固定化过氧化氢酶的制备及其抗氧化作用

以烟用醋酸纤维的生物化学改性为目标,研究了以壳聚糖为载体时,吸附交联固定化过氧化氢酶的条件,并考察了固定化酶的性质。结果表明,固定化的最佳条件为:加酶量(酶活2×104C IU/m l)6m l,3%壳聚糖20m l,乙二醛浓度6%(w/v),交联剂用量100m l,吸附时间0.5 h,交联时间2.5h,酶活收率可达42.9%。过氧化氢酶固定化后,动学参数Km值为61.7mmol/L;对活性氧具有较好清除作用。     

Gluconic acid production in bioreactor with immobilized glucose oxidase plus catalase on polymer membrane adjacent to anion-exchange membrane

Gluconic acid was obtained in the permeate side of the bioreactor with glucose oxidase (GOD) immobilized onto anion-exchange membrane (AEM) of low-density polyethylene grafted with 4-vinylpiridine. The electric resistance of the anion-exchange membranes was increased after the enzyme immobilization on the membrane. The gluconic acid productions were relatively low with the GOD immobilized by any method on the AEM. To increase the enzyme reaction efficiency, GOD was immobilized on membrane of AN copolymer (PAN) adjacent to an anion-exchange membrane in bioreactor. Uses of anion-exchange membrane led to selective removal of the gluconic acid from the glucose solution and reduce the gluconic acid inhibition. The amount of gluconic acid obtained in the permeate side of the bioreactor with the GOD immobilized on the PAN membrane adjacent to the AEM under electrodialysis was about 30 times higher than that obtained with enzyme directly bound to the AEM. The optimal substrate concentration in the feed side was found to be about 1 g/l. Further experiments were carried out with the co-immobilized GOD plus Catalase (CAT) on the PAN membrane adjacent to the AEM to improve the efficiency of the immobilize system. The yield of this process was at least 95%. The storage stability of the co-immobilized GOD and CAT was studied (lost 20% of initial activity for 90 d). The results obtained clearly showed the higher potential of the dual membrane bioreactor with GOD plus CAT bound to ultrafiltration polymer membrane adjacent to the AEM. Storage stability of GOD activity in GOD plus CAT immobilized on PAN//AEM membranes and on AEM.     

Native and modified glucose oxidase in reversed micelles

The enzymatic activity of the native and modified glucose oxidase (GOx) from Aspergillus niger in the system of reversed micelles of Aerosol OT in octane was investigated. Two forms of the modified enzyme were studied: a hydrophobized form obtained by the attachment of palmitic chains to lysine amino groups by the reaction with palmitic acid ester of N-hydroxysuccinimide and a glycosylated (hydrophilized) form obtained by the attachment of the cellobiose moieties. The native glucose oxidase and its derivatives, while incorporated into micelles in a surfactant concentration range from 0.05 to 0.3 M, display an enzymatic activity, which is comparable with the activity in aqueous solution. The dependence of the enzymatic activity on hydration degree of surfactant (the molar ratio of water to surfactant, W₀) does not indicate the formation of qualitatively new associated forms of the enzyme subunits inside the micelles. The apparent size of Aerosol OT micelles obtained by dynamic light scattering gradually increases from 10±3 nm at low W₀ up to 25±5 nm at high W₀. Incorporation of the native and hydrophobized glucose oxidase into micelles does not affect their mean size. Kinetic analysis shows that the enzyme specificity is about an order of magnitude greater in the system of reversed micelles as compared with aqueous solution.     

A kinetic and spectroscopic study on the copper catalyzed oxidative coupling polymerization of 2,6-dimethylphenol. X-ray structure of the catalyst precursor tetrakis (N-methylimidazole) bis(nitrato) copper(II)

The complex of copper(II) nitrate with N-methylimidazole (Nmiz) ligand has been studied as a catalyst for the oxidative coupling of 2,6-dimethylphenol by means of kinetic and spectroscopic measurements. The order of the reaction in copper is fractional and depends on the N/Cu ratio and the base/Cu ratio, indicating that there are at least two possible rate-determining steps, i.e. the formation of a dinuclear copper species and the phenol oxidation. EPR spectroscopy performed on frozen solutions with varying ligand to copper ratios shows that all Cu(II) is converted into the precursor complex at a ratio of 4 to 1, whereas in kinetic experiments, maximum activity and selectivity are reached only at a ratio of at least 30 to 1. Base is needed as a co-catalyst, and the maximum reaction rate is reached at a base to copper ratio of 1.8 to 1. The solid-state X-ray structure of the catalyst precursor complex has been determined to be [Cu(Nmiz)₄(NO₃)₂], monoclinic, space group P2₁/n, a = 8.452(1) Å, b = 10.376(2)Å, c = 12.821(2)Å, β = 94.88(2) °, Z = 1, R = 0.049 for 3525 reflections. This structure consists of an axially elongated octahedral CuN₄O₂ chromophore, which is in agreement with frozen-solution EPR spectra. Investigations under conditions where water and dioxygen were carefully excluded, have shown that for the phenol oxidation step the presence of dioxygen is not required. However, the reaction does require a trace of water (or hydroxide) to form the reactive intermediate. A modified reaction mechanism for the oxidative coupling is presented with special attention to the first steps of the reaction and the equilibrium species present in solution. The role of dioxygen appears to be only to reoxidize the formed Cu(I) species and to regenerate base.     

Crystal structures of AgAF6 (A = P, As, Sb, Nb, Ta) at ambient temperatures

Structures of AgAF₆ (A=Sb, Ta) have been determined by X-ray single crystal studies at ambient temperatures. AgSbF₆ crystallizes in space group Ia with a=979.85(4) pm, V=9.4076(12)×10⁸ pm³, z=8, and AgTaF₆ crystallizes in space group P4₂/mcm with a=499.49(4) pm, c=960.51(8) pm, V=2.3964(6)×10⁸ pm³, z=2. Only the crystal system and cell parameters were obtained for the isomorphic AgNbF₆; primitive tetragonal, a=497.80(10) pm, b=960.40(10) pm, V=2.3799(12)×10⁸ pm³, z=2. The results of the Raman spectroscopy of AgAF₆ support the obtained structures. The structures are discussed by comparing with that of AgPF₆ and AgAsF₆ which have recently been determined in a series of our study.     

聚脲多孔材料的简单制备及在酶固定和手性拆分中的应用

以甲苯二异氰酸酯(TDI)为单体,在水与丙酮混合溶剂中通过沉淀聚合一步法制备了富含胺基的聚脲多孔材料(PPU),通过扫描电镜和压汞法对其表面形貌和孔结构进行了表征.PPU经戊二醛(GA)活化后用于荧光假单胞菌脂肪酶(PFL)的固定,考察了GA活化过程中GA浓度对酶固定量及固定酶活性的影响.结果表明,PPU是一种粒子尺寸分布在30~50μm范围的形状不规则的多孔粒子,孔径在2 nm~100μm之间呈连续分布.在pH=8.0的缓冲溶液中用0.17 mol/L的GA对PPU进行改性,将改性后的PPU用于PFL的固定,当酶溶液浓度为2.56 mg/m L时,得到酶的最大固定量为95.2 mg/g,固定酶的活性为375 U/mg,相对活性为76%.将此固定酶作为催化剂,用于1-苯乙醇外消旋化合物的手性拆分,并与游离酶催化的结果相比较.结果表明,固定酶的反应活性和立体选择性都明显优于游离酶.通过沉淀聚合制备的聚脲多孔材料在酶固定及手性分子拆分方面具有应用前景.     

Das Reaktionsverhalten von Cp2NbCl2 gegenüber WF6—Struktur von [Cp2NbCl2]4[WF6]2[WCl6]

The oxidation of Cp₂NbCl₂ with pure WF₆ in SO₂ solution yielded the cationic metallocene species [Cp₂NbCl₂]⁺[WF₆]⁻ essentially in quantitative yield. The same reaction carried out in the presence of either equimolar amounts or a two-fold excess of HCN led to the preparation of the new niobocenium salt [Cp₂NbCl₂]₄⁺[WF₆]²⁻ which was studied by single crystal X-ray diffraction. This compound represents the first example of a structurally characterized metallocene-WF₆⁻ complex, and crystallizes in the tetragonal system: space group, P4₁2₁2(No. 92), a = 11.083(8) Å, c = 48.285 (9) Å; Z = 8; R = 0.0759, R_W = 0.0841. ab]Die Oxidation von Cp₂NbCl₂ mit reinem WF₆ führt in SO₂-Lösung zur Synthese von [Cp₂NbCl₂ ]⁺[WF₆]⁻ in nahezu quantitativer Ausbeute. Die analoge Reaktion führt unter Anwesenheit der äquimolaren Menge oder eines zweifachen Überschusses an HCN zur Ausbildung des Niobocenium-Komplexsalzes [Cp₂NbCl₂]₄⁺ [WF₆]₂⁻[WCl₆]²⁻, von dem eine Röntgenstrukturanalyse angefertigt wurde. Diese Verbindung repräsentiert den ersten structurell charakterisierten Vertreter eines Metallocen-WF₆⁻-Komplexes und kristallisiert im tetragonalen System: Raumgruppe P4₁2₁2 (Nr. 92), a = 11.083(8) Å, c = 48.285(9) Å; Z = 8; R = 0.0759, R_W = 0.0841. kw]Niobium; X-ray diffraction; Oxidation; Metallocenes     

CSTR和批式反应器中酶法拆分萘普生的比较

比较了批式反应器和连续流动搅拌反应器中酶动力学拆分萘普生的不同之处。从宏观反应器平衡角度,推导出了在ＣＳＴＲ中不同于在批式反应器中的酶立体选择性,产物对映体过量值和反应转化率的定量关系式,并通过脂肪酶催化的萘一甲酯的不对称水解反应得到了证实。     

An SCF potential energy and dipole surface for rubidium cyanide (RbCN)

Ab initio SCF computations of the potential energy and dipole moment surface of RbCN are reported. The surfaces are represented in an analytic form suitable for the computation of the rovibrational spectrum. The molecule is predicted to be triangular with distances, r(C---N) = 2.186 a₀, r(C---Rb) = 5.811 a₀ and r(N---Rb) = 5.082 a₀.     

Decagonal C60 crystals grown from n-hexane solutions: solid-state and aging studies

Decagonal C₆₀ crystals grown from n-hexane solutions correspond to an orthorhombic 1:1 solvate (a=10.249 , b=31.308 , c=10.164 ). It forms with negative excess volume ( per formula unit) and transforms on heating into fcc C₆₀ (desolvation enthalpy of +50.6 kJ per solvate mole, close to the sublimation enthalpy for pure n-hexane) while n-hexane desorption from fcc C₆₀ is accompanied by an enthalpy of +48.6 kJ per solvent mole. Thus solvate formation is preferred to solvent adsorption. Orthorhombic C₆₀·1 n-hexane undergoes no degradation when stored in air for 9 years at room temperature in the dark.     

Immobilization of L-glutamate oxidase and peroxidase for glutamate determination in flow injection analysis system

Streptomyces SP.N 14, isolated from soil samples, produced extracellular L-glutamate oxidase (GOD) in liquid culture. After a two-step ammonium sulfate purification and dextran G-150 chromatography, the specific activity was reached at 28.2 U/mg. The partial purified enzyme and horseradish peroxidase (HRP) were covalently coupled to alkylamine controlled pore glass (CPG) by means of glutaraldehyde. About 200–300 U/g of immobilized GOD and 300–400 U/g of immobilized HRP were obtained. The immobilized enzymes were packed into a teflon tube and used in flow injection analysis (FIA) for glutamate in broth. A good linear range was observed for this immobilized enzyme system at 0.1–2.0 mM, and the precision was 2.8% (n = 25). More than 80 samples were measured within an hour. One enzyme column with about 4 U of immobilized GOD and 5 U of immobilized HRP, applied for 50 assays/d, has been used for more than 50 d. The concentration of L-glutamate remaining lower than 2.0 mM, the determination of glutamate in this system was not affected by pH and temperature within the range of 6.0–7.0 and 25–35‡C, respectively. The system was applied to determine L-glutamate in broth samples during L-glutamate fermentation, and good correlation was achieved between results obtained with the system and with the Warburg’s method.     

Syntheses and crystal structures of 1,2:5,6:9,10:13,14:17,18:21,22-hexabenzo-3,7,11,15,19,23-hexadehydro[24]annulene (HBC), 1,2:5,6:9,10:13,14-tetrabenzo-3,7,11,15-tetradehydro[16]annulene (QBC) and a tetracobalt complex of QBC. The first example of a transition metal complex of QBC

1,2:5,6:9,10:13,14-Tetrabenzo-3,7,11,15-tetradehydro[16]annulene, or tetrabenzocyclyne (QBC) and 1,2:5,6:9,10:13,14:17,18:21,22-hexabenzo-3,7,11,15,19,23-hexadehydro[24]annulene (HBC) have been structurally characterized by X-ray. crystallography. QBC crystallizes in two different space groups; P2₁/c with a = 10.652(3) Å, b = 10.624(2) Å, c = 19.549(4) Å, β = 93.83(2)°, V = 2207.4(8) ų, and Z = 4 and P4₁2₁2 with a = 9.330(1) Å, c = 25.497(8) Å, V = 2219.6(12) Å, and Z = 4. HBC crystallizes in monoclinic P2₁/n with a = 14.763(3) Å, b = 10.296(2) Å, c = 22.057(4) Å, β = 108.61(3), V = 3177.4(11) ų, T = 133 K, and Z = 4. Reaction of QBC with dicobaltoctacarbonyl has produced a tetracobalt complex which has been characterized by X-ray crystallography. This complex crystallizes in monoclinic P2₁/c with a = 14.699(3) Å, b = 17.188(3) Å, c = 17.254(3) Å, β = 112.63(3)°, V = 4023.5(13) ų, and Z = 4. Only two of the four C---C triple bonds of QBC bind to dicobalthexacarbonyl moieties even when excess dicobaltoctacarbonyl is used.     

Nutritional improvement of soybean oil via lipase-catalyzed interesterification

In order to decrease the content of linoleoyl moiety in soybean oil, soybean oil that contains 22.8% oleoyl, 54.8% linoleoyl, and 7.1% α-linolenoyl moieties as molar acyl moiety composition was interesterified in hexane with oleic acid or α-linolenic acid, using an immobilized sn-l,3-specific lipase (Lipozyme® IM) fromMucor miehei. The reactions were carried out in a batch reactor at 37°C in the following system: molar ratio of fatty acid to soybean oil = 1.0 ～ 6.0, 5.0 mL of hexane/500 μmol soybean oil, and 10.0 or 15.0 batch interesterification units of enzyme/500 μmol soybean oil. Under these reaction conditions, the rates of interesterification of acyl moieties in soybean oil were of the order: stearoyl > palmitoyl > linoleoyl > oleoyl > α-linolenoyl, and the reaction with oleic acid occurred without a significant loss of α-linolenoyl moiety. At the molar ratio of 3.0 and the reaction time of 6 h, triacylglycerols (TGs), which contain 50.8% oleoyl, 38.8% linoleoyl, and 5.4% α-linolenoyl moieties, were produced in the reaction with oleic acid; TGs that contain 13.5% oleoyl, 40.8% linoleoyl, and 40.4% α-linolenoyl moieties were obtained with α-linolenic acid. Approximately 86-88% of the interesterification of linoleoyl moiety, which occurred in 10 h, took place within 1 h.     

Vibrational spectra, conformations, ab initio calculations and vibrational assignments of 3-pentyn-2-ol

The infrared spectra of 3-pentyn-2-ol, CH₃CCCH(OH)CH₃, have been recorded as a vapour and liquid at ambient temperature, as a solid at 78 K in the 4000–50 cm⁻¹ range and isolated in an argon matrix at ca. 5 K. Infrared spectra of the solid phase at 78 K were obtained before and after annealing to temperatures of 120 and 130 K. The IR spectra of the solid were quite similar to that of the liquid.

Raman spectra of the liquid were recorded at room temperature and at various temperatures between 295 and 153 K. Spectra of an amorphous and annealed solid were recorded at 78 K. In the variable temperature Raman spectra, some bands changed in relative intensity and were interpreted in terms of conformational equilibria between the three possible conformers. Complete assignments were made for all the bands of the most stable conformer in which OH is oriented anti to C₁(a_Me). From various bands assigned to a second conformer in which OH is oriented anti to H_gem(a_H), the conformational enthalpy differences was found to be between 0.4 and 0.8 kJ mol⁻¹. The highest energy conformer with OH anti to C₃(a_C) was not detected.

Quantum-chemical calculations have been carried out at the MP2 and B3LYP levels with a variety of basis sets. Except for small basis set calculations for which the a_H conformer had slightly lower energy, all the calculations revealed that a_Me was the low energy conformer. The B3LYP/cc-pVTZ calculations suggested the a_Me conformer as more stable by 0.8 and 8.3 kJ mol⁻¹ relative to a_H an a_C, respectively. Vibrational wavenumbers and infrared and Raman band intensities for two of the three conformers are reported from B3LYP/cc-pVTZ calculations.     

Equilibrium diagram of KPO3–Y(PO3)3 system, chemical preparation and characterization of KY(PO3)4

Microdifferential thermal analysis (μ-DTA), X-ray diffraction (XRD) and infrared (IR) spectroscopy were used for the first time to investigate the liquidus and solidus relations in the KPO₃–Y(PO₃)₃ system. The only compound observed within the system was KY(PO₃)₄ melting incongruently at 1033 K. An eutectic appears at 13.5 mol% Y(PO₃)₃ at 935 K, the peritectic occurs at 1033 K and the phase transition for potassium polyphosphate KPO₃ was observed at 725 K. Three monoclinic allotropic phases of the single crystals were obtained. KY(PO₃)₄ polyphosphate has the P2₁ space group with lattice parameters: a=7.183(4) Å, b=8.351(6) Å, c=7.983(3) Å, β=91.75(3)° and Z=2 is isostructural with KNd(PO₃)₄. The second allotropic form of KY(PO₃)₄ belongs to the P2₁/n space group with lattice parameters: a=10.835(3) Å, b=9.003(2) Å, c=10.314(1) Å, β=106.09(7)° and Z=4 and is isostructural with TlNd(PO₃)₄. The IR absorption spectra of the two forms show a chain polyphosphates structure. The last modification of KYP₄O₁₂ crystallizes in the C2/c space group with lattice parameters: a=7.825(3) Å, b=12.537(4) Å, c=10.584(2) Å, β=110.22(7)° and Z=4 is isostructural with RbNdP₄O₁₂ and contains cyclic anions. The methods of chemical preparations, the determination of crystallographic data and IR spectra for these compounds are reported.     

A simple method for functionalization of cellulose membrane for covalent immobilization of biomolecules

Activated cellulose membrane was prepared by a simple photochemical reaction at 365 nm in 12 min using a photolinker, 1-fluoro-2-nitro-4-azidobenzene. XPS analysis of the activated cellulose membrane confirmed the presence of nitrogen and fluorine in the ratio of 2:1. Immobilization of a protein molecule onto the activated membrane occurred in 2 h at 37 °C. In contrast, no appreciable immobilization occurred onto the untreated surface. Disappearance of the fluorine peak in the XPS spectra of membrane having immobilized HRP confirmed covalent binding of the protein onto the activated membrane. Invertase was also immobilised onto the activated membrane and used in a flow through reactor system for conversion of sucrose to glucose and fructose. Immobilized invertase was found to be stable for at least 72 h of continuous run. The kinetic parameters of the enzyme reaction, Michaelis constant (K_m) and V_max value of immobilized invertase was studied. The activated membrane when used in an ELISA procedure to detect immunoglobulins in human sera, showed around 2.6-fold higher sensitivity than the untreated membrane. The activated cellulose membrane has the potential for versatile applications such as in diagnostics, in flow reactor system for an enzyme-catalysed reaction and in membrane based affinity chromatography.     

Flow-injection determination of 3-hdroxybutyrate in serum with an immobilized 3-hydroxybutyrate dehydrogenase reactor and chemiluminescence detection

A flow-injection system for the determination of 3-hydroxybutyrate in serum is described. 3-Hydroxybutyrate dehydrogenase is immobilized on poly(vinyl alcohol) beads and incorporated in a flow-injection system. 1-Methoxy-5-methylphenazinium methylsulphate reacts with enzymatically generated NADH to give H₂O₂, which is detected chemiluminometrically with the reaction of luminol and hexacynoferrate(III). Serum is diluted and filtered through an ultrafiltration membrane. The system responds linearly to injected samples (80 μl) in the concentration range 0.5–300 μM; the detection limit is 0.1 μM. The within-day relative standard deviation (n = 90) for 58 μM 3-hydroxybutyrate in serum is 0.8%. The maximum throughout is 20 samples per hour. The immobilized enzyme is stable for at least 1 month.     

脂肪酶的固定化及其在有机酶促反应中稳定性研究

利用吸附法,将圆柱状假丝酵母脂肪酶固定于４种疏水性不同的载体上,固定化酶的活性及稳定性随载休疏水性的增大而增大。用ＹＧＷ－Ｃ６Ｈ５作为载体,在有机溶剂－水双液相体系中催化萘普生甲酯的不对称水解,反应１２０ｈ转化率为２４．７２％,产品的对映体过量值为９４．８２％。     

Synthesis and application of diphenylbis (3,5-dimethylpyrazol-1-yl)methane to form η-arene complexes of molybdenum

The neutral nitrogen-bidentate ligand, diphenylbis(3,5-dimethylpyrazol-1-yl)methane, Ph₂CPz′₂, can readily be obtained by the reaction of Ph₂CCl₂ with excess HPz′ in a mixed-solvent system of toluene and triethylamine. It reacts with [Mo(CO)₆] in 1,2-dimethoxyethane to give the η²-arene complex, [Mo(Ph₂CPz′₂)(CO)₃] (1). This η²-ligation appears to stabilize the coordination of Ph₂CPz′ ₂ in forming [Mo(Ph₂CPz′₂)(CO)₂(N₂C₆H₄NO₂-p)][BPh₄] (2) and [Mo(Ph₂CPz′₂)(CO)₂(N₂Ph)] [BF₄] (3) from the reaction of 1 with the appropriate diazonium salt but the stabilization seems not strong enough when [Mo{P(OMe)₃} ₃(CO)₃] is formed from the reaction of 1 with P(OMe)₃. The solid-state structures of 1 and 3 have been determined by X-ray crystallography: 1-CH₂Cl₂, monoclinic, P2₁/n, a = 11.814(3), b = 11.7929(12), c = 19.46 0(6) Å, β = 95.605(24)°, V = 2698.2(11) ų, Z = 4, D_calc = 1.530 g/cm³ , R = 0.044, R_w = 0.036 based on 3218 reflections with I > 2σ(I); 2 (3)-1/2 hexane-1/2 CH₃OH-1/2 H₂O-1 CH₂Cl₂, monoclinic, C2/c, a = 41.766(10), b = 20.518(4), c = 16.784(3) Å, β = 101.871(18)°, V = 14076(5) ų, Z = 8, D_calc = 1.457 g/cm³, R = 0.064, R_w = 0.059 based on 5865 reflections with I > 2σ(I). Two independent cations were found in the asymmetric unit of the crystals of 3. The average distance between the Mo and the two η²-ligated carbon atoms is 2.574 Å in 1 and 2.581 and 2.608 Å in 3. The unfavourable disposition of the η²-phenyl group with respect to the metal centre in 3 and the rigidity of the η²-arene ligation excludes the possibility of any appreciable agostic C---H → Mo interaction.     

微乳液中脂肪酶和含明胶的微乳液凝胶中固定化脂肪酶的催化特性

在双2-乙基己基琥珀酸酯磺酸钠(AOT)油包水微乳液中Calytical脂肪酶催化月桂酸和戊醇的酯化反应动力学研究表明,反应符合乒乓(BiBi)机制.表观速率常数k_m酸=0.13518mol/L,k_m醇=0.22423mol/L,最大反应速度v_max=1.3873×10^-5mol/(L·min·mg).将该脂肪酶固定于含明胶的微乳液凝胶(MBGs)中,制得固定化脂肪酶,含酶MBGs在非极性溶剂中可作为固相催化剂,并研究了其在辛烷中催化酯化的性能.所制得的含酶MBGs物理稳定性好,重复利用10次以上,其转化率仍达初始转化率的90%.