水热法可控合成二氧化钛纳米晶及其在染料敏化太阳能电池中的应用

本文报道了水热法可控合成二氧化钛纳米晶及其在染料敏化太阳能电池中的应用.选择合适的有机碱胶化剂,能很好地控制二氧化钛纳米晶的生长,形成不同形貌和粒径的锐钛矿型二氧化钛纳米晶颗粒.染料敏化太阳能电池光电性能测试结果表明,以四乙基氢氧化铵为胶化剂合成的边长为8～13nm的正方形二氧化钛纳米晶构成的光阳极光电性能优于以四丁基氢氧化铵为胶化剂合成的边长为7～10nm的正方形二氧化钛纳米晶以及长18～35nm,宽10～18nm的长方形二氧化钛纳米晶构成的光阳极.用较高浓度的四甲基氢氧化铵胶化剂能合成球形或椭球形亚微米级二氧化钛颗粒,以其为散射中心在光阳极中构建散射层,染料敏化太阳能电池的光电转换效率能由6.77%提高到8.18%.     

Hierarchical TiO(2) flowers built from TiO(2) nanotubes for efficient Pt-free based flexible dye-sensitized solar cells

A novel hierarchical TiO(2) flower consisting of anatase TiO(2) nanotubes on a Ti foil substrate has been prepared via a mild hydrothermal reaction of TiO(2) nanoparticles/Ti foil. The photovoltaic performance of DSSC based on hierarchical TiO(2) flowers/Ti (7.2%) is much higher than that of TiO(2) nanoparticle/Ti (6.63%) because of its superior light scattering ability and fast electron transport. Moreover, full flexible DSSC based on the novel hierarchical TiO(2) flowers/Ti foil photoelectrode and electrodeposited poly(3,4-ethylenedioxythiophene) (PEDOT) on indium tin oxide-coated poly(ethylene terephthalate) (ITO-PET) counter electrode shows a significant power conversion efficiency of 6.26%, accompanying a short-circuit current density of 11.96 mA cm(-2), an open-circuit voltage of 761 mV and a fill factor of 0.69.     

SnO2/TiO2复合纳米纤维的制备及光催化性能

采用静电纺丝技术,以聚乙烯吡咯烷酮和钛酸正丁酯为前驱体,制得锐钛矿相TiO2纳米纤维。以TiO2纳米纤维为模板,通过水热合成法,制备了具有异质结构的SnO2/TiO2复合纳米纤维。利用扫描电镜(SEM)、X射线能量色散光谱（EDS）、透射电镜(TEM)和X射线衍射(XRD)等分析测试手段对其形貌和结构进行了表征,结果表明,SnO2纳米粒子均匀地生长在TiO2纳米纤维表面,形成了异质结构的SnO2/TiO2复合纳米纤维材料。通过改变反应物浓度,能有效地实现SnO2/TiO2复合纳米纤维的可控合成。以罗丹明B为模拟污染物,考察了SnO2/TiO2复合纳米纤维的光催化性能,与纯TiO2纳米纤维相比光催化活性明显提高,初步探讨了光催化反应机理。     

Synthesis and growth mechanism of titanate and titania one-dimensional nanostructures self-assembled into hollow micrometer-scale spherical aggregates

Three-dimensional, dendritic micrometer-scale spheres of alkali metal hydrogen titanate 1D nanostructures (i.e., nanowires and nanotubes) have been generated using a modified hydrothermal technique in the presence of hydrogen peroxide and an alkali metal hydroxide solution. Sea-urchin-like assemblies of these 1D nanostructures have been transformed into their hydrogen titanate analogues (lepidocrocite HxTi2-x/4squarex/4O4 (x approximately 0.7, square: vacancy)) by neutralization as well as into their corresponding anatase TiO2 nanostructured counterparts through a moderate high-temperature annealing dehydration process without destroying the 3D hierarchical structural motif. The as-prepared hollow spheres of titanate and titania 1D nanostructures have overall diameters, ranging from 0.8 to 1.2 microm, while the interior of these aggregates are vacuous with a diameter range of 100 to 200 nm. The constituent, component titanate and TiO2 1D nanostructures have a diameter range of 7+/-2 nm and lengths of up to several hundred nanometers. A proposed two-stage growth mechanism of these hollow micrometer-scale spheres was supported by time-dependent scanning electron microscopy, atomic force microscopy, and inductively coupled plasma atomic emission spectrometry data. We have also demonstrated that these assemblies are active photocatalysts for the degradation of synthetic Procion Red dye under UV light illumination.     

电泳法制备TiO_2纳米管/纳米颗粒复合薄膜的电化学阻抗谱分析(英文)

由于一维(1D)氧化钛纳米结构具有提高染料敏化太阳能电池(DSCs)中的电子传输性能从而进一步提高电池性能的特性,该领域吸引了越来越多研究者的关注.但是一维氧化钛纳米结构如何影响电子传输性能却少有报道.本研究利用电化学阻抗谱(EIS)分析来探索氧化钛纳米颗粒和纳米管复合薄膜的电子传输特性.使用两种不同尺寸(25和100nm)的纳米颗粒和纳米管作为原料,采用电泳沉积方法制备了氧化钛复合薄膜并研究了原料的组成对染料敏化电池的影响以获得最佳的组成.研究结果表明,在大颗粒的质量分数低于20%时,大颗粒的掺入有利于改善氧化钛薄膜的电子传递与电池性能.与完全由颗粒组成的薄膜相比,纳米管的加入有利于电子在氧化钛薄膜里的传输.纳米管、100nm颗粒及25nm颗粒的最佳质量比例为20:16:64.     

Effect of the rutile content on the photovoltaic performance of the dye-sensitized solar cells composed of mixed-phase TiO2 photoelectrodes

The effect of the rutile content on the photovoltaic performance of dye-sensitized solar cells (DSSCs) composed of mixed-phase TiO(2) photoelectrode has been investigated. The mixed-phase TiO(2) particles with varied amounts of rutile, relative to anatase phase, are synthesized by an in situ method where the concentration of sulfate ion is used as a phase-controlling parameter in the formation of TiO(2) using TiCl(4) hydrolysis. The surface area (S(BET)) varies from 33 (pure rutile) to 165 (pure anatase) m(2) g(-1). Generally, both the current density (J(sc)) and photo-conversion efficiency (η) decrease as the rutile content increases. The incorporation of rod-shaped rutile particles causes low uptake of dye due to the reduced surface area, as well as slow electron transport in less efficiently-stacked structure. However, maximum J(sc) (14.63 mA cm(-2)) and η (8.69%) appear when relatively low rutile content (16%) is employed. The reported synergistic effect by the efficient interparticle electron transport from rutile to anatase seems to overbalance the decrease of surface area when small amount of rutile particles is incorporated.     

Synthesis of nano-TiO2 assisted by diethylene glycol for use in high efficiency dye-sensitized solar cells

The performance of dye-sensitized solar cells(DSSCs) consisting of anatase TiO_2 nanoparticles that were synthesized via a hydrothermal method was studied.The synthesized TiO_2 nanoparticles were characterized by X-ray diffraction(XRD),nitrogen sorption analysis,scanning electron microscopy(SEM),high resolution transmission electron microscopy(HRTEM),and UV-vis spectroscopy.Then the J-Vcurve,electrochemical impedance spectroscopy(EIS),and open-circuit voltage decay(OCVD) measurement were applied to evaluate the photovoltaic performance of DSSCs.Compared with the commercial TiO_2nanoparticles(P25),the synthesized-TiO_2 nanoparticles showed better performance.By adding diethylene glycol(DEG) before the hydrothermal process,the synthesized TiO_2 nanoparticles(hereafter referred to as TiO_2-DEG particles) shows narrower size distribution,larger specific surface area,higher crystallinity,and less surface defects than TiO_2(DEG free) particles.The analysis of photovoltaic properties of DSSCs based on TiO_2-DEG particles showed that the recombination of electron-hole pairs was decreased and the trapping of carries in grain boundaries restrained.It was believed that the photoelectrode fabricated with the as-prepared TiO_2 nanoparticles improved the loading amount of dye sensitizers(N719).and enhanced the photocurrent of the DSSCs.As a result,the TiO_2-DEG particle based cells achieved a photo-to-electricity conversion efficiency(η) of 7.90%,which is higher than 7.53%for the cell based on TiO2(DEG free) and 6.59%for the one fabricated with P25.     

Real time observation of the hydrothermal crystallization of barium titanate using in situ neutron powder diffraction.

The hydrothermal crystallization of barium titanate, BaTiO3, has been studied in situ by time-resolved powder neutron diffraction methods using the recently developed Oxford/ISIS hydrothermal cell. This technique has allowed the formation of the ferroelectric ceramic to be followed in a noninvasive manner in real time and under genuine reaction conditions. In a first set of experiments, Ba(OD)2-8D2O was reacted with two different titanium sources, either crystalline TiO2 (anatase) or amorphous TiO2-H2O in D2O, at 100-140 degrees C and the reaction studied using the POLARIS time-of-flight neutron powder diffractometer, at the ISIS Facility. In a second series of experiments, the reaction between barium chloride and crystalline TiO2 (anatase) in NaOD/D2O was studied at temperatures between 100 and 200 degrees C and at different deuterioxide concentrations using the constant-wavelength D20 neutron powder diffractometer at the Institut Laue Langevin. Quantitative growth and decay curves were determined from analysis of the integrated intensities of Bragg reflections of starting materials and product phases. In both sets of experiments the rapid dissolution of the barium source was observed, followed by dissolution of the titanium source before the onset of crystallization of barium titanate. Using a nucleation-growth model we are able to simulate the growth curve of barium titanate at three temperatures. Our results indicate the predominance of a homogeneous dissolution-precipitation mechanism for the hydrothermal formation of barium titanate, rather than other possible mechanisms that have been discussed in the literature. Analysis of the line widths of the Bragg reflections in the neutron diffraction data indicates that the particle size of the BaTiO3 product phase prepared from the amorphous TiO2-H2O is smaller than that prepared from crystalline TiO2 (anatase).     

Facile synthesis of TiO2 inverse opal electrodes for dye-sensitized solar cells

Engineering of TiO(2) electrode layers is critical to guaranteeing the photoconversion efficiency of dye-sensitized solar cells (DSSCs). Recently, a novel approach has been introduced for producing TiO(2) electrodes using the inverted structures of colloidal crystals. This paper describes a facile route to producing ordered macroporous electrodes from colloidal crystal templates for DSSCs. Using concentrated colloids dispersed in a volatile medium, the colloidal crystal templates were obtained within a few minutes, and the thickness of the template was easily controlled by changing the quantity of colloidal solution deposited. Here, the effects of the structural properties of the inverse opal TiO(2) electrodes on the photovoltaic parameters of DSSCs were investigated. The photovoltaic parameters were measured as a function of pore ordering and electrode film thickness. Moreover, DSSC applications that used either liquid or viscous polymer electrolyte solutions were investigated to reveal the effects of pore size on performance of an inverse opal TiO(2) electrode.     

Rational design of 3D dendritic TiO2 nanostructures with favorable architectures

Controlling the morphology and size of titanium dioxide (TiO(2)) nanostructures is crucial to obtain superior photocatalytic, photovoltaic, and electrochemical properties. However, the synthetic techniques for preparing such structures, especially those with complex configurations, still remain a challenge because of the rapid hydrolysis of Ti-containing polymer precursors in aqueous solution. Herein, we report a completely novel approach-three-dimensional (3D) TiO(2) nanostructures with favorable dendritic architectures-through a simple hydrothermal synthesis. The size of the 3D TiO(2) dendrites and the morphology of the constituent nano-units, in the form of nanorods, nanoribbons, and nanowires, are controlled by adjusting the precursor hydrolysis rate and the surfactant aggregation. These novel configurations of TiO(2) nanostructures possess higher surface area and superior electrochemical properties compared to nanoparticles with smooth surfaces. Our findings provide an effective solution for the synthesis of complex TiO(2) nano-architectures, which can pave the way to further improve the energy storage and energy conversion efficiency of TiO(2)-based devices.     

基于铝离子掺杂二氧化钛薄膜的染料敏化太阳能电池的光电性能

采用水热法制备出Al3+掺杂二氧化钛薄膜,通过玻璃棒涂于导电玻璃上,在450°C的温度下烧结并将其用N3染料敏化制成染料敏化太阳能电池(DSSCs).通过X射线光电子能谱(XPS)、X射线衍射(XRD)、扫描电镜(SEM)及DSSCs测试系统对其进行了测试表征,研究了Al3+掺杂对TiO2晶型及染料敏化太阳能电池的光电性能影响.XPS数据显示Al3+成功掺杂到了TiO2晶格内,由于Al3+的存在,对半导体内电子和空穴的捕获及阻止电子/空穴对的复合发挥重要作用.莫特-肖特基曲线显示掺杂Al3+后二氧化钛平带电位发生正移,并导致电子从染料注入到TiO2的驱动力提高.DSSCs系统测试结果表明,Al3+掺杂的TiO2薄膜光电效率达到6.48%,相对于无掺杂的纯二氧化钛薄膜光电效率(5.58%),其光电效率提高了16.1%,短路光电流密度从16.5mA·cm-2提高到18.2mA·cm-2.     

Hollowing Sn-doped TiO2 nanospheres via ostwald ripening

The well-known physical phenomenon Ostwald ripening in crystal growth has been widely employed in template-free fabrication of hollow inorganic nanostructures in recent years. Nevertheless, all reported works so far are limited only to stoichiometric phase-pure solids. In this work we describe the first investigation of doped (nonstoichiometric) materials using Ostwald ripening as a means of creating interior space. In particular, we chose the xSnO2-(1 - x)TiO2 binary system to establish preparative principles for this approach in synthesis of structurally and compositionally complex nanomaterials. In this study, uniform Sn-doped TiO2 nanospheres with hollow interiors in 100% morphological yield have been prepared with an aqueous inorganic route under hydrothermal conditions. Furthermore, our structural and surface analyses indicate that Sn4+ ions can be introduced linearly into TiO2, and preferred structural phase(s) can also be attained (e.g., either anatase or rutile, or their mixtures). Fluoride anions of starting reagents are adsorbed on the surface sites of oxygen. The resultant anion overlayer may contribute to stabilization of surface and creation of repulsive interaction among the freestanding nanospheres. On the basis of these findings, we demonstrate that Ostwald ripening can now be employed as a general hollowing approach to architect interior spaces for both simple and complex nanostructures.     

Reconstruction of the (001) surface of TiO2 nanosheets induced by the fluorine-surfactant removal process under UV-irradiation for dye-sensitized solar cells

The champion dye-sensitized solar cells (DSSCs) based on TiO(2) nanoparticles nearly reach the limit of photo-current density using the black dye or zinc porphyrin dye as sensitizer. However, the way to make ordinary DSSCs more efficient as well as to understand the mechanism is still essential. Here we present an elegant UV irradiation treatment of TiO(2) nanosheets to enhance the performance of DSSCs based on the TiO(2) nanosheets via room temperature removal of inorganic surfactants and reconstruction of the (001) surface of TiO(2) nanosheets, killing two birds with one stone. UV irradiation was utilized to remove the fluorine-surfactant on the surface of anatase TiO(2) nanosheets with a high percentage of exposed {001} facets which were synthesized with the aid of hydrofluoric acid. The nanosheets treated with UV irradiation for 40 min had the advantage of improving the photoelectric conversion efficiency of DSSCs by 17.6%, compared to that without UV treatment when they were introduced into DSSCs as photoanode materials. The improved efficiency was ascribed to more dye adsorption. A theoretical calculation proposed that UV irradiation induced microfaceted steps on the TiO(2) surface by two domain (1 × 4) reconstruction after UV irradiating the (1 × 1) (001) surface. The microfaceted steps increase the active surface area of the TiO(2) nanosheets by increasing the exposure of titanium atoms and engendering active sites.     

WO3/TiO2 复合纤维的制备及储能光催化性能

以钛酸正丁酯为前驱体, 采用静电纺丝技术制得了纯锐钛矿TiO2纤维, 并以其为基质, 通过水热法制备了具有异质结构的WO3/TiO2复合纤维. 利用X射线衍射仪(XRD)、 扫描电子显微镜(SEM)、 能量色散光谱仪(EDS)、 透射电子显微镜(TEM)和高分辨透射电子显微镜(HRTEM)等对样品的结构和形貌进行了表征. 以罗丹明B的脱色降解为模型反应, 考察了样品的光催化性能和储能光催化性能. 结果表明, 花状WO3微球包裹在TiO2纤维上, 得到了具有异质结构的WO3/TiO2复合纤维光催化剂. WO3与TiO2复合有利于光生载流子的输运和分离, 增强了体系的量子效率, 提高了光催化活性. WO3/TiO2 复合纤维经光照处理后, 在黑暗条件下显示出储能光催化特性.     

单晶二氧化钛纳米线的制备及其在柔性染料敏化太阳能电池中的应用

采用强碱水热法制备单晶二氧化钛纳米线(SCTNW),在高压高温和强碱作用下,二氧化钛颗粒的(010)晶面被NaOH溶液侵蚀,生成钛酸钠(Na2Ti4O9);经过酸洗后,生成钛酸水合物(H2Ti4O9·H2O),钛酸水合物之间通过氢键连接成线状;烧结失水后,最终形成SCTNW.通过透射电子显微镜(TEM)、选区电子衍射(SAED)、X射线能量散射谱(EDS)和X射线衍射(XRD)等手段进行表征和测试,分析了SCTNW的形成过程,探讨了水热时间对SCTNW形成的影响;将获得的SCTNW共混在二氧化钛纳米颗粒的胶体中,采用刮涂法在柔性钛箔上制备了染料敏化太阳能电池(DSSC)光阳极,通过扫描电子显微镜(SEM)、交流阻抗谱(EIS)、紫外-可见(UV-Vis)分光光度计和电池光电性能等表征和测试,探讨了SCTNW的共混量对柔性DSSC光电性能的影响.实验结果表明:当共混7.5%(w)的SCTNW时,所制备的柔性DSSC在100mW·cm-2模拟太阳光照下,光电转换效率达到6.48%.     

Phase transition between nanostructures of titanate and titanium dioxides via simple wet-chemical reactions

Titanate nanofibers of various sizes and layered structure were prepared from inorganic titanium compounds by hydrothermal reactions. These fibers are different from "refractory" mineral substances because of their dimension, morphology, and significant large ratio of surface to volume, and, surprisingly, they are highly reactive. We found, for the first time, that phase transitions from the titanate nanostructures to TiO(2) polymorphs take place readily in simple wet-chemical processes at temperatures close to ambient temperature. In acidic aqueous dispersions, the fibers transform to anatase and rutile nanoparticles, respectively, but via different mechanisms. The titanate fibers prepared at lower hydrothermal temperatures transform to TiO(2) polymorphs at correspondingly lower temperatures because they are thinner, possess a larger surface area and more defects, and possess a less rigid crystal structure, resulting in lower stability. The transformations are reversible: in this case, the obtained TiO(2) nanocrystals reacted with concentrate NaOH solution, yielding hollow titanate nanotubes. Consequently, there are reversible transformation pathways for transitions between the titanates and the titanium dioxide polymorphs, via wet-chemical reactions at moderate temperatures. The significance of these findings arises because such transitions can be engineered to produce numerous delicate nanostructures under moderate conditions. To demonstrate the commercial application potential of these processes, we also report titanate and TiO(2) nanostructures synthesized directly from rutile minerals and industrial-grade rutiles by a new scheme of hydrometallurgical reactions.     

Preparation of controllable crystalline titania and study on the photocatalytic properties

Nanocrystalline TiO(2) catalysts with different anatase/rutile ratios and high surface area (113-169 m(2)/g) have been prepared at low temperature by the microemulsion-mediated hydrothermal method. The samples were characterized by x-ray diffraction (XRD), Fourier transform (FT)-IR spectra, UV-vis diffuse reflectance spectra, and nitrogen adsorption-desorption methods. The contents of anatase and rutile phases in the TiO(2) powders have been successfully controlled by simply changing the proportion of Cl(-) and SO(4)(2-) in the aqueous phase of the microemulsion. A proposed mechanism involving bidentately chelated sulfate is discussed to explain the variation of the crystalline phase in the TiO(2) powder. The photodegradation of methyl orange (MO) in water has been investigated over titanium dioxide consisting of different anatase/rutile ratios. The catalyst containing 74.2% anatase showed the highest photocatalytic activity, which is due to a synergistic effect between anatase and rutile. The synergism was also found for the photodegradation of MO with physically mixed anatase and rutile as catalysts.     

Hydrothermal synthesis of single-crystalline anatase TiO2 nanorods with nanotubes as the precursor

Preparation of anatase TiO2 nanorods from solutions in the absence of surfactants or templates has rarely been reported. The present work has found that hydrothermal treatment of titanate nanotube suspensions under an acidic environment resulted in the formation of single-crystalline anatase nanorods with a specific crystal-elongation direction. The nanotube suspensions were prepared by treatment of TiO2 in NaOH, followed by mixing with HNO3 to different pH values. The crystal size of the anatase nanoparticles obtained from the hydrothermal treatment increased with the pH of the suspensions, and nanorods with an aspect ratio up to 6 and a long axis along the anatase [001] were obtained at a pH slightly less than 7. A mechanism for the tube-to-rod transformation has been proposed on the basis of the crystalline structures of the tubes and rods. The local shrinkage of the tube walls to form anatase crystallites and the subsequent oriented attachment of the crystallites have been suggested to be the key steps involved in the nanorod formation.     

Hierarchical TiO2 nanospheres with dominant {001} facets: facile synthesis, growth mechanism, and photocatalytic activity

Hierarchical TiO(2) nanospheres with controlled surface morphologies and dominant {001} facets were directly synthesized from Ti powder by a facile, one-pot, hydrothermal method. The obtained hierarchical TiO(2) nanospheres have a uniform size of 400-500?nm and remarkable 78?% fraction of {001} facets. The influence of the reaction temperature, amount of HF, and reaction time on the morphology and the exposed facets was systematically studied. A possible growth mechanism speculates that Ti powder first dissolves in HF solution, and then flowerlike TiO(2) nanostructures are formed by assembly of TiO(2) nanocrystals. Because of the high concentration of HF in the early stage, these TiO(2) nanostructures were etched, and hollow structures formed on the surface. After the F(-) ions were effectively absorbed on the crystal surfaces, {001} facets appear and grow steadily. At the same time, the {101} facets also grow and meet the {101} facets from adjacent truncated tetragonal pyramids, causing coalescence of these facets and formation of nanospheres with dominant {001} facets. With further extension of the reaction time, single-crystal {001} facets of hierarchical TiO(2) nanospheres are dissolved and TiO(2) nanospheres with dominant {101} facets are obtained. The photocatalytic activities of the hierarchical TiO(2) nanospheres were evaluated and found to be closely related to the exposed {001} facets. Owing to the special hierarchical architecture and high percentage of exposed {001} facets, the TiO(2) nanospheres exhibit much enhanced photocatalytic efficiency (almost fourfold) compared to P25 TiO(2) as a benchmark material. This study provides new insight into crystal-facet engineering of anatase TiO(2) nanostructures with high percentage of {001} facets as well as opportunities for controllable synthesis of 3D hierarchical nanostructures.     

Fabrication and photovoltaic performance of hierarchically titanate tubular structures self-assembled by nanotubes and nanosheets

Hierarchically macro-/mesoporous titanate tubular structures (HTT) self-assembled by nanotubes and nanosheets were fabricated by hydrothermal treatment of titanate glycolate rods in 0.1 M NaOH aqueous solution. Double-layered dye-sensitized solar cells (DSSCs) composed of a P25 nanoparticle (NP) underlayer and a tubular TiO(2) overlayer demonstrated an enhanced photovoltaic conversion efficiency of 6.2%.