and it is isolated in good yield. L shows a selective and distinct color change from yellow to orange with Cu(2+) over Li(+), Na(+), Ca(2+), Mg(2+), Cr(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Pb(2+), and Ag(+) whereas a slight change in color is also observed in the case of Hg(2+) but L shows selective fluorescent quenching only in the presence of Cu(2+) in aqueous HEPES buffer (pH 7.0). The naked eye detection limit of Cu(2+) is determined at 2 μM whereas an emission experiment shows a lower detection limit at 200 nM. Selectivity studies of L in presence of 50 equivalents of other ion(s) by emission experiment show no interference toward the detection of 1 equivalent of Cu(2+). Both UV-Vis and fluorescence studies in the presence of Cu(2+)-salts of different counter anions with various sizes and shapes (Cl(-), ClO(4)(-), NO(3)(-), CF(3)SO(3)(-), SO(4)(2-) and BF(4)(-)) show almost similar spectral output in buffer media irrespective of the nature of the counter anions. The detailed UV-Vis and fluorescence titration experiments suggest the existence of both 1:1 and 2:1 (L:Cu(2+)) complexation stoichiometry and EPR study shows d(x(2)-y(2)) ground state of the Cu(II) centre in the complex. Furthermore the formation of a mononuclear [Cu(L)(CH(3)CN)].2ClO(4) complex and the flexible conformation of L in the solid state are confirmed by the single-crystal X-ray structural study.     

Effect of metal ions (Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) and water coordination on the structure and properties of L-arginine and zwitterionic L-arginine

Interactions between metal ions and amino acids are common both in solution and in the gas phase. The effect of metal ions and water on the structure of L-arginine is examined. The effects of metal ions (Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ni(2+), Cu(2+), and Zn(2+)) and water on structures of Arg x M(H2O)m , m = 0, 1 complexes have been determined theoretically by employing the density functional theories (DFT) and using extended basis sets. Of the three stable complexes investigated, the relative stability of the gas-phase complexes computed with DFT methods (with the exception of K(+) systems) suggests metallic complexes of the neutral L-arginine to be the most stable species. The calculations of monohydrated systems show that even one water molecule has a profound effect on the relative stability of individual complexes. Proton dissociation enthalpies and Gibbs energies of arginine in the presence of the metal cations Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ni(2+), Cu(2+), and Zn(2+) were also computed. Its gas-phase acidity considerably increases upon chelation. Of the Lewis acids investigated, the strongest affinity to arginine is exhibited by the Cu(2+) cation. The computed Gibbs energies DeltaG(o) are negative, span a rather broad energy interval (from -150 to -1500 kJ/mol), and are appreciably lowered upon hydration.     

Spectral characterization of a newly synthesized fluorescent semicarbazone derivative and its usage as a selective fiber optic sensor for copper(II)

In this work photoluminescent properties of highly Cu(2+) selective organic fluoroionophore, semicarbazone derivative; bis(naphtho[2,1-b]furan-2-yl)methanone semicarbazone (BNF) was investigated in different solvents (dichloromethane, tetrahydrofuran, toluene and ethanol) and in polymer matrices of polyvinylchloride (PVC) and ethyl cellulose (EC) by absorption and emission spectrometry. The BNF derivative displayed enhanced fluorescence emission quantum yield, Q(f)=6.1 x 10(-2) and molar extinction coefficient, epsilon=29,000+/-65 cm(-1)M(-1) in immobilized PVC matrix, compared to 2.6 x 10(-3) and 24,573+/-115 in ethanol solution. The offered sensor exhibited remarkable fluorescence intensity quenching upon exposure to Cu(2+) ions at pH 4.0 in the concentration range of 1.0 x 10(-9) to 3.0 x 10(-4)M [Cu(2+)] while the effects of the responding ions (Ca(2+), Hg(+), Pb(2+), Al(3+), Cr(3+), Mn(2+), Mg(2+), Sn(2+), Cd(2+), Co(2+) and Ni(2+)) were less pronounced.     

Hg2+-sensing system based on structures of complexes

The first example of a new Hg(2+)-sensing system based on the structures of complexes is reported. The system uses a combination of a new chiral bidentate ligand and CD spectroscopy. Significant CD spectral changes are observed when Hg(2+) is added, whereas no CD spectral changes are observed in the cases of Li(+), Na(+), K(+), Mg(2+), Ca(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Rb(+), Ag(+), Cd(2+), La(3+), Gd(3+), and Pb(2+).     

Atropine-selective membrane electrodes and relative selectivity concept

TFPB was introduced as a charged ionophore for atropine selective electrodes. Typical Nernstian responses were found (57.78, 58.95 and 58.41 mV/decade) for PVC-membrane electrodes incorporating NPOE, DOS, and DDP as plasticizers. They exhibited practical linear ranges of 9.1 x 10(-3) - 10(-6), 9.1 x 10(-3) - 10(-6) and 9.1 x 10(-3) - 10(-7) M, respectively. It works in the sub-micro scale of atropine concentrations. The optimum pH-range was 3.18 - 8.97. The selectivity coefficient values were estimated for different organic and inorganic cations. They were interpreted by using the "Relative Selectivity Concept", which was introduced for the first time. The new concept was applied for comparing the selectivity properties of previously reported electrodes. The effect of the presence of ephedrine, caffeine, glucose, Na(+), Ca(2+), and Mg(2+) on the calibration graphs of the electrodes was studied.     

Theoretical study of interaction of urate with li(+), na(+), k(+), be(2+), mg(2+), and ca(2+) metal cations

The geometries and energetics of complexes of Li(+), Na(+), K(+), Be(2+), Mg(2+), and Ca(2+)metal cations with different possible uric acid anions (urate) were studied. The complexes were optimized at the B3LYP level and the 6-311++G(d,p) basis set. Complexes of urate with Mg(2+), and Ca(2+)metal cations were also optimized at the MP2/6-31+G(d) level. Single point energy calculations were performed at the MP2/6-311++G(d,p) level. The interactions of the metal cations at different nucleophilic sites of various possible urate were considered. It was revealed that metal cations would interact with urate in a bi-coordinate manner. In the gas phase, the most preferred position for the interaction of Li(+), Na(+), and K(+) cations is between the N(3) and O(2) sites, while all divalent cations Be(2+), Mg(2+), and Ca(2+) prefer binding between the N(7) and O(6) sites of the corresponding urate. The influence of aqueous solvent on the relative stability of different complexes has been examined using the Tomasi's polarized continuum model. The basis set superposition error (BSSE) corrected interaction energy was also computed for complexes. The AIM theory has been applied to analyze the properties of the bond critical points (electron densities and their Laplacians) involved in the coordination between urate and the metal cations. It was revealed that aqueous solvation would have significant effect on the relative stability of complexes obtained by the interaction of urate with Mg(2+) and Ca(2+)cations. Consequently, several complexes were found to exist in the water solution. The effect of metal cations on different NH and CO stretching vibrational modes of uric acid has also been discussed.     

A naphthalene-based Al3+ selective fluorescent sensor for living cell imaging

An efficient fluorescent Al(3+) receptor, N-(2-hydroxy-1-naphthalene)-N'-(2-(2-hydroxy-1-naphthalene)amino-ethyl)-ethane-1,2-diamine (L) has been synthesized by the condensation reaction between 2-hydroxy naphthaldehyde and diethylenetriamine. High selectivity and affinity of L towards Al(3+) in ethanol (EtOH) as well as in HEPES buffer at pH 7.4, makes it suitable to detect intracellular Al(3+) with fluorescence microscopy. Metal ions, viz. Li(+), Na(+), K(+), Mg(2+), Ca(2+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Ag(+), Cd(2+), Hg(2+) and Pb(2+) do not interfere. The lowest detection limit for Al(3+) is 3.0 × 10(-7) M and 1.0 × 10(-7) M in EtOH and HEPES buffer respectively.     

Competitive cesium-133 NMR spectroscopic study of complexation of different metal ions with dibenzo-21-crown-7 in acetonitrile-dimethylsulfoxide and nitromethane-dimethylsulfoxide mixtures

(133)Cs NMR spectroscopy was used to determine the stoichiometry and stability of the Cs(+) ion complex with dibenzo-21-crown-7 (DB21C7) in acetonitrile-dimethylsulfoxide (96.5:3.5, w/w) and nitromethane-dimethylsulfoxide (96.5:3.5, w/w) mixtures. A competitive (133)Cs NMR technique was also employed to probe the complexation of Na(+), K(+), Rb(+), Ag(+), Tl(+), NH(4)(+), Mg(2+), Ba(2+), Hg(2+), Pb(2+) and UO(2)(2+) ions with DB21C7 in the same solvent systems. All the resulting 1:1 complexes in nitromethane-dimethylsulfoxide were more stable than those in acetonitrile-dimethylsulfoxide solution. In both solvent systems, the stability of the resulting complexes was found to vary in the order Rb(+)>K(+) approximately Ba(2+)>Tl(+)>Cs(+)>NH(4)(+) approximately Pb(2+)>Ag(+)>UO(2)(2+)>Hg(2+)>Mg(2+)>Na(+).     

Oxidative cyclization of thiosemicarbazone: an optical and turn-on fluorescent chemodosimeter for Cu(II)

A weakly fluorescent thiosemicabazone (L(1)H) was found to be a selective optical and "turn-on" fluorescent chemodosimeter for Cu(2+) ion in aqueous medium. A significant fluorescence enhancement along with change in color was only observed for Cu(2+) ion; among the other tested metal ions (viz. Na(+), K(+), Mg(2+), Ca(2+), Cr(3+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), Ag(+), Ni(2+), Co(2+), Fe(3+) and Mn(2+)). The Cu(2+) selectivity resulted from an oxidative cyclization of the weak fluorescent L(1)H into highly fluorescent rigid 4,5-dihydro-5,5-dimethyl-4-(naphthalen-5-yl)-1,2,4-triazole-3-thione (L(2)). The signaling mechanism has been confirmed by independent synthesis with detail characterization of L(2).     

Dissection of the difference between the group I metal ions in inhibiting GSK3β: a computational study

Glycogen synthase kinase 3β (GSK3β) is a serine/threonine kinase that requires two cofactor Mg(2+) ions for catalysis in regulating many important cellular signals. Experimentally, Li(+) is a competitive inhibitor of GSK3β relative to Mg(2+), while this mechanism is not experienced with other group I metal ions. Herein, we use native Mg(2)(2+)-Mg(1)(2+) GSK3β and its Mg(2)(2+)-M(1)(+) (M = Li, Na, K, and Rb) derivatives to investigate the effect of metal ion substitution on the mechanism of inhibition through two-layer ONIOM-based quantum mechanics/molecular mechanics (QM/MM) calculations and molecular dynamics (MD) simulations. The results of ONIOM calculations elucidate that the interaction of Na(+), K(+), and Rb(+) with ATP is weaker compared to that of Mg(2+) and Li(+) with ATP, and the critical triphosphate moiety of ATP undergoes a large conformational change in the Na(+), K(+), and Rb(+) substituted systems. As a result, the three metal ions (Na(+), K(+), and Rb(+)) are not stable and depart from the active site, while Mg(2+) and Li(+) can stabilize in the active site, evident in MD simulations. Comparisons of Mg(2)(2+)-Mg(1)(2+) and Mg(2)(2+)-Li(1)(+) systems reveal that the inline phosphor-transfer of ATP and the two conserved hydrogen bonds between Lys85 and ATP, together with the electrostatic potential at the Li(1)(+) site, are disrupted in the Mg(2)(2+)-Li(1)(+) system. These computational results highlight the possible mechanism why Li(+) inhibits GSK3β.