Growth of Gemini Surfactant Micelles Under the Influence of Additives: DLS Studies

Results are presented on the first extensive study on the influence of additives on the growth of gemini; alkanediyl α, ω - bis(dimethylcetylammonium bromide) surfactant micelles (16-s-16, with s = 5, 6); as measured by dynamic light scattering technique at 30°C. The effect of adding n-butanol, n-pentanol, n-hexanol, and n-hexylamine in the absence or presence of general ionic salt potassium bromide on 0.03 M gemini solutions were observed. The tendency for micelles to grow from spherical to rodlike structures is decisively influenced by the spacer length s. At 30°C, the micellar growth was more for s being 5, which has been interpreted in terms of short spacer having strong propensity for micellar growth. Addition of KBr plays a role in screening of the electrostatic interactions, thus promoting a change of morphology of the aggregates and giving rise to high hydrodynamic diameter (D _h ) values. The micellar growth in presence of alcohols is interpreted in terms of the formation of the gemini–alcohol mixed micelles which followed the pattern C₆OH>C₅OH>C₄OH. For equal chain length additives C₆OH and C₆NH₂, the growth was more pronounced in case of alcohol. Also, in case of C₆NH₂, the value of D _h reached to almost constancy or decreased to some extent, which is discussed in terms of its partitioning in aqueous phase. A combined presence of KBr and n-alcohols or n-hexylamine produced favorable conditions for micellar growth due to synergistic effect.     

Study of the Interaction Between Promazine Hydrochloride and Surfactant (Conventional/Gemini) Mixtures at Different Temperatures

In the present paper, the micellization of an amphiphilic drug, promazine hydrochloride, and gemini surfactants (16-s-16) with s = 4–6 and the monomeric hexadecyltrimethylammonium bromide (CTAB) counterparts has been examined conductometrically in the pure and mixed states in aqueous solutions at different compositions and temperatures (298.15–308.15 K). Dicationic gemini surfactants provide much better environment for the micellization behavior than the corresponding monocationic counterpart CTAB. The critical micelle concentration (cmc) values are lower than the cmc for ideal mixing, cmc ^id, suggesting attractive interactions between the two components in mixed micelles. The micellar mole fractions of surfactants, evaluated by different models, show greater contributions of surfactants in mixed micelles and increase with increasing concentrations of these surfactants. The negative values of β suggest synergism in the mixtures, which is highly beneficial as it reduces the total amount of surfactants required in a particular application, leading to reductions of cost and environmental impact. Activity coefficients (f ₁ and f ₂) are always less than unity showing nonideality in the systems. The data have been also used for evaluation of thermodynamic parameters.     

Effect of (chloride salt) electrolytes on the mixed micellization of (equimolar) a cationic gemini (dimeric) surfactant and a cationic conventional (monomeric) surfactant

Herein we report the effect of (chloride salt) electrolytes on the mixed micellization of (equimolar) a cationic gemini (dimeric) surfactant, hexanediyl-1,6-bis(dimethylcetylammonium bromide) (16-6-16), and a cationic conventional (monomeric) surfactant, cetyltrimethylammonium bromide (CTAB) in aqueous solutions. In absence and presence of (chloride salt) MCl (where M?Li, Na, and K) electrolytes, the critical micelle concentration (CMC) of mixed (16-6-16 + CTAB) surfactants was measured by surface tension measurements. With increasing the concentration of electrolyte, the CMCs were increasing. The surface properties and the thermodynamic parameters of the mixed micellar systems were also evaluated. From these evaluated thermodynamic parameters, it was found that in presence of electrolyte the stability of the mixed micellar system is more.     

Aggregation and clouding behavior of aqueous solution of EO-PO block copolymer in presence of n-alkanols

The aqueous solution behavior of an ethylene oxide-propylene oxide triblock copolymer Pluronic^® P123 [(EO)₂₀(PO)₇₀(EO)₂₀] was investigated in the presence of various n-alkanols (C₁-C₆) by cloud-point, viscosity, dynamic light scattering (DLS) and spectroscopic (FTIR, NMR) measurements. For lower alkanols (methanol, ethanol and 1-propanol), the cloud-points (CPs) increased with increase in alkanol concentration. The reverse effect was found for higher alkanols (C₄-C₆) where both the CPs and critical micelle temperatures (CMTs) decreased with increase in concentration. This behavior is explained in terms of a co-operative association of higher alkanols and block copolymers by replacing water molecules in the PPO core and inducing micellar growth in aqueous P123 solution. Lower alkanols are likely to be good solvents for both PEO and PPO blocks and the effect on PPO blocks predominates indicating an increase in CP and CMT with increase in alkanol concentration.     

Micellization and mixed micellization of cationic gemini (dimeric) surfactants and cationic conventional (monomeric) surfactants: Conductometric,dye solubilization,and surface tension studies

In the present study, we have investigated the self-association, mixed micellization, and thermodynamic studies of a cationic gemini (dimeric) surfactant, hexanediyl-1,6-bis(dimethylcetylammonium bromide (16-6-16)) and a cationic conventional (monomeric) surfactant, cetyltrimethylammonium bromide (CTAB). The critical micelle concentration (CMC) of pure (16-6-16 and CTAB) and mixed (16-6-16+CTAB) surfactants was measured by electrical conductivity, dye solubilization, and surface tension measurements. The surface properties (viz., C₂₀ (the surfactant concentration required to reduce the surface tension by 20 mN/m), Π_CMC (the surface pressure at the CMC), Γ_max (maximum surface excess concentration at the air/water interface), A_min (the minimum area per surfactant molecule at the air/water interface), etc.) of micellar (16-6-16 or CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were evaluated. The thermodynamic parameters of the micellar (16-6-16 and CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were also evaluated.     

Interaction of the Amphiphilic Drug Amitriptyline Hydrochloride with Gemini and Conventional Surfactants: A Physicochemical Approach

Pyrene fluorescence measurements were carried out on various binary mixtures of the antidepressant amphiphilic drug amitriptyline hydrochloride (AMT) with conventional (TTAB and CTAB) and gemini surfactants (14-4-14 and 16-4-16). In all cases mixed micellar aggregates were formed and the mixed critical micelle concentration (cmc) of various mixtures was computed from the I ₁/I ₃ versus total surfactant concentration plots. In the region where mixed micelles are formed, the interaction of the amphiphlic drug and four surfactants showed synergistic behavior. The results were analyzed using an interaction parameter, β, which characterize the interaction in the mixed micelle and is introduced by a regular solution theory. The β values are negative in all binary mixtures, and their magnitudes increase with increasing hydrophobicity of the amphiphile. The micellar mole fraction of AMT in the mixed micelle (x ₁) and in the ideal sate (x _ideal) were evaluated and their values (x ₁ > x _ideal) suggest that the contribution of the AMT component is greater in binary mixtures as compared to that in the ideal state. Activity coefficients (f ₁ and f ₂) and excess Gibbs energy (G _ex) were also calculated. The values of micelle aggregation numbers (N _agg) and various other parameters like the Stern–Volmer constant (K _sv), micropolarity and dielectric constant of mixed systems have also been evaluated from the ratios of respective peak intensities (I ₁/I ₃ or I ₀/I ₁).     

Wormlike Micelle Formation and Rheological Behavior in the Aqueous Solutions of Mixed Sulfate Gemini Surfactant without Spacer Group and Dodecyltrimethylammonium Bromide

The rheological behavior of the aqueous solutions of mixed sulfate gemini surfactant with no spacer group, referred to as d‐C₁₂S, and dodecyltrimethylammonium bromide (C₁₂TABr) at a total concentration of 100 mmol·L⁻¹ but different molar ratios of C₁₂TABr to d‐C₁₂S (α₁) was investigated using steady rate and frequency sweep measurements. The wormlike micelles were formed over a narrow α₁ range of 0.20–0.27. The viscoelastic solutions exhibited Maxwell fluid behavior. At the optimum molar ratio of 0.25, the zero‐shear viscosity was as high as 600 Pa·s and the length of the mixed wormlike micelle was about 0.45–0.85 µm. The present result provides an example to construct long wormlike micelles by anionic gemini surfactant.     

Adsorption of oppositely charged polyelectrolyte/gemini surfactant mixtures at the air/water interface and the effects of NaBr: a surface tension study

The adsorption of mixed solutions containing an anionic polyelectrolyte, carboxymethylchitosan (CMCH), and cationic gemini surfactants, alkanediyl-bis-(dimethyldodecyl-ammonium bromide) (C₁₂-s-C₁₂, s?=?2, 6, 12), has been investigated by surface tension method. The oppositely charged polyelectrolyte and the surfactants co-adsorb at the surface to form highly surface-active complexes. Combining the surface tension data with the Gibbs equation, it is referred that the surface layers of the mixed solutions have the multi-level structure, which includes the sublayers beneath an outermost layer. The gemini surfactant spacer with different length takes different conformations in the surface layers. The salt (NaBr) effects on the adsorption of the mixtures have also been studied. The spacer length of C₁₂-s-C₁₂ influences the responses of CMCH/C₁₂-s-C₁₂ mixtures to the salt effects. The comprehensive salt effects depend on the competition between the salt-enhancing effect and the salt-weakening effect.     

Adsorption and Micellization Behavior of Cationic Surfactants (Gemini and Conventional)—Amphiphilic Drug Systems

In the present work, the behavior of mixed drug–surfactant systems has been studied by surface tension measurements. The drug used in this work is adiphenine hydrochloride (ADP) and the surfactants are of m-s-m type geminis, i.e., alkanediyl-α,ω-bis(dimethylalkylammonium bromide), with m = (14, 16), s = (4, 5, 6), and conventional alkyltrimethylammonium bromides (CTAB, TTAB). The excess surface concentration (Γ _max ) increases and the minimum head group area at the air/water interface (A _min) decreases with increasing concentration of surfactant in the drug solution. Both the critical micelle concentration (cmc) and ideal cmc (cmc*) values decrease with mole fraction of surfactants. Also, the cmc values are lower than cmc*, indicating attractive interactions are present in the mixed micelles. The mole fractions of surfactant in the micelles $ \left( {X_{1}^{m} } \right) $ and monolayers $ \left( {X_{1}^{\sigma } } \right) $ , as well as the respective interaction parameters ( $ \beta^{m} $ , $ \beta^{\sigma } $ ), indicate that monolayer formation is easier than micelle formation due to the rigid hydrophobic part of the drug.     

Synthesis and Surface Properties of Novel Cationic Gemini Surfactants

A series of novel cationic gemini surfactants, p-[C _n H_2n+1N⁺(CH₃)₂CH₂CH(OH)CH₂O]₂C₆H₄·2Cl^? [A(n = 12), B(n = 14) and C(n = 16)], containing a spacer group with two flexible and hydrophilic groups (2-hydroxy-1,3-propylene) on both sides of a rigid and hydrophobic group (1,4-dioxyphenylene) has been synthesized by the reaction of hydroquinone diglycidyl ether with N,N-dimethylalkylamine and N,N-dimethylalkylamine hydrochloride. Their surface-active properties have been investigated by surface tension measurement. The critical micelle concentration (cmc) values of the synthesized cationic gemini surfactants are one order of magnitude lower than those of their corresponding monomeric surfactants (C _n H_2n + 1N⁺(CH₃)₃·Cl^?). Both the cmc and surface tension at the cmc (γ_cmc) of A are lower than those of p-[C₁₂H₂₅N⁺(CH₃)₂CH₂]₂C₆H₄·2Cl^? (D). The novel cationic gemini surfactants A and B also show good foaming properties.     

Micellar Aggregation Behavior and Electrochemically Reversible Solubilization of a Redox-Active Nonionic Surfactant

For the purpose of studying the potential of a novel nonionic switchable surfactant, 11-ferrocenylundecyl polyoxyethylene ether (FPEG), applied to surfactant-enhanced remediation (SER), the surface properties and micelle solubilization behavior of FPEG were investigated with different inorganic salts. With the addition of inorganic salts (NaCl and CaCl₂), the critical micelle concentration (CMC) of FPEG dropped from 15 to 12 and 8 mg·L^?1, respectively, due to the salting-out effect on the alkyl chain. Thermodynamic parameters based on the CMCs indicated that micelle formation was an entropy-driven process. Dynamic light scattering measurements verified that these inorganic salts can decrease the hydrodynamic diameters (D _h) of the micelles. Solubilization experiments with three typical polycyclic aromatic hydrocarbons (PAHs) demonstrated that the system of FPEG with NaCl shows the highest solubilization ability, and the molar solubilization ratio and micelle–water partition coefficient (K _m ) values follow the order pyrene > phenanthrene > acenaphthene. After oxidation, PAHs can be released from the micelles through breaking up of the micelles, and the cumulative release efficiency of pyrene, phenanthrene and acenaphthene are 31.2, 42.8 and 44.6 %; the order of release efficiency is opposite to that of the reduced form for solubilization abilities. All the results suggest that the ferrocene-containing, redox-active surfactant FPEG has the potential to be recycled in SER technology through electrochemistry approaches.     

Thiol‐responsive micelles based on nonionic gemini surfactants with a cystine disulfide spacer

Thiol‐responsive micelles consisting of novel nonionic gemini surfactants with a cystine disulfide spacer are reported. The gemini surfactants, (C₁₈‐Cys‐mPEG)₂ and ((C₁₈)₂‐Lys‐Cys‐mPEG)₂, were synthesized from polyethylene glycol, cysteine, and stearic acid, and their structures were confirmed by ¹H NMR and gel permeation chromatography. (C₁₈‐Cys‐mPEG)₂ and ((C₁₈)₂‐Lys‐Cys‐mPEG)₂ formed micelles with average diameters of 13 and 22 nm above the critical micelle concentration of 6.5 and 4.7 µg mL^?1, respectively. The micelles of ((C₁₈)₂‐Lys‐Cys‐mPEG)₂ containing more stearoyl groups showed encapsulated more hydrophobic indomethacin (IMC) with higher entrapment efficiencies than those of (C₁₈‐Cys‐mPEG)₂. The gemini surfactant micelles exhibited an accelerated release of encapsulated IMC with the concentration of the reducing agent, glutathione (GSH), whereas they were unaffected by the presence of reduced GSH (GSSG). The 3‐(4,5‐dimethylthiazol‐2‐yl)‐5‐(3‐carboxymethoxyphenyl)?2‐(4‐sulfophenyl)?2H‐tetrazolium studies revealed the noncytotoxic nature of the gemini surfactant micelles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 582–589     

Structural transition of bifunctional surfactants

Abstract  The effect of primary alcohols (butanol to hexanol) and n-hexylamine on the micellar properties of solutions of alkanediyl-α,ω-bis(dimethylcetylammonium bromide) (16-s-16, with s = 5, 6) in the absence and presence of KBr was investigated by viscometric studies at 30 ± 0.1°C. The viscosities were determined using an Ubbelohde viscometer. The viscosity values exhibit the order s = 5 > 6, i.e., the gemini with short spacer produces the more viscous solution with hexanol > pentanol > butanol. The high viscosities observed in these systems are interpreted in terms of a micellar sphere to rod transition that takes place over a certain range of concentration of the surfactants with added salt or organic additives or both. Micellar growth was higher in case of C₆H₁₃OH when compared to C₆H₁₃NH₂. In the presence of C₆H₁₃NH₂, the relative viscosity becomes almost constant when the concentration of the additive is increased, which has also been discussed in terms of electrostatic and hydrophobic forces operating in the solution. The positive synergistic effects of additives also confirm pronounced micellar growth. Graphical abstract        

Effects of Inorganic Salts on Micellization and Solubilization in an Aqueous Solution of Poly(ethylene oxide)/Poly(propylene oxide)/Poly(ethylene oxide) Triblock Copolymer

The effects of inorganic salts on micellization and solubilization of prednisolone in aqueous solution of poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) triblock copolymer (Pluronic P85) were studied. The effect of inorganic salts on decrease in the cloud point and the critical micelle concentration (cmc) of Pluronic P85 was the order of Na₂HPO₄ > NaH₂PO₄ > NaCl > NaBr. Moreover, it was found that Pluronic P85 forms two kinds of micelles: monomolecular micelles and polymolecular micelles. The polymolecular micelle increased with increasing amount of added inorganic salts. Moreover, solubilization behavior is explained from the standpoint of salting out for prednisolone and association characteristics of Pluronic P85.     

Morphological Changes of Cationic Gemini Surfactants 14-s-14 (s=4,5,6) in the Presence of Additives

The effect of adding aliphatic alcohols (C₄OH, C₅OH, C₆OH) and corresponding amines (C₄NH₂, C₅NH₂, C₆NH₂) on a series of dicationic gemini surfactants with the general formula C₁₄H₂₉(CH₃)₂N⁺?C(CH₂)_s?CN⁺(CH₃)₂C₁₄H₂₉, 2Br^? (14-s-14; s=4,5,6), in the absence and presence of KNO₃, has been studied by viscosity measurements at 303.15?K. As the chain length of the additive increased, the viscosity increased with increasing additive concentration and the extent of the effect followed the sequence: C₆OH>C₅OH>C₄OH; C₆NH₂>C₅NH₂>C₄NH₂. The simultaneous presence of salt and additives showed an increase in ?? _r values due to a synergistic effect. However, for equal chain lengths in the additives, the effect was greater for the n-alcohols. The tendency for the micelles to grow from spherical to rod-like structures is mainly influenced by the spacer chain length. At 303.15?K, the micellar growth was more pronounced for the shorter spacer, i.e. s being 4, which can be interpreted in terms of the short spacer having a higher tendency for micellar growth. Contrary to the cationic geminis, no effect was observed with a conventional surfactant of equal chain length, TTAB, even in the presence of KNO₃ at the same concentration used for the geminis.     

Micellization and Thermodynamic Parameters of Butanediyl-1,4-bis(tetradecyldimethylammonium Bromide) Gemini Surfactant at Different Temperatures: Effect of the Addition of 2-Methoxyethanol

The effect of the addition of 2-methoxyethanol on the critical micelle concentration (cmc) and on the degree of counterion dissociation (??) of butanediyl-1,4-bis(tetradecyldimethylammonium bromide) gemini surfactant, [C₁₄H₂₉N⁺(CH₃)₂?C(CH₂)₄?CN⁺(CH₃)₂C₁₄H₂₉,2Br^?] (referred as 14?C4?C14,2Br^?), has been studied by varying the compositions of the 2-methoxyethanol + water mixed solvent media (0 to 50?%). To determine various thermodynamic parameters of micellization, on the basis of the mass?Caction model for micelle formation, the experiments were performed at selected compositions of the mixed solvent at four temperatures ranging between 25?°C and 50?°C. Furthermore, the air/bulk surface tensions of the pure and mixed media were determined, and a successful attempt was made to correlate the cohesive energy density described through the Gordon parameter with the values of Gibbs energy of micellization.     

Interaction of Novel Anionic Gemini Surfactants with Dodecyl Sodium Sulfate in Aqueous NaCl Medium and the Performance of Their Mixtures

The interaction in two mixtures of two novel anionic gemini surfactants, sodium 2,2′-(6,6′-(ethane-1,2-diylbis(azanediyl)bis(4-(hexylamino)-1,3,5-triazine-6,2-diyl)bis(azanediyl)diethanesulfonate (C₆-2-C₆) and sodium 2,2′-(6,6′-(ethane-1,2-diylbis(azanediyl)bis(4-(octylamino)-1,3,5-triazine-6,2-diyl) bis(azanediyl) diethanesulfonate (C₈-2-C₈), and conventional anionic surfactants, sodium dodecyl sulfate (SDS), have been investigated in 0.1 M NaCl aqueous solutions. The mixed systems are C₆-2-C₆/SDS and C₈-2-C₈/SDS, and the mole factions (α_G) of geminis are 0.1, 0.3, 0.5, 0.7, and 0.9, respectively. Mixtures of both C₆-2-C₆/SDS and C₈-2-C₈/SDS exhibit synergism in surface tension reduction efficiency and mixed micelle formation. But, all mixtures except C₆-2-C₆/SDS (α_G = 0.7), C₆-2-C₆/SDS (α_G = 0.9), and C₈-2-C₈/SDS (α_G = 0.1) don't exhibit synergism in surface tension reduction effectiveness. The performances, such as wetting, emulsification, and dispersion were measured and the results showed all mixtures posses application properties.