新型梳状聚合物电解质的离子导电性 Ⅱ.侧链是分子量为550的聚乙二醇单甲醚

以乙烯／马来酸酐共聚物为骨架，聚乙二醇单甲醚（Ｍ＝５５０）为侧链，通过两步酯化，合成了梳状乙烯／马来酸酐共聚物多缩乙二醇酯，用ＩＲ、元素分析、交流复阻抗谱等对产物及其ＬｉＣｌＯ４盐复合物进行了研究。结果表明：所合成的产物为非晶的梳状聚合物，并严格按反应方程式生成半酯。盐浓度与电导率的关系在所研究的浓度范围内存在两个峰，一峰在Ｏ／Ｌｉ＋＝８；另一峰在Ｏ／Ｌｉ＋＝３０。用侧链ＰＥＯ玻璃化转变温度作Ｔ０，以ｌｏｇσ对１／Ｔ－Ｔ０作图，电导率与温度关系呈典型的ＶＴＦ行为，该体系室温电导率最高可达２．５８×１０－５Ｓ／ｃｍ。     

含有添加剂及LiClO_4的接枝聚酯网络的离子导电性能研究

研究了碳酸丙烯酯（添加量５％）与γ－丁内酯（添加量１０％）对由数均分子量为８００的聚氧化乙烯（ＰＥＯ８００）大单体交联不饱和聚酯（含ＬｉＣｌＯ４）形成的接枝聚酯网络的离子导电性能影响，发现其电导率主要取决于体系中的ＬｉＣｌＯ４浓度．当［ＥＯ链节］／［Ｌｉ＋］＝３０时，室温电导率达最大值，σ２９８Ｋ＝（４．０—４．５）×１０－５Ｓｃｍ－１．这类接枝聚酯网络的玻璃化转变温度（Ｔｇ）同样取决于盐类浓度，而与网络的交联程度无关．网络中的极性添加剂并不显著影响其交联程度与Ｔｇ，但较大幅度提高离子导电性能，这可能与极性添加剂加速载荷离子在导电通道中的迁移性有关．若在上述接枝网络中引入环氧树脂网络，形成接枝聚合物互穿网络，则成膜后的机械强度有进一步提高，同时具有优良的室温电导率，σ２９８Ｋ＝２．４×１０－５Ｓｃｍ－１。     

新型梳状聚合物电解质的离子导电性：Ⅱ.侧链是分子量为550的？…

以乙烯／马来西酐共聚物为骨架，聚乙二醇单甲醚为侧链，通过两步酯化，合成了梳状乙烯／马来酸酐共聚物多缩乙二醇酯，用ＩＲ，元素分析，交流复阻抗谱等对产物及其ＬｉＣｌＯ４盐复合物进行了研究。结果表明：所合成的产物为非晶的梳状聚合物，并严格按反庆方程式生成半酯。盐浓度与电导率的关系在所研究的浓度范围内存在两仃峰，一峰在Ｏ／Ｌｉ＾＋＝８，另一峰在Ｏ／Ｌｉ＾＋＝３０。     

无定形梳状高分子固体电解质的二重玻璃化转变及典型VTF…

研究了交替马酸酐共聚物多缩乙二醇酯（ＣＰ３５０）－ＬｉＮＯ３络合物的热行为及离子导电性。实验表明：ＣＰ３５０／ＬｉＮＯ３络合物在所研究的［Ｌｉ］／［ＥＯ］配比范围呈均相无定形并具有二重玻璃化转变。２个玻璃化转变温度均随盐含量的增加而上升。离子电导率随盐浓度的变化出现１个极大值，室温电导率最大可达３．７２×１０＾－５Ｓ／ｃｍ。导电行为呈典型ＶＴＦ特征。     

聚对苯二甲酸乙二酯溶剂诱导结晶研究 Ⅲ．溶剂对聚对苯二甲酸乙二酯玻璃化转变温度的影响

应用动态力学方法测定了聚对苯二甲酸乙二酯ＰＥＴ／溶剂体系的粘弹谱，从实验上证实溶剂对ＰＥＴ进行增塑，使其玻璃化转变温度降低，导致ＰＥＴ在低于通常的结晶温度下结晶，甚至在室温便进行结晶，证明溶剂诱导结晶是由于玻璃化转变温度降低的机理是正确的，可接受的．     

维生素K3亚硫酸氢钠的电化学研究

维生素Ｋ３亚硫酸氢钠在０．１ｍｏｌ／ＬＮａＣｌ＋０．０４ｍｏｌ／ＬＨＣｌ，ｐＨ＝１．８０底液中，于示波极谱仪上有一良好的二阶导数波，Ｅ″Ｐ＝－０．７４±０．０１Ｖ（ＳＣＥ），峰高与浓度在５×１０－９～１×１０－６ｍｏｌ／Ｌ以及１×１０－６～１×１０－５ｍｏｌ／Ｌ分段成线性关系，检测下限为１×１０－９ｍｏｌ／Ｌ，用于针剂含量的测定，结果良好。实验证明，当ｐＨ小于３．５９时，维生素Ｋ３亚硫酸氢钠逐渐转变为维生素Ｋ３亚硫酸，出现三个极谱峰，其中用于分析测定的峰为维生素Ｋ３亚硫酸１号位羰基的还原峰，其电极过程为扩散控制的可逆的双电子过程。     

哌仑西平的单扫描示波极谱法测定

本报道一种测定哌仑西平的单扫描示波极谱法，在０．１ｍｏｌ／ＬＮＨ４Ｃｌ－ＮＨ３．Ｈ２Ｏ（ｐＨ８．０±０．１）缓冲液中，哌仑西平有一极谱还原波，其峰电位为－１．５１Ｖ（ｖｓ．ＳＣＥ），其一阶导数峰高与哌仑西闰浓度在６．６×１０＾－７－４．６×１０＾－６ｍｏｌ／Ｌ（ｒ＝０．９９８１）和６．６×１０＾－６－１．６×１０＾－５ｍｏｌ／Ｌ（ｒ＝０．９９９１）范围内有线性关系，检测限为３．４×１０－７ｍｏｌ     

高分子凝胶电解质高氯酸锂 - 碳酸乙二醇酯 - 聚甲基丙烯酸甲酯体系的研究

研究了高分子凝胶电解质高氯酸锂 碳酸乙二醇酯 聚甲基丙烯酸甲酯体系（ＬｉＣｌＯ４ ＥＣ ＰＭＭＡ）的离子导电性、热稳定性和电化学稳定性．该体系的离子电导率与温度的关系服从ＶＴＦ方程．当ＬｉＣｌＯ４的浓度ＣＬｉＣｌＯ４＝１５ｍｏｌ／Ｌ、ＰＭＭＡｗｔ％（质量百分数）＝３５时，其离子电导率达极大值δ＝１９２×１０－３Ｓ／ｃｍ，光学透明度高，在空气中的稳定性较好，且具有一定的粘附性．该体系在１０２℃以下的热稳定性较高（失重率为３２８％）；电化学稳定性窗口为４５Ｖ，可满足固态电致变色“Ｓｍａｒｔ”窗的要求．     

聚对苯二甲酸乙二酯溶剂诱导结晶研究 Ⅲ．溶剂对聚对苯二甲酸乙二酯玻璃化转变温度的影响

应用动态力学方法测定了聚对苯二甲酸乙二酯ＰＥＴ／溶剂体系的粘弹谱，从实验上证实溶剂对ＰＥＴ进行增塑，使其玻璃化转变温度降低，导致ＰＥＴ在低下通常的结晶温度下结晶，甚至在室温便进行结晶，证明溶剂诱导结晶是由于玻璃化转变温度降低的机理是正确的。可接受的。     

三水合希土氯化物(镨、钆)与18－冠－6配合物的热化学研究

制备了ＲＥＣｌ３．３Ｈ２Ｏ（ＲＥ＝Ｐｒ，Ｇｄ）与１８Ｃ６的固态配合物，其化学组成为：ＲＥＣｌ３，１８Ｃ６．３Ｈ２Ｏ。对其进行了ＩＲ，溶解度、ＤＴＧ和ＴＧ分析，推测了热分解机理，测量了２９８．１５Ｋ时１８Ｃ６及两种配合物在无水乙醇中的积分，及ＲＥＣｌ３，３Ｈ２Ｏ在１８Ｃ６－Ｃ２Ｈ２ＯＨ溶液中的溶解配位热效应，依据本文所设计的热化学循环，求得了ＲＥＣｌ３，３Ｈ２Ｏ（ｓ）与１８Ｃ６（ｓ）生成ＲＥＣｌ３，     

梳状高分子固体电解质的离子导电性研究

深入研究了交替马来酸酐共聚物多缩乙二醇酯（ＣＰ３５０）两种锂盐络合物ＣＰ３５０／ＬｉＡｓＦ＿６和ＣＰ３５０／ＬｉＰＦ＿６的离子传导性能,给出了与复阻抗谱相对应的等效电路．离子电导率随［Ｌｉ］／［ＥＯ］的变化而出现一极大值,室温下,两体系电导率极大值分别为１．３８×１０（－４）,８．３２×１０（－５）Ｓ／ｃｍ．电导率随温度升高而增加．导电行为呈非－Ａｒｒｈｅｎｉｕｓ特征．阴阳离子半径之和（ｒ＿ｃ＋ｒ＿ａ）愈大,离子电导率愈高．     

Conductivity–modulus–Tg relationships in solvent-free,single lithium ion conducting network electrolytes

A model system of single-ion conducting network electrolytes with acrylic backbone, ethylene oxide (EO) side chains, tethered fluorinated anions, and mobile Li cations was designed and synthesized to investigate structure–property relationships. By systematically tuning four molecular variables, one at a time, we investigated how crosslinker length, mol% of crosslinker added, Li:EO ratio and side-chain length affect conductivity, T_g, and modulus. Ionic conductivity at 90 °C varied by two orders of magnitude (and by three orders of magnitude at room temperature) depending on the molecular details, while a 70 °C span in glass transition temperature (T_g) was observed. The range of crosslinking, which can be achieved without impacting conductivity was also elucidated, and the modulus of the electrolyte can be increased by a factor of 8, up to 2.4 MPa, without impacting ion transport. Changes in conductivity due to crosslink density and crosslinker length are fully explained in terms of T_g shifts, while comonomer length cannot be accounted for by such a shift. The best performing network exhibited 10⁻⁵ S/cm at high temperature, which is comparable to other single-ion conductors reported in the literature, while the modulus is higher due to crosslinking. Adding 10 wt% propylene carbonate further increased this value to 10⁻⁴ S/cm. This work provides insights into the structure–property relationships of solid-state polymer electrolytes, which retain conductivity but can potentially help suppress dendrites.     

主链玻璃化转变区在室温附近的梳形聚合物电解质

主链玻璃化转变区在室温附近的梳形聚合物电解质＊齐力林云青夏永姚王佛松（中国科学院长春应用化学研究所长春１３００２２）关键词梳状高分子，固体电解质，离子导电性，玻璃化转变，分子运动＊１９９４－１０－３０收稿；１９９５－１２－１０修稿７３２高分子固体电解...     

Ionic conductivity of multiarm star polymer/LiClO4 electrolytes

A series of polymer electrolytes based on multiarm polymers and lithium salt complexes were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and impedance measurement. The relationships of conductivity with salt concentration, temperature, and arm numbers are discussed. It is suggested that the star polymer has a higher solvency and ion transfer ability on lithium salts than on linear polymers. The conductivity maximum appeared at a higher salt concentration ([EO]/[Li] = 4). Impedance measurement suggested that the optimum conductivity was 2 × 10^?4 s · cm^?1. The conductivity increased with temperature and the dependence of ionic conductivity on temperature fits the Arrhenius equation. Among the studied systems, the star polymer with a five arm number performs better than other structures. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4195–4198, 2004     

无定形梳状高分子固体电解质的二重玻璃化转变及典型VTF特征

研究了交替马来酸酐共聚物多缩乙二醇酯(CP350)-LiNO₃络合物的热行为及离子导电性。实验表明:CP350/LiNO₃络合物在所研究的[Li]/[EO]配比范围呈均相无定形并具有二重玻璃化转变。2个玻璃化转变温度均随盐含量的增加而上升。离子电导率随盐浓度的变化出现1个极大值,室温电导率最大可达3.72×10^-5S/cm.导电行为呈典型VTF特征。     

Large electro‐optic activity and enhanced temporal stability of methacrylate‐based crosslinking hyperbranched nonlinear optical polymer

A methacrylate‐based crosslinking hyperbranced polymers have been synthesized through initiator‐fragment incorporation radical polymerization and used for the temperature stable electro‐optic (EO) polymer application. This polymer consists of methyl methacrylate, 2‐metacryloxyethyl isocyanate, and ethylene glycol dimethacrylate (EGDMA) monomers. The use of EGDMA as a bifunctional unit resulted in the solvent‐soluble crosslinking hyperbranched chain, so that the EO polymer enhanced glass transition temperatures. A phenyl vinylene thiophene vinylene bridge nonlinear optical chromophore was attached to the polymer backbone as the side‐chain by a post‐functionalization reaction. The loading concentration of the chromophore was varied between 30 and 50 wt % by simply changing the mixing ratio of the precursor polymer to the chromophore. The synthesized EO polymers produced optical quality films with a light propagation loss of 0.61 dB/cm in a slab waveguide at 1.31 μm. The electrically poled film had an EO coefficient (r₃₃) of 139 pm/V at 1.31 μm. The EO crosslinking hyperbranced polymer had a high‐glass transition temperature of 170 °C, and exhibited excellent temporal stability of the EO activity at 85 °C for 500 h. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of novel polyarylate with elecrooptical chromophores as side chain as electro-optic host polymer

Two novel soluble polyarylates with different nonlinear optical chromophores as the side chains were prepared and characterized by UV–visible spectra, nuclear magnetic resonance, and infrared spectroscopy. The titled polymers show us good thermal stability; the thermal decomposition temperature values were 201 and 253?°C, respectively, for polymer sPAR-CTCF and sPAR-CTCP. The glass transition temperatures were 139 and 122?°C for sPAR-CTCF and sPAR-CTCP, respectively. Chromophore FTC-wl was doped in these polymers as a guest chromophore to form binary chromophore electro-optic (EO) system. And super large EO coefficients (124?pm/V) were found from FTC-wl-doped sPAR-CTCP binary chromophore system at high chromophore loading density.     

Single-ion and salt conductor polymer electrolytes based on poly(4-vinylpyridine) quaternized with poly(ethylene oxide) side chains

A new type of single-ion conductor with fixed cation was synthesized by spontaneous anionic polymerization of 4-vinylpyridine in the presence of short polyethylene oxide ( PEO ) chains as alkylating agents. These comblike polymers have low T_gs and are amorphous with the shorter PEO s. Their conductivities are unaffected by the nature of the anion ( Br ⁻, ClO ₄⁻, and tosylate) and are controlled by the free volume and the mobility of the pendant cation. By comparison of the results at constant free volume, it is shown that the charge density decreases with the increasing length of pendant PEO demonstrating that PEO acts only as a plasticizing agent. Best conductivity results (σ = 10⁻⁵ S cm⁻¹ at 60°C) are obtained with PEO side chains of molecular weight 350. With this sample, the conductivity in the presence of various amounts of added salt (LiTFSI) was studied. A best value of 10⁻⁴ S cm⁻¹ at 60°C is obtained with a molar ratio EO/Li of 10. It is shown that, over the range of examined concentrations (0.2–1.3 mol Li kg⁻¹), the reduced conductivity σ_r/c increases linearly with increasing salt concentration showing that the ion mobility increases continuously. Such behavior is quite unusual since in this concentration range a maximum is generally observed with PEO systems. To interpret this result and by analogy with the behavior of this type of polymer in solution, it is proposed that the conformation of these polymers in the solid state is segregated with the P4VP skeleton more or less confined inside the dense coils surrounded by the PEO side chains. Under the influence of the increasing salt concentration, this microphase separation vanishes progressively: The LiTFSI salt exchanges with the tosylate anions and acts as a miscibility improver agent. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2719–2728, 1997     

超支化聚氨酯固体电解质导电性能的光谱学研究

用超支化聚氨酯 +线性聚氨酯作为基体 ,LiClO4作为离子源制得聚合物固体电解质 .用Raman光谱 ,FTIR光谱等光谱学方法研究了聚合物电解质中盐离子和聚合物基团之间的相互作用 .研究表明超支化聚氨酯对盐有较好的溶解作用 .研究还表明超支化聚氨酯加入有利于提高体系的电导率     

Solid polymer electrolytes. IV. Preparation and characterization of novel crosslinked epoxy‐siloxane polymer complexes as polymer electrolytes

Two series of novel crosslinked siloxane‐based polymers and their complexes with lithium perchlorate (LiClO₄) were prepared and characterized by Fourier transform infrared spectroscopy, solid‐state NMR (¹³C, ²⁹Si, and ⁷Li nuclei), and differential scanning calorimetry. Their thermal stability and ionic conductivity of these complexes were also investigated by thermogravimetric and AC impedance measurements. In these polymer networks, poly(propylene oxide) chains with different molecular weights were introduced through self‐synthesized epoxy‐siloxane precursors cured with two curing agents. The glass‐transition temperature (T_g) of these copolymers is dependent on the length of the ether units. The dissolution of LiClO₄ considerably increases the T_g of the polyether segments. The dependence of the ionic conductivity was investigated as a function of temperature, LiClO₄ concentration, and the molecular weight of the polyether segments. The ion‐transport behavior was affected by the combination of the ionic mobility and number of carrier ions. The ⁷Li solid‐state NMR line shapes of these polymer complexes suggest a significant interaction between Li⁺ ions and the polymer matrix, and temperature‐ and LiClO₄ concentration‐dependent chemical shifts are correlated with ionic conductivity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1226–1235, 2002