检测肠毒素用酶免疫电极动力学参数的测定

应用恒电位极化法探讨了酶免疫电极的响应机理 ,通过旋转圆盘电极确定了生物电极的速度控制步骤 ,根据交流阻抗谱的分析 ,计算了各种生物电极在不同电极电位下的动力学参数 ,并进行了比较分析 .     

高载酶量酶/酶免疫电极的制备及其电化学机理研究

本文利用扫描电镜和电化学方法确定了最佳镀铂电位,并进一步研究了酶电极和酶免疫电极在基体电极镀铂和未镀铂条件下的米氏常数、电化学反应速率常数和反应速度控制步骤。比较分析了生物电极的最佳实验条件。     

生物功能电极 Ⅲ.葡萄糖氧化酶的电化学固定化研究

利用磷酸盐缓冲溶液中吡咯的电聚合,将葡萄糖氧化酶(GOD)包埋在聚吡咯(PPy)基质中以构成生物功能电极。讨论了溶液pH和聚合电位对酶固定化的影响,并用IR和交流阻抗谱对酶膜进行表征。GOD的固定化只有当pH>5.5时才能实现,由此推测酶是以带负电的粒子嵌入PPy的。交流阻抗谱表明这一电极具有有界多孔电极的特征。探索了酶与电子传递体Fe(CN)_6~(3-)同时固定化的可行性。电化学固定化的GOD保持其生物催化活性,酶反应表观上遵循Michealis-Menten动力学。     

生物功能电极 III. 葡萄糖氧化酶的电化学固定化研究

利用磷酸盐缓冲溶液中吡咯的电聚合, 将葡萄糖氧化酶(GOD)包埋在聚吡咯(PPy)基质中以构成生物功能电极。讨论了溶液pH和聚合电位对酶固定化的影响, 并用IR和交流阻抗谱对酶膜进行表征。GOD的固定化只有当pH>5.5时才能实现, 由此推测酶是以带负电的粒子嵌入PPy的。交流阻抗谱表明这一电极具有有界多孔电极的特征。探索了酶与电子传递体Fe(CN)_6~(3-)同时固定化的可行性。电化学固定化的GOD保持其生物催化活性, 酶反应表观上遵循Michealis-Menten动力学。     

OPD-H2O2-HRP伏安酶联免疫分析体系酶催化反应的研究

应用电化学分析、高效液相色谱、紫外-可见光谱、红外光谱和核磁共振等技术对邻苯二胺(OPD)-H2O2-辣根过氧化物酶(HRP)伏安酶联免疫分析体系的酶催化反应进行了详细深入的研究.用化学方法制得了HRP酶催化H2O2氧化OPD的产物纯品.伏安法和高效液相色谱实验说明,在所选择的酶催化反应条件下,酶催化反应只生成一种产物;经紫外-可见光谱,红外光谱和13C核磁共振谱鉴定,产物为2,3-二氨基吩嗪.写出了酶催化反应过程,同时对酶催化反应产物的电极还原过程也进行了研究.     

辣根过氧化物酶的电化学固定化及其对H2O2的生物电催化…

利用电化学固定化方法制备了聚吡咯／辣根过氧化物酶（ＰＰ／ＨＲＰ）膜电极，并研究了其电化学行为，在除氧的磷酸盐缓冲液介质中，ＰＰ／ＨＲＰ电极加速Ｈ２Ｏ２的还原，归因子酶加成物的直接电子传递，探索ＨＲＰ与电子传递体Ｋ４Ｆｅ（ＣＮ）６在聚吡咯（ＰＰ）膜中的同时固定化条件及其膜电极的电化学行为，实验证实，Ｋ４Ｆｅ（ＣＮ）６在酶膜中的存在使得Ｈ２Ｏ２的还原电位强烈正移，在－０．０５Ｖ的工作电位下能对Ｈ２Ｏ２     

银电极在Na2SO4溶液中氧化还原过程的原位拉曼光谱研究

采用原位拉曼光谱结合循环伏安法研究银电极在０．１ｍｏｌ／Ｌ的Ｎａ２ＳＯ４溶液中不同电位下的氧化还原过程，在电位扫描过程中，实时记录的拉曼光谱表明，电极表面在０．２Ｖ开始生成吸附原子氧物种，当电位正于０．４Ｖ，部分吸附的原子氧扩散进入电极的亚表面区，而另一些则通过强的化学吸附与银表面成键；同时部分银氧化为＋１价，各谱带的产生和消失与氧化还原电流峰有很好的对应关系，表明电化学原位拉曼光谱能在分子水平上     

钴电极在碱性溶液中氧化还原反应的现场共聚焦显微喇曼光 …

采用现场共聚焦显微喇曼光谱研究钴电极在碱性溶液中的氧化还原行为和生成物的喇曼光谱特征。研究结果表明：电位正向扫描时,在－０．６４Ｖ左右Ｃｏ氧化生成Ｃｏ（ＯＨ）２和ＣｏＯ,随着电位正移逐步生成Ｃｏ３Ｏ４,在正电位区电极表面层主要是Ｃｏ３Ｏ４,ＣｏＯＯＨ和ＣｏＯ２等;电位负向扫描时,电极由的高价含氧化合物相继还原为Ｃｏ３Ｏ４和Ｃｏ（ＯＨ）２,并最终还原为Ｃｏ。由不同电位下的生成物的喇曼光谱可以看出;电     

时间分辨表面增强拉曼光谱(TRSERS)研究硫脲衍生物与ClO4^-的共吸附行为

运用时间分辨表面增强拉曼光谱(TRSERS)结合电位双阶跃的方法, 研究了硫脲衍生物甲基硫脲(MTU)和烯丙基硫脲(ATU)在银电极表面与ClO4^-离子的共吸附行为, SERS强度-时间曲线表明它们各自相应的SERS谱峰强度随电位阶跃的响应速率不同, 离电极表面较近的基团的特征谱峰强度的响应速率较快; MTU以S端且垂直吸附在电极表面,ATU也以S端和表面发生化学吸附, 但整个分子斜躺吸附在电极表面上。     

酶/酶免疫电极最佳制备方式的确定及其微观分析

利用电化学方法测定各种实验条件下酶电极、酶免疫电极的电化学响应特性 ,以期确定这种新型生物电极的最佳制备条件 ,为生物传感器的应用提供可靠依据     

Solubility Parameters Based on IR and NIR Spectra: I. Correlation to Polar Solutes and Binary Systems

IR and NIR spectra were correlated to Hildebrand and Hansen solubility parameters through use of multivariate data analysis. PLS‐1 models were developed and used to predict solubility parameters for solvents, crude oils, and SARA fractions. PLS regression showed potential for good correlation of the solubility parameters with IR and NIR spectra. Principal component analysis of IR spectra showed that crude oils are grouped according to their relative contents of heavy components such as asphaltenes. PCA of IR spectra for SARA fractions resulted in obvious groupings of the respective fractions. Prediction of solubility parameters from IR spectra of polymers, crude oils, and SARA fractions gave values that are comparable to literature values. This study indicates that correlation of solubility parameters with IR and NIR spectra is possible. In turn, it may be possible to develop models that can predict the polarities of crude oils and crude oil fractions such as resins and asphaltenes.     

红外光谱数据的小波压缩和重建

介绍了小波变换及多分辨分析理论，并利用Ｄａｕｂｅｃｈｉｅｓ的正交紧支集小波基和Ｍａｌｌａｔ算法实现了对红外光谱数据的压缩和重建。计算表明，即使对原始数据压缩５倍，仍能很好地重建原有图谱，重建光谱数据与原始光谱数据之间的均方差为０．２６０。这为光谱数据的存储、检索和处理带来了方便。     

A study of gelatin by IR spectroscopy

Samples of freshly prepared soluble, naturally aged soluble, and insoluble gelatins (an accumulation of glue taken from a wooden sculpture of the XVth century) before and after heating at 210°C have been investigated by IR spectroscopy. The IR spectra of the samples before heating consisted of the characteristic spectra of collagen or gelatin although there were differences in the 1380–1460 cm^?1 region of the spectra. After the samples had been heated, the IR spectra of the soluble gelatins differed from those of the unheated samples. The changes in the IR spectra are discussed in connection with the probable structural rearrangements taking place in the natural ageing of gelatin.     

The infrared spectra of matrix isolated uracil and thymine: An assignment based on new theoretical calculations

The IR spectra of uracil and thymine predicted theoretically at the ab initio Hartree-Fock level with 6-31G basis set are reported and compared with Ar matrix experimental spectra. The IR spectra computed at the SCF/6-31G level reproduce the experimental spectra with an accuracy which allows a reliable vibrational assignment. A split valence basis set, augmented with polarization functions on all atoms, was found to be quite sufficient for a reliable prediction and assignment of the IR absorption bands in the spectra of medium-sized molecules.     

Prediction of olefin IR spectra reasoning from their mass spectra

Possible appliance of low resolution mass spectra in QSPR studies to predict IR spectra of olefins in gas phase is considered. The prediction quality is characterized by values of correlation coefficients from 0.961 to 1.00 between computed and experimental vector representations of IR spectra.     

Qualitative and quantitative evaluation of chrysotile and crocidolite fibers with IR-spectroscopy: application to asbestos-cement products

Infrared (IR) spectrophotometry allows simple and quick qualitative and quantitative evaluations of different kinds of asbestos, as well as of other inorganic particles. In particular, chrysotile and crocidolite have characteristic IR spectra and optical density measures of 2,710 nm band for chrysotile, of 12,820 nm band for crocidolite permit quantitative evaluation of each fiber alone or in mixture. IR spectra also give informations about changes of fiber structure and of chemical composition due, for example, to thermal treatment or acid leaching. The analytical method we developed can detect levels as low as 0.1 mg of fiber in a 300 mg disk of KBr using a low cost IR spectrophotometer. The use of a Fourier Transform IR spectrophotometer (FTIR) improves dramatically the sensitivity and selectivity. Computer assisted analysis of spectra offers the possibility to reduce matrix interferences and to compare different spectra. Examples of IR technique applied to asbestos-cement products and insulating materials are presented.     

The IR spectra and hydrogen bonding of toluene-2,6-bis(methyl) and 4,4′-diphenylmethane-bis(methyl) carbamates

The IR spectroscopy has been used to study models of polyurethanes containing different hard segments. The spectra of toluene-2,6-bis(methyl) and 4,4′-diphenylmethane-bis(methyl) carbamates at different temperatures were studied. The absorption curves of the free and associated carbamate molecules were compared with experimental IR spectra. The characteristic features of toluene-2,6-bis(methyl) carbamate and methyl-N-methyl carbamate clusters were revealed. The IR spectra for the two most stable toluene-2,6-bis(methyl) carbamate conformations were compared. The origin of the multiplet structure of bands in the experimental IR spectra of polyurethanes was discussed. The results obtained can be used for the analysis of the chemical and physical transformations in urethanes and polyurethanes.     

Theoretical prediction and the first IR matrix observation of several L-cysteine molecule conformers.

For the first time the argon-matrix low-temperature IR spectra of cysteine are recorded. They reveal a quite complicated spectral pattern, which can also be reproduced in the N2 matrix. Assignment of the observed spectra is undertaken on the basis of comparison of the experimental and calculated B3LYP/aug-cc-pVDZ anharmonic IR spectra. The presence of at least three, and possibly even six or more, cysteine conformers with and without intramolecular hydrogen bonding is confirmed. On the basis of the calculated vibrational circular dichroism spectra, we predict this technique to be more distinctive for conformers than IR absorption is.     

Gas‐Phase Peptide Structures Unraveled by Far‐IR Spectroscopy: Combining IR‐UV Ion‐Dip Experiments with Born–Oppenheimer Molecular Dynamics Simulations

Vibrational spectroscopy provides an important probe of the three‐dimensional structures of peptides. With increasing size, these IR spectra become very complex and to extract structural information, comparison with theoretical spectra is essential. Harmonic DFT calculations have become a common workhorse for predicting vibrational frequencies of small neutral and ionized gaseous peptides. ¹ Although the far‐IR region (<500 cm^?1) may contain a wealth of structural information, as recognized in condensed phase studies, ² DFT often performs poorly in predicting the far‐IR spectra of peptides. Here, Born–Oppenheimer molecular dynamics (BOMD) is applied to predict the far‐IR signatures of two γ‐turn peptides. Combining experiments and simulations, far‐IR spectra can provide structural information on gas‐phase peptides superior to that extracted from mid‐IR and amide A features.