Stable and efficient silver substrates for SERS spectroscopy

Silver substrates have been obtained, by depositing silver colloidal nanoparticles on a roughened silver plate treated with 1,10-phenanthroline, and checked by means of AFM microscopy and Raman spectroscopy. The ligand molecules are located between two silver substrates and undergo the SERS (Surface Enhanced Raman Scattering) enhancement of both the roughened silver plate and the silver colloidal layer deposited on it. These SERS-active substrates, which show the advantages of being stable with respect to the metal colloidal suspensions, along with an easy and reproducible preparation, can be very useful for catalytic and analytical applications of the SERS spectroscopy.     

Surface-enhanced Raman scattering: realization of localized surface plasmon resonance using unique substrates and methods

Surface-enhanced Raman scattering (SERS) enhancement and the reproducibility of the SERS signal strongly reflect the quality and nature of the SERS substrates because of diverse localized surface plasmon resonance (LSPR) excitations excited at interstitials or sharp edges. LSPR excitations are the most important ingredients for achieving huge enhancements in the SERS process. In this report, we introduce several gold and silver nanoparticle-based SERS-active substrates developed solely by us and use these substrates to investigate the influence of LSPR excitations on SERS. SERS-active gold substrates were fabricated by immobilizing colloidal gold nanoparticles on glass slides without using any surfactants or electrolytes, whereas most of the SERS-active substrates that use colloidal gold/silver nanoparticles are not free of surfactant. Isolated aggregates, chain-like elongated aggregates and two-dimensional (2D) nanostructures were found to consist mostly of monolayers rather than agglomerations. With reference to correlated LSPR and SERS, combined experiments were carried out on a single platform at the same spatial position. The isolated aggregates mostly show a broadened and shifted SPR peak, whereas a weak blue-shifted peak is observed near 430 nm in addition to broadened peaks centered at 635 and 720 nm in the red spectral region in the chain-like elongated aggregates. In the case of 2D nanostructures, several SPR peaks are observed in diverse frequency regions. The characteristics of LSPR and SERS for the same gold nanoaggregates lead to a good correlation between SPR and SERS images. The elongated gold nanostructures show a higher enhancement of the Raman signal than the the isolated and 2D samples. In the case of SERS-active silver substrates for protein detection, a new approach has been adopted, in contrast to the conventional fabrication method. Colloidal silver nanoparticles are immobilized on the protein functionalized glass slides, and further SERS measurements are carried out based on LSPR excitations. A new strategy for the detection of biomolecules, particularly glutathione, under aqueous conditions is proposed. Finally, supramolecular J-aggregates of ionic dyes incorporated with silver colloidal aggregates are characterized by SERS measurements and correlated to finite-difference time-domain analysis with reference to LSPR excitations. Figure SPR and SERS images for isolated, elongated and two-dimensional gold nanostructures     

Silica-void-gold nanoparticles: temporally stable surface-enhanced Raman scattering substrates

Reproducible detection of a target molecule is demonstrated using temporally stable solution-phase silica-void-gold nanoparticles and surface-enhanced Raman scattering (SERS). These composite nanostructures are homogeneous (diameter = 45 +/- 4 nm) and entrap single 13 nm gold nanoparticle cores inside porous silica membranes which prevent electromagnetic coupling and aggregation between adjacent nanoparticles. The optical properties of the gold nanoparticle cores and structural changes of the composite nanostructures are characterized using extinction spectroscopy and transmission electron microscopy, respectively, and both techniques are used to monitor the formation of the silica membrane. The resulting nanostructures exhibit temporally stable optical properties in the presence of salt and 2-naphthalenethiol. Similar SERS spectral features are observed when 2-naphthalenethiol is incubated with both bare and membrane-encapsulated gold nanoparticles. Disappearance of the S-H Raman vibrational band centered at 2566 cm(-1) with the composite nanoparticles indicates that the target molecule is binding directly to the metal surface. Furthermore, these nanostructures exhibit reproducible SERS signals for at least a 2 h period. This first demonstration of utilizing solution-phase silica-void-gold nanoparticles as reproducible SERS substrates will allow for future fundamental studies in understanding the mechanisms of SERS using solution-phase nanostructures as well as for applications that involve the direct and reproducible detection of biological and environmental molecules.     

Silver Coated Platinum Core–Shell Nanostructures on Etched Si Nanowires: Atomic Layer Deposition (ALD) Processing and Application in SERS

A new method to prepare plasmonically active noble metal nanostructures on large surface area silicon nanowires (SiNWs) mediated by atomic layer deposition (ALD) technology has successfully been demonstrated for applications of surface‐enhanced Raman spectroscopy (SERS)‐based sensing. As host material for the plasmonically active nanostructures we use dense single‐crystalline SiNWs with diameters of less than 100 nm as obtained by a wet chemical etching method based on silver nitrate and hydrofluoric acid solutions. The SERS active metal nanoparticles/islands are made from silver (Ag) shells as deposited by autometallography on the core nanoislands made from platinum (Pt) that can easily be deposited by ALD in the form of nanoislands covering the SiNW surfaces in a controlled way. The density of the plasmonically inactive Pt islands as well as the thickness of noble metal Ag shell are two key factors determining the magnitude of the SERS signal enhancement and sensitivity of detection. The optimized Ag coated Pt islands on SiNWs exhibit great potential for ultrasensitive molecular sensing in terms of high SERS signal enhancement ability, good stability and reproducibility. The plasmonic activity of the core‐shell Pt//Ag system that will be experimentally realized in this paper as an example was demonstrated in numerical finite element simulations as well as experimentally in Raman measurements of SERS activity of a highly diluted model dye molecule. The morphology and structure of the core‐shell Pt//Ag nanoparticles on SiNW surfaces were investigated by scanning‐ and transmission electron microscopy. Optimized core–shell nanoparticle geometries for maximum Raman signal enhancement is discussed essentially based on the finite element modeling.     

Surface-enhanced Raman scattering substrates fabricated using electroless plating on polymer-templated nanostructures

Surface-enhanced Raman scattering (SERS) has great potential as an analytical technique based on the unique molecular signatures presented even by structurally similar analyte species and the minimal interference of scattering from water when sampling in aqueous environments. Unfortunately, analytical SERS applications have been restricted on the basis of limitations in substrate design. Herein, we present a simple SERS substrate that exploits electroless deposition onto a nanoparticle-seeded polymer scaffold that can be fabricated quickly and without specialized equipment. The polymer-templated nanostructures have stable enhancement factors that are comparable to the traditional silver film over nanospheres (AgFON) substrate, broad localized surface plasmon resonance spectra that allow various Raman excitation wavelengths to be utilized, and tolerance for both aqueous and organic environments, even after 5 day exposure. These polymer-templated nanostructures have an advantage over the AgFON substrate based on the ease of fabrication; specifically, the ability to generate fresh SERS substrates outside the laboratory environment will facilitate the application of SERS to new analytical spectroscopy applications.     

Probing Surface Enhancement Effect of Molecules On/Between Silver Nanoparticles in Surface Enhanced Raman Scattering

To explore the mechanisms in Surface‐enhanced Raman Scattering (SERS) measurements, silver nanoparticles (AgNPs) were first prepared by a silver mirror reaction to form different particle sizes and different distributions on glass substrates. After the resulting surfaces were probed with molecules of p‐Amino‐thiophenol (pATP), p‐Nitrothiophenol (pNTP), and p‐Mercaptobenzoic acid (pMBA) individually, the substrates were placed into reaction solutions to grow additional AgNPs. In this way, probe molecules could be trapped between two nanoparticles, possibly having the so‐called “hot spot” effect. To examine the variations of morphologies of AgNPs in each of the steps, the substrates were examined by field‐emission scanning electron microscope (FE‐SEM). The morphologies also were correlated with the SERS signals. Two bands in the SERS spectra of probe molecules were selected as indications of the enhancements from electromagnetic (EM) effect and charge‐transfer (CT). Results indicate that the SERS signals from the EM effect were increased ca. 5 times after growing additional AgNPs on the molecule‐modified AgNPs substrates. The SERS signals from CT effect were increased two orders of magnitude after growing additional AgNPs. The increase of enhancement for molecules between AgNPs was caused mostly by CT effect. Based on the effect of particle size and distribution of the AgNPs, the EM effect was strongly influenced by the particle size of the AgNPs, while the CT effect was less sensitive to the variation of the morphologies of the AgNPs.     

Long‐Term Stable Silver Subsurface Ion‐Exchanged Glasses for SERS Applications

We report on the formation of silver subsurface ion‐exchanged metal oxide (silver SIMO) glasses and their surface‐enhanced Raman scattering (SERS) activity. The samples were prepared by a combined thermal and chemical three‐step methodology and characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), environmental electron scanning microscopy (ESEM), and UV/Vis spectroscopy. This unique method provides SERS substrates with protection against contamination and strong, reliable and reproducible SERS enhancement. The Raman enhancement factors of the long‐term stable SIMO glasses were estimated to approximately 10⁷.     

Frequency Shift in Graphene‐Enhanced Raman Signal of Molecules

Graphene‐enhanced Raman scattering (GERS) is emerging as an important method due to the need for highly reproducible, quantifiable, and biocompatible active substrates. As a result of its unique two‐dimensional carbon structure, graphene provides particularly large enhanced Raman signals for molecules adsorbed on its surface. In this work, the GERS signals of a test molecule, 4‐mercaptobenzoic acid (4‐MBA), with reproducible enhancement factors are discussed and compared with surface‐enhanced Raman scattering (SERS) signals from highly active substrates, covered with spherical silver nanoparticles. It is shown that chemical interactions between the molecule and graphene can result in a frequency shift in the graphene‐enhanced Raman signal of the molecule.     

ZnGa2O4 Nanorod Arrays Decorated with Ag Nanoparticles as Surface‐Enhanced Raman‐Scattering Substrates for Melamine Detection

The availability of sensitive, reproducible, and stable substrates is critically important for surface‐enhanced Raman spectroscopy (SERS)‐based applications, but it presently remains a challenge. In this work, well‐aligned zinc gallate (ZnGa₂O₄) nanorod arrays grown on a Si substrate by chemical vapor deposition were used as templates to fabricate SERS substrates by deposition of Ag nanoparticles onto the ZnGa₂O₄ nanorod surfaces. The coverage of the Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces was easily controlled by varying the amount of AgNO₃. SERS measurements showed that the number density of Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces had a great effect on SERS activity. The SERS signals collected by point‐to‐point and SERS mapping images showed that as‐prepared SERS substrates exhibited good spatial uniformity and reproducibility. Detection of melamine molecules at low concentrations (1.0×10^?7 M ) was used as an example to show the possible application of such a substrate. In addition, the effect of benzoic acid on the detection of melamine was also investigated. It was found that the SERS signal intensity of melamine decreased greatly as the concentration of benzoic acid was increased.     

Temperature-assisted ionic liquid dispersive liquid-liquid microextraction combined with high performance liquid chromatography for the determination of PCBs and PBDEs in water and urine samples

We report on silver–gold core-shell nanostructures that contain Methylene Blue (MB) at the gold–silver interface. They can be used as reporter molecules in surface-enhanced Raman scattering (SERS) labels. The labels are stable and have strong SERS activity. TEM imaging revealed that these nanoparticles display bright and dark stripe structures. In addition, these labels can act as probes that can be detected and imaged through the specific Raman signatures of the reporters. We show that such SERS probes can identify cellular structures due to enhanced Raman spectra of intrinsic cellular molecules measured in the local optical fields of the core-shell nanostructures. They also provide structural information on the cellular environment as demonstrated for these nanoparticles as new SERS-active and biocompatible substrates for imaging of live cells.

Facile fabrication of silver nanoparticles on silicon for surface‐enhanced infrared and Raman analysis

A facile and economic method to fabricate and immobilize silver nanoparticles on a thin Si wafer (AgNP/Si) is reported for an analytical template in ambient environment by surface‐enhanced infrared/Raman spectroscopy. The protocol involves immersion of the Si wafer in a solution containing silver nitrate and hydrofluoric acid. To screen appropriate conditions for preparing AgNP/Si for SEIRAS application, different combinations of AgNO₃ and HF solutions were examined with paranitrobenzoic acid (PNBA) used as the probe molecule in transmission measurements. These SEIRA‐active substrates were also promising for SERS application, as demonstrated with high quality SERS spectra of iron (III) protoporphyrin adlayer on AgNP/Si with a red excitation line. The AgNP/Si substrates prepared under different conditions were examined by SEM for qualitative correlation of enhancements with morphologies. Copyright © 2008 John Wiley & Sons, Ltd.     

Noble‐Metal‐Free Materials for Surface‐Enhanced Raman Spectroscopy Detection

Surface‐enhanced Raman spectroscopy (SERS) is an attractive tool for the sensing of molecules in the fields of chemical and biochemical analysis as it enables the sensitive detection of molecular fingerprint information even at the single‐molecule level. In addition to traditional coinage metals in SERS analysis, recent research on noble‐metal‐free materials has also yielded highly sensitive SERS activity. This Minireview presents the recent development of noble‐metal‐free materials as SERS substrates and their potential applications, especially semiconductors and emerging graphene‐based nanostructures. Rather than providing an exhaustive review of this field, possible contributions from semiconductor substrates, characteristics of graphene enhanced Raman scattering, as well as effect factors such as surface plasmon resonance, structure and defects of the nanostructures that are considered essential for SERS activity are emphasized. The intention is to illustrate, through these examples, that the promise of noble‐metal‐free materials for enhancing detection sensitivity can further fuel the development of SERS‐related applications.     

Electrochemical synthesis and functionality evaluation of silver nanostructured layers

The functionality of silver nanostructures prepared by means of electrochemical deposition of silver into the pores of anodic alumina oxide (AAO) template was examined in correlation to electrodeposition conditions. The optical activity as well as the chemical separation ability of prepared nanostructured films was studied. The surface enhanced Raman spectroscopy (SERS) performance was evaluated by the signals of rhodamine 6G, 4‐aminothiophenol and 2,7‐dichlorfluorescein. Nanostructured silver substrates showed moderate surface enhancement for Raman scattering from adsorbed molecules with the magnitude of about 26.9. Moreover, a novel separation/pre‐concentration function of the silver nanowire structures was indicated. The identification and position detection of the model compounds were realised with SERS. The separation of single chemical components from the two‐component mixture over the examined silver nanostructured films was sufficiently approved. The results obtained demonstrated the potential of the prepared substrate as a SERS detection and separation probe for further implementation to any instrumentation. Copyright © 2014 John Wiley & Sons, Ltd.     

Immobilization of silver nanoparticles into POEGMA polymer brushes as SERS‐active substrates

Surface‐enhanced Raman scattering (SERS) has attracted a great deal of interest during the past four decades and emerged as an ultrasensitive optical technique for chemical and biomedical analysis. It is widely accepted that the facile fabrication of SERS substrates with high activity and good reproducibility is of crucial importance for their applications. Herein, we report on a fast and robust method for the synthesis and immobilization of silver nanoparticles (AgNPs) into poly(oligo(ethylene glycol) methacrylate) (POEGMA) brushes under mild conditions without using any reducing agents. POEGMA brushes of different chain lengths were synthesized directly on silicon wafers by surface‐initiated atom transfer radical polymerization with various reaction time. X‐ray photoelectron spectroscopy and field emission scanning electron microscope measurements indicated that the AgNPs were firmly and homogeneously embedded into POEGMA brushes. The resulting POEGMA–AgNP hybrid films were employed as SERS substrates for the detection of 4‐aminothiophenol, giving rise to an enhancement factor of up to 1.9 × 10⁶. The influence of the POEGMA's chain length on SERS performance was also investigated. Copyright © 2016 John Wiley & Sons, Ltd.     

Fabrication and characterization of homogeneous surface-enhanced Raman scattering substrates by single pulse UV-laser treatment of gold and silver films

The fabrication of SERS-active substrates, which offer high enhancement factors as well as spatially homogeneous distribution of the enhancement, plays an important role in the expansion of surface-enhanced Raman scattering (SERS) spectroscopy to a powerful, quantitative, and noninvasive measurement technique for analytical applications. In this paper, a novel method for the fabrication of SERS-active substrates by laser treatment of 20, 40, and 60 nm thick gold and of 40 nm thick silver films supported on quartz glass is presented. Single 308 nm UV-laser pulses were applied to melt the thin gold and silver films. During the cooling process of the noble metal, particles were formed. The particle size and density were imaged by atomic force microscopy. By varying the fluence, the size of the particles can be controlled. The enhancement factors of the nanostructures were determined by recording self-assembled monolayers of benzenethiol. The intensity of the SERS signal from benzenethiol is correlated to the mean particle size and thus to the fluence. Enhancement factors up to 10(6) with a high reproducibility were reached. Finally we have analyzed the temperature dependence of the SERS effect by recording the intensity of benzenethiol vibrations from 300 to 120 K. The temperature dependence of the SERS effect is discussed with regard to the metal properties.     

A fast and low‐cost spray method for prototyping and depositing surface‐enhanced Raman scattering arrays on microfluidic paper based device

In this study, a fast, low‐cost, and facile spray method was proposed. This method deposits highly sensitive surface‐enhanced Raman scattering (SERS) silver nanoparticles (AgNPs) on the paper‐microfluidic scheme. The procedures for substrate preparation were studied including different strategies to synthesize AgNPs and the optimization of spray cycles. In addition, the morphologies of the different kinds of paper substrates were characterized by SEM and investigated by their SERS signals. The established method was found to be favorable for obtaining good sensitivity and reproducible results. The RSDs of Raman intensity of randomly analyzing 20 spots on the same paper or different filter papers depositing AgNPs are both below 15%. The SERS enhancement factor is approximately 2 × 10⁷. The whole fabrication is very rapid, robust, and does not require specific instruments. Furthermore, the total cost for 1000 pieces of chip is less than $20. These advantages demonstrated the potential for growing SERS applications in the area of environmental monitoring, food safety, and bioanalysis in the future.     

3D aluminum/silver hierarchical nanostructure with large areas of dense hot spots for surface‐enhanced raman scattering

Plasmonic nanomaterials possessing large‐volume, high‐density hot spots with high field enhancement are highly desirable for ultrasensitive surface‐enhanced Raman scattering (SERS) sensing. However, many as‐prepared plasmonic nanomaterials are limited in available dense hot spots and in sample size, which greatly hinder their wide applications in SERS devices. Here, we develop a two‐step physical deposition protocol and successfully fabricate 3D hierarchical nanostructures with highly dense hot spots across a large scale (6 × 6 cm²). The nanopatterned aluminum film was first prepared by thermal evaporation process, which can provide 3D quasi‐periodic cloud‐like nanostructure arrays suitable for noble metal deposition; then a large number of silver nanoparticles with controllable shape and size were decorated onto the alumina layer surfaces by laser molecular beam epitaxy, which can realize large‐area accessible dense hot spots. The optimized 3D‐structured SERS substrate exhibits high‐quality detection performance with excellent reproducibility (13.1 and 17.1%), whose LOD of rhodamine 6G molecules was 10^?9 M. Furthermore, the as‐prepared 3D aluminum/silver SERS substrate was applied in detection of melamine with the concentration down to 10^?7 M and direct detection of melamine in infant formula solution with the concentration as low 10 mg/L. Such method to realize large‐area hierarchical nanostructures can greatly simplify the fabrication procedure for 3D SERS platforms, and should be of technological significance in mass production of SERS‐based sensors.     

Ultrasensitive SERS Detection of TNT by Imprinting Molecular Recognition Using a New Type of Stable Substrate

We report herein a method for the ultra‐trace detection of TNT on p‐aminothiophenol‐functionalized silver nanoparticles coated on silver molybdate nanowires based on surface‐enhanced Raman scattering (SERS). The method relies on π‐donor–acceptor interactions between the π‐acceptor TNT and the π‐donor p,p′‐dimercaptoazobenzene (DMAB), with the latter serving to cross‐link the silver nanoparticles deposited on the silver molybdate nanowires. This system presents optimal imprint molecule contours, with the DMAB forming imprint molecule sites that constitute SERS “hot spots”. Anchoring of the TNT analyte at these sites leads to a pronounced intensification of its Raman emission. We demonstrate that TNT concentrations as low as 10^?12 M can be accurately detected using the described SERS assay. Most impressively, acting as a new type of SERS substrate, the silver/silver molybdate nanowires complex can yield new silver nanoparticles during the detection process, which makes the Raman signals very stable. A detailed mechanism for the observed SERS intensity change is discussed. Our experiments show that TNT can be detected quickly and accurately with ultra‐high sensitivity, selectivity, reusability, and stability. The results reported herein may not only lead to many applications in SERS techniques, but might also form the basis of a new concept for a molecular imprinting strategy.     

Silver–platinum core–shell nanoparticles for surface-enhanced Raman spectroscopy

Core–shell Ag@Pt nanoparticles have been synthesised by the means of seed-growth reaction including reduction of PtCl₄²⁻ with silver and replacing Ag atoms with Pt. Surface-enhanced Raman scattering (SERS) spectra of pyridine (which gives slightly different spectra when interacting with various metals) adsorbed on synthesised Ag@Pt clusters were measured. SERS measurements have revealed that deposition of the platinum layer causes near elimination of the spectral interferences from pyridine directly interacting with the silver core. The average SERS enhancement factor for pyridine adsorbed on the Ag@Pt clusters was estimated as equal to about 10³–10⁴, significantly higher than the SERS enhancement factor achievable on the pure platinum nanostructures. Using the silver core (instead of the previously used gold cores) allows for measurement of strong SERS spectra on the Pt covered nanostructures for the wider range of the excitation radiation. This procedure of platinum deposition was tested with various silver nanoparticles – produced with borohydride, citrate and citrate/borohydride methods – which substantially differ in size distribution. The application of formed Ag@Pt structures for obtaining intense Raman spectra for molecules adsorbed on only slightly modified platinum surfaces is discussed.     

Sub-wavelength Raman spectroscopy on isolated silver islands

Surface Enhanced Raman Spectroscopy (SERS) is a valuable analytical tool for the investigation of molecules adsorbed on roughened noble metal surfaces. The shape, size, and surrounding of the metal protrusions play an important role in the Raman scattering enhancement. By combining scanning near-field optical microscopy (SNOM) with Raman spectroscopy the spatial resolution suffices for investigating isolated silver islands on SERS active substrates. We demonstrate an optical resolution below 70 nm for recording spectra on specifically prepared and fully characterized SERS substrates. For a quantitative evaluation of the SERS signal the spatial distribution of Rhodamine 6G (R6G) deposited on the SERS substrate was determined by friction force measurements. By comparing the Raman intensities of the SERS substrates with those of unmetallized support plates absolute SERS enhancement factors at specific locations on top and in the vicinity of the silver islands were determined directly.