Theoretical investigations of structural, elastic and thermodynamic properties for PtN2 under high pressure

We have investigated structural and elastic properties of PtN₂ under high pressures using norm-conserving pseudopotentials within the local density approximation (LDA) in the frame of density-functional theory. Calculated results of PtN₂ are in agreement with experimental and available theoretical values. The a/a₀, V/V₀, ductility/brittleness, elastic constants C_ij, shear modulus C′, bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio σ and anisotropy factor A as a function of applied pressure are presented. Through the quasi-harmonic Debye model, we also study thermodynamic properties of PtN₂. The thermal expansion versus temperature and pressure, thermodynamic parameters X (X=Debye temperature or specific heat) with varying pressure P, and heat capacity of PtN₂ at various pressures and temperatures are estimated.     

冲击压缩下铝、铜、钨的剪切模量和屈服强度与压力和温度的相关性

对铝、铜和钨在冲击压缩状态下的剪切模量和屈服强度的实验数据进行了综合分析，并与St einberg-Cochran-Guinan(SCG)模型的计算结果进行了比较，结果表明，铝在50 GPa、铜在1 00 GPa、钨在200 GPa冲击压力以内，三种材料的剪切模量和屈服强度随温度和压力的变化 趋势基本相似，即SCG模型的假设Y′_pY₀=G′_pG ₀,Y′_TY₀=G′_TG₀对这三种材料在上述冲击压力范围内近似成立，利用该模型可以较好地描述材料在冲击压缩 下的本构行为. 关键词： 剪切模量 屈服强度 压力 温度     

Isothermal equation of state for the skutterudites CoSb3 and LaFe3CoSb12

The thermoelectric materials CoSb₃ and LaFe₃CoSb₁₂ with skutterudite structure were subjected to high pressures using a diamond anvil high-pressure cell up to 20 GPa. Energy-dispersive X-ray diffraction was used to determine the dependence of the lattice parameter on pressure. No major change in the X-ray diffraction spectra was observed for both compounds, constituting evidence that both compounds are stable within this pressure range, despite their relatively open structures. Three distinct isothermal equations of state for solids under high pressure were fitted to the experimental data to determine the bulk modulus for both compounds. The filled skutterudite showed a greater compressibility than the unfilled one, this difference can be understood in terms of the larger lattice parameter of the former.     

Theoretical study of the structural phase transition and elastic properties of HfN under high pressures

The effect of hydrostatic pressure on the structures of HfN at 0 K was investigated by using the projector augmented wave (PAW) within the Perdew–Burke–Ernzerhof (PBE) form of the generalized gradient approximation (GGA). The transition pressure between NaCl (B1) and CsCl (B2) structures is predicted to be 277.3 GPa. This value is consistent with that reported by Kroll, while in contrast to the results obtained by Ojha et al. and Meenaatci et al. Moreover, the elastic properties of B1-HfN and B2-HfN under high pressures are successfully obtained. It is found that the elastic constants, bulk modulus B, shear modulus G, compressional and shear wave velocities increase monotonically with increasing pressure. The Debye temperature Θ calculated from the elastic constants of HfN is in good agreement with the experimental values. The anisotropies of B1-HfN and B2-HfN at zero pressure have also been discussed.     

Structural and elastic properties under pressure effect of the cubic antiperovskite compounds ANCa3 (A = P, As, Sb, and Bi)

Using first-principles density functional calculations, the effect of high pressures, up to 40 GPa, on the structural and elastic properties of ANCa₃, with A = P, As, Sb, and Bi, were studied by means of the pseudo-potential plane-waves method. Calculations were performed within the local density approximation and the generalized gradient approximation for exchange-correlation effects. The lattice constants are in good agreement with the available results. The elastic constants and their pressure dependence are calculated using the static finite strain technique. We derived the bulk and shear moduli, Young's modulus, Poisson's ratio and Lamé's constants for ideal polycrystalline ANCa₃ aggregates. By analysing the ratio between the bulk and shear moduli, we conclude that ANCa₃ compounds are brittle in nature. We estimated the Debye temperature of ANCa₃ from the average sound velocity. This is the first quantitative theoretical prediction of the elastic properties of PNCa₃, AsNCa₃, SbNCa₃, and BiNCa₃ compounds, and it still awaits experimental confirmation.     

Simulated equation of state of CaF2 with fluorite-type structure at high temperature and high pressure

The pressure-volume-temperature (P-V-T) equation of state (EOS), isothermal bulk modulus, and thermal expansivity of CaF₂ with cubic fluorite-type structure are investigated using the constant temperature and pressure shell model molecular dynamics (MD) method with effective pair potentials which consist of the Coulomb, dispersion, and repulsion interaction. It was shown that MD simulation is very successful in accurately reproducing the measured volumes of the CaF₂ over a wide range of pressures. The simulated P-V data matched X-ray diffraction experimental results up to 9.5 GPa at 300 K. In addition, volume thermal-expansion coefficient and isothermal bulk modulus were also calculated and compared with available experimental data and the latest theoretical results at ambient condition. At extended temperature and pressure ranges, The P-V EOS under different isotherms at selected temperatures, T-V EOS under different isobars at selected pressures, thermal expansivity, and isothermal bulk modulus were predicted up to 1500 K and 10 GPa. The detailed knowledge of thermodynamic behavior and EOS at extreme conditions are of fundamental importance to the understanding of the physical properties of CaF₂.     

高压下Ti_2AlX(X=C,N)的结构、力学性能及热力学性质

采用基于密度泛函理论的第一性原理方法,计算研究了压力对Ti_2AlC与Ti_2AlN结构、力学性能的影响.研究发现压力的增大会使体系的体积比降低,Ti_2AlC压缩性较Ti_2AlN好.力学性能研究发现,压力的增大使材料抵抗变形能力增强,体系的延展性有了很大的提升,当压力超过40 GPa后,Ti_2AlC与Ti_2AlN从脆性材料转变为延性材料,体模量与剪切模量的比值达到1.75,延展性有了很大的提升.通过准谐德拜模型,分析了压力与温度对Ti_2AlC与Ti_2AlN体模量、热容及热膨胀系数的影响.结果表明,随着温度的升高,Ti_2AlN与Ti_2AlC的体模量下降.定容热容与定压热容的变化趋势相同,但在高温下,定容热容遵循Dulong-Petit极限,温度对热容的影响效果较压力明显.温度与压力对Ti_2AlN与Ti_2AlC线膨胀系数的影响主要发生在低温区域.     

Structural and elastic properties of TiN under high pressure

We have investigated the structural and elastic properties of TiN at high pressures by the first-principles plane wave pseudopotential density functional theory method at applied pressures up to 45.4 GPa. The obtained normalized volume dependence of the resulting pressure is in excellent agreement with the experimental data investigated using synchrotron radial x-ray diffraction (RXRD) under nonhydrostatic compression up to 45.4 GPa in a diamond-anvil cell. Three independent elastic constants at zero pressure and high pressure are calculated. From the obtained elastic constants, the bulk modulus, Young's modulus, shear modulus, acoustic velocity and Debye temperature as a function of the applied pressure are also successfully obtained.     

First-Principles Calculations of Elastic Properties of Cubic Ni2MnGa

Dependence of bulk modulus on both pressure and temperature, the elastic constants Cij and the pressure and temperature dependence of normalized volume V/Vo of cubic Ni2MnGa alloy are successfully obtained using the first-principles plane-wave pseudopotential （PW-PP） method as well as the quasi-harmonic Debye model. We analyse the relationship between bulk modulus and temperature up to 800 K and obtain the relationships between bulk modulus B and pressures at different temperatures. It is found that the bulk modulus B increases monotonically with increasing pressure. Moreover, the temperature dependences of the Debye temperature are also analysed. The calculated results are in agreement with the available experimental data and the previous theoreticM results.     

Phase transition,structural, mechanical and thermal properties of erbium pnictides under pressure

In this article, we have investigated the high-pressure structural phase transition of erbium pnictides (ErX; X?=?N, P and As). An extended interaction potential model has been developed (including the zero-point energy effect in three-body interaction potential model). Phase transition pressures are associated with a sudden collapse in volume. The phase transition pressures and associated volume collapses have been predicted successfully. The elastic constants, their combinations and pressure derivatives are also reported. The pressure behaviour of elastic constants, bulk modulus and shear modulus have been presented and discussed. Moreover, the thermophysical properties such as molecular force constant (f), infrared absorption frequency (υ ₀), Debye temperature (θ _D) and Grunneisen parameter (γ) have also been predicted.     

Thermodynamic,elastic, elastic anisotropy and minimum thermal conductivity of β-GaN under high temperature

The thermodynamic, elastic, elastic anisotropy and minimum thermal conductivity of β-GaN are investigated at ambient pressure and high temperature by using first-principles calculations method with the ultrasoft psedopotential scheme. The elastic constants calculations reveal β-GaN is mechanically stability at ambient pressure and high temperature. The elastic modulus (Poisson's ratio, shear modulus and Young's modulus) decreases with increasing temperature. The calculations of anisotropy show that β-GaN has a larger elastic anisotropy in Poisson's ratio, shear modulus, Young's modulus and Zener anisotropy index. In addition, when the temperature increases from 0 to 1500 K, the elastic anisotropy decreases for β-GaN. The quasi-harmonic Debye model is successfully applied to determine the thermodynamic properties at different pressures and temperatures. Using the quasi-harmonic Debye model, the thermodynamic properties including the Debye temperature, Grüneisen parameter, the heat capacity, adiabatic bulk modulus, and the thermal expansion coefficients of β-GaN are predicted under high temperature and high pressure.     

High-pressure radial X-ray diffraction study of osmium to 58 GPa

Nonhydrostatic compression behavior of osmium (Os) was investigated up to 58.2 GPa using radial X-ray diffraction (RXRD) together with lattice strain theory in a diamond-anvil cell. The apparent bulk modulus of Os derived from RXRD data varies from 262 GPa to 413 GPa, depending on Ψ, the orientation of the diffraction planes with respect to the loading axis. Fitting to the third-order Birch-Murnaghan equation of state, the RXRD data obtained at Ψ = 54.7° yields a bulk modulus K₀ = 390 ± 6 GPa with pressure derivative K^′ ₀ fixed at 4. The ratio of differential stress to shear modulus t/G ranges from 0.024 to 0.029 at the pressures of 15.7–58.2 GPa. The yield strength was observed to increase with compression and reach the value of 11.7 GPa at the highest pressure. This confirms that Os is the strongest known pure metallic material compared with the reported stiff elemental metals such as W, Mo and Re. It was found that the apparent c/a ratio changed with the nonhydrostatic compression, as well as the orientation Ψ in our experiments. Moreover, the aggregate moduli of Os at high pressure were determined from the RXRD measurements.     

密度泛函理论研究高温高压下UO2弹性与热力学性能

采用第一性原理与准谐德拜模型研究UO2在高温高压条件下的弹性与热力学性能。UO2在高温高压下仍属离子型晶体,并且弹性性能计算表明,四角方向剪切常数在高温与高压下均保持稳定。高温下弹性常数C44没有明显变化,而高压下C44迅速增大。体积模量、剪切模量与杨氏模量均随压强增加而增大;高温条件下,体积模量、剪切模量与杨氏模量也未出现明显的降低,表明UO2在高温度高压下均可保持良好的力学性能。不同压强下,UO2定容热容均随温度迅速增大,并在1000 K 附近趋近于杜隆-佩蒂特极限。德拜温度则随温度降低,随压强升高。在低于室温条件下,热膨胀系数随温度急剧增加;温度继续增加,系数的增加趋势则逐渐变缓。计算结果还表明,UO2的热膨胀系数在相同条件下,远小于其他核材料。     

Molecular dynamics simulation of P-V-T relationship of ZnO with rock-salt structure using pair-wise interactions

Molecular dynamics (MD) method is used to investigate the behavior of the pressure-volume-temperature (P-V-T) relationship, lattice constant and thermal expansivity for ZnO with rock-salt structure at high pressures and temperatures. The interionic potential is taken to be the sum of pair-wise additive Coulomb, van der Waals attraction, and repulsive interactions. The isothermal and isobaric properties are discussed from the corresponding P-V-T relationship, and it is shown that the MD simulation is successful in reproducing the measured volumes of ZnO over a wide range of temperature and pressure. Meanwhile, the equations of state parameters including lattice constant, linear thermal expansion coefficient, and isothermal bulk modulus are calculated and compared with the available experimental data and the latest theoretical results. At an extended pressure and temperature range, P-V-T relationship, lattice constant, and linear thermal expansion coefficient have been predicted. The structural and thermodynamic properties of ZnO with rock-salt structure are summarized in the pressure 0-100 GPa ranges and the temperature up to 3100 K.     

Structural, high pressure and elastic properties of transition metal monocarbides: A FP-LAPW study

The structural, elastic and thermal properties of four transition metal monocarbides ScC, YC (group III), VC and NbC (group V) have been investigated using full potential linearized augmented plane wave (FP-LAPW) method within generalized gradient approximation (GGA) both at ambient and high pressure. We predict a B₁ to B₂ structural phase transition at 127.8 and 80.4 GPa for ScC and YC along with the volume collapse percentage of 7.6 and 8.4%, respectively. No phase transition is observed in case of VC and NbC up to pressure 400 and 360 GPa, respectively. The ground state properties such as equilibrium lattice constant (a₀), bulk modulus (B) and its pressure derivative (B′) are determined and compared with available data. We have computed the elastic moduli and Debye temperature and report their variation as a function of pressure.     

Kinetics of slow collapse process: Thermodynamic description of rate constants

Insoluble monolayer formed at the air/water interface compressed at a surface pressure above the equilibrium spreading pressure is unstable. In presented paper the classical theory for homogeneous nucleation is modified adding the activation energy term. It allows quantitative thermodynamic interpretation of the slow collapse phase transformation. The collapse of stearic acid Langmuir films has been carried out by systematic measurements of the area loss-time isobaric dependencies at various temperatures and isothermal dependencies at various pressures. Activation energies (activation enthalpies) and activation entropies have been evaluated for the nucleation (E_α = 1.32 eV) and the growth (E_β = 1.55 eV) processes. The experimental data for various pressures are discussed on the basis of the Gibbs energy analysis.     

High frequency shear ultrasonic properties of water/sorbitol solutions

Dynamic viscoelastic properties (G′ and G′′), ultrasonic shear velocity and attenuation were measured for aqueous solutions of sorbitol at 5 MHz. For pure sorbitol, the shear ultrasonic velocity reached 1470 m s⁻¹ with a density of 1500 kg m⁻³, consequently leading to a high acoustical impedance compared with “classical” polymers (polystyrene, nylon, polyethylene, Teflon, etc.). We demonstrate that this surprisingly high shear ultrasonic velocity for a viscoelastic material was due to the fact that the glass transition begins at a concentration above 85% of sorbitol in water. Hence, pure sorbitol is an ideal coupling material for high frequency shear experiments.     

Charge transport near pressure-induced antiferromagnetic quantum critical point in Magnéli-phase vanadium oxides

Resistivity (ρ) measurements on Magnéli phases V₇O₁₃ and V₈O₁₅ were performed under high pressures up to 3.5GPa. We have achieved a pressure-induced transition from an antiferromagnetic metal to a paramagnetic metal (PM) at critical pressures P_c≈3.4 and 3.3 GPa for V₇O₁₃ and V₈O₁₅, respectively. The critical behavior of ρ(T) near P_c turned out to be quite unusual in that no noticeable precursor effect was observed. This strongly contrasts with the canonical quantum critical point behavior observed in chemically modified systems such as Ni(S,Se)₂ and V₂O₃. We propose that the presence of two distinct Fermi surface segments is responsible for the observed unusual behaviors.     

Estimation of melting critical point parameters

Melting is considered using a model of the equation of state proposed for the nonrelativistic range. A critical point in the melting curve calculated for copper is found. Based on an approximate expression for the shear modulus, the pressure at the critical point is estimated for most elements. It is shown that this pressure falls into the range 1 Mbar-1 Gbar, being much lower for readily compressible elements, helium, and alkaline metals (for them, P ∼ 1 Mbar). The possibility of existence and finding of the critical point is discussed.