Buckling of Carbon Nanotubes: a Molecular Static Approach

Axially loaded cylindrical continuous shells collapse either globally like a rod (Euler buckling), or locally (local shell wall buckling), depending on the ratio of the length of the shell over the diameter [1]. There are many published investigations, which show that this behaviour is also true for Carbon Nanotubes CNTs [2]. In this work a systematic analysis of the problem is given in the framework of molecular statics. This approach has the advantage of taking care of the discrete structure of CNTs. The covalent bonds of the hexagonal carbon network are modelled as nonlinear springs, and the compressive load is applied quasistatically, excluding follower forces. The software package LAMMPS [3] offers the AIREBO potential [4] and is suitable for describing CNTs. To identify the stability boundary in the parameter plane, LAMMPS is extended to compute the definiteness of the Hessian. (© 2010 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

加肋圆柱壳在轴压作用下的屈曲和后屈曲

本文讨论完善和非完善的,纵向加肋和正交加肋圆柱壳在轴压作用下的屈曲和后屈曲性态.依据文[1]提供的圆柱薄壳屈曲的边界层理论及其分析方法,给出了加肋圆柱壳在轴压作用下的屈曲和后屈曲理论分析.本文同时讨论肋骨与壳板材料不同时对加肋圆柱壳屈曲和后屈曲性态的影响.     

Axisymmetrical vibrations of shells of revolution under abrupt loading

A frequency method is proposed for solving the problem of the vibrations of shells of revolution taking into account the energy dissipation under arbitrary force loading and on collision with a rigid obstacle. The Laplace transform is taken of the equation of the vibrations of a shell of revolution with non-zero initial conditions. For the inhomogeneous differential equation obtained, a variational method is used to solve the boundary-value problem, which consists of finding the Laplace-transformed boundary transverse and longitudinal forces and bending moments as functions of the boundary displacements. The equations of equilibrium of nodes, i.e. the corresponding equations of the finite-element method, are then compared, using results obtained earlier [1–4]. Amplitude-phase-frequency characteristics (APFCs) for the shell cross-sections selected are plotted. An inverse Laplace transformation is carried out using the clear relationship between the extreme points of the APFCs and the coefficients of the corresponding terms of the series in an expansion vibration modes [3]. In view of the fact that the proposed approach is approximate, numerical testing is used.     

圆柱薄壳在外压作用下屈曲的边界层理论

本文依据文[14]提供的圆柱薄壳屈曲的边界层理论,以挠度为摄动参数,采用奇异摄动方法,研究了固支圆柱薄壳在侧向外压和静水外压作用下的屈曲和后屈曲性态.本文同时考虑了初始几何缺陷的影响.计算结果与实验结果的比较表明二者是一致的.     

环肋加劲圆柱壳在静水压力作用下的初始后屈曲分析

本文用Koiter理论分析环肋加劲圆柱壳在静水压力作用下的后屈曲性能.前屈曲状态采用与边界条件一致的非线性有矩方程,本征值问题的解用伽辽金方法求出,得到的临界载荷与经典线性解作了比较.具体计算了三种不同环肋参数的外肋加劲圆柱壳.结果表明,肋的强弱不仅显著影响临界载荷值,同时也改变了柱壳的缺陷敏感度.     

层合板壳脱层屈曲的有限元分析

通过建立一类新的参考面有限单元,得到适用于分析层合板壳脱层屈曲问题的有限元方法。指出了利用Mindlin假设意义下的变形协调条件,可以将大多数胜任层合板壳分析的一般板壳单元改造为相应的参考面单元。这一方法确保了位移场的合理性和协调条件的满足。为验证参考面单元的有效性,还对壳体脱层屈曲的几个算例作了数值分析。     

Stability of Conical Shells of Metal Composites Beyond the Elastic Limit

The equations for integral instantaneous characteristics of composite materials consisting of elastoplastic fibers and matrix are derived based on the known hypotheses of uniform strain or stress fields. The constitutive relations for a layered shell are obtained. The numerical algorithm elaborated is used to solve the stability problem for conical boron-aluminum shells under external pressure and axial compression. It is shown that the shells of medium thickness lose their stability under loads whose magnitude depends on the plasticity of the binder. The plasticity has a decisive influence on the choice of the optimum directions of reinforcement. If the parameters of a shell are such that the buckling occurs beyond the elastic limit, the shell must be reinforced in the direction of precritical stresses. However, this is possible only upon separate action of loads.     

冲击扭矩作用下弹性圆柱壳中应力波导致的动力屈曲问题

圆柱壳的屈曲问题曾被许多力学工作者从不同的角度进行过研究．本文以半无限长弹性圆柱壳为研究对象，将冲击扭矩作用下圆柱壳的动力屈曲归结为由于扭转应力波的传播导致的分叉问题，最后将此分叉问题化为一个非线性方程组的求解，并对动力屈曲时横向惯性的影响进行了讨论，最后进行了数值分析，得到了一些有益的结论．     

Buckling Instability of Sectional Noncircular Cylindrical Composite Shells under Axial Compression

The problem of buckling instability of cylindrical shells under axial compression is considered. The shells consist of cylindrical sections of smaller radius. The geometrical parameters of the shells are approximated by Fourier series on a discrete point set. A Timoshenko-type shell theory is used. The solution is obtained in the form of trigonometric series. It is shown that shells consisting of cylindrical sections have considerable advantages over circular ones. At a constant shell weight, the choice of suitable parameters of shell sections leads to a significant increase in the critical load. The composite shells considered possess higher efficiency indices in comparison with isotropic ones.     

Buckling and vibration of the two-dimensional quasicrystal cylindrical shells under axial compression

In this paper, the buckling and the free vibration of the quasicrystal cylindrical shells under axial compression are investigated. Three quasi-periodicity cases of quasicrystal cylindrical shells are considered. The first-order shear displacement theory of the cylindrical shells is utilized to obtain the equations of motion and the boundary conditions. Numerical results for simply supported cylindrical shells at the two ends are calculated. The effects of the geometry, in-plane phonon and phason loads, and half-wave number of the quasicrystal cylindrical shells on both the buckling loads and the frequency are demonstrated.     

层合板壳脱层曲面的有限元分析

通过建立一类新的参考面有限单元,得到适应于分析层合板壳脱层屈曲问题的有限元方法,指出了利用Ｍｉｎｄｌｉｎ假设意义下的变形协调条件,可以将大多数胜任层合板壳分析的一般板壳单元改造为相应的参考面单元,这一方法确保了位移场的合理性和协调条件满足,为验证参考而单元的有效性和协调还对壳体脱层屈曲的几个算例作了数值分析。     

严格求解夹层圆柱壳在轴压下的轴对称失稳问题

本文在文献[1]的基础上,用严格的方法求解两端简支的夹层圆柱壳在均匀轴压下的轴对称失稳问题.内、外表层很薄弹性模量又大,按薄壳理论处理;夹心较厚弹性模量又相当小,横向剪切变形的影响必须考虑,在研究夹层壳的整体失稳尤其是局部失稳时,横向的拉伸和压缩变形也不可忽略,用数学弹性力学的方法处理.本文导得了可求解轴对称整体失稳和局部失稳临界载荷的超越方程,用数值计算的方法可算得临界载荷的最小值.对于整体失稳的情况,给出算例,与夹层壳理论的解作了比较.     

Static collapse: A survey of methods and modes of behavior

The phenomenon of static collapse, henceforth called ‘buckling’, is first illustrated by the behavior of a fairly thick cylindrical shell, which under axial compression deforms at first axisymmetrically and later nonaxisymmetrically. Thus, static buckling encompasses two modes of behavior, nonlinear collapse at the maximum point in a load versus deflection curve and bifurcation buckling. Accurate prediction of critical loads corresponding to either mode in the plastic range of material behavior requires a simultaneous accounting for moderately large deflections and nonlinear, irreversible, path-dependent material. A survey is given of plastic buckling, which spans three areas: asymptotic analysis of postbifurcation behavior of perfect and imperfect simple structures, general nonlinear analysis of arbitrary structures, and nonlinear analysis for collapse at a maximum load and bifurcation buckling of shells of revolution. In the survey of general nonlinear structural analysis, some emphasis is given to strategies for solving the governing nonlinear equations incrementally. Numerous examples, generated primarily with the STAGS computer program, which was developed by Almroth and his colleagues, reveal many complex modes of buckling behavior.     

Dynamic stability of glass-reinforced plastic shells

The problem of the dynamic stability of circular-cylindrical glass-reinforced plastic shells subjected to external transverse pressure is examined in the nonlinear formulation. After the Lagrange equations have been constructed, the problem reduces to the integration of a system of ordinary differential equations with aperiodic coefficients. The integration has been carried out numerically on a computer for various loading rates and shell parameters. Analogous problems for isotropic metal shells were examined in [1–4]. A review of the subject may be found in [5].Mekhanika Polimerov, Vol. 4, No. 1, pp. 109–115, 1968     

湿热环境中复合材料层合圆柱薄壳屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响。基于细观力学模型复合材料性能与湿度和温度变化有关。壳体控制方程基于经典层合壳理论,并包括湿热效应。壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径。分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响。数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为。讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响。     

吸湿老化影响下天然纤维增强复合圆柱壳屈曲分析的辛方法

针对一类天然纤维增强复合(natural fiber reinforced composite, NFRC)圆柱壳的屈曲问题展开研究,基于Reissner壳体理论和辛方法,建立了轴压NFRC圆柱壳在Hamilton体系下的屈曲控制方程。将原问题归结为辛空间下的辛本征问题,通过求解辛本征值和本征解可以直接获得高精度的临界载荷和解析的屈曲模态。数值算例分析了NFRC材料的吸湿老化过程对辛本征解表达式的影响,并详细讨论了老化时间、纤维含量和几何参数对NFRC圆柱壳屈曲行为的影响。     

湿热环境中复合材料层合圆柱薄壳的屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响.基于细观力学模型复合材料性能与湿度和温度变化有关.壳体控制方程基于经典层合壳理论,并包括湿热效应.壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径.分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响.数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为.讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响.     

Local buckling of compressed elements of layered viscoelastic material

The problem of local surface buckling of compressed elements of layered material is solved using the equations of the theory of multilayer plates [1, 2, 5]. The local buckling deformations are described by means of the solutions of differential-difference equations damping into the interior of the medium. The effect of compressive forces, buckling wavelength, and the elastic and viscoelastic constants of the material on the behavior of the deformations and on the thickness of the layer to which significant buckling extends is investigated. Numerical estimates are presented for the buckling parameters of compressed laminated-plastic elements.Moscow Power Engineering Institute. Translated from Mekhanika Polimerov, Vol. 4, No. 5, pp. 816–821, September–October, 1968.     

Buckling shapes and hypercritical stressed state of viscoelastic shells

The buckling of shells of various thicknesses made from materials subject to nonlinear creep was studied experimentally. The distribution of the characteristic buckling shapes was established by spectral [harmonic] analysis. On the basis of the fundamental cubic theory of viscoelasticity [7], relationships are derived for determining the stress tensor components from the experimental deflection functions, with due allowance for various time factors. The stressed state of the test shells is analyzed. In approximating the deflection and stress functions use is made of a Fourier series in complex form.