Effect of Urea on the Morphology of Co3O4 Nanostructures and Their Application for Potentiometric Glucose Biosensor

In this study, an effect of different concentrations of urea on the morphology of cobalt oxide (Co₃O₄) nanostructures was investigated. The Co₃O₄ nanostructures are fabricated on gold coated glass substrate by the hydrothermal method. The morphological and structural characterization was performed by scanning electron microscopy, and X‐ray diffraction techniques. The Co₃O₄ nanostructures exhibit morphology of flowers‐like and have comprised on nanowires due to the increasing amount of urea. The nanostructures were highly dense on the substrate and possess a good crystalline quality. The Co₃O₄ nanostructures were successfully used for the development of a sensitive glucose biosensor. The presented glucose biosensor detected a wide range of glucose concentrations from 1×10^?6 M to 1×10^?2 M with sensitivity of a ?56.85 mV/decade and indicated a fast response time of less than 10 s. This performance could be attributed to the heterogeneous catalysis effect at glucose oxidase enzyme, nanoflowers, and nanowires interfaces, which have enhanced the electron transfer process on the electrode surface. Moreover, the reproducibility, repeatability, stability and selectivity were also investigated. All the obtained results indicate the potential use of the developed glucose sensor for monitoring of glucose concentrations at drugs, human serum and food industry related samples.     

A selective and sensitive sensor based on highly dispersed cobalt porphyrin-Co<Subscript>3</Subscript>O<Subscript>4</Subscript>-graphene oxide nanocomposites for the detection of methyl parathion

A new type of graphene-Co₃O₄ functionalized porphyrin was synthesized and used for selective and sensitive detection of methyl parathion (MP). Co₃O₄ nanoparticles were firstly modified onto graphene oxide sheets and the porphyrin/Co₃O₄/graphene nanocomposites were then synthesized by self-assembly decoration of anion porphyrin on Co₃O₄-modified graphene sheets by π–π stacking. By dexterously controlling the electrochemical reduction variables and optimizing the electrode preparation parameters, with the satisfactory conductivity, strong adsorption toward MP, the developed novel sensor fabricated with the as-synthesized nano-assembly for determination of MP shows some satisfactory properties such as a wide linear concentration range (from 4.0?×?10^?7 M to 2.0?×?10^?5 M), low detection limit (1.1?×?10^?8 M), favorable repeatability, long-time storage stability, and satisfactory anti-interference ability. It also had high precision for the real sample analysis, which indicated the good perspective for field application.     

Preparation of Co3O4/graphene Oxide Composites by a Depositing‐decompostion Method and its Application for Electrochemical Determination of Glucose

Co₃O₄/graphene oxide (GO) nanocomposites were successfully prepared by a depositing‐decomposition method. The as‐prepared samples were characterized by scanning electron microscopy (SEM) and Raman spectroscopy. Cyclic voltammetry (CV) was used to evaluate the electrochemical response of a glass carbon electrode (GCE) modified with Co₃O₄/GO nanocomposite towards glucose. Compared with the Co₃O₄/GCE, the Co₃O₄/GO/GCE exihibits higher electrocatalytic activity due to the synergistic effects of electrocatalytic ability of Co₃O₄ and large surface of GO. The Co₃O₄/GO/GCE was applied for glucose detection in alkaline solution. The linear current response range of glucose on Co₃O₄/GO/GCE covered the range from 9 × 10^?5 to 6.03 × 10^?3 M, with a detection limit of 5.2 × 10^?7 M (S/N = 3).     

An enhanced oxime-based biomimetic electrochemical sensor modified with multifunctional AuNPs–Co<Subscript>3</Subscript>O<Subscript>4</Subscript>–NG composites for dimethoate determination

An enhanced oxime-based electrochemical sensor decorated with gold nanoparticles (AuNPs) and Co₃O₄ hexagonal nanosheets coupled with nitrogen-doped graphene has been developed for dimethoate determination dramatically. The introduction of Co₃O₄ hexagonal nanosheets tackles agglomeration of AuNPs and also enhances the sensitivity of electrochemical sensors greatly. The structure and properties of the synthesized composites were characterized by scanning electron microscopy, X-ray diffraction, Raman spectroscopy and Fourier transform infrared spectroscopy, confirming the successful modification of 2-(4-mercaptobutoxy)-1-naphthaldehyde oxime and Co₃O₄ supported AuNPs in a great experiment. In addition, differential pulse voltammetry further revealed that the developed electrochemical sensor exhibited excellent selectivity, sensitivity and stability in real samples analysis. Under optimal conditions, the modified sensor displayed a broad linear range from 1?×?10^?14 M to 1?×?10^?6 M with a fairly low detection limit of 8.4?×?10^?14 M (S/N?=?3) and was expected to act as a superior method for dimethoate determination.     

Amperometric Determination of Maltol using a Cobalt Oxide-Assembled MCM-41 Composite-Modified Glassy Carbon Electrode

A sensitive and selective amperometric method for maltol is reported based on a nanostructural Co₃O₄-assembled Mobil composite material (MCM-41). The amperometric sensor was characterized by scanning electron microscopy, energy-dispersive X-ray spectrometry, cyclic voltammetry, electrochemical impedance spectroscopy, and ultraviolet–visible absorption spectroscopy. The obtained calibration curve showed that the oxidative peaks increased linearly with the maltol concentration from 1.66?×?10^?6?M to 1.15?×?10^?4?M with a detection limit of 0.42?µM. Furthermore, the mechanism of oxidation of the analyte on the modified electrode surface was investigated using electrochemical techniques. The modified electrode was used for the determination of maltol using the method of standard addition with satisfactory results.     

Self‐assembly of p‐Aminothiophenol on Gold Surface: Application for Impedimetric and Potentiometric Sensing of Cobalt (II) Ions – A Comparative Study

Cobalt, despite an essential biological element, imposes threat to humans when exposed to high concentration or even to low concentration for long term which demands the development of highly sensitive and selective analytical methods for its trace analysis. In the present work, self‐assembly of p‐aminothiophenol (p‐ATP) on gold surface (Au?ATP SAM) was carried out and for the first time, applied as a platform for impedimetric and potentiometric sensing of Co²⁺. Au?ATP SAM was characterized using electrochemical techniques: cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), in the presence of two redox probes: [Fe(CN)₆]^3?/4? and [Ru(NH₃)₆]^2+/3+ to evaluate associated passivating behaviour. Au?ATP SAM completely blocked [Fe(CN)₆]^3?/4? as compared to [Ru(NH₃)₆]^2+/3+ which may be attributed to inner‐sphere and outer‐sphere ET mechanisms, respectively. Au?ATP SAM was found to exhibit excellent sensitivity towards Co²⁺ in a wider concentration range from 1.0×10^?12 M to 1.0×10^?5 M (r²=0.963) at pH 5.5 with a detection limit of 6.0×10^?13 M and superior selectivity. Further, carbon paste electrode (CPE) was prepared by incorporating p‐ATP bound gold nanoparticles and explored for potentiometric sensing of Co²⁺ which exhibited Nernstian slope of 29.2±0.2 mV/dec in linear concentration range of 1.0×10^?6 M–1.0×10^?1 M (r²=0.971) with a detection limit of 8.0×10^?7 M. The proposed sensors were successfully applied for estimation of Co²⁺ content in water samples.     

Voltammetric Determination of Bisphenol A in Water and Juice Using a Lanthanum (III)-Doped Cobalt (II,III) Nanocube Modified Carbon Screen-Printed Electrode

A La³⁺ doped Co₃O₄ nanocube modified graphite screen-printed electrode (La³⁺-doped Co₃O₄ nanocube/SPE) was prepared and utilized for the sensitive voltammetric determination of bisphenol A. In comparison with an unmodified electrode, the presence of the La³⁺ doped Co₃O₄ nanocubes caused a significant enhancement in the peak current. Differential pulse voltammetry (DPV), cyclic voltammetry (CV), and chronoamperometry approaches were utilized as diagnostic methods. The modified SPE was used to determine bisphenol A concentrations in the range from 0.5 to 900.0?μM with a limit of detection equal to 6.1?×?10^?8 M. Real samples were effectively analyzed with the modified electrode.     

Artificial Enzyme Mimics for Catalysis and Double Natural Enzyme Co-immobilization

This work presents a new chemiluminescent (CL) probe array assay. The new type CL probe array is based on enzyme mimics of Co₃O₄–SiO₂ mesoporous nanocomposite material, which not only have an excellent catalytic effect on the luminol–H₂O₂ CL reaction in an alkaline medium but also can be used for the immobilization of enzymes. The linear range of the lactose concentration is 3.0?×?10^?7 to 1.0?×?10^?5 g mL^?1 and the detection limit is 6.9?×?10^?8 g mL^?1. β-Galactosidase and glucose oxidase were selected as a model for enzyme assays to demonstrate the applicability of Co₃O₄–SiO₂ mesoporous nanocomposite material in multienzyme immobilization. The novel bifunctional CL probe array has been successfully applied to the determination of lactose in milk.     

The Use of the CS2N− 3/HSO− 3/O2 Reaction for the Analytical Determination of Dissolved Oxygen

Abstract

A new analytical Spectrophotometric method has been developed for the determination of dissolved O₂ in the range 4.6 × 10^?6?4.1 × 10^?5M, based on the CS₂N^? ₃/HSO^? ₃/O₂ reaction. In one single experiment 2.3 × 10^?5 M of oxygen can be determined with an uncertainty of ± 7 × 10^?7M for a confidence level of 95%.     

Highly Sensitive Electrochemical Sensor for Nitric Oxide Using the Self‐Assembled Monolayer of 1,8,15,22‐Tetraaminophthalocyanatocobalt(II) on Glassy Carbon Electrode

Glassy carbon (GC) electrode modified with a self‐assembled monolayer (SAM) of 1,8,15,22‐tetraaminophthalocyanatocobalt(II) (4α‐Co^IITAPc) was used for the selective and highly sensitive determination of nitric oxide (NO). The SAM of 4α‐Co^IITAPc was formed on GC electrode by spontaneous adsorption from DMF containing 1 mM 4α‐Co^IITAPc. The SAM showed two pairs of well‐defined redox peaks corresponding to Co^III/Co^II and Co^IIIPc^?1/Co^IIIPc^?2 in 0.2 M phosphate buffer (PB) solution (pH 2.5). The SAM modified electrode showed excellent electrocatalytic activity towards the oxidation of nitric oxide (NO) by enhancing its oxidation current with 310 mV less positive potential shift when compared to bare GC electrode. In amperometric measurements, the current response for NO oxidation was linearly increased in the concentration range of 3×10^?9 to 30×10^?9 M with a detection limit of 1.4×10^?10 M (S/N=3). The proposed method showed a better recovery for NO in human blood serum samples.     

4-Aminothiophenol functionalized gold nanoparticles as colorimetric sensors for the detection of cobalt using UV–Visible spectrometry

The 4-aminothiophenol functionalized gold nanoparticles (4-ATP-Au NPs) were used as colorimetric sensors for the detection of Co²⁺ in aqueous solution by using UV–Visible spectrometry. The 4-ATP-Au NPs were characterized by UV–Visible, FT-IR, TEM and dynamic light scattering (DLS) which confirmed their higher binding affinity towards Co²⁺ through coordinate covalent interactions that can be observed with the naked eye. The absorbance ratio (A₅₇₀/A₅₂₃) was linear with Co²⁺ concentration in the range of 15 × 10^?3 to 1 × 10^?3 M with a correlation coefficient of (R ²) 0.994, and the limit of detection was 5.79 × 10^?5 M.     

Coralloid and hierarchical Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanostructures used as supercapacitors with good cycling stability

Coralloid and hierarchical Co₃O₄ nanostructures were synthesized by a facile two-step approach composed of room temperature solution-phase synthesis without any surfactant and calcination of precursor. Owing to the unique structural features, the capacitance of Co₃O₄ could reach up to 591 F g^?1 at a current density of 0.5 A g^?1. Especially the cycling stability remained about 97 % after 2000 cycles at a current density of 1 A g^?1. These results demonstrated that the coralloid and hierarchical Co₃O₄ were excellent candidates for electrochemical supercapacitor devices.     

Surfactant-assisted transport of lead ion through a bulk liquid membrane containing dicyclohexyl-18-crown-6: efficient removal of lead from blood serum and sea water

The selective and efficient surfactant assisted transport of Pb²⁺ ions using a bulk liquid membrane composed of dicyclohexyl-18-crown-6, as a highly selective carrier, in chloroform solution is reported. In the presence of 6.0 × 10^?2 M P₂O₇ ^4? ions and 10^?3 M sodium dodecylsulfate, as suitable stripping agent and membrane/receiving phase interface modifier, respectively, in the receiving phase and 2.4 × 10^?3 M picric acid, as a counter ion in the source phase, the amount of lead transported across the liquid membrane after 5 h is 100.0 ± 1.1. The designed transport system was successfully applied to the removal of lead from sea water and blood serum samples.     

Non-enzymatic hydrogen peroxide sensor based on a nanoporous gold electrode modified with platinum nanoparticles

A novel non-enzymatic electrochemical sensor based on a nanoporous gold electrode modified with platinum nanoparticles was constructed for the determination of hydrogen peroxide (H₂O₂). Platinum nanoparticles exhibit good electrocatalytic activity towards hydrogen peroxide. The nanoporous gold (NPG) increases the effective surface area and has the capacity to promote electron-transfer reactions. With electrodeposition of Pt nanoparticles (NPs) on the surface of the nanoporous gold, the modified Au electrode afforded a fast, sensitive and selective electrochemical method for the determination of H₂O₂. The linear range for the detection of H₂O₂ was from 1.0 × 10^?7 M to 2.0 × 10^?5 M while the calculated limit of detection was 7.2 × 10^?8 M on the basis of the 3σ/slope (σ represents the standard deviation of the blank samples). These findings could lead to the widespread use of electrochemical sensors to detect H₂O₂.     

Mechanism of electron transfer reaction of ternary nitrilotriacetatocobalt(II) complexes involving succinate and malonate as secondary ligands

The mechanism of oxidation of ternary complexes, [Co^II(nta)(S)(H₂O)₂]^3? and [Co^II(nta)(M)(H₂O)]^3? (nta = nitrilotriacetate acid, S = succinate dianion, and M = malonate dianion), by periodate in aqueous medium has been studied spectrophotometrically over the (20.0–40.0) ± 0.1°C range. The reaction is first order with respect to both [IO₄^?] and the complex, and the rate decreases over the [H⁺] range (2.69–56.20) × 10^?6 mol dm^?3 in both cases. The experimental rate law is consistent with a mechanism in which both the hydroxy complexes [Co^II(nta)(S)(H₂O)(OH)]^4? and [Co^II(nta)(M)(OH)]^4? are significantly more reactive than their conjugate acids. The value of the intramolecular electron transfer rate constant for the oxidation of the [Co^II(nta)(S)(H₂O)₂]^3?, k₁ (3.60 × 10^?3 s^?1), is greater than the value of k₆ (1.54 × 10^?3 s^?1) for the oxidation of [Co^II(nta)(M)(H₂O)]^3? at 30.0 ± 0.1°C and I = 0.20 mol dm^?3. The thermodynamic activation parameters have been calculated. It is assumed that electron transfer takes place via an inner‐sphere mechanism. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 103–113, 2008     

Synthesis of Cobalt Ion‐Based Coordination Polymer Nanowires and Their Conversion into Porous Co3O4 Nanowires with Good Lithium Storage Properties

Cobalt ion‐based coordination polymer nanowires were synthesized by using nitrilotriacetic acid (NA) as a chelating agent by a one‐step hydrothermal approach. In the synthesis, cobalt ions were bonded with amino or carboxyl groups of NA to form one‐dimension polymer nanowires, which can be confirmed by FTIR and TGA results. Our experimental results show that the morphologies of polymer nanowires greatly depend on the precursor salts, ratios between deionized water and isopropyl alcohol. The probable molecular formula and growth mechanism have been proposed. After heat treatment, the cobalt ion‐based coordination polymer nanowires can be converted into porous Co₃O₄ nanowires, which completely preserved the nanowire‐like morphology. When used as anodes in lithium‐ion batteries, the obtained porous Co₃O₄ nanowires exhibited a high reversible capacity of 810 mA h g^?1 and stable cyclic retention at 30th cycle. The good electrochemical performance could be attributed to the porous nanostructure of Co₃O₄, which provides pathways for easy accessibility of electrolytes and fast transportation of lithium ions.     

Amperometric Biosensors Based on Platinum Nanowires

Abstract

Platinum nanowires (PtNW) were prepared by an electrodeposition strategy using nanopore alumina template. The nanowires prepared were dispersed in chitosan (CHIT) solution and stably immobilized onto the surface of glassy carbon electrode (GCE). The electrochemical behavior of PtNW‐modified electrode and its application to the electrocatalytic reduction of hydrogen peroxide (H₂O₂) are investigated. The modified electrode allows low potential detection of hydrogen peroxide with high sensitivity and fast response time. As an application example, the glucose oxidase was immobilized onto the surface of PtNW‐modified electrode through cross‐linking by glutaric dialdehyde. The detection of glucose was performed in phosphate buffer at –0.2 V. The resulting glucose biosensor exhibited a short response time (<8 s), with a linear range of 10^?5?10^?2 M and detection limit of 5×10^?6 M.     

A Visible‐Light Driven Photoelectrochemical Aptasensor for Endocrine Disrupting Chemicals Bisphenol A with High Sensitivity and Specificity

A visible‐light driven photoelectrochemical (PEC) sensor based on aptamer immobilized TiO₂‐Fe₂O₃ nanotubes was proposed for the first time and highly sensitive and selective bisphenol A determination was realized. Taking advantage of the alloy oxide nanotube structure, high surface area, good biocompatibility, superior photoelectrocatalytic performance, a limit of detection toward BPA as low as 1.8×10^?11 M with linearity in the range from 1.8×10^?11 to 3.2×10^?9 M could be achieved. Specificity was greatly exhibited for this aptasensor under 100‐fold excess concentration of estriol, resorcinol, nonylphenol, 2,4‐D, acetamiprid, chlorpyrifos and omethoate. Simultaneously, satisfactory results were obtained in real water sample investigation from industrial plastics and drinking water. A novel visible‐light driven PEC method for highly sensitive and selective detection of BPA was thus established.     

Urea Assisted Synthesis of Flower Like CuO Nanostructures and Their Chemical Sensing Application for the Determination of Cadmium Ions

The novel nanostructures of CuO with improved morphology are strongly required for the development of devices with enhanced performance. In this study flower like nanostructures of CuO are synthesized by hydrothermal method using urea as tuning material for the morphology of CuO during the growth process. Scanning electron microscopy (SEM) and X‐ray diffraction (XRD) techniques were used for the characterization of these nanostructures. The nanostructures are highly dense, uniform and well aligned on the gold coated glass substrate. Moreover, CuO nanostructures exhibited pure phase of CuO. These novel CuO nanostructures were potentially used for the construction of cadmium ion sensor by functionalizing with tetrathia‐12‐crown‐4 a selective cadmium ion ionophore. The proposed cadmium ion sensor has detected the wide range of cadmium ion concentrations from 1.0×10^?9–1.0×10^?1 M with a sensitivity of 29.3±0.3 mV/decade and also a fast response time of less than 10.0 s is demonstrated. CuO nanostructures based cadmium ion selective electrode has also shown excellent reproducibility, repeatability, selectivity, and stability. The sensor electrode was also used as indicator electrode for the confirmation of practical utility and the obtained result describes the good behavior of the sensor in the potentiometric titration for the determination of cadmium ions.     

Super-Paramagnetic Nanoparticles by Surface Imprinting on Graphene Oxide Modified Iron (II,III) with Application for the Determination of Ovalbumin by Absorption Spectroscopy

Protein surface imprinting produces materials capable of selective recognition and capture of proteins. Herein, a protein surface imprinted polymer on graphene oxide modified super-paramagnetic Fe₃O₄ nanoparticles is reported. The molecularly imprinted polymer was synthesized by ultrasound-assisted suspension polymerization, using ovalbumin as the template molecule, 3-aminophenylboronie acid as the functional monomer, and methylene-bis-acrylamide as the cross-linking agent. The nanoparticles were approximately 40 nanometers in size and super-paramagnetic. Moreover, these particles demonstrated considerably high adsorption capacity, fast adsorption kinetics, and selective binding affinities toward the template protein ovalbumin. The calibration curve of ovalbumin was linear from 5.0 × 10^?11 to 1.0 × 10^?10 molar. The limit of detection of ovalbumin was 2.0 × 10^?11 M. These results show that this super-paramagnetic material has potential for biological macromolecule separation and determination.