Contact printing of arrayed microstructures

A novel contact printing method utilizing a sacrificial layer of polyacrylic acid (PAA) was developed to selectively modify the upper surfaces of arrayed microstructures. The method was characterized by printing polystyrene onto SU-8 microstructures to create an improved substrate for a cell-based microarray platform. Experiments measuring cell growth on SU-8 arrays modified with polystyrene and fibronectin demonstrated improved growth of NIH 3T3 (93% vs. 38%), HeLa (97% vs. 77%), and HT1080 (76% vs. 20%) cells relative to that for the previously used coating method. In addition, use of the PAA sacrificial layer permitted the printing of functionalized polystyrene, carboxylate polystyrene nanospheres, and silica nanospheres onto the arrays in a facile manner. Finally, a high concentration of extracellular matrix materials (ECM), such as collagen (5 mg/mL) and gelatin (0.1%), was contact-printed onto the array structures using as little as 5 μL of the ECM reagent and without the formation of a continuous film bridge across the microstructures. Murine embryonic stem cells cultured on arrays printed with this gelatin hydrogel remained in an undifferentiated state indicating an adequate surface gelatin layer to maintain these cells over time.     

Effect of α-Ketoglutarate on Monoclonal Antibody Production of Hybridoma Cell Lines in Serum-Free and Serum-Containing Medium

Process development and optimization for increase population growth and protein productivity in mammalian cell culture have been studied for many years. In this study, the behavior of hybridoma cells was investigated using six-well micro-titer plate systems with a working volume of 4 ml. Mouse hybridoma cell lines D2 and 2C83G2 were seeded in serum-free and serum-containing media and cultured for 8 days. alpha-Ketoglutarate is an integral component of the tricarboxylic acid (TCA) cycle and is produced from glutamine via glutamate. To study its effect on cell growth, metabolism, and monoclonal antibody (mAb) production, 2 mM alpha-ketoglutarate (pH 7.2) was added in both media at the beginning of the cultivation and in another set after 72 h. High cell density was observed in D2 cell culturing in serum-free medium, while 2C83G2 cell line showed high cell density in serum-containing medium. However, both cell lines cultured in serum-free medium gave viability above 70% when grown for 8 days. The supplement of 2 mM alpha-ketoglutarate supported cell growth and mAb production of both hybridoma cell lines in serum-free and serum-containing medium. The addition of alpha-ketoglutarate at the beginning of the batch cultivation gave better result in cell growth and mAb production as compared to alpha-ketoglutarate supplementation after 72 h. However, addition after 72 h was better than no addition at all. This indicates that alpha-ketoglutarate have a positive effect on production and release of antibody.     

Buildup of polyelectrolyte-protein multilayer assemblies on gold electrodes. Role of the hydrophobic effect

The buildup of layer-by-layer assemblies onto gold surfaces from water-soluble charged polyelectrolytes and proteins is examined using quartz crystal microgravimetry (QCM) and electrochemical techniques. Polyelectrolytes such as poly(styrenesulfonate) and poly(ester sulfonic acid) (Eastman AQ-29D polymer) adsorb spontaneously onto gold, contrary to poly(ethyleneimine). From the modification of the gold surface with a thiol and specific adsorption of polymers under polarization conditions, it is concluded that the hydrophobicity of the gold surface seems to be a determining factor in the adsorption process. Alternate adsorption onto gold resonators first coated with AQ-29D polymer gives stable multilayer films in the case of positively charged lysozyme (pI = 11) or polyheme Desulfovibrio vulgaris Hildenborough cytochrome c3 (pI = 10.5). QCM frequency changes with the number of adsorption steps suggest that a linear increase in film mass occurs. Desulfomicrobium norvegicum polyheme cytochrome c3 (pI = 7), which has a null global charge at neutral pH, is shown to give also stable multilayer AQ-29D/cytochrome c3 films, suggesting that several types of interactions, especially the hydrophobic effect, are involved in the buildup process.     

The influence of polyelectrolyte charges of polyurethane membrane surface on the growth of human endothelial cells

A novel technique to introduce free amino groups onto polyester scaffolds via aminolyzing the ester groups with diamine has been developed recently. The introduction of the free amino groups on these polyester surfaces provides us the possibility to modify polymer surface in a simpler manner, e.g. layer-by-layer assembly of charged species. By this technique, many negatively and positively charged biopolymers were deposited alternatively on polyurethane surface. The deposition process was monitored by fluorescence spectroscopy and advancing contact angle measurements. The result of human endothelial cells cultured in vitro showed that cells on negatively charged surface could not spread and flatten well due to the electrostatic repulsion. The lower attachment ratio induced the lower proliferation ratio. However, after the surface charge was inversed by collagen, both attachment and proliferation ratios increased to different extent. Observed under SEM, cells also presented a flat and spreading morphology.     

Adsorption of bacteria and polycations on model surfaces of cellulose, hemicellulose and wood extractives studied by QCM-D

Quartz crystal microbalance with dissipation monitoring (QCM-D), atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM) were used as the tools to study the adsorption of bacteria onto surfaces of silica and polystyrene coated with materials related to papermaking. Cationic polyelectrolytes used as fixatives and retention aids in paper industry were found to promote irreversible adsorption of the ubiquitous white water bacterium, Pseudoxanthomonas taiwanensis, onto model surfaces of cellulose (pH 8). The high charged low molecular weight polyelectrolyte, poly(diallyldimethyl) ammonium chloride (pDADMAC) adsorbed to silica surface as a flat and rigid layer, whereas the low charged cationic polyacryl amide (C-PAM) of high molecular weight adsorbed as a thick and loose layer. AFM images showed that the polyelectrolytes accumulated as layers around each bacterial cell. In the presence of wood hemicellulose (O-acetyl-galactoglucomannan) the bacteria adsorbed massively, as large, tightly packed rafts (up to 0.05mm in size) onto the polystyrene crystal surface coated with wood extractives (pH 4.7). AFM and FESEM micrographs also showed large naked areas (with no bacteria) in between the bacterial rafts on the crystal surface. In this case, QCM-D only incompletely responded to the massiveness of the bacterial adsorption. The results indicate that cationic polymers can be used to increase the retention of bacteria from the process water onto the fibre web and that, depending on the balance between hemicelluloses and wood extractives and pH of the process waters, bacteria can be drawn from process waters onto surfaces.     

The surface energy of various biomaterials coated with adhesion molecules used in cell culture

This study calculates the surface energy of polystyrene tissue culture plastic, silicon, silicon dioxide and indium tin oxide, all of which have applications in tissue culture. The adhesion molecules: collagen, fibronectin, poly-L-ornithine and poly-D-lysine, were coated onto these various surfaces, and the surface energy of the coated substrates calculated. Coating with fibronectin was found to produce a monopolar acidic surface while poly-D-lysine, poly-L-ornithine and collagen coatings were found to produce monopolar basic surfaces. The calculated surface energy components of the coated materials were then used to give a quantitative determination of the magnitude of their hydrophobicity. It was concluded that collagen, polylysine and polyornithine could provide a hydrophobic or hydrophilic surface depending on the underlying substrates they were coated on. The measurement obtained for fibronectin, unlike the other adhesion molecules, was independent of the underlying surface and remained hydrophobic on all substrates tested. Wetting experiments were carried out on the coated substrates, using the tissue culture medium Dulbeccos modified eagles medium, both containing and not containing serum proteins, and saline solution. These liquids that are commonly used in tissue culture, were then used to provide information how these liquids behave on various substrates coated with the adhesion molecules. Results show that fibronectin coated surfaces represent the most phobic surface for all three liquids. The findings of this study can be used in cell manipulation studies and provide a valuable data set for the biomedical and research industries.     

光固定EGF对CHO-K1细胞生长的促进

用活化的4-叠氮苯甲酸与上皮细胞生长因子EGF反应,合成了具有光反应性的EGF。将这种EGF涂覆在组织培养聚苯乙烯基板上,通过紫外光照射,EGF与聚苯乙烯基板通过共价键连接。在此材料上进行中国仓鼠卵巢细胞CHO－K1的无血清培养,并对细胞生长活性进行研究。     

Influence of biological media on the structure and behavior of ferrocene-containing cationic lipid/DNA complexes used for DNA delivery

Biological media affect the physicochemical properties of cationic lipid-DNA complexes (lipoplexes) and can influence their ability to transfect cells. To develop new lipids for efficient DNA delivery, the influence of serum-containing media on the structures and properties of the resulting lipoplexes must be understood. To date, however, a clear and general picture of how serum-containing media influences the structures of lipoplexes has not been established. Some studies suggest that serum can disintegrate lipoplexes formed using certain types of cationic lipids, resulting in the inhibition of transfection. Other studies have demonstrated that lipoplexes formulated from other lipids are stable in the presence of serum and are able to transfect cells efficiently. In this article, we describe the influence of serum-containing media on lipoplexes formed using the redox-active cationic lipid bis(n-ferrocenylundecyl)dimethylammonium bromide (BFDMA). This lipoplex system promotes markedly decreased levels of transgene expression in COS-7 cells as serum concentrations are increased from 0 to 2, 5, 10, and 50% (v/v). To understand the cause of this decrease in transfection efficiency, we used cryogenic transmission electron microscopy (cryo-TEM) and measurements of zeta potential to characterize lipoplexes in cell culture media supplemented with 0, 2, 5, 10, and 50% serum. Cryo-TEM revealed that in serum-free media BFDMA lipoplexes form onionlike, multilamellar nanostructures. However, the presence of serum in the media caused disassociation of the intact multilamellar lipoplexes. At low serum concentrations (2 and 5%), DNA threads appeared to separate from the complex, leaving the nanostructure of the lipoplexes disrupted. At higher serum concentration (10%), disassociation increased and bundles of multilamellae were discharged from the main multilamellar complex. In contrast, lipoplexes characterized in serum-free aqueous salt (Li(2)SO(4)) medium and in OptiMEM cell culture medium (no serum) did not exhibit significant structural changes. The zeta potentials of lipoplexes in serum-free media (salt medium and cell culture medium) were similar (e.g., approximately -35 mV). Interestingly, the presence of serum caused the zeta potentials to become less negative (about -20 mV in OptiMEM and -10 mV in Li(2)SO(4)), even though serum contains negatively charged entities that have been demonstrated to lead to more negative zeta potentials in other lipoplex systems. The combined measurements of zeta potential and cryo-TEM are consistent with the proposition that DNA threads separate from the lipoplex in the presence of serum, resulting in a decrease in the net negative charge of the surface of the lipoplex.     

Layer-by-layer assembly of thiol-capped au nanoparticles on a water surface and their deposition on H-terminated Si(001) by the Langmuir-Blodgett method

A monolayer of dodecanethiol-encapsulated Au nanoparticles when compressed laterally transforms into layer-by-layer assemblies on water surface. These layer-by-layer assemblies of Au nanoparticles have been deposited on H-terminated Si(001) substrates by using one down-up cycle (two strokes) in the Langmuir-Blodgett (LB) method. The transformation from monolayer to layer-by-layer assembly on a water surface is irreversible; i.e., if the compressed film is decompressed the layer-by-layer structure cannot regenerate the monolayer structure. Unlike layer-by-layer growth, only odd numbers of layers grow from the monolayer on the H-terminated Si(001) substrates by using different numbers of down-up cycles. Z-type LB deposition occurs only in the first down-up cycle of the hydrophobic substrate, whereas Y-type LB deposition takes place in the successive cycles. Such layer-by-layer assemblies of Au nanoparticles, which are made on bare silicon surfaces and where thickness can be controlled at the nanoscale level, are very promising for their novel applications in the field of nanoscience.     

A Novel Magneto-fluorescent Nano-bioprobe for Cancer Cell Targeting,Imaging and Collection

Silica-coated magnetic polystyrene nanospheres (MPN) containing CdTe/CdS quantum dots (QDs) and Fe₃O₄ nanoparticles were prepared, and novel anti-EGFR antibodies were conjugated onto these magneto-fluorescent nanocomposites (MPN–QDs–SiO₂) for cancer cell targeting, imaging and collection. Transmission electron microscopy (TEM), scanning electron microscopy (SEM) images and energy-dispersive x-ray spectrometry (EDS) data showed that the MPN had been successfully coated with QDs and a silica shell, and the nanocomposites obtained with negative charged surfaces were well dispersed. The bioconjugates could be used for specifically labeling and separating cancer cells (MDA-MB-435S, SMMC-7721), but did not recognize and separate the K562 cells because the human epidermal growth factor receptor (EGFR) was not expressed on the surface. Because the anti-EGFR antibody, which we have developed, could specifically recognize certain cancer cells that highly expressed EGFR on their surface, these nanoscale bioconjugates, synchronously exhibiting fluorescence and magnetism, may be used in novel bioprobes for labeling and collecting rare cancer cells, which may be beneficial for early cancer diagnosis.     

Preferential adsorption of bovine serum albumin dimer onto polymer microspheres having a heterogeneous surface consisting of hydrophobic and hydrophilic parts

The adsorption behaviors of bovine serum albumin (BSA) containing both dimeric and monomeric species onto polymer microspheres were examined using various homopolymers and poly(2-hydroxyethyl methacrylate)/polystyrene composite microspheres which were produced by the emulsifier-free (seeded) emulsion polymerization technique. The preferential adsorption of the BSA dimer was clearly observed in an optimum region of the surface hydrophilicities of the polymer microspheres. The preferential adsorption of the BSA dimer onto the composite polymer microspheres having heterogeneous surfaces consisting of hydrophilic and hydrophobic parts was more marked than those onto the homopolymer and copolymer microspheres having homogeneous surfaces.     

Patterned co-culture of primary hepatocytes and fibroblasts using polyelectrolyte multilayer templates

This paper describes the formation of patterned cell co-cultures using the layer-by-layer deposition of synthetic ionic polymers and without the aid of adhesive proteins/ligands such as collagen or fibronectin. In this study, we used synthetic polymers, namely poly(diallyldimethylammonium chloride) (PDAC) and sulfonated polystyrene (SPS) as the polycation and polyanion, respectively, to build the multilayer films. We formed SPS patterns on polyelectrolyte multilayer (PEM) surfaces either by microcontact printing PDAC onto SPS surfaces or vice-versa. To create patterned co-cultures on PEMs, we capitalize on the preferential attachment and spreading of primary hepatocytes on SPS as opposed to PDAC surfaces. In contrast, fibroblasts readily attached to both PDAC and SPS surfaces, and as a result, we were able to obtain patterned co-cultures of fibroblast and primary hepatocytes on synthetic PEM surfaces. We characterized the morphology and hepatic-specific functions of the patterned cell co-cultures with microscopy and biochemical assays. Our results suggest an alternative approach to fabricating controlled co-cultures with specified cell-cell and cell-surface interactions; this approach provides flexibility in designing cell-specific surfaces for tissue engineering applications.     

Influence of nanobubbles on the adsorption of nanoparticles

A quartz crystal microbalance was used to study the influence of nanobubbles on the adsorption of polystyrene nanoparticles onto surfaces coated with gold, or coated with dodecanethiol or mercaptoundecanoic acid self-assembled monolayers (SAMs). Adsorption of the nanoparticles onto the surface causes the resonant frequency of the quartz crystal to decrease. We found that particles were adsorbed onto the gold-coated quartz crystal in air-rich water, but not in degassed water. This finding supports the long-standing hypothesis that nanobubbles play a key role in the long-range attractive force between hydrophobic surfaces in aqueous solutions. When the experiments were conducted using quartz crystals coated with a hydrophobic dodecanethiol SAM, the nanoparticles were adsorbed onto the surface even in degassed water due to the short-range hydrophobic interactions between the nanoparticles and the dodecanethiol molecules. In contrast, the nanoparticles were adsorbed to a lesser degree onto the hydrophilic mercaptoundecanoic acid-coated crystals due to electrostatic repulsive forces.     

Nanoengineered polymeric S-layers based capsules with targeting activity

Nanostructured polymeric capsules are regarded as highly promising systems with different potential applications ranging from drug delivery, biosensing and artificial cells. To fully exploit this potential, it is required to produce bio-activated stable and biocompatible capsules. To this purpose, in present work we proposed the combination of the layer-by-layer self assembly method with bacterial S-layer technology to fabricate stable and biocompatible polymeric capsules having a well defined arrangement of functional groups allowing the covalent attachment of antibody molecules. Hollow microcapsules were obtained by the layer-by-layer self assembly of oppositely charged polyelectrolytes onto colloidal particles, followed by removal of the cores at acidic pH. S-layers were crystallized onto the shell of the obtained capsules. Quartz crystal microbalance was used to characterize the crystallization process onto planar surfaces. S-layer containing capsules were investigated by atomic force microscopy. Immunoenzymatic tests were performed to assess the effective modification of the S-layer with antibody molecules both on planar surfaces and on hollow capsules. Fluorescent microscopy was employed to visualize the presence of the antibody molecules onto the capsule shell and immunological tests used to assess the bioactivity of the immobilized antibodies. Finally, the in vitro cytotoxicity of fabricated S-layer containing capsules was studied. The obtained results demonstrated the possibility to fabricate bio-activated S-layer containing capsules with improved features in terms of biocompatibility.     

Formation and recovery of a cell sheet by a particle monolayer with the surface roughness

We studied the topographical effect of roughness displayed by a closely packed particle monolayer on formation of a cell monolayer (cell sheet). Particle monolayers were prepared by Langmuir-Blodgett deposition using particles, which were 527nm (SA053) and 1270nm (SA127) in diameter. Human umbilical vein endothelial cells (HUVECs) were seeded at a high density (2.0 x10(5)cells/cm(2)) onto particle monolayers. It was found that cells gradually became into contact with adjacent cells on the SA053 monolayer and the formed cell sheet could be readily detached from the particle monolayer by gentle pipetting. On the other hand, cells adhering onto the tissue culture polystyrene (TCPS) and the SA127 particle monolayer were difficult to peel off. At a low cell seeding density (5.0x10(4)cells/cm(2)), pre-coating with bovine plasma fibronectin (FN) allowed cell growth on an SA053 particle monolayer, and a confluent monolayer was able to be peeled as a cell sheet from the particle monolayer just by pipetting. By immunostaining of human fibronectin, we found that fibronectin was secreted and concentrated onto the substrate side of a cell sheet. The obtained cell sheet adhered and grew on the TCPS again within 20min.     

Adsorption of Bovine Serum Albumin onto Polystyrene Latex Particles Bearing Saccharidic Moieties

The adsorption of bovine serum albumin (BSA) onto polystyrene latexes bearing various amounts of sugar moieties has been investigated as a function of pH and ionic strength and the results were compared to those for bare polystyrene latexes having negative surface charges. The functionalized latexes were produced by seeded copolymerization of (0.3 μm) liposaccharidic monomer onto polystyrene particles obtained by soap-free emulsion polymerization of styrene using potassium persulfate as initiator. At first, the electrophoretic mobility behavior of the various latexes was examined as a function of pH: a significant decrease was observed in the case of saccharide-containing latex particles compared to the bare particles. The adsorption of BSA onto these latexes exhibited a reduced amount of adsorbed BSA for those latex particles bearing saccharide groups. This adsorbed amount depends on the yield of saccharidic monomer incorporated onto the surfaces of the latex particles.     

Polystyrene-coated micropallets for culture and separation of primary muscle cells

Despite identification of a large number of adult stem cell types, current primary cell isolation and identification techniques yield heterogeneous samples, making detailed biological studies challenging. To identify subsets of isolated cells, technologies capable of simultaneous cell culture and cloning are necessary. Micropallet arrays, a new cloning platform for adherent cell types, hold great potential. However, the microstructures composing these arrays are fabricated from an epoxy photoresist 1002F, a growth surface unsuitable for many cell types. Optimization of the microstructures’ surface properties was conducted for the culture of satellite cells, primary muscle cells for which improved cell isolation techniques are desired. A variety of surface materials were screened for satellite cell adhesion and proliferation and compared to their optimal substrate, gelatin-coated Petri dishes. A 1-μm thick, polystyrene copolymer was applied to the microstructures by contact printing. A negatively charged copolymer of 5% acrylic acid in 95% styrene was found to be equivalent to the control Petri dishes for cell adhesion and proliferation. Cells cultured on control dishes and optimal copolymer-coated surfaces maintained an undifferentiated state and showed similar mRNA expression for two genes indicative of cell differentiation during a standard differentiation protocol. Experiments using additional contact-printed layers of extracellular matrix proteins collagen and gelatin showed no further improvements. This micropallet coating strategy is readily adaptable to optimize the array surface for other types of primary cells.     

Collagen nanofiber-covered porous biodegradable carboxymethyl chitosan microcarriers for tissue engineering cartilage

Nanofibrous collagen-coated porous carboxymethyl chitosan microcarriers (CMC-MCs) were successfully fabricated for use as injectable cell microcarriers. A modified phase separation method combined with temperature controlled freeze-extraction was used for formulating the CMC-MCs. Collagen nanofibers were immobilized onto the surfaces of the CMC-MCs via covalently anchoring some collagen molecules first and more molecules self-assembling into nano-scale fibrous networks afterward. Scanning electron microscopy and hydroxyproline colorimetry analysis revealed that more collagen was immobilized on the CMC-MCs with collagen molecules anchored initially. In vitro cell culture revealed that chondrocytes could adhere, proliferate, and remain differentiated on the nanofiber-coated CMC-MCs. Optical microscopy and confocal laser scanning microscopy showed that chondrocytes grew to confluence on the CMC-MCs within 3 days post-seeding. Subsequently, several confluent CMC-MCs attached to each other, forming tissue-like aggregates after 7 days culture. The mRNA expression of type II collagen was much stronger in chondrocytes cultured on the nanofiber-coated CMC-MCs for 7 days than those cultured in 24-well plates or on CMC-MCs without initial treatment. These porous CMC-MCs could be utilized for cultivating cells and for application in cartilage tissue engineering as injectable scaffolds for cell delivery.     

One-step pyrolysis process to synthesize dispersed Pt/carbon hollow nanospheres catalysts for electrocatalysis

An effective method for loading Pt nanoparticles on monodispersed hollow carbon nanospheres by one-step pyrolysis of polystyrene spheres (PS) adsorbed with platinum (IV) ions was developed. The polystyrene spheres were firstly enwrapped with a layer of sucrose and cetyltrimethyl ammonium bromide (CTAB) micelles. Adsorption of platinum (IV) ions onto the polystyrene spheres was carried out via electrostatic interaction between the negatively charged platinum salt and the positively charged amino group in the CTAB. Pyrolysis of the PS-Pt (IV) precursors at 600 °C under nitrogen atmosphere resulted in the simultaneous decomposition of the sucrose to carbon and the adsorbed platinum complex to metallic Pt. During this process the polystyrene spheres was removed and hollow sphere of PtC formed. Nanocomposites of hollow carbon nanospheres with different platinum loading were synthesized and their electrocatalytic activity was evaluated using methanol as a model molecule. Results showed that the as-prepared hollow carbon nanospheres supported platinum catalysts have high electrocatalytic activity and long-term stability towards the oxidation of methanol. The present method is promising for the fabrication of carbon supported platinum catalysts for the direct methanol fuel cell.     

Light-to-electron converting panchromatic supramolecular solar cells of phthalocyanine-porphyrin heterodimers adsorbed onto nanocrystalline SnO2 electrodes

Broadband capturing supramolecular solar cells are constructed by layer-by-layer deposition of oppositely charged phthalocyanine and porphyrin dyes onto the SnO(2) surface.