Interaction Between Two Similar Plane Parallel Double Layers for (NH4)2Fe(SO4)2 or (NH4)2Cu(SO4)2 Type Complex Salt Electrolytes at Positive Surface Potential

Interaction energies between two similar plane parallel double layers for (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ type complex salt electrolytes at positive surface potential were expanded in a power series and accurate numeral results were given for 0.1 ≤ y _e  < y ₀ ≤ 20. The general expressions were given for the interaction energies of A _ν +B _ν′ +C_ν? type complex salt electrolytes at y > 0. The interaction energies for simple salts NaCl, CaCl₂, Na₂SO₄, FeCl₃, Na₃PO₄, Mg₃(PO₄)₂, Al₂(SO₄)₃, and complex salts (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ at y ₀ = 1 were compared. There was hardly difference between these simple salts and this complex salt for the interaction energies. The interaction energy for complex salt (NH₄)₂Fe(SO₄)₂ was close to that for simple salt Na₃PO₄.

Supplemental files are available for this article. Go to the publisher's online edition of the Journal of Dispersion Science and Technology to view the free supplemental file.     

Convenient and efficient stereoselective synthesis of (2Z)-2-(chloromethyl)alk-2-enoates using iron(III) or indium(III) chloride

The stereoselective synthesis of (2Z)-2-(chloromethyl)alk-2-enoates has been achieved efficiently and in high yields and in short reaction times from Baylis-Hillman adducts, 3-hydroxy-2-methylene-alkanoates, by treatment with FeCl₃ or InCl₃ at room temperature.     

SPIN-CROSSOVER OF [Fe(Cl-BZIMPY)2](ClO4)2 INDUCED BY DEPROTONATION

Abstract

The ligand 4-Cl-2,6-bis(benzimidazol-2′-yl)-pyridine(Cl-bzimpy;H₂L) acts as a bidentate when coordinated with transition metal ions and the complex [Fe(Cl-bzimpy)₂](ClO₄)₂ was isolated as a solid. The protonation constants (logK). The free ligand and the complex were evaluated in 30:70 (v/v) H₂O:EtOH at room temperature and ionic strength of 0.13M (KCl). Coordination of the ligand to the metal ion leads to an increase of the acidity of the imino-hydrogen of the benzimidazole group. Deprotonation leads to a change in the spin-state (to the low-spin state; HS → LS transition) of the complex associated with a decrease in the spin-crossover equilibrium constant (K_sc). An opposite shift of spin-state is observed when HClO₄ is added to the complex solution, thus showing the reversibility of the process.     

Synthesis,characterization and thermal analysis of [Fe(N2H4)2(CH3COO)2]

[Fe(N₂H₄)₂(CH₃COO)₂] was synthesised and characterized for the first time by chemical analysis, magnetic measurements, electronic and IR spectral studies. Its thermal reactivity was ascertained by thermogravimetric (TG) and derivative thermogravimetric (DTG) techniques and it has been concluded that unlike some other metal carboxylate hydrazinates, it does not show any autocatalytic behaviour. The decomposition was also subjected to kinetic analysis using the equations of Coats-Redfern and Horowitz-Metzger by the method of weighted least-squares.     

DSC study of the phase transitions in [Ni(D2O)6](ClO4)2 and [Ni(H2O)6](ClO4)2

DSC measurements were carried out for [Ni(H₂O)₆](ClO₄)₂ (sampleH) and [Ni(D₂O)₆](ClO₄)₂ (sampleD) in the temperature range 300–380 K. For both compounds two anomalies on the DSC curves were detected. The results for sampleH are compared to those previously obtained using adiabatic calorimetry method. For both compounds studied in this work the high-temperature transition appears at the same temperature while the low-temperature one is shifted towards higher temperatures in sampleD. Disorder connected with H₂O or D₂O groups is suggested in the intermediate phase between the low- and high-temperature transitions.     

Ethynylation of 2-(furan-2-yl)- and 2-(thiophen-2-yl)pyrroles with acylbromoacetylenes in the Al2O3 medium: relative reactivity of heterocycles

2-(Furan-2-yl)- and 2-(thiophen-2-yl)pyrroles are readily ethynylated with acylbromoacetylenes in the solid Al₂O₃ medium (no solvent, room temperature, 1 h) to afford 5-(furan-2-yl)- and 5-(thiophen-2-yl)-2-acylethynylpyrroles in 39–74% yields. In the case of 2-(furan-2-yl)pyrroles, an alternative ethynylation of the furan ring takes place, the ratio of the furan and pyrrole ring ethynylation products being 1:5–7. No ethynylation of the thiophene ring as well as ethynylation of both heterocycles in a one molecule has been detected. Thus the reactivity of the heterocycles towards the ethynylation system (acylbromoacetylenes/Al₂O₃) falls in the order: pyrrole>furan>thiophene.     

Crystal structure of Li2Cu3(SeO3)2(SeO4)2

Summary Single crystal X-ray data of the hydrothermally grown new phase Li₂Cu₃(SeO₃)₂(SeO₄)₂ were measured with a four-circle diffractometer up to sin /=0.81 Å^–1 [I2/a,Z=4,V=1175.5 ų,a=16.293(6),b=5.007(2),c=14.448(6) Å, = 94.21(1)°]. The structure was determined by direct and Fourier methods and refined toR=0.034,R _w =0.027 for 2 086 independent reflections.Cu(1)^[4+1]O₅ forms a tetragonal pyramid, Cu(2)^{[4 + 2]}O₆ is a strongly elongated octahedron. The Li atom is surrounded by four O atoms forming a distorted tetrahedron. Se(IV)O₃ and Se(VI)O₄ groups are in accordance to literature, mean Se-O bond lengths are 1.714 and 1.644 Å.

---

Die Kristallstruktur von Li₂Cu₃(SeO₃)₂(SeO₄)₂

Zusammenfassung Einkristall-Röntgendaten der hydrothermal gezüchteten neuen Phase Li₂Cu₃(SeO₃)₂(SeO₄)₂ wurden mit einem Vierkreisdiffraktometer im Bereich bis zu sin /=0.81 Å^–1 gemessen [I2/a,Z=4,V=1175.5 ų,a=16.293(6),b=5.007(2),c=14.448(6) Å, =94.21(1)°]. Die Kristallstruktur wurde mittels direkter und Fourier-Methoden bestimmt und für 2 086 unabhängige Reflexe zuR=0.034,R _w =0.027 verfeinert.Cu(1)^[4+1]O₅ bildet eine tetragonale Pyramide, Cu(2)^[4+2]O₆ ist ein stark verlängertes Oktaeder. Das Li-Atom ist von vier O-Atomen in Gestalt eines verzerrten Tetraeders umgeben. Die Se(IV)O₃-und Se(VI)O₄-Gruppen entsprechen der Literatur, die mittleren Se-O-Abstände betragen 1.714 und 1.644 Å.

     

Synthesis and thermal investigation of Na2Cd(SO4)2·2H2O

The synthesis and thermal decomposition of Na₂(SO₄)₂·2H₂O in both air and nitrogen are described. The synthesis was performed by two different procedures, but in both cases the same product was obtained, corresponding to the general formula given above. The crystals obtained were investigated by methods of X-ray powder diffraction, and chemical and thermal analysis. The differences in thermal decomposition in air and nitrogen are discussed.     

Die Kristallstruktur von Dikalium-trikobalt(II)-dihydroxid-trisulfat-dihydrat,K2Co3(OH)2(SO4)3·2H2O

Crystals of K₂Co₃(OH)₂(SO₄)₃·2H₂O were synthesized under hydrothermal conditions. The crystal structure [a=17.945 (4) Å,b=7.557 (2) Å,c=9.760 (3) Å, space group Cmc2₁,Z=4] was determined by direct methods and refined with single crystal X-ray data. The H atoms were located byFourier syntheses. Their structural parameters were refined, too. The finalR-values areR=0.025 andR _w =0.028 (w=1/) for 612 reflections withF ₀>3 (F ₀). Both Co(II) atoms are octahedral six coordinated and form zigzag chains running parallel [001]. These chains are connected via sulfate groups to built up sheets parallel (100). The KO₉ polyhedron and one of the four hydrogen bonds link these sheets.

     

Synthesis of 3,4-Dihydropyrimidin-2(1H)-ones Using Ce(SO4)2-SiO2 as a Heterogeneous and Recyclable Catalyst

A simple and efficient synthesis of 3,4-dihydropyrimidinones or thiones is described, using silica-supported ceric sulfate [Ce(SO₄)₂-SiO₂] as a heterogeneous catalyst from an aldehyde, 1,3-dicarbonyl compound, and urea or thiourea at 110 °C under solvent-free conditions. Compared with the classical Biginelli reaction, this new method consistently has better yields, short reaction time, easy separation, and tolerance toward various functional groups.     

Study on inclusion complexes of meso-tetrakis(2-thienyl)porphyrin and Cu-meso-tetrakis(2-thienyl)porphyrin with cyclodextrins by spectroscopy method

In phosphate buffer solution of pH5.4, the interaction of meso-tetrakis(2-thienyl)porphyrin(H₂TTP) and Cu-meso-tetrakis(2-thienyl)porphyrin(Cu-TTP) with α-cyclodextrin(α-CD), β-CD, γ-CD, heptakis(2,3,6-tri-O-methyl)-β-CD(TM-β-CD) has been studied by means of UV-vis, fluorescence and ¹HNMR spectroscopy, respectively. The H₂TTP and Cu-TTP can form 1:2 inclusion complexes with TM-β-CD and 1:1 inclusion complexes with the other three cyclodextrins. In this paper, the inclusion constants (K) of H₂TTP and Cu-TTP for the formation of the inclusion complexes have been estimated from the changes of absorbance and fluorescence intensity in phosphate buffer solution. The inclusive capabilities of different kinds of cyclodextrins are compared. The result shows that the inclusion ability of α-CD with H₂TTP and Cu-TTP is the strongest among the three native CDs. The inclusion ability of modified β-CD with H₂TTP and Cu-TTP is stronger, compared to the native β-CD, which indicates that the capacity matching plays a crucial role in the inclusion procedure except for the hydrophobic effect. In addition ¹HNMR spectra supports the inclusion conformation of the TM-β-CD-Cu-TTP inclusion complex, indicating the interaction mechanism of inclusion processes.     

The thermal decomposition of (NH4)[VO(O2)2(NH3)]

The compound, (NH₄)[VO(O₂)₂(NH₃)], thermally decomposes to ammonium metavanadate, which then decomposes to vanadium pentoxide. Using a heating rate of 5 deg·min^–1, the first decomposition step occurs between 74° and 102°C. The transformation degree dependence of the activation energy (-E) is shown to follow a decreasing convex form, indicating that the first decomposition step is a complex reaction with a change in the limiting stage of the reaction. Infrared spectra indicated that the decomposition proceeds via the gradual reduction of the ratio of the (NH₄)₂O to V₂O₅ units from the original 11 ratio in ammonium metavanadate, which may be written as (NH₄)₂O·V₂O₅, to V₂O₅.The assistance of Professor A. M. Heyns (University of Pretoria) and Professor K. L. Range (University of Regensburg) is gratefully acknowledged as well as the financial assistance of the University of Pretoria and the FRD.     

Novel M(II)–Hg(II) coordination polymers generated from metal-containing building blocks M(2-pyrazinecarboxylate)2 · (H2O)2 (M=Cu, Ni, Co) and HgCl2

A new class of M(II)–Hg(II) (M=Cu(II), Co(II), Ni(II)) mixed-metal coordination polymers, Cu(2-pyrazinecarboxylate)₂HgCl₂ (4), [Co(2-pyrazinecarboxylate)₂(HgCl₂)₂] · 0.61H₂O (5) and [Ni(2-pyrazinecarboxylate)₂(HgCl₂)₂] · 0.77H₂O (6), have been prepared by self assembly of metal-containing building blocks, M(2-pyrazinecarboxylate)₂ · (H₂O)₂(M=Cu(II), Co(II), Ni(II)), with HgCl₂. Compounds 4–6 were characterized fully by IR, elemental analysis and single crystal X-ray diffraction. Compound 4 crystallized in the monoclinic space group C2/c, with a=17.916(5) Å, b=7.223(2) Å, c=13.335(4) Å, β=128.726(3)°, V=1346.2(6) ų, Z=4. It contains alternating Hg(II) and Cu(II) metal centers that are cross-linked by 2-pyrazinecarboxylate spacers and chlorine co-ligands to generate a unique three-dimensional Hg(II)–Cu(II) mixed metal framework. Compound 5 crystallized in the triclinic space group P , with a=6.3879(7) Å, b=6.6626(8) Å, c=13.2286(15) Å, α=96.339(2)°, β=91.590(2)°, γ=113.462(2)°, V=511.71(10) ų, Z=1. Compound 6 also crystallized in the triclinic space group P , with a=6.3543(8) Å, b=6.6194(8) Å, c=13.2801(16) Å, α=96.449(2)°, β=92.263(2)°, γ=113.541(2)°, V=506.67(11) ų, Z=1. Compounds 5 and 6 are isostructural and in the solid state the Hg(II)M(II)Hg(II) units are connected by Hg₂Cl₂ linkages to produce a novel M(II)–Hg(II) (M=Co(II), Ni(II)) zigzag mixed-metal chain, in which a new type of M–M′–M′–M array was observed. The metal containing building blocks, M(2-pyrazinecarboxylate)₂ · (H₂O)₂ (M=Cu(II), Co(II), Ni(II)), exhibit different connectivities to HgCl₂ depending on the metal cation contained within them.     

Synthesis of Novel New 2-(2-(4-((3,4-Dihydro-4-oxo-3-aryl quinazolin-2-yl)methyl)piperazin-1-yl)acetoyloxy)-2-phenyl Acetic Acid Esters

Stereoselective diazotization of (S)-2-amino-2-phenyl acetic acid (L-phenyl glycine) (4) with NaNO₂ in 6% H₂SO₄ in a mixture of acetone and water gave optically pure (S)-2-hydroxy-2-phenyl acetic acid (L-mandelic acid) (5). Esterification, gave (S)-2-hydroxy-2-phenyl acetic acid esters (6). The latter was treated with chloroacetyl chloride in the presence of triethylamine (TEA) in dichloromethane (DCM) to yield (S)-2-chloroacetyloxy phenyl acetic acid ester (2). In another sequence, the reaction of 2-(chloromethyl)-3-arylquinazolin-4(3H)-one (9) treated with N-Boc piperazine, followed by deprotection of the Boc group, to obtain 3-aryl-2-((piperazin-1-yl)methyl) quinazolin-4(3H)-one (3). Reaction of 2 with 3 in the presence of K₂CO₃ and KI gave the title compound, 2-(2-(4-((3,4-dihydro-4-oxo-3-arylquinazolin-2-yl)methyl)piperazin-1-yl) acetoyloxy)-2-phenyl acetic acid esters (1). The structures of all the new compounds obtained in the present work are supported by spectral and analytical data.     

Die Kristallstrukturen der Kupfer(II)-oxo-selenite Cu2O(SeO3) (kubisch und monoklin) und Cu4O(SeO3)3 (monoklin und triklin)

Syntheses within the system CuO-SeO₂-H₂O revealed four copper(II)-oxo-selenites. The crystal structures of these compounds were determined by single crystal X-ray techniques. Chemical formulae, lattice parameters and space groups are: Cu₂O(SeO₃)-I [a=8.925 (1) Å, P2₁3], Cu₂O(SeO₃)-II [a=6.987 (5) Å,b=5.953 (4) Å,c=8.429 (6) Å, =92.17 (3)°, P2₁/n], Cu₄O(SeO₃)₃-I [a=15.990 (8) Å,b=13.518 (8) Å,c=17.745 (12) Å, =90.49 (5)°, P2₁/a], and Cu₄O(SeO₃)₃-II [a=7.992 (6) Å,b=8.141 (6) Å,c=8.391 (6) Å, =77.34 (3)°, =65.56 (3)°, =81.36 (3)°, ].All the Cu atoms are-with one exception-[4], [4+1], and [4+2] coordinated by O atoms. The four nearest O atoms are more or less distorted square planar arranged. Within the CuO₄ squares the Cu-O bond lengths are significantly shorter for the [4] coordinated O atoms as compared with those of the [4+1] and [4+2] coordinated Cu atoms. The exception in the coordination of the Cu atoms is the Cu(1) atom in Cu₂O(SeO₃)-I with the site symmetry 3, which is trigonal dipyramidal [5] coordinated. A common feature of these four crystal structures is, that O atoms outside the SeO₃ groups are tetrahedrally coordinated by four Cu(II) atoms. The Se atoms are as usual [3] coordinated, building up SeO₃ pyramids. In all these four compounds the copper-oxygen polyhedra are combined to a three-dimensional network.

     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.     

A novel Mo(V) diphosphate with an intersecting tunnel structure: Sr(MoO)2(P2O7)2

A novel Mo(V) diphosphate Sr(MoO)₂P₂O₇ has been synthesized. It crystallizes in the space group P2₁/n with a=7.925(1) Å, b=7.739(1) Å, c=9.485(1) Å and β=91.05(1)°. Its original framework consists of MoP₂O₁₁ units built up of one P₂O₇ group sharing two apices with one MoO₆ octahedron. The MoP₂O₁₁ units share corners, forming [MoP₂O₁₀]_∞ chains running along [101]. The assemblage of these chains forms the [Mo₂P₄O₁₆]_∞ intersecting tunnel framework. The Sr²⁺ cations are located at the tunnel intersection, showing a distorted cubic coordination. This structure is compared to those of Ba(MoO)₂P₂O₇ and LiMoOP₂O₇, which are also built up of MoP₂O₁₁ units forming [MoP₂O₁₀]_∞ chains, but with different configurations.     

Environmentally Friendly Preparation of 3,4-Dihydropyrimidin-2(1H)-thiones Catalyzed by Al(H2PO4)3

An efficient, facile, simple, and green synthetic protocol for the Biginelli reaction has been developed for the preparation of 3,4-dihydropyrimidin-2(1H)-thione derivatives under thermal and microwave irradiation, solvent-free conditions, in the presence of aluminum hydrogen phosphate, Al(H₂PO₄)₃, as an environmentally friendly heterogeneous recyclable catalyst, in high to excellent yields and short reaction time. In addition, the catalyst could be easily recovered from the reaction mixture by simple filtration and reused several times without any loss of activity.     

Facile Synthesis and Catalytic Properties of β-Co（OH）2 and Mg（OH）2 Nanoplates

β-Co(OH)2 and Mg(OH)2 nanoplates were synthesized via a facile template-free hydrothermal approach.The different conditions of preparation and catalytic properties of the products were studied and discussed.The products were characterized by X-ray diffraction,transmission electron microscopy,scanning electron microscopy,selected area electron diffraction(SAED),and gas chromatograph.     

Die Kristallstruktur von Cu7(OH)6(TeO3)2(SO4)2

The crystal structure of the new phase Cu₇(OH)₆(TeO₃)₂(SO₄)₂ [a=7.389 (1),b=7.638 (1),c=7.662 (2) Å, =75.17 (1), =75.90 (1), =84.19 (1)°;Z=1] was determined by direct methods andFourier summations from X-ray intensities, and was refined in space group P -C _i ¹ toR=0.039. As usual, the Cu(II) atoms are coordinated to four O atoms forming approximately a square with average Cu-O=1.96 (3) Å; one or two more distant O neighbours complete the coordination. The shape of the TeO₃ group is a rather clear-cut trigonal pyramid. A disorder was found for the SO₄ tetrahedra. The compound was synthesized under hydrothermal conditions [500 (10) K, saturation vapour pressure].

Herrn Prof. Dr.K. Komarek zum 60. Geburtstag gewidmet.