Aqueous polymerization of acrylamide initiated by cerium (IV)–ethylenediamine tetraacetic acid redox system

Ethylenediamine tetraacetic acid (EDTA) terminated polyacrylamide was obtained by using the EDTA–cerium(IV) ammonium nitrate [Ce(IV)] redox initiator in the aqueous polymerization of acrylamide. The polymerization behaviors as a function of the concentration of Ce(IV), EDTA, and acrylamide as well as temperature were studied. The consumption rate of cerium(IV) depends a first-order reaction on the ceric ion concentration ([Ce(IV)]). The complex formation constant (K) and disproportionation constant (k_d) of Ce(IV)–EDTA chelated complex are 1.67 × 10⁴ and 3.77 × 10^?3, respectively. The rate dependences of polymerization on monomer concentration and EDTA concentration both follow a second-order reaction in the run of initial monomer concentration ([M]_i) equal to 0.2 mol dm^?3. The number average molecular weight increases linearly with the ratio of [M]_i/[Ce(IV)]_i. The mechanism and kinetics for the polymerization was proposed. The kinetic parameters involved were determined. © 1992 John Wiley & Sons, Inc.     

Aqueous polymerization of methyl methacrylate initiated by the redox system Ce(IV)–isopropyl alcohol. Kinetics and molecular weight

Polymerization of methyl methacrylate was carried out in aqueous nitric acid in the temperature range 26–40°C, with the redox initiator system ceric ammonium nitrate–isopropyl alcohol. A short induction period was observed, as well as the attainment of a limiting conversion, and the total ceric ion consumption with reaction time. The reaction orders were 1/2 and 3/2 with respect to the IPA and monomer concentration, respectively, within the range (3–5) × 10^?3M of Ce(IV). But at lower Ce(IV) concentration (≤ 1 × 10^?3M), the order with respect to monomer and Ce(IV) changed to 1 and 1/2, respectively. The rate of ceric ion disappearance was first order with respect to Ce(IV) concentration and (R_Ce)^?1 was proportional to [IPA]^?1. Both the rate of polymerization and the rate of ceric ion consumption increase with rise in temperature. The average-molecular weight can be controlled by variations in IPA, Ce(IV), and monomer concentrations, and in temperature. A kinetic scheme involving oxidation of IPA by Ce(IV) via complex formation, whose decomposition gives rise to a primary radical, initiation, propagation, and termination of the polymeric radicals by bimolecular interaction is proposed. An oxidative termination of primary radicals by Ce(IV) is also included.     

Polymerization of acrylonitrile initiated by ceric ion–citric acid redox system

Heterogeneous polymerization of acrylonitrile initiated by ceric ammonium sulfate–citric acid (C.A.) redox system is reported at 35 ± 0.2°C under nitrogen atmosphere. The rate of monomer disappearance is found to be proportional to [C.A.]⁰, [Ce⁴⁺]^0.63, and [Monomer]^1.59. The rate of ceric ion disappearance is directly proportional to ceric ion concentration but independent of monomer concentration. The initial rate was independent of [H₂SO₄]. The molecular weight of polyacrylonitrile increases with increasing monomer concentration and decreasing ceric ion concentration. Activation energy was found to be 27.9 kJ/mol.     

Polymerization of Methacrylamide Initiated by Ceric Ion-Citric Acid Redox System

Homogeneous polymerization of methacrylamide initiated by the ceric ammonium sulfate-citric acid (CA) redox pair has been investigated and reported at 35 ± 0.2°C under nitrogen atmosphere. The initiation was caused by the free radical generated by the decomposition of the complex formed between ceric ion and citric acid. The rate of monomer disappearance was found to be proportional to [CA]^0.4, [Ce^0.4+]^0.65, and [Monomer]¹ The rate of ceric ion disappearance was directly proportional to the ceric ion concentration but independent of the monomer concentration. The initial rate was independent of [H₂SO₄]. The activation energy of the system was found to be 21.4 kJ/mol.     

Studies on the kinetics of ceric–thiourea-initiated aqueous polymerization of methyl methacrylate. I. Mechanistic features in moderately acid solution

The kinetics of the aqueous polymerization of methyl methacrylate by a ceric-thiourea initiator system in moderately acid solution (pH 2.15) was studied. The rate of polymerization was proportional to 0.41 power of ceric concentration, 0.32 power of thiourea concentration, and 1.18 power of monomer concentration. The degree of polymerization was smaller than expected from the rate of polymerization. Initiation efficiency was less than one. There was no evidence of any ceric ion termination in the concentration range of 2.50 × 10^?4–2.00 × 10^?3M studied. The results are explained in terms of partial primary radical termination; the principal mode of termination, however, was bimolecular.     

Graft polymerization kinetics of acrylamide initiated by ceric nitrate–dextran redox systems

The kinetics of the graft polymerization of acrylamide initiated by ceric nitrate—dextran polymeric redox systems was studied primarily at 25°C. Following an initial period of relatively fast reaction, the rate of polymerization is first-order with respect to the concentrations of monomer and dextran and independent of the ceric ion concentration. The equilibrium constant for ceric ion—dextran complexation K is 3.0 ± 1.6 l./mole, the specific rate of dissociation of the complex, k_d, is 3.0 ± 1.2 × 10^?4 sec.^?1, and the ratio of polymerization rate constants, k_p/k_t, is 0.44 ± 0.15. The number-average degree of polymerization is directly proportional to the ratio of the initial concentrations of monomer and ceric ion and increases exponentially with increasing extent of conversion. The initial rapid rate of polymerization is accounted for by the high reactivity of ceric ion with cis-glycol groups on the ends of the dextran chains. The polymerization in the slower period that follows is initiated by the breakdown of coordination complexes of ceric ions with secondary alcohols on the dextran chain and terminated by redox reaction with uncomplexed ceric ions.     

Polymerization of acrylamide initiated by the Ce4+/thiourea redox system

The polymerization of acrylamide (M) initiated by the Ce⁴⁺/thiourea (TU) redox system has been studied in an aqueous sulfuric acid medium at 35 ± 0.2°C under nitrogen atmosphere. The rate of polymerization is governed by the expression The activation energy is 5.9 kcal deg^?1 mol^?1 in the investigated temperature range 30–50°C. The molecular weight is directly proportional to the concentration of monomer and inversely proportional to the catalyst concentration. With increasing concentration of DMF molecular weight decreases. The range of concentrations for which these observations hold at sulfuric acid concentration of 2.5 × 10^?2 mol/L are [monomer] = 5.0 × 10^?2–3.0 × 10^?1, [catalyst] = (5.0–15.0) × 10^?4, and [activator] = (1.0–6.0) × 10^?3 mol/L.     

Construction and Application of Flow Enzymatic Biosensor Based of Silver Solid Amalgam Electrode for Determination of Sarcosine

In this paper, the flow amperometric enzymatic biosensor based on polished silver solid amalgam electrode for determination of sarcosine in model sample under flow injection analysis conditions is presented. The biosensor works on principle of electrochemical detection of oxygen decrease during enzymatic reaction which is directly proportional to the concentration of sarcosine in sample. The whole preparation process takes about 3 h. The RSD of repeatability of 10 consecutive measurements is 1.6 % (c_sarcosine=1.0×10^?4 mol dm^?3). Under optimal conditions the calibration dependence was linear in the range 7.5×10^?6–5.0×10^?4 mol dm^?3 and limit of detection was 2.0×10^?6 mol dm^?3.     

Investigation of the kinetics of formation of 1 : 1 complex between chromium(III) with 1,3-propanediamine-N,N′-diacetate-N,N′-di-3-propionate ion in aqueous acidic media

The kinetics of formation of the 1?:?1 complex of chromium(III) with 1,3-propanediamine-N,N′-diacetate-N,N′-di-3-propionate (1,3-pddadp) were followed spectrophotometrically at λ _max?=?557?nm. The reaction was first-order in chromium(III). Increasing the 1,3-pddadp concentration from 2.2?×?10^?2 to 0.11?mol?dm^?3 accelerated the reaction rate. Increasing the hydrogen ion concentration from 1.995?×?10^?5 to 6.31?×?10^?4 mol?dm^?3 retarded the reaction rate. The reaction rate was also retarded by increasing ionic strength and dielectric constant of the reaction medium. A mechanism was suggested to account for the results obtained which involves ion-pair formation between the various reactants. Values of 22?kJ?mol^?1 and ?115?J?K^?1 mol^?1 were obtained for the energy and the entropy of activation, respectively, which indicate an associative mechanism. The logarithm of the formation constant of the 1?:?1 complex formed was 11.3.     

Direct determination of traces of silver in mercury by voltammetry at the hanging mercury drop electrode in acetonitrile medium

A direct method for the determination of silver in mercury is described. The sample of mercury is introduced into the container of the hanging mercury drop electrode and the anodic voltammograms are recorded in a 0.1 M lithium perchlorate solution in acetonitrile. The anodic peak of silver obtained under these conditions is well separated from the mercury dissolution current. The peak height is proportional to silver concentration over the wide range 2 × 10^?6 mol dm^?3 (1.6 × 10^?6%) to at least 2.0 × 10^?2 mol dm^?3. No prior separation is needed; the procedure requires less than 20 min. The diffusion coefficient of silver in mercury was determined at several temperatures. It was found that silver in mercury does not form intermetallic compounds with copper, lead, thallium, cadmium, tin and bismuth.     

Application of Non‐Stop‐Flow Differential Pulse Voltammetry at a Tubular Detector of Silver Solid Amalgam for Electrochemical Determination of Lomustine (CCNU)

An application of the flow differential pulse voltammetry with tubular detector based on silver solid amalgam for determination of antineoplastic drug lomustine in pharmaceutical preparations is presented. The highest sensitivity was obtained in [0.10 mol dm^?3 MES; 2.00 mol dm^?3 NaCl; pH 6.0]:EtOH (9 : 1) with flow rate 0.50 mL min^?1, and the magnitude of the modulation amplitude ?0.070 V. The calibration dependence was linear in the range 1×10^?6–1 × 10^?4 mol dm^?3 (R²=0.999). The limit of detection was 1.5×10^?7 mol dm^?3. This method was successfully used for determination of lomustine in real samples of chemotherapy drug CeeNU Lomustine 40 mg.     

Kinetics of Aqueous Polymerization of Acrylamide Initiated by Ceric Ammonium Sulfate/2-Mercaptoethanol Redox System

Polymerization of acrylamide monomer, initiated by the redox system involving acidified ceric ammonium sulfate and 2-mercaptoethanol (2-ME) was carried out in an aqueous medium at 25° C. White, rigid polyacrylamide, isolated under controlled experimental conditions, showed a molecular weight of 1.5 × 10⁴ from viscosity measurements. The rate of monomer (M) conversion to polymer was found to be proportional to [M]^1.5, [2-ME]^0.5, and [Ce(IV)]^0.4. Further, the rate of disappearance of ceric ion was observed to be directly proportional to [2-ME] and independent of [M] in the range of 0.16–0.48 mole/liter. The explanation of the above proportionalities is given in terms of a proposed reaction mechanism. Values of the usual rate constants, k_r, k₀/k_t and k_t./k_p ^½ have been computed.     

Binding of Copper(II) to Pectins by Electrochemical Methods

The interaction between Cu(II) and pectin extracted from citrus fruit was studied in KNO₃ 0.10 mol dm^?3 at 25 °C and pH 5.5, using ion selective electrode potentiometry and voltammetry, namely differential pulse polarography and square‐wave voltammetry. Although many independent variables may affect Cu(II)‐polymer interactions such as charge density, polymer concentration and copper to polymer concentration ratio, a good fitting was observed for the model with ML and ML₂ complex species, when M:L total concentration (mol dm^?3) ratio varies from 0.2 to 2.7 and the ligand concentration is in the range (0.2 to 1) g dm^?3, i.e., (0.4 to 2)×10^?3 mol COO^? dm^?3. The complex parameters found in these conditions were log β_CuL=3.5±0.1 and log β_CuL2= 8.0±0.2. For lower total ligand and total metal ion concentrations, used in voltammetry, the interaction Cu(II)‐pectin is affected by a cooperative mode (increase of metal ion‐ligand affinity) when the total metal ion concentration increases and by an anti‐cooperative mode when the total ligand concentration increases, possibly due to different conformations of the polymer.     

Tubular Detector of Silver Solid Amalgam for Electrochemical Measurements in Flow Systems

This paper presents the application of the tubular detector based on silver solid amalgam (TD‐AgSA) for electrochemical determinations of reducible inorganic (Cd²⁺, Zn²⁺) and organic (4‐nitrophenol) compounds under flow injection analysis conditions. The newly developed TD‐AgSA is simple, robust and inexpensive. The limits of detections of Zn²⁺, Cd²⁺ and 4‐nitrophenol are 1.4×10^?6, 7.0×10^?7, and 5.0×10^?7 mol dm^?3, respectively (i.e. 0.09, 0.08 and 0.07 ppm). The obtained results proved the long‐term stability of the detector (RSD of the determination of Zn²⁺, Cd²⁺, and 4‐nitrophenol were 0.8, 0.9 and 0.8 % (n=10; c_Zn=7.7×10^?5 mol dm^?3, c_Cd=4.5×10^?5 mol dm^?3 and c_4‐NPh=3.6×10^?5 mol dm^?3), respectively and its applicability for cathodic measurements in aqueous solutions at potentials up to ?2 V.     

Complex Formation of Hematoporphyrin with Cyclodextrins and 1,1′-Diheptyl-4,4′-bipyridinium Dibromide in Aqueous Solutions

At around 5×10^-6?mol?dm^-3 of hematoporphyrin (HP), an HP dimer exists as well as an HP monomer. The equilibrium constant for the dimerization of HP in pH 10.0 buffer has been evaluated to be 1.70×10⁵?mol^-1?dm³ from the HP concentration dependence of the absorption spectrum. In aqueous solution, HP forms 1:1 inclusion complexes with β-cyclodextrin (β-CD), γ-cyclodextrin (γ-CD), and heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin (TM-β-CD). The fluorescence of HP is significantly enhanced by the addition of CDs. From simulations of the fluorescence intensity changes, the equilibrium constants for the formation of the CD–HP inclusion complexes have been estimated to be 200, 95.7, and 938?mol^-1?dm³ for β-CD, γ-CD, and TM-β-CD, respectively. HP forms a 1:1 complex with 1,1′-diheptyl-4,4′-bipyridinium dibromide (DHB) in aqueous solution. In contrast to the addition of CDs, the HP fluorescence is significantly quenched by the addition of DHB. The equilibrium constant for the formation of the HP–DHB complex has been evaluated to be 1.98×10⁵?mol^-1?dm³ from the fluorescence intensity change of HP. The addition of DHB to an HP solution containing β-CD induces a circular dichroism signal of negative sign, indicating the formation of a ternary inclusion complex involving β-CD, HP, and DHB. In contrast, there is no evidence for the formation of a ternary inclusion complex of HP with DHB and TM-β-CD.     

Carbonate ion electrode based on HTPP sites

Several quaternary phosphonium salts have been used as the site materials for construction of carbonate ion electrodes. Among them the electrode based on hexadecyltriphenylphosphonium salt showed best performance characteristics. The Nerstian response range of the electrode is from 1 × 10^?2 down to 6.3 × 10^?7 mol · dm^?3 with a detection limit of 1.8 × 10^?7 mol · dm³. The selectivity order of ions can be altered by the introduction of trifluoroacetyl-tert-butylbenzene as a solvent mediator. The strong solvatoin of the primary ion of interest in the membrane phase by the solvent mediator favors the improvement of the selectivity of the proposed electrode.     

Polymerization of acrylamide with ceric ion–malic acid redox pair

The polymerization of acrylamide (M) in aqueous sulfuric acid medium initiated with ceric ammonium sulfate–malic acid redox pair was investigated at 35 ± 0.2°C under nitrogen atmosphere. The initiation was caused by the free radical generated by the decomposition of the complex formed between ceric ion and malic acid (MA). The rate of monomer disappearance was proportional to the first power of malic acid, ceric ion, and monomer concentrations at lower ceric ion concentrations. However, at higher ceric ion concentrations the rate was independent of [Ce(IV)]. The rate of ceric ion disappearance was proportional to [MA] and [Ce(IV)] but independent of [M] at lower ceric ion concentrations. The activation energy was found to be 57.74 kJ/mol. Sulfuric acid retarded the reaction. Molecular weights increased with increasing [M] and decreasing [Ce(IV)].     

Free‐radical trapping in the precipitation polymerization of acrylamide

Electron spin resonance spectroscopy revealed that some free radicals were trapped in the precipitated polymer during the precipitation polymerization of acrylamide conducted in nonsolvents of the polymer [t‐butyl alcohol (TBA), acetone and methanol]. The trapped radical concentration decreased with an increase in the chain‐transfer activity of the aforementioned liquids. A 100% polymerized acrylamide in TBA prepared with a 10% monomer concentration and a 3 × 10^?3 mol/dm³ azobisisobutyronitrile concentration at 50 °C contained approximately 2 radicals per 100 polymer molecules. The trapped radicals on exposure to air decayed with time according to second‐order kinetics. The rate constant was evaluated and found to be in reasonably good agreement with the rate constant evaluated from data published long ago for the decay of trapped polyacrylonitrile radicals following their exposure to air. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1192–1197, 2003     

Direct determination of bismuth(III) in sea water by square-wave anodic stripping voltammetry at a glassy-carbon rotating-disk electrode

A method for the determination of bismuth(III) in untreated sea water at its natural pH of 8.1 is described. A bare glassy-carbon rotating-disk electrode is preconditioned by placing in the sample at an applied potential of ?0.8 V vs. Ag/AgCl for 20 min; after stripping to ?0.4 V, bismuth is accumulated for 5 min at ?0.8 V and finally stripped in the square-wave mode. The bismuth peak appears at ca. + 0.10 V vs. Ag/AgCl; peak height is linearly related to concentration up to 2×10^?10 mol dm^?3. The method is highly selective for bismuth. The concentration of Bi(III) in the investigated sample was (6±1)×10^?11 mol dm^?3, or 12±2 ng dm^?3. The different types of response obtained are discussed.     

Electrochemical reduction behaviour of the synthetic pyrethroid insecticide cyfluthrin and its determination in formulations and environmental samples

The polarographic behaviour of cyfluthrin (CY), an α-cynoester pyrethroid, was studied using a dropping mercury electrode and hanging mercury drop electrode in methanolic Britton–Robinson (B–R) buffer of pH 2.0–12.0 with different ionic media. The nature of the electrode process was examined, the number of electrons was evaluated, and the reduction mechanism was proposed. Quantitative determination was achieved in the concentration range of 6.0?×?10^?8 to 1.15?×?10^?5?mol?dm^?3 using a differential pulse polarographic method with a lower detection limit of 2.4?×?10^?8?mol?dm^?3. The proposed method was successfully applied in the determination of CY in formulations, grains, soils, and spiked water samples.