Identification and determination of oxytetracycline, tiamulin, lincomycin, and spectinomycin in veterinary preparations by thin-layer chromatography/densitometry

A thin-layer chromatographic/densitometric method was developed for the identification and quantitation of oxytetracycline, tiamulin, lincomycin, and spectinomycin in veterinary preparations. Silica gel-coated thin layer chromatography plates and 2 mobile phases were used to separate these constituents. The appropriate compositions of the suitable mobile phases were established: 10% citric acid solution-n-hexane-ethanol (80 + 1 + 1, v/v) and n-butanol-ethanol-chloroform-25% ammonia (4 + 5 + 2 + 5, v/v). Along with Rf values and spot colors, direct UV and visual densitometric measurements were used for identification. Similar measuring ranges were used for quantitative analysis to obtain repeatable and reliable results for the preparations examined. The results of the quantitative analysis are characterized by a small confidence interval and are close to the declared contents of active constituents: oxytetracycline 30.01 +/- 0.38 g at lambda = 350 nm and 30.24 +/- 0.86 g at lambda = 430 nm; tiamulin, 10.19 +/- 0.86 g at lambda = 450 nm; lincomycin, 2.27 +/- 0.08 g at lambda = 278 nm; and spectinomycin, 2.18 +/- 0.07 g at lambda = 421 nm. The recoveries for all antibiotics ranged from 100.01 to 102.54%.     

Stress degradation studies and development of stability-indicating TLC-densitometry method for determination of prednisolone acetate and chloramphenicol in their individual and combined pharmaceutical formulations

ABSTRACT: A rapid and reproducible stability indicating TLC method was developed for the determination of prednisolone acetate and chloramphenicol in presence of their degraded products. Uniform degradation conditions were maintained by refluxing sixteen reaction mixtures for two hours at 80°C using parallel synthesizer including acidic, alkaline and neutral hydrolysis, oxidation and wet heating degradation. Oxidation at room temperature, photochemical and dry heating degradation studies were also carried out. Separation was done on TLC glass plates, pre-coated with silica gel 60F-254 using chloroform: methanol (14:1 v/v). Spots at Rf 0.21 ± 0.02 and Rf 0.41 ± 0.03 were recognized as chloramphenicol and prednisolone acetate, respectively. Quantitative analysis was done through densitometric measurements at multiwavelength (243 nm, λmax of prednisolone acetate and 278 nm, λmax of chloramphenicol), simultaneously. The developed method was optimized and validated as per ICH guidelines. Method was found linear over the concentration range of 200-6000 ng/spot with the correlation coefficient (r2 ± S.D.) of 0.9976 ± 3.5 and 0.9920 ± 2.5 for prednisolone acetate and chloramphenicol, respectively. The developed TLC method can be applied for routine analysis of prednisolone acetate and chloramphenicol in presence of their degraded products in their individual and combined pharmaceutical formulations.     

Effective separation and simultaneous analysis of anabolic androgenic steroids (AAS) in their pharmaceutical formulations by a validated TLC-densitometry method

ABSTRACT: A TLC densitometric method was developed for simultaneous determination of four anabolic androgenic steroids (AAS) of testosterone derivatives including testosterone propionate (TP), testosterone phenyl propionate (TPP), testosterone isocaproate (TI) and testosterone deaconate (TD) in their pharmaceutical products. Separation was carried out on Al based TLC plates, pre-coated with silica gel 60F-254 using hexane and ethyl acetate (8.5:1.5, v/v). Spots at Rf 0.31+/-0.01, 0.34+/-0.01, 0.40+/-0.01 and 0.45+/-0.02 were recognized as TPP, TP, TI and TD, respectively. Quantitative analysis was done by densitometric measurements at lambdamax 251 nm for all derivatives. The developed method was validated as per ICH guidelines. Method was found linear over the concentration range of 200-1200 ng/spot with the correlation coefficient of 0.995, 0.993, 0.995 and 0.996 for TP, TPP, TI, TD, respectively. Limit of detection for all derivatives were in the range of 16.7-22.3 ng/spot while limit of quantitation were found to be in the range of 55.7-70.9 ng/spot. The developed TLC method can be applied for the simultaneous routine analysis of testosterone derivatives in their individual and combined pharmaceutical formulations.     

Development and validation of spectrophotometric, TLC and HPLC methods for the determination of lamotrigine in presence of its impurity

Three reliable, rapid and selective methods have been developed and validated for the determination of lamotrigine in the presence of its impurity, 2,3-dichlorobenzoic acid. The first method is spectrophotometric method using p-chloranilic acid forming a colored product with lambda(max) 519+/-2 nm. All variables affecting the reaction have been investigated and the conditions were optimized. Beer's law was obeyed over a concentration range of 10-200 microg ml(-1) with mean accuracy 100.13+/-0.44%. The molar ratio of the formed ion-association complex is found to be 1 : 1 as deduced by Job's method. The conditional stability constant (K(f)), standard free energy (DeltaG), molar absorptivity(epsilon), and sensitivity index were evaluated. The second method is based on TLC separation of the cited drug (Rf=0.75+/-0.01) from its impurity (Rf=0.23+/-0.01) followed by densitometric measurement of the intact drug spots at 275 nm. The separation was carried on silica gel plates using ethyl acetate : methanol : ammonia 35% (17 : 2 : 1 v/v/v) as a mobile phase. The linearity range was 0.5-10 microg/spot with mean accuracy 99.99+/-1.33%. The third method is accurate and sensitive stability-indicating HPLC method based on separation of lamotrigine from its impurity on a reversed phase C(18) column, using a mobile phase of acetonitrile : methanol : 0.01 M potassium orthophosphate (pH 6.7+/-0.1) (30 : 20 : 50 v/v/v) at ambient temperature 25+/-5 degrees C and UV detection at 275 nm in an overall analysis time of about 6 min., based on peak area. The injection repeatability, intraday and interday repeatability were calculated. The procedure provided a linear response over the concentration range 1-12 microg ml(-1) with mean accuracy of 99.50+/-1.30%. The proposed methods were successfully applied for the determination of lamotrigine in bulk powder, in dosage form and in presence of its impurity. The results obtained were analyzed by ANOVA to assess that no significant difference between each of the three methods and the reported one. The validation was performed according to USP guidelines.     

TLC chromatographic-densitometric assay of ibuprofen and its impurities

A simple and sensitive thin-layer chromatographic (TLC)-densitometric method for the quantitative estimation of S(+)-2-[4-isobutylphenyl]propionic acid (ibuprofen) and its impurities in pharmaceutical preparations has been developed. The chromatographic separation was carried out on silica gel 60 F(254) TLC plates using toluene-ethyl acetate-glacial acetic acid (17:13: 1, v/v/v) as the mobile phase. Detection was carried out densitometrically with a UV detector. The developed method has detection and quantitation limits ranging from 0.13 μg per spot to 0.72 μg per spot. For individual constituents the recovery ranged from 96.8% to 99.0%. In addition, the stability of ibuprofen solutions was investigated, including the effect of pH, temperature, and incubation time. The method is rapid, simple, and suitable for routine quality-control analysis of pharmaceuticals containing ibuprofen.     

Thin-layer chromatography-densitometric measurements for determination of N-(hydroxymethyl)nicotinamide in tablets and stability evaluation in solutions

A thin-layer chromatography (TLC)-densitometric method was developed to determine N-(hydroxymethyl)nicotinamide in tablets and basic solutions along with nicotinic acid. Analysis was performed on silica gel F254 plates using chloroform-ethanol (2 + 3, v/v) mobile phase. The densitometric observations were made at 260 nm. The results showed good precision and accuracy; relative standard deviation was 2.37%, and recovery ranged from 97.60 to 100.82%. The limit of detection was 0.1 microg/spot, while the linearity range was from 0.2 to 1.75 microg/spot. Applicability of the newly developed method was tested for determination of N-(hydroxymethyl)nicotinamide in the preparation Cholamid. Densitometric measurements were used to evaluate stability of N-(hydroxymethyl)nicotinamide in basic solutions. It was found that decomposition corresponded to first-order reaction kinetics. The computed kinetic and thermodynamic parameters at 30 degrees C were as follows: k = 0.00675/min, t0,5 = 1.71 h, t0,1 = 0.26 h, and Ea = 44.75 kJ/mol.     

Identification and quantitation of polymyxin B, framycetin, and dexamethasone in an ointment by using thin-layer chromatography with densitometry

A new thin-layer chromatographic-densitometric method has been developed for rapid identification and quantitative determination of polymyxin B, framycetin, and dexamethasone in a dental ointment. Silica gel 60 and F254 silica gel 60 plates were used for separating antibiotics and dexamethasone acetate, respectively. When determining framycetin and polymyxin B, chromatograms were developed by using 2 mobile phases, namely methanol and methanol-n-butanol-ammonia (25%)-chloroform (14 + 4 + 9 + 12, v/v/v/v/). The densitometric measurements were made at 550 nm after detection with 0.3% ninhydrin solution. Dexamethasone was determined by using the mobile phase cyclohexane-ethyl acetate (2 + 3, v/v) and ultraviolet densitometric recording at 245 nm. The results obtained for individual constituents with the chromatographic-densitometric method demonstrate similar accuracy, relative standard deviation values from 1.49 to 2.47%, and relative error values from 0.02 to 0.81% and are comparable to those obtained with the reference methods.     

Determination of 6-gingerol in ginger (Zingiber officinale) using high-performance thin-layer chromatography

A sensitive and accurate High-Performance TLC (HPTLC) method has been developed to determine the quantity of 6-gingerol in rhizomes of Zingiber officinale (family: Zingiberaceae), commonly known as ginger. Methanol extracts of rhizomes from three different sources were used for HPTLC, n-hexane, and diethyl ether (40:60 v/v) as the mobile phase. The Rf of 6-gingerol was found to be 0.40. The calibration plot was linear in the range of 250-1200 ng of 6-gingerol and the correlation coefficient of 0.9997 was indicative of good linear dependence of peak area on concentration. The mean quantity of 6-gingerol was found to be 60.44+/-2.53 mg/g of ginger extract. The method permits reliable quantification of 6-gingerol and good resolution and separation of 6-gingerol from other constituents of ginger. To study the accuracy and precision of the method, recovery studies were performed by the method of standard addition. Recovery values from 99.79 to 99.84% showed the excellent reliability and reproducibility of the method. The proposed HPTLC method for quantitative monitoring of 6-gingerol in ginger can be used for routine quality testing of ginger extracts.     

Investigation of phenolic acids in yacon (Smallanthus sonchifolius) leaves and tubers

Thin-layer chromatographic (TLC) screening of crude extracts of dried leaves and tubers of yacon (Smallanthus sonchifolius, Asteraceae) and products of acid hydrolysis of tubers on the silica gel HPTLC plates using the developing solvents ethyl acetate-formic acid-water (85:10:15, v/v/v) and n-hexane-ethyl acetate-formic acid (20:19:1, v/v/v) proved the presence of chlorogenic, caffeic and ferulic acid. These phenolic acids were isolated from the crude extract of yacon leaves by preparative TLC, and identified after elution by HPLC/MS, as well as by direct injection of the crude extract into the HPLC/MS system. Acid hydrolysis of tubers released the increased amount of phenolic acids (e.g. caffeic acid and ferulic acid), flavonoid quercetin and an unidentified flavonoid, which was detected by TLC analysis. Ferulic acid, isomers of dicaffeoylquinic acid and still an unidentified derivative of chlorogenic acid (Mr = 562) as constituents of yacon leaves and ferulic acid as constituent of yacon tubers are reported here for the first time. These acids gave significant contribution to the radical scavenging activity detected directly on the TLC plate sprayed with 1,1-diphenyl-2-picrylhydrazyl (DPPH).     

Simultaneous high-performance thin-layer chromatography densitometric assay of trandolapril and verapamil in the combination preparation

A high-performance thin-layer chromatography (TLC) method coupled with densitometric analysis has been developed for simultaneous measurement of trandolapril (TRA) and verapamil (VER) in 2-component mixtures and in their combination capsules. The active substances were extracted from capsules with methanol (mean recovery: 103.4% for TRA, 97.13% for VER) and chromatographed on TLC plates coated with silica gel 60 F254 in horizontal chambers with ethyl acetatc-ethanol-acetic acid (8 + 2 + 0.5, v/v) mobile phase. Chromatographic separation of these components was followed by ultraviolet densitometric quantification at 215 nm. The calibration graphs were constructed over the concentration range from 0.5 to 1.5 microg/microL (corresponding to 5.0-15.0 microg/spot) for both drugs with good correlation (r > or = 0.990). Detection and quantitation limits were found to be 1.25 and 3.75 microg/spot for TRA and 0.15 and 0.45 microg/spot for VER, respectively. The proposed method was used for determination of both drugs in TRA-VER capsules with satisfactory precision [0.97% < relative standard deviation (RSD) < 4.50% for TRA, 0.49% < RSD < 3.10% for VER] and accuracy [2.16% < relative error (RE) < 4.90% for TRA, 1.73% < RE < 5.68% for VER].     

Stability-indicating thin-layer chromatographic method for quantitative determination of ribavirin

A simple and accurate stability-indicating thin-layer chromatographic (TLC) method is developed and validated for the quantitative determination of ribavirin (RBV) in its bulk and with used for development consists of chloroform-methanol-acetic acid (60:15:15, v/v/v). The separated spots are visualized as bluish green spots after being sprayed with anisaldehyde reagent. RBV is subjected to different accelerated stress conditions. The drug is found to undergo degradation under all stress conditions, and the degradation products are well resolved from the pure drug with significantly different Rf values. The optical densities of the separated spots are found to be linear with the amount of RBV in the range of 5-40 microg/spot with a good correlation coefficient (r=0.9980). The limit of detection and limit of quantitation values are 1.40 and 4.67 microg/spot, respectively. Statistical analysis proves that the method is repeatable and accurate for the determination of RBV in the presence of its degradation products. The method meets the International Conference on Harmonisation/Food and Drug Administration regulatory requirements. The proposed TLC method is successfully applied for the determination of RBV, pure and in capsules, with good accuracy and precision; the label claim percentages are 98.8%+/-1.5%. The results obtained by the proposed TLC method are comparable with those obtained by the official method.     

Improved thin-layer chromatographic method for the separation of cholesterol,egg phosphatidylcholine,and their degradation products

Degradation products of egg phosphatidylcholine (EPC) and cholesterol were analyzed with different normal- and reversed-phase thin-layer chromatography (TLC) systems. The best separation, in terms of the highest number of degradation products from both analytes, was obtained with a reversed-phase system, using butanol-methanol-water-96-98% (v/v) acetic acid (40 + 40 + 20 + 4, v/v/v/v) as the mobile phase after overnight saturation at 25 degrees C. A special development technique was used. After a first development, the plate was dried and a second development was performed in the same direction. This method enabled us to separate lysophosphatidylcholine, several free fatty acids and hydroperoxides, and several undefined degradation products of EPC and cholesterol. All products were visualized after the plate was dipped in a 1% (v/v) solution of 4-methoxybenzaldehyde in 98% sulfuric acid-96-98% (v/v) acetic acid-ethanol-water (2 + 10 + 60 + 30), presenting a blue color or a white spot against a colored background. After activation at 110 degrees C, a stable color for both analytes was reached after 12 min. Precision of <5% was obtained at 2 levels of analysis. Good linearity was obtained in the range of 5-30 microg for EPC (r = 0.991) and 5-40 microg for cholesterol (r = 0.991). These results show that TLC can be an inexpensive and easy alternative for the analysis of EPC and cholesterol.     

Estimation of trans-resveratrol in herbal extracts and dosage forms by high-performance thin-layer chromatography

A simple, sensitive and precise high-performance thin-layer chromatographic (HPTLC) method of analysis of trans-resveratrol in Polygonum cuspidatum root extracts and in dosage forms was developed and validated. The separation was carried out on a TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase, eluted with chloroform-ethylacetate-formic acid (2.5 : 1 : 0.1) as mobile phase. Densitometric analysis of trans-resveratrol was carried out in the absorbance mode at 313 nm. This system was found to give compact spot for trans-resveratrol (Rf value of 0.40+/-0.03). A good linear regression relationship between peak areas and the concentrations was obtained over the range of 0.5-3.0 microg/spot with correlation coefficient 0.9989. The limit of detection and quantification was found to be 9 and 27 ng/spot. The method was validated for precision and recovery. The spike recoveries were within 99.85 to 100.70%. The RSD values of the precision in the range 0.37-1.84%. The proposed developed HPTLC method can be applied for identification and quantitative determination of trans-resveratrol in herbal extracts and dosage forms.     

HPLC, TLC, and first-derivative spectrophotometry stability-indicating methods for the determination of tropisetron in the presence of its acid degradates

Three stability-indicating assay methods were developed for the determination of tropisetron in a pharmaceutical dosage form in the presence of its degradation products. The proposed techniques are HPLC, TLC, and first-derivative spectrophotometry (1D). Acid degradation was carried out, and the degradation products were separated by TLC and identified by IR, NMR, and MS techniques. The HPLC method was based on determination of tropisetron in the presence of its acid-induced degradation product on an RP Nucleosil C18 column using methanol-water-acetonitrile-trimethylamine (65 + 20 + 15 + 0.2, v/v/v/v) mobile phase and UV detection at 285 nm. The TLC method was based on the separation of tropisetron and its acid-induced degradation products, followed by densitometric measurement of the intact spot at 285 nm. The separation was carried out on silica gel 60 F254 aluminum sheets using methanol-glacial acetic acid (22 + 3, v/v) mobile phase. The 1D method was based on the measurement of first-derivative amplitudes of tropisetron in H2O at the zero-crossing point of its acid-induced degradation product at 271.9 nm. Linearity, accuracy, and precision were found to be acceptable over concentration ranges of 40-240 microg/mL, 1-10 microg/spot, and 6-36 micro/mL for the HPLC, TLC, and 1D methods, respectively. The suggested methods were successfully applied for the determination of the drug in bulk powder, laboratory-prepared mixtures, and a commercial sample.     

Column and thin-layer chromatographic methods for the simultaneous determination of acediasulfone in the presence of cinchocaine, and cefuroxime in the presence of its hydrolytic degradation products

Column liquid chromatography (LC) and thin-layer chromatography (TLC)-densitometry methods are described for simultaneous determination of acediasulfone (Ace) and cinchocaine (Cinco). In the LC method, the separation and quantitation of the 2 drugs was achieved on a Zorbax C8 column (5 microm, 150 x 4.6 mm id) using a mobile phase composed of methanol-phosphate buffer, pH 2.5 (66 + 34, v/v), at a flow rate of 1 mL/min and ultraviolet detection at 300 and 327 nm for Ace and Cinco, respectively. The method showed linearity over concentration ranges of 20-200 and 45-685 microg/mL, respectively. In the TLC-densitometry method, a mobile phase composed of methanol-tetrahydrofuran-acetic acid (45 + 5 + 0.5, v/v/v) was used for the separation of the 2 drugs. The linearity range was 0.5-4 and 2-9 microg/spot, respectively. In addition, stability indicating TLC-densitometry method has been developed for determination of cefuroxime sodium in the presence of 5-70% of its known hydrolytic degradation products. The mobile phase butanol-methanol-tetrahydrofuran-concentrated ammonium hydroxide (50 + 50 + 50' + 5, v/v/v/v) was used. The concentration range was 2-10 microg/spot. The optimized methods proved to be specific and accurate for the analysis of the cited drugs in laboratory-prepared mixtures and dosage forms. The obtained results agreed statistically with those obtained by the reference methods.     

Simultaneous determination of losartan and hydrochlorothiazide in combined dosage forms by first-derivative spectroscopy and high-performance thin-layer chromatography.

Losartan (LST) is the first orally active nonpeptide angiotensin-II receptor antagonist with an improved safety and tolerability profile. It is prescribed alone or in combination with hydrochlorothiazide (HCTZ) for the treatment of moderate-to-severe hypertension. This paper describes the development of 2 methods that use different techniques, first-derivative spectroscopy and high-performance thin-layer chromatography (HPTLC), to determine LST and HCTZ in the presence of each other. LST and HCTZ in combined preparations were quantitated by using the first-derivative responses at 271.6 nm for LST and 335.0 nm for HCTZ in spectra of their solutions in water. The linearity ranges are 30-70 microg/mL for LST and 7.5-17.5 microg/mL for HCTZ with correlation coefficients of 0.9998 and 0.9997, respectively. In the HPTLC method, a mobile phase of chloroform-methanol-acetone-formic acid (7.5 + 1.5 + 0.5 + 0.03, v/v) and a prewashed Silica Gel G60 F254 TLC plate as the stationary phase were used to resolve LST and HCTZ in a mixture. Two well-separated and sharp peaks for LST and HCTZ were obtained at Rf values of 0.61+/-0.02 and 0.41+/-0.02, respectively. LST and HCTZ were quantitated at 254.0 nm. The linearity ranges obtained for the HPTLC method are 400-1200 and 100-300 ng/spot with corresponding correlation coefficients of 0.9944 and 0.9979, for LST and HCTZ, respectively. Both methods were validated, and the results were compared statistically. They were found to be accurate, specific, and reproducible. The methods were successfully applied to the estimation of LST and HCTZ in combined tablet formulations.     

Simultaneous determination of atorvastatin calcium and ramipril in capsule dosage forms by high-performance liquid chromatography and high-performance thin layer chromatography

Two simple and accurate methods to determine atorvastatin calcium and ramipril in capsule dosage forms were developed and validated using HPLC and HPTLC. The HPLC separation was achieved on a Phenomenex Luna C18 column (250 x 4.6 mm id, 5 microm) in the isocratic mode using 0.1% phosphoric acid-acetonitrile (38 + 62, v/v), pH 3.5 +/- 0.05, mobile phase at a flow rate of 1 ml/min. The retention times were 6.42 and 2.86 min for atorvastatin calcium and ramipril, respectively. Quantification was achieved with a photodiode array detector set at 210 nm over the concentration range of 0.5-5 microg/mL for each, with mean recoveries (at three concentration levels) of 100.06 +/- 0.49% and 99.95 +/- 0.63% RSD for atorvastatin calcium and ramipril, respectively. The HPTLC separation was achieved on silica gel 60 F254 HPTLC plates using methanol-benzene-glacial acetic acid (19.6 + 80.0 + 0.4, v/v/v) as the mobile phase. The Rf values were 0.40 and 0.20 for atorvastatin calcium and ramipril, respectively. Quantification was achieved with UV densitometry at 210 nm over the concentration range of 50-500 ng/spot for each, with mean recoveries (at three concentration levels) of 99.98 +/- 0.75% and 99.87 +/- 0.83% RSD for atorvastatin calcium and ramipril, respectively. Both methods were validated according to International Conference on Harmonization guidelines and found to be simple, specific, accurate, precise, and robust. The mean assay percentages for atorvastatin calcium and ramipril were 99.90 and 99.55% for HPLC and 99.91 and 99.47% for HPTLC, respectively. The methods were successfully applied for the determination of atorvastatin calcium and ramipril in capsule dosage forms without any interference from common excipients.     

Analysis of ciprofloxacin by a simple high-performance liquid chromatography method

A simple and sensitive high-performance liquid chromatographic method is described for the quantitative analysis of ciprofloxacin in pharmaceuticals and human plasma. The method employs reversed-phase chromatography using an RP-C18 column with an isocratic mobile phase of acetonitrile-2% acetic acid aqueous solution (16:84, v/v), umbelliferone as an internal standard, and a flow rate of 1.0 mL/min. The UV detector is set at 280 nm. The limit of detection is 0.25 microM (S/N = 3, injection volume = 10 microL). The regression equations are linear (r > 0.9999) over a range between 0.51 approximately 130 microM for the pharmaceutical analysis of ciprofloxacin and 0.51 approximately 64.8 microM for the biological analysis of ciprofloxacin in human plasma. The intra- and inter-day relative standard deviation and relative error are less than 3.39% and 5.71%, respectively. All the recoveries are greater than 93.8%. This method is successfully applied in a pharmacokinetic study of a volunteer who receives a 500 mg ciprofloxacin tablet.     

铽增敏高效液相色谱柱后衍生荧光检测法同时检测鸡肉中的三种氟喹诺酮类药物残留

基于氟喹诺酮类药物与铽离子形成配合物后的荧光增强作用,建立了同时检测鸡肉中氟喹诺酮类(FQs)药物环丙沙星、诺氟沙星和恩诺沙星残留的Tb3+增敏高效液相色谱（HPLC）柱后衍生荧光检测方法。优化的实验条件如下：流动相为0.05 mol/L 醋酸/醋酸钠缓冲液(pH 6.0)-乙腈(体积比为89∶11),色谱柱为Hypersil BDS-C18,柱温40 ℃,流速0.8 mL/min;Tb3+浓度为8×10-5 mol/L;衍生反应温度40 ℃,衍生泵流速0.5 mL/min;荧光检测激发波长271 nm,发射波长545 nm。实验结果表明,将上述3种药物以1.0,10.0,50.0,100.0 ng/g水平添加到鸡肉后的回收率范围为66.3%~88.0%,相对标准偏差（RSD）均小于15.0%。定量分析的线性范围为0.1~500 ng/mL,方法的日内和日间RSD均小于13.0%;最低检出限分别为0.05(环丙沙星)、0.05(诺氟沙星)和0.08(恩诺沙星)ng/g,比前人报道的非衍生高效液相色谱荧光检测法检测FQs药物的灵敏度有极大的提高。该项研究为FQs药物多残留检测提供了灵敏度更高的新方法。     

胶束毛细管电泳在线推扫技术分离检测猪肉组织中痕量喹诺酮类药物

利用胶束毛细管电泳法结合在线推扫富集技术对组织中残留的痕量环丙沙星、氧氟沙星和恩诺沙星进行了检测, 弥补了毛细管电泳检测灵敏度低的缺点, 大大减化了操作过程, 为动物食品组织中残留的痕量药物检测提供了一种新的简便可靠的方法.