High-surface-area catalyst design: Synthesis, characterization, and reaction studies of platinum nanoparticles in mesoporous SBA-15 silica

Platinum nanoparticles in the size range of 1.7-7.1 nm were produced by alcohol reduction methods. A polymer (poly(vinylpyrrolidone), PVP) was used to stabilize the particles by capping them in aqueous solution. The particles were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). TEM investigations demonstrate that the particles have a narrow size distribution. Mesoporous SBA-15 silica with 9-nm pores was synthesized by a hydrothermal process and used as a catalyst support. After incorporation into mesoporous SBA-15 silica using low-power sonication, the catalysts were calcined to remove the stabilizing polymer from the nanoparticle surface and reduced by H2. Pt particle sizes determined from selective gas adsorption measurements are larger than those determined by bulk techniques such as XRD and TEM. Room-temperature ethylene hydrogenation was chosen as a model reaction to probe the activity of the Pt/SBA-15 materials. The reaction was shown to be structure insensitive over a series of Pt/SBA-15 materials with particle sizes between 1.7 and 3.6 nm. The hydrogenolysis of ethane on Pt particles from 1.7 to 7.1 nm was weakly structure sensitive with smaller particles demonstrating higher specific activity. Turnover rates for ethane hydrogenolysis increased monotonically with increasing metal dispersion, suggesting that coordinatively unsaturated metal atoms present in small particles are more active for C2H6 hydrogenolysis than the low index planes that dominate in large particles. An explanation for the structure sensitivity is suggested, and the potential applications of these novel supported nanocatalysts for further studies of structure-activity and structure-selectivity relationships are discussed.     

Adsorption and co-adsorption of ethylene and carbon monoxide on silica-supported monodisperse Pt nanoparticles: volumetric adsorption and infrared spectroscopy studies

The adsorption of carbon monoxide and ethylene, and their sequential adsorption, was studied over a series of Pt/SBA-15 catalysts with monodisperse particle sizes ranging from 1.7 to 7.1 nm by diffuse-reflectance infrared spectroscopy and chemisorption. Gas adsorption was dependent on the Pt particle size, temperature, and sequence of gas exposure. Adsorption of CO at room temperature on Pt/SBA-15 gives rise to a spectroscopic feature assigned to the C-O stretch: nu(CO) = 2075 cm-1 (1.9 nm); 2079 cm-1 (2.9 nm); 2082 cm-1 (3.6 nm); and 2090 cm-1 (7.1 nm). The intensity of the signal decreased in a sigmoidal fashion with increasing temperature, thereby providing semiquantitative surface coverage information. Adsorption of ethylene on Pt/SBA-15 gave rise to spectroscopic features at approximately 1340, approximately 1420, and approximately 1500 cm-1 assigned to ethylidyne, di-sigma-bonded ethylene, and pi-bonded ethylene, respectively. The ratio of these surface species is highly dependent on the Pt particle size. At room temperature, Pt particles stabilize ethylidyne as well as di-sigma- and pi-bonded ethylene; however, ethylidyne predominated on the surfaces of larger particles. Ethylidyne was the only identifiable species at 403 K, with its formation being more facile on larger particles. Co-adsorption experiments reveal that the composition of the surface layer is dependent on the order of exposure to gases. Exposure of a C2H4-covered Pt surface to CO resulted in an approximately 50% decrease in chemisorbed CO compared to a fresh Pt surface. The nu(CO) appeared at 2050 cm-1 on Pt/SBA-15 pretreated with C2H4 at room temperature. The di-sigma-bonded and pi-bonded species are the most susceptible to displacement from the surface by CO. The formation of ethylidyne appeared to be less sensitive to the presence of adsorbed carbon monoxide, especially on larger particles. Upon exposure of C2H4 to a CO-covered Pt surface, little irreversible uptake occurred due to nearly 100% site blocking. These results demonstrate that carbon monoxide competes directly with ethylene for surface sites, which will have direct implications on the poisoning of the heterogeneously catalyzed conversion of hydrocarbons.     

介孔载体负载Pt催化剂上α-酮酸酯的不对称氢化

以介孔材料SBA-15、经或未经Al2O3修饰的具有三维立方孔道结构的SiO2为载体,制备了负载型Pt催化剂,并用于催化α-酮酸酯底物2-氧代-4-苯基-丁酸乙酯(EOPB)和丙酮酸乙酯(Etpy)的不对称氢化反应中.结果表明,当SBA-15孔径由6.2,7.6和9.2nm依次增加时,EOPB不对称氢化的活性和手性选择...     

以SBA-15为硅源合成多级孔SAPO-11分子筛及其在正十二烷临氢异构化中的应用

以脱除模板剂后的SBA-15为硅源和间接模板剂,在水热条件下制备多级孔SAPO-11分子筛,并通过XRD、SEM、红外光谱、氮气物理吸附-脱附等表征手段对样品的晶相、形貌、酸性和织构性质进行表征。结果表明,以焙烧后的SBA-15为硅源合成出纯相的SAPO-11分子筛,且SBA-15已完全转化。合成的SAPO-11样品呈空心的近方柱体形貌,由宽度为100 nm左右的细条聚集而成,晶粒粒径为1-3 μm。与白炭黑、硅溶胶合成的常规SAPO-11分子筛对比发现,添加SBA-15可在SAPO-11中引入介孔孔道,孔径为5-10 nm,且样品以中强度的Brønsted酸为主,弱Brønsted酸相对较少。以正十二烷为探针分子,考察Pt/SAPO-11催化剂的临氢异构化反应性能。结果表明,多级孔Pt/SAPO-11催化剂具有优良的异构化反应性能。催化剂的高活性和选择性与SAPO-11分子筛的酸性质和孔道结构密切相关,中强度的Brønsted酸量的增加有助于活性提高,同时介孔孔道有利于产物扩散,异构产物的选择性明显提高。     

Particle size dependent adsorption and reaction kinetics on reduced and partially oxidized Pd nanoparticles

Combining scanning tunneling microscopy (STM), IR reflection absorption spectroscopy (IRAS) and molecular beam (MB) techniques, we have investigated particle size effects on a Pd/Fe(3)O(4) model catalyst. We focus on the particle size dependence of (i) CO adsorption, (ii) oxygen adsorption and (iii) Pd nanoparticle oxidation/reduction. The model system, which is based on Pd nanoparticles supported on an ordered Fe(3)O(4) film on Pt(111), is characterized in detail with respect to particle morphology, nucleation, growth and coalescence behavior of the Pd particles. Morphological changes upon stabilization by thermal treatment in oxygen atmosphere are also considered. The size of the Pd particles can be varied roughly between 1 and 100 nm. The growth and morphology of the Pd particles on the Fe(3)O(4)/Pt(111) film were characterized by STM and IRAS of adsorbed CO as a probe molecule. It was found that very small Pd particles on Fe(3)O(4) show a strongly modified adsorption behavior, characterized by atypically weak CO adsorption and a characteristic CO stretching frequency around 2130 cm(-1). This modification is attributed to a strong interaction with the support. Additionally, the kinetics of CO adsorption was studied by sticking coefficient experiments as a function of particle size. For small particles it is shown that the CO adsorption rate is significantly enhanced by the capture zone effect. The absolute size of the capture zone was quantified on the basis of the STM and sticking coefficient data. Finally, oxygen adsorption was studied by means of MB CO titration experiments. Pure chemisorption of oxygen is observed at 400 K, whereas at 500 K partial oxidation of the particles occurs. The oxidation behavior reveals strong kinetic hindrances to oxidation for larger particles, whereas facile oxidation and reduction are observed for smaller particles. For the latter, estimates point to the formation of oxide layers which, on average, are thicker than the surface oxides on corresponding single crystal surfaces.     

Synthesis, characterization and catalytic behavior of functionalized mesoporous SBA-15 with various organo-silanes

Mesoporous silica SBA-15 has been synthesized and functionalized by one-step synthesis method to widen their various application possibilities. In this study, phenyltrimethoxysilane (PTMS), 3-mercaptopropyltrimethoxysilane (MPTMS) and trimethoxypropylsilane (TMPS) were used as silane precursors for the functionalization, and after treated with HCl solution, their catalytic activities were evaluated in the lactic acid-methanol esterification. The presence of anchoring of functional groups on SBA-15 was proved by XRD, FT-IR, BET surface area and pore size distributions. Good catalytic activity was observed especially for SBA-15-SO(3)H-MPTMS, and the catalytic activity order was determined as follows: SBA-15-SO(3)H-MPTMS>SBA-15-TMPS>SBA-15-PTMS, which is directly associated with the surface area, pore size and pore volume. As compared with homogeneous catalyst, SBA-15-SO(3)H-MPTMS heterogeneous catalyst shows remarkable performance, such as separation, recovery and reusability.     

Adsorption energetics of CO on supported Pd nanoparticles as a function of particle size by single crystal microcalorimetry

The heat of adsorption and sticking probability of CO on well-defined Pd nanoparticles were measured as a function of particle size using single crystal adsorption microcalorimetry. Pd particles of different average sizes ranging from 120 to 4900 atoms per particle (or from 1.8 to 8 nm) and Pd(111) were used that were supported on a model in situ grown Fe(3)O(4)/Pt(111) oxide film. To precisely quantify the adsorption energies, the reflectivities of the investigated model surfaces were measured as a function of the thickness of the Fe(3)O(4) oxide layer and the amount of deposited Pd. A substantial decrease of the binding energy of CO was found with decreasing particle size. Initial heat of adsorption obtained on the virtually adsorbate-free surface was observed to be reduced by about 20-40 kJ mol(-1) on the smallest 1.8 nm sized Pd particles as compared to the larger Pd clusters and the extended Pd(111) single crystal surface. This effect is discussed in terms of the size-dependent properties of the Pd nanoparticles. The CO adsorption kinetics indicates a strong enhancement of the adsorbate flux onto the metal particles due to a capture zone effect, which involves trapping of adsorbates on the support and diffusion to metal clusters. The CO adsorption rate was found to be enhanced by a factor of ～8 for the smallest 1.8 nm sized particles and by ～1.4 for the particles of 7-8 nm size.     

SBA-15的孔壁碳膜修饰对钴基催化剂结构与催化性能的影响

在惰性气体中焙烧SBA-15制得孔壁被碳修饰的SBA- 15C样品,以它和SBA-15为载体,采用等量浸渍法制备了负载型Co基催化剂,并运用X射线衍射、N2物理吸附、程序升温还原、NH3吸附量热等手段对样品进行了表征.结果表明,SBA- 15C仍保持原有的六方有序的中孔结构,但其孔壁经碳修饰后发生增厚,比表面积略有下降...     

Mesoporous Silica Microspheres Composited with SBA-15s for Resonance Frequency Reduction in a Miniature Loudspeaker

Microspheres composited with mesoporous SBA-15 particles and silica were investigated as fillers in miniature loudspeakers to study the factors influencing the resonance frequency offsets(RFOs). Mesoporous silica microspheres(MSMs) were prepared by self-assembling SBA-15 mesoporous silica in a microemulsion synthesis system. The formation process involved the fabrication of a stable O/W microemulsion of tetrabutyl orthosilicate(TBOS) and hexadecyltrimethylammonium bromide(C₁₆TAB) and encapsulation of SBA-15s. The RFO increased and then decreased with increasing particle size(in the length range of 0.7-5.5 μm and in the width range of 0.2-0.45 μm), increased with increasing pore size(in the range of 7.0-9.4 nm) of SBA-15s, and increased with decreasing particle size(105-900 μm) of MSMs.     

PtZn-Sn/SBA-15合成、表征及对丙烷催化脱氢性能

以SBA-15为载体,利用浸渍法制备了单、双和三金属Pt催化剂,并对催化剂进行了N2物理吸附(BET)、程序升温还原(H2-TPR)、H2-化学吸附、透射电子显微镜(TEM)和O2-脉冲等技术表征,研究了它们对丙烷催化脱氢(CDH)制丙烯反应的催化性能。研究结果表明,Pt在三金属催化剂中的分散性能最好,并且部分负载组分可以进入SBA-15的孔道,Pt的分散度达到29%,Pt粒子尺寸为3 nm左右。三金属催化剂表现出优越的脱氢性能,这主要归结于载体的弱酸性、活性组分和助剂、载体之间的相互作用及Zn对Pt的电子调控作用。这些因素使催化剂的积炭量较低,因而具有较高的脱氢稳定性和极高的选择性。     

Pt/CeO2/SBA-15催化剂上Pt-CeO2接触界面的相互作用

通过沉积沉淀法(Deposition precipitation, DP)将CeO2纳米粒子高度分散在SBA-15分子筛上, 进一步采用浸渍法负载Pt后制备了 Pt/CeO2/SBA-DP催化剂. 紫外-可见漫反射光谱分析表明, 在Pt/CeO2/SBA-DP催化剂上可以形成更多的Pt-CeO2接触界面, 有利于从CeO2到Pt的电子转移过程. CO程序升温还原(CO-TPR)测试证实, Pt/CeO2/SBA-DP催化剂上CeO2表面氧物种具有较高的还原能力.     

Shape- and size-controlled synthesis in hard templates: sophisticated chemical reduction for mesoporous monocrystalline platinum nanoparticles

Here we report a novel hard-templating strategy for the synthesis of mesoporous monocrystalline Pt nanoparticles (NPs) with uniform shapes and sizes. Mesoporous Pt NPs were successfully prepared through controlled chemical reduction using ascorbic acid by employing 3D bicontinuous mesoporous silica (KIT-6) and 2D mesoporous silica (SBA-15) as a hard template. The particle size could be controlled by changing the reduction time. Interestingly, the Pt replicas prepared from KIT-6 showed polyhedral morphology. The single crystallinity of the Pt fcc structure coherently extended over the whole particle.     

Synthesis and characterization of SBA-3, SBA-15, and SBA-1 nanostructured catalytic materials

A highly ordered large pore mesoporous silica molecular sieve SBA-3, SBA-15, Al-SBA-15, and SBA-1, were developed and characterized by XRD, BET, FTIR, SEM, and NMR-MAS. The catalytic materials were synthesized using different raw materials and operation conditions. These materials contain a regular arrangement of uniform channels with diameters between 1.8 and 10 nm, high specific surface area and high specific pore volume. The designed methods were effective for the synthesis, presenting each mesostructured materials, patterns of XRD and other characteristics corresponding to the reported ones in literature. The new route employed to synthesize Al-SBA-15, generates a catalyst with only aluminum in tetrahedral form, according to the data of (27)Al NMR-MAS. However, several reports indicated that the coordination of the Al atoms changes below the Si/Al ratio of 45, presenting peaks corresponding to penta and hexa-coordinated aluminum, which are absent in our samples (Si/Al = 50 and 33).     

An iron Schiff base complex loaded mesoporous silica nanoreactor as a catalyst for the synthesis of pyrazine-based heterocycles

An iron Schiff base complex was encapsulated in SBA-15 mesoporous silica to afford a Fe(III)-Schiff base/SBA-15 heterogeneous nanocatalyst for the synthesis of pyridopyrazine and quinoxaline heterocycles. These reactions proceeded in water with excellent yields. The catalyst was characterized by physico-chemical and spectroscopic methods and found to retain the characteristic channel structures of the SBA-15, allowing good accessibility of the encapsulated metal complex.     

Ru/SBA-15的制备及其对水煤气变换反应的催化作用

制备了中孔分子筛SBA-15,以SBA-15为载体采用真空浸渍法制备了负载型Ru基水煤气变换反应的催化剂。利用透射电子显微镜、X-射线粉末衍射等方法对样品进行了表征。结果表明,合成的SBA-15分子筛孔径约为8 nm,粒径约为1 nm的Ru纳米粒子均匀分布在分子筛孔道中,添加适量的La2O3助剂可以显著提高催化剂的低温活性。当Ru和La2O3的负载量分别为4%和8%时,R4L8/SBA-15催化剂对CO转化率在255℃和265℃下分别达到56%和98%。     

An exploration of the surfaces of some Pt/SiO2 catalysts using CO as an infrared spectroscopic probe

Infrared spectra in the bond-stretching, ν CO, region have been measured for CO adsorbed on an impregnated Pt/SiO₂ catalyst (16% Pt) with the aim of characterizing the adsorption sites present. This catalyst has previously been widely used for the study of the spectra from adsorbed hydrocarbons. It has relatively large metal particles, typically in the diameter range of 5 to 15 nm. Samples were studied which were hydrogen-covered, hydrogen-depleted, oxygen-covered and “mature”, the latter in the sense that the catalyst had undergone a number of repeated adsorption/desorption/re-reduction cycles. The spectra were interpreted in terms of the adsorption sites available by using recent correlations between ν CO wavenumbers and different patterns of CO metal interactions in metal clusters of structures known from X-ray crystallography.The strongest ν CO absorptions were from linearly adsorbed OCPt species, but these were relatively uninformative (maxima in the region 2087 to 2084 cm⁻¹ in all cases at saturation coverage) because strong dipolar coupling causes intensity-distortion and the merging-together of absorptions from different types of sites. Small proportions of sites, probably of an atomically rough nature from curved areas of the crystallites, gave weaker absorptions near 2050 and 2030 cm⁻¹. On the oxygen-covered surface a sharp absorption at 2099 cm⁻¹ denoted CO adsorption adjacent to sites of adsorbed oxygen.The weaker absorption bands in the ν CO bridged region were more informative. The strongest, near 1850 cm⁻¹ was correlated with 2-fold bridged species adsorbed on (111) surfaces. Weaker, overlapping features near 1880 and 1795 cm⁻¹ (separated from an overall contour with the aid of computer analysis) were correlated, respectively with 2-fold bridged species on (100) or (110) planes, and 3-fold bridged species on (111) planes. Weaker absorptions near 1700 cm⁻¹ were considered to correspond to different types of adsorption sites involving unequal interactions of CO with at least two metal atoms.The “mature” Pt/SiO₂ samples gave notably different spectra in both regions and this was tentatively attributed to the effect of residual carbon atoms on or near the Pt surface.A comparison was made of the present spectra with those previously published from similar experiments on a small-particle (ca 2 nm) Pt/SiO₂ catalyst, EUROPT-1. The spectral differences could be well accounted for in terms of the reported raft-like (111)-based morphology of the small metal particles of the EUROPT-1 catalyst.     

Influence of the pore structure of MCM-41 and SBA-15 silica fibers on atomic layer chemical vapor deposition of cobalt carbonyl

Mesoporous high surface area MCM-41 and SBA-15 type silica materials with fibrous morphology were synthesized and used as support materials for the ALCVD (atomic layer chemical vapor deposition) preparation of Co/MCM-41 and Co/SBA-15 catalysts. Co/MCM-41 and Co/SBA-15 catalysts were prepared by deposition of Co2(CO)8 from the gas phase onto the surfaces of preheated support materials in a fluidized bed reactor. For both silica materials, two different kinds of preparation methods, direct deposition and a pulse deposition method, were used. Pure silica supports as well as supported cobalt catalysts were characterized by various spectroscopic (IR) and analytical (X-ray diffraction, Brunauer-Emmett-Teller, elemental analysis) methods. MCM-41 and SBA-15 fibers showed considerable ability to adsorb Co2(CO)8 from the gas phase. For MCM-41 and SBA-15 silicas, cobalt loadings of 13.7 and 12.1 wt % were obtained using the direct deposition method. The cobalt loadings increased to 23.0 and 20.7 wt % for MCM-41 and SBA-15 silicas, respectively, when the pulse deposition method was used. The reduction behavior of silica-supported cobalt catalysts was found to depend on the catalyst preparation method and on the mesoporous structure of the support material. Almost identical reduction properties of SBA-15-supported catalysts prepared by different deposition methods are explained by the structural properties of the mesoporous support and, in particular, by the chemical structure of the inner surfaces and walls of the mesopores. Pulse O2/H2 chemisorption experiments showed catalytically promising redox properties and surface stability of the prepared MCM-41- and SBA-15-supported cobalt catalysts.     

A rotating disk electrode study of the particle size effects of Pt for the hydrogen oxidation reaction

By using a catalyst-lean thin-film RDE method, the fast kinetics of the hydrogen oxidation reaction (HOR) on highly dispersed Pt nanoparticle electrocatalysts can be determined, free from the interference of the mass transport of H(2) molecules in solution. Measurements with carbon-supported Pt nanoparticles of different sizes thus allow revealing the particle size effect of Pt for the HOR. It is shown that there is a "negative" particle size effect of Pt on the kinetics of HOR, i.e., the exchange current density j(0) decreases with the increased dispersion (i.e. decreased mean particle size). A maximum mass activity of Pt for the HOR is found at particle sizes of 3-3.5 nm. The observed particle size effect is interpreted in terms of the size dependent distribution of surface atoms on the facets and edges, which is implied by the voltammetric responses of Pt/C catalysts with differently sized Pt particles. The accompanied decrease in the HOR activity with the increase in the edge atom fraction suggests that the edge atoms on the surface of Pt nanoparticles are less active for the HOR than those on the facets.     

Mesopore-free hollow silica particles with controllable diameter and shell thickness via additive-free synthesis

Mesopore-free hollow silica particles with a spherical shape, smooth surface, and controllable diameter (from 80 to 300 nm) and shell thickness (from 2 to 25 nm) were successfully prepared using an additive-free synthesis method. Different from other hollow particle developments, a mesopore-free shell was produced because of the absence of additive. Although common reports pointed out the importance of the additional additive in pasting and growing silica on the surface of a template, here we preferred to exploit the effect of the template charge in gaining the silica coating process. To form the silica, basic amino acid (i.e., lysine) was used as a catalyst to replace ammonia or hydrazine, which is harmless and able to control the silica growth and produce hollow particles with smooth surfaces. Control of the particle diameter was drastically achieved by altering the size of the template. The flexibility of the process in controlling the shell thickness was predominantly attained by varying the compositions of the reactants (i.e., silica source and catalyst). The present mesopore-free hollow particles could be efficiently used for various applications, especially for thermal insulator and optical devices because of their tendency not to adsorb large molecules, as confirmed by adsorption analysis.     

Surface properties of Ni-Pt/SiO2 catalysts for N2O decomposition and reduction by H2

The surface properties of bimetallic Ni-Pt/SiO2 catalysts with variable Ni/Ni + Pt atomic ratio (0.75, 0.50, and 0.25) were studied using N2O decomposition and N2O reduction by hydrogen reactions as probes. Catalysts were prepared by incipient wetness impregnation of the silica support with aqueous solutions of the metal precursors to a total metal loading of 2 wt %. For both model reactions, Pt/SiO2 catalyst was substantially more active than Ni/SiO2 catalyst. Mean particle size by TEM was about the same (in the range 6-8 nm) for all catalysts and truly bimetallic particles (more than 95%) were evidenced by EDS in the Ni-Pt/SiO2 catalysts. CO adsorption on the bimetallic catalysts showed differences in the linear CO absorption band as a function of the Ni/Pt atomic ratio. Bimetallic Ni-Pt/SiO2 catalysts showed, for the N2O decomposition, a catalytic behavior that points out an ensemble-size sensitive behavior for Ni-rich compositions. For the N2O + H2 reaction, the bimetallic catalysts were very active at low temperature. The following activity order at 300 K was observed: Ni75Pt25 > Ni25Pt75 approximately Ni50Pt50 > Pt. TOF values for these catalysts increased 2-5 times compared to the most active reference catalyst (Pt/SiO2). The enhancement of the activity in the Ni75Pt25 bimetallic catalysts is explained in terms of the presence of mixed Ni-Pt ensembles.