Hair Growth Promoting Activity of Cedrol Nanoemulsion in C57BL/6 Mice and Its Bioavailability

As the main component of Platycladus orientalis, cedrol has known germinal activity. A range of cedrol formulations have been developed to prevent hair-loss, but compliance remains key issues. In this study, we prepared cedrol nanoemulsion (CE-NE) and determined the particle size and PDI (polydispersion coefficient), investigated the hair growth activity and studied the bioavailability in vitro and in vivo. Results showed that the average particle size of CE-NE is 14.26 ± 0.16 nm, and the PDI value is 0.086 ± 0.019. In vitro drug release investigation and drug release kinetics analysis showed release profile of CE from nanoparticles demonstrates the preferred partition of CE in buffer pH 4.0, the release profile of CE-NE showed a first-order kinetics reaching around 36.7% after 6 h at 37 °C. We artificially depilated the back hair of C57BL/6 mice and compared the efficacy of a designed cedrol nanoemulsion to an existing ointment group. The hair follicles were imaged and quantified using a digital photomicrograph. The results showed that compared with the ointment, CE-NE had positive effects on hair growth, improved drug solubility. Compared with the ointment and 2% minoxidil groups, 50 mg/mL CE-NE led to more robust hair growth. Pharmacokinetics analysis showed that the AUC_0–t of CE-NE was 4-fold higher than that of the ointment group, confirming that the bioavailability of the nanoemulsion was greater than that of the ointment. CE-NE also significantly reduced the hair growth time of model mice and significantly increased the growth rate of hair follicles. In conclusion, these data suggest that the nanoemulsion significantly improved the pharmacokinetic properties and hair growth effects cedrol, enhancing its efficacy in vitro and in vivo.     

Thymoquinone Loaded Topical Nanoemulgel for Wound Healing: Formulation Design and In-Vivo Evaluation

Thymoquinone is a natural bioactive with significant therapeutic activity against multiple ailments including wound healing. The poor aqueous solubility and low skin permeability limit its therapeutic efficacy. The present investigation aimed to improve the biopharmaceutical attributes of thymoquinone to enhance its topical efficacy in wound healing. A nanoemulsion-based hydrogel system was designed and characterized as a nanotechnology-mediated drug delivery approach to improve the therapeutic efficacy of thymoquinone, utilizing a high-energy emulsification technique. The black seed oil, as a natural home of thymoquinone, was utilized to improve the drug loading capacity of the developed nanoemulsion system and reduced the oil droplet size to <100 nm through ultrasonication. The influence of formulation composition, and the ultrasonication process conditions, were investigated on the mean globule size and polydispersity index of the generated nanoemulsion. Irrespective of surfactant/co-surfactant ratio and % concentration of surfactant/co-surfactant mixture, the ultrasonication time had a significant (p < 0.05) influence on the mean droplet size and polydispersity index of the generated nanoemulsion. The developed nanoemulgel system of thymoquinone demonstrated the pseudoplastic behavior with thixotropic properties, and this behavior is desirable for topical application. The nanoemulgel system of thymoquinone exhibited significant enhancement (p < 0.05) in skin penetrability and deposition characteristics after topical administration compared to the conventional hydrogel system. The developed nanoemulgel system of thymoquinone exhibited quicker and early healing in wounded Wistar rats compared to the conventional hydrogel of thymoquinone, while showing comparable healing efficacy with respect to marketed silver sulfadiazine (1%) cream. Furthermore, histopathology analysis of animals treated with a developed formulation system demonstrated the formation of the thick epidermal layer, papillary dermis along with the presence of extensive and organized collagen fibers in newly healed tissues. The outcome of this investigation signifies that topical delivery of thymoquinone through nanoemulgel system is a promising candidate which accelerates the process of wound healing in preclinical study.     

Oregano and Thyme Essential Oils Encapsulated in Chitosan Nanoparticles as Effective Antimicrobial Agents against Foodborne Pathogens

The use of natural compounds with biocidal activity to fight the growth of bacteria responsible for foodborne illness is one of the main research challenges in the food sector. This study reports the preparation and physicochemical characterization of chitosan nanoparticles loaded with Thymus capitatus (Th-CNPs) and Origanum vulgare (Or-CNPs) essential oils. The nanosystems were obtained by ionotropic gelation technique with high encapsulation efficiency (80–83%) and loading capacity (26–27%). Nanoparticles showed a spherical shape, bimodal particle size distribution, and good stability (zeta potential values > 40 mV). The treatment of the nanosuspensions at different temperatures (4 and 40 °C) and storage times (7, 15, 21, and 30 days) did not affect their physicochemical parameters and highlights their reservoir ability for essential oils also under stressful conditions. Both Or-CNPs and Th-CNPs exhibited an enhanced bactericidal activity against foodborne pathogens (S. aureus, E. coli, L. monocytogenes) than pure essential oils. These ecofriendly nanosystems could represent a valid alternative to synthetic preservatives and be of interest for health and food safety.     

Nanoparticles prepared by self-assembly of Chitosan and poly-γ-glutamic acid

The present paper describes the preparation and characterization of novel biodegradable nanoparticles based on self-assembly of poly-gamma-glutamic acid (γ-PGA) and chitosan (CH). The nanosystems were stable in aqueous media at low pH conditions. Solubility of the systems was determined by turbidity measurements. Surface charge and mobility were measured electrophoretically. The particle size and the size distribution of the polyelectrolyte complexes were identified by dynamic light scattering and transmission electron microscopy (TEM). It was found that the size and size distribution of the nanosystems depends on the concentrations of γ-PGA and CH solutions and their ratio as well as on the pH of the mixture and the order of addition. The diameter of individual particles was in the range of 20–285 nm measured by TEM, and the average hydrodynamic diameters were between 150 and 330 nm. These biodegradable, self-assembling stable nanocomplexes might be useful for several biomedical applications.     

Whey Proteins as a Potential Co-Surfactant with Aesculus hippocastanum L. as a Stabilizer in Nanoemulsions Derived from Hempseed Oil

The use of natural surfactants including plant extracts, plant hydrocolloids and proteins in nanoemulsion systems has received commercial interest due to demonstrated safety of use and potential health benefits of plant products. In this study, a whey protein isolate (WPI) from a byproduct of cheese production was used to stabilize a nanoemulsion formulation that contained hempseed oil and the Aesculus hippocastanum L. extract (AHE). A Box–Behnken experimental design was used to set the formulation criteria and the optimal nanoemulsion conditions, used subsequently in follow-up experiments that measured specifically emulsion droplet size distribution, stability tests and visual quality. Regression analysis showed that the concentration of HSO and the interaction between HSO and the WPI were the most significant factors affecting the emulsion polydispersity index and droplet size (nm) (p < 0.05). Rheological tests, Fourier transform infrared spectroscopy (FTIR) analysis and L*a*b* color parameters were also taken to characterize the physicochemical properties of the emulsions. Emulsion systems with a higher concentration of the AHE had a potential metabolic activity up to 84% in a microbiological assay. It can be concluded from our results that the nanoemulsion system described herein is a safe and stable formulation with potential biological activity and health benefits that complement its use in the food industry.     

SAXS studies of the thermally-induced fusion of diblock copolymer spheres: formation of hybrid nanoparticles of intermediate size and shape

Dilute dispersions of poly(lauryl methacrylate)–poly(benzyl methacrylate) (PLMA–PBzMA) diblock copolymer spheres (a.k.a. micelles) of differing mean particle diameter were mixed and thermally annealed at 150 °C to produce spherical nanoparticles of intermediate size. The two initial dispersions were prepared via reversible addition–fragmentation chain transfer (RAFT) dispersion polymerization of benzyl methacrylate in n-dodecane at 90 °C. Systematic variation of the mean degree of polymerization of the core-forming PBzMA block enabled control over the mean particle diameter: small-angle X-ray scattering (SAXS) analysis indicated that PLMA₃₉–PBzMA₉₇ and PLMA₃₉–PBzMA₂₉₄ formed well-defined, non-interacting spheres at 25 °C with core diameters of 21 ± 2 nm and 48 ± 5 nm, respectively. When heated separately, both types of nanoparticles regained their original dimensions during a 25–150–25 °C thermal cycle. However, the cores of the smaller nanoparticles became appreciably solvated when annealed at 150 °C, whereas the larger nanoparticles remained virtually non-solvated at this temperature. Moreover, heating caused a significant reduction in mean aggregation number for the PLMA₃₉–PBzMA₉₇ nanoparticles, suggesting their partial dissociation at 150 °C. Binary mixtures of PLMA₃₉–PBzMA₉₇ and PLMA₃₉–PBzMA₂₉₄ nanoparticles were then studied over a wide range of compositions. For example, annealing a 1.0% w/w equivolume binary mixture led to the formation of a single population of spheres of intermediate mean diameter (36 ± 4 nm). Thus we hypothesize that the individual PLMA₃₉–PBzMA₉₇ chains interact with the larger PLMA₃₉–PBzMA₂₉₄ nanoparticles to form the hybrid nanoparticles. Time-resolved SAXS studies confirm that the evolution in copolymer morphology occurs on relatively short time scales (within 20 min at 150 °C) and involves weakly anisotropic intermediate species. Moreover, weakly anisotropic nanoparticles can be obtained as a final copolymer morphology over a restricted range of compositions (e.g. for PLMA₃₉–PBzMA₉₇ volume fractions of 0.20–0.35) when heating dilute dispersions of such binary nanoparticle mixtures up to 150 °C. A mechanism involving both chain expulsion/insertion and micelle fusion/fission is proposed to account for these unexpected observations.

Dilute dispersions of poly(lauryl methacrylate)-poly(benzyl methacrylate) diblock copolymer spheres of differing mean diameter are mixed and thermally annealed at 150 °C to produce either spherical or non-spherical nanoparticles of intermediate size.     

Formulation and molecular docking simulation study of luliconazole nanosuspension–based nanogel for transdermal drug delivery using modified polymer

The purpose of study was to formulate nanosuspension-based nanogel of luliconazole (LLZ) for transdermal delivery to enhance its skin retention and effectiveness using modified starch ester. Nanosuspensions show promising results with size of 369.1–745.4 nm having PDI 0.193–0.344 and zeta potential 22–45 mV. These nanosuspensions form micelles and hydrophobic core of it provides the reservoir for LLZ with better drug loading and binding interaction. Drug loading was confirmed by percent drug entrapment efficiency (PDEE) and PDI. Molecular docking simulation (MDS) provides detail insight of LLZ polymer complexation at hydrophobic cavity of micelles and revealed that there was binding between drug and polymer in aqueous milieu having interaction energy ranges from ?7.1 to ?6.0 kcal/mol. Nanosuspensions so made were incorporated into gel by using Carbopol 934 ® and tested for % drug content, spreadability, pH, and viscosity with ranges of 101.62–97.71, 28.94–34.38 (gcm/s), 6.91–7.21, and 4802.62–9461.83 (cp), respectively. Nanogel also evaluated for stability and skin permeation study using human cadaver skin (HCS). In vitro skin permeation study indicated that the amount of LLZ permeated through skin from nanogel (71.042–83.818 μgcm ?2) was higher than standard cream (70.085 μgcm ?2). Nanogel increased the accumulation of LLZ in HCS ~3 times than standard cream. The transdermal flux was greater for standard cream (123.79 μgcm ?2), whereas smaller for nanogel (50.394–82.743 μgcm ?2) due to skin retention. Nanosuspension-based gel are able to especially favor LLZ accumulation into skin, provide better drug loading, improve stability, and efficacy. Thus, targeting older antibiotics such as LLZ and formulating into nanosystem utilized to expand its usefulness to physicians to treat illnesses caused by resistant fungal strains.     

Development and characterization of nanocapsules comprising dodecyltrimethylammonium chloride and κ-carrageenan

The aim of this work was to develop and characterize a new type of nanocapsules. To this end, a nanoemulsion bearing an oily core (Miglyol 812) was obtained by spontaneous emulsification and stabilized by dodecyl-trimethylammonium chloride (DTAC), a commercial cationic surfactant; this nanoemulsion was coated with proportionally very small amounts of κ-carrageenan (at molar charge ratios of Z ≤ 0.0045) that interact predominantly by an electrostatic mechanism with the positively charged sites at the polar heads of DTAC at the nanoemulsion's surface to harness nanocapsules of average size ~250-330 nm and zeta potential (ζ) ranging from ~+80 to +7 mV. The potential application of the new type of developed nanosystems as drug delivery vehicles has yet to be investigated and fully realized.     

Surface chemistry of quantum-sized metal nanoparticles under light illumination

Size reduction of metal nanoparticles increases the exposure of metal surfaces significantly, favoring heterogeneous chemistry at the surface of the nanoparticles. The optical properties of metal nanoparticles, such as light absorption, also exhibit a strong dependence on their size. It is expected that there will be strong coupling of light absorption and surface chemistry when the metal nanoparticles are small enough. For instance, metal nanoparticles with sizes in the range of 2–10 nm exhibit both surface plasmon resonances, which can efficiently produce high-energy hot electrons near the surface of the nanoparticles under light illumination, and the Coulomb blockade effect, which favors electron transfer from the metal nanoparticles to the surface adsorbates. The synergy of efficient hot electron generation and electron transfer on the surface of small metal nanoparticles leads to double-faced effects: (i) surface (adsorption) chemistry influences optical absorption in the metal nanoparticles, and (ii) optical absorption in the metal nanoparticles promotes (or inhibits) surface adsorption and heterogeneous chemistry. This review article focuses on the discussion of typical quantum phenomena in metal nanoparticles of 2–10 nm in size, which are referred to as “quantum-sized metal nanoparticles”. Both theoretical and experimental examples and results are summarized to highlight the strong correlations between the optical absorption and surface chemistry for quantum-sized metal nanoparticles of various compositions. A comprehensive understanding of these correlations may shed light on achieving high-efficiency photocatalysis and photonics.

Size reduction of metal nanoparticles increases the exposure of metal surfaces significantly, favoring heterogeneous photochemistry at the surface of the nanoparticles.     

The Anti-Inflammatory Effect of a γ-Lactone Isolated from Ostrich Oil of Struthio camelus (Ratite) and Its Formulated Nano-Emulsion in Formalin-Induced Paw Edema

The ostrich oil of Struthio camelus (Ratite) found uses in folk medicine as an anti-inflammatory in eczema and contact dermatitis. The anti-inflammatory effect of a γ-lactone (5-hexyl-3H-furan-2-one) isolated from ostrich oil and its formulated nano-emulsion in formalin-induced paw edema was investigated in this study. Ostrich oil was saponified using a standard procedure; the aqueous residue was fractionated, purified, and characterized as γ-lactone (5-hexyl-3H-furan-2-one) through the interpretation of IR, NMR, and MS analyses. The γ-lactone was formulated as nano-emulsion using methylcellulose (MC) for oral solubilized form. The γ-lactone methylcellulose nanoparticles (γ-lactone-MC-NPs) were characterized for their size, shape, and encapsulation efficiency with a uniform size of 300 nm and 59.9% drug content. The γ-lactone was applied topically, while the formulated nanoparticles (NPs) were administered orally to rats. A non-steroidal anti-inflammatory drug (diclofenac gel) was used as a reference drug for topical use and ibuprofen suspension for oral administration. Edema was measured using the plethysmograph method. Both γ-lactone and γ-lactone-MC-NPs showed reduction of formalin-induced paw edema in rats and proved to be better than the reference drugs; diclofenac gel and ibuprofen emulsion. Histological examination of the skin tissue revealed increased skin thickness with subepidermal edema and mixed inflammatory cellular infiltration, which were significantly reduced by the γ-lactone compared to the positive control (p-value = 0.00013). Diuretic and toxicity studies of oral γ-lactone-MC-NPs were performed. No diuretic activity was observed. However, lethargy, drowsiness, and refusal to feeding observed may limit its oral administration.     

Cryochemical synthesis and antibacterial activity of a hybrid composition based on Ag nanoparticles and dioxidine

Hybrid nanocomposites based on an dioxidine antimicrobial substance modified with silver were produced by means of cryochemical synthesis. TEM, UV-absorption spectroscopy, X-ray diffraction, and surface analysis based on low-temperature argon adsorption showed the formation of hybrid nanosystems consisting of drug substance particles with a size of 50–300 nm including internal small Ag nanoparticles with a size of 2–40 nm. The obtained hybrid nanosystems showed higher antibacterial activity against E. coli 52, S. aureus 144, and M. cyaneum 98 than did the original dioxidine.     

Preparation and Characterization of Polymeric Nanocapsules Produced by in Situ Polymerization From Nanoemulsions Produced by Direct Emulsification

Polymeric nanoparticles constitute an important drug delivery system with controlled release profile. This article describes a new way to produce polymeric nanocapsules using a vegetable oil nanoemulsion as template. The process occurs in two steps: First, a nanoemulsion was obtained with a low-energy method based on phase inversion emulsification, using 2-ethylhexyl acrylate as lipophilic monomer. The in situ polymerization of the nanoemulsion droplets is induced by the addition of polymerization catalyzers. The mean size of the polymeric nanoparticles was evaluated by photon correlation spectroscopy and atomic force microscopy. Both techniques showed the formation of polymeric nanocapsules with a mean particle size less than 300 nm.     

A potential nanomedicine consisting of heparin-loaded polysaccharide nanocarriers for the treatment of asthma

A new nanomedicine consisting of chitosan/carboxymethyl-β-cyclodextrin loaded with unfractioned or low-molecular-weight heparin is described and its potential in asthma treatment is evaluated. The nanoparticles are prepared by ionotropic gelation showing a size that between 221 and 729 nm with a positive zeta potential. The drug association efficiency is higher than 70%. Developed nanosystems are stable in Hank's balanced salt solution at pH = 6.4, releasing the drug slowly. Ex vivo assays show that nanocarriers lead to an improvement of heparin preventing mast cell degranulation. These results agree with the effective cellular internalization of the fluorescently labeled nanocarriers, and suggest these nanomedicines as promising formulations for asthma treatment.     

Transitional properties of starch colloid with particle size reduction from micro- to nanometer

High-pressure homogenization was used to disperse starch particles in water and reduce the size from micro- to nanometer. The resultant starch colloids were characterized by particle morphology, mean size, size distribution, and zeta potential. Starch slurries were transformed from a mixture containing sediment, dispersion, and sol, to gel as a result of reduction of the particle size from 3–6 μm to 10–20 nm under a pressure of 207 MPa. Furthermore, this process led to the transition of fluid properties without affecting the crystal structure and thermal stability of starch granules. Viscosity of the colloids increased with an increased number of homogenization passes, accompanied by a decreased particle size, narrower particle size distribution (PSD), and an increased absolute zeta potential, indicating the formation of a suspension or stable gel composed of nanoparticles. Lognormal and two other mathematical functions were established to describe the PSDs and their relationship to the homogenization passes. Hence, an environmentally friendly means of producing starch-based nanoparticles or nanogels with high yields, and predictable size and viscosity properties was presented.     

Synthesis of Zinc Oxide Nanoparticles Using Rubus fairholmianus Root Extract and Their Activity against Pathogenic Bacteria

Recently, the biosynthesis of zinc oxide nanoparticles (ZnO NPs) from crude extracts and phytochemicals has attracted much attention. Green synthesis of NPs is cost-effective, eco-friendly, and is a promising alternative for chemical synthesis. This study involves ZnO NPs synthesis using Rubus fairholmianus root extract (RE) as an efficient reducing agent. The UV spectrum of RE-ZnO NPs exhibited a peak at 357 nm due to intrinsic bandgap absorption and an XRD pattern that matches the ZnO crystal structure (JCPDS card no: 36-1451). The average particle size calculated from the Debye–Scherrer equation is 11.34 nm. SEM analysis showed that the RE-ZnO NPs spherical in shape with clusters (1–100 nm). The antibacterial activity of the NPs was tested against Staphylococcus aureus using agar well diffusion, minimum inhibitory concentration, and bacterial growth assay. The R. fairholmianus phytochemicals facilitate the synthesis of stable ZnO NPs and showed antibacterial activity.     

Colloidal Synthesis and Characterization of Molybdenum Chalcogenide Quantum Dots Using a Two-Source Precursor Pathway for Photovoltaic Applications

The drawbacks of utilizing nonrenewable energy have quickened innovative work on practical sustainable power sources (photovoltaics) because of their provision of a better-preserved decent environment which is free from natural contamination and commotion. Herein, the synthesis, characterization, and application of Mo chalcogenide nanoparticles (NP) as alternative sources in the absorber layer of QDSSCs is discussed. The successful synthesis of the NP was confirmed as the results from the diffractive peaks obtained from XRD which were positive and agreed in comparison with the standard. The diffractive peaks were shown in the planes (100), (002), (100), and (105) for the MoS₂ nanoparticles; (002), (100), (103), and (110) for the MoSe₂ nanoparticles; and (0002), (0004), (103), as well as (0006) for the MoTe₂ nanoparticles. MoSe₂ presented the smallest size of the nanoparticles, followed by MoTe₂ and, lastly, by MoS₂. These results agreed with the results obtained using SEM analysis. For the optical properties of the nanoparticles, UV–Vis and PL were used. The shift of the peaks from the red shift (600 nm) to the blue shift (270–275 nm and 287–289 nm (UV–Vis)) confirmed that the nanoparticles were quantum-confined. The application of the MoX₂ NPs in QDSSCs was performed, with MoSe₂ presenting the greatest PCE of 7.86%, followed by MoTe₂ (6.93%) and, lastly, by MoS₂, with the PCE of 6.05%.     

Condensation route of evolution of nanodispersed substances

Numerous experimental data indicate that nanosystems develop by stages. The evolution route of closed nanosystems includes stages of nanoparticle nucleation, growth, ripening, and agglomeration, and texture and composition ordering. In closed systems, nanodispersed substances occur in the nano-state for a limited period of time, which can be changed by varying the supersaturation of the medium with respect to nanoparticles. Nanoparticles in open systems tend to degrade due to chemical transformations, dissolution, or evaporation and the lifetime of open systems can be estimated. At every stage of development of nanosystems, the rates of variation of the state parameters of nanoparticles fluctuate over a scale much exceeding the molecular scale. The behavior of the set of nanoparticles is described by a Fokker—Planck type equation, which may underlie the formulation of the principal equation of physicochemical evolution of nanosystem.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 17–31, January, 2005.     

Photoprotective nanoemulsions containing microbial carotenoids and buriti oil: Efficacy and safety study

Photoprotective nanoemulsions are able to attenuate skin damage from overexposure to the sun, thus avoiding the immediate effects caused by ultraviolet radiation. The global cosmetics market understands that there is a demand and greater acceptance by consumers for formulations containing natural products compatible with the skin. Consequently, there is an increasingly need to develop such products that are safe and effective. Furthermore, there is a growing interest in nanoemulsions (NE) in the pharmaceutical industry, due the versatility of incorporating lipophilic substances into cosmetic formulations. In the present work, oil-in-water photoprotective nanoemulsions containing microbial carotenoids, buriti oil and chemical filters were developed and characterized. The essential physical properties of the droplets, the transmission electronic microscopy (TEM), the sun protection factor (SPF) as well as the stability of the formulations were determined. In vitro phototoxicity was evaluated using Balb 3 T3 with relative cell viability estimated by Neutral Red Uptake, with the Photo Irritation Factor (PIF) and the Medium Photo Effect Factor (MPF) as the measurement parameters. Nanoemulsion 3 (NE3) showed spherical morphology with an average droplet size of 142.11 ± 0.92 nm and polydispersity index (PDI) of 0.198 ± 0.017. This nanoemulsion containing microbial carotenoids and buriti oil exhibited a SPF of 36 ± 1.5. Neutral Red Uptake revealed that the cells kept their viability even after irradiation and those nanoemulsions containing the microbial carotenoids and buriti oil were not phototoxic. The addition of microbial carotenoids and buriti oil in nanoemulsions was positive in increasing the mean SPF values compared to the control formulation.     

Preparation and characterization of cross-linked hyaluronan nanoparticles

The present investigation describes the synthesis and characterization of novel biodegradable nanoparticles based on hyaluronic acid (HA). The diamine, 2,2′(ethylenedioxy)bis(ethylamine) was used for cross-linking of the HA linear chains. The condensation reaction of amino groups and pendant carboxyl groups of HA was performed in aqueous media at room temperature using water-soluble carbodiimide. The prepared nanosystems, aqueous solutions, or dispersions of nanoparticles were stable, transparent, or mildly opalescent systems depending on the ratio of cross-linking, findings consistent with values of transmittance above 77%. The structure of products was determined by nuclear magnetic resonance spectroscopy, and the particle size was identified by laser light scattering (DLS) and transmission electron microscopy (TEM) measurements. Particle size measured by TEM varied less than 130 nm; in the swollen state, the average size of the particles measured by DLS was in the range of 30–140 nm depending on the ratio of cross-linking and the molecular weight of HA. Formation of cross-linked nanoparticles results in a viscosity drop compared to the viscosity of the corresponding solution of the HA, and this trend becomes decreasingly appreciable as the molecular weight of HA decreases.     

Biogenic Silver Nanoparticles from Iris tuberosa as Potential Preservative in Cosmetic Products

Biogenic-silver nanoparticles emerge as new nanosilver platforms that allow us to obtain silver nanoparticles via “green chemistry”. In our study, biogenic-silver nanoparticles were obtained from Iris tuberosa leaf extract. Nanoparticles were characterized by a UV-vis spectroscopy, dynamical light scattering technique. The transmission electron microscope revealed spheric and irregular nanoparticles with 5 to 50 nm in diameter. Antimicrobial properties were evaluated against typical microbial contaminants found in cosmetic products, showing high antimicrobial properties. Furthermore, natural moisturizing cream was formulated with biogenic-silver nanoparticles to evaluate the preservative efficiency through a challenge test, indicating its promising use as preservative in cosmetics.