Influence of lateral mass flux on mixed convection heat and mass transfer over inclined surfaces in porous media

 The effect of lateral mass flux on mixed convection heat and mass transfer in a saturated porous medium adjacent to an inclined permeable surface is analyzed. A similarity solution is obtained when surface temperature and concentration, free stream velocity and injection/suction velocity of fluid are prescribed as power functions of distance from the leading edge. The cases when the flow and buoyancy forces are in the same and opposite directions are discussed both for aiding and opposing buoyancy effects. The governing parameters are the mixed convection parameter Gr, the Lewis number Le, the buoyancy ratio N, the lateral mass flux parameter f _w, representing the effects of injection or withdrawal of fluid at the wall, and λ which specifies three cases of the inclined plate. The interactive effect of these parameters on heat and mass transfer rates are presented. It is observed that the diffusion ratio (Le) has a more pronounced effect on concentration field than on flow and temperature fields. It is found that the rates of heat and mass transfer increase with suction and decrease with injection of the fluid. Received on 31 August 2000 / Published online: 29 November 2001     

Mixed convection cooling of a heated, continuously stretching surface

 An numerical study of the flow and heat transfer characteristics associated with a heated, continuously stretching surface being cooled by a mixed convection flow has been carried out. The relevant heat transfer mechanisms are of interest in a wide variety of practical applications, such as hot rolling, continuous casting, extrusion, and drawing. The surface velocity of the continuously stretching sheet was assumed to vary according to a power-law form, that is, u _w (x)=Cx ^p . Two conditions of surface heating were considered, a variable wall temperature (VWT) in the form T _w (x)−T _∞=Ax ⁿ and a variable surface heat flux (VHF) in the form q _w (x)=Bx ^m . The governing differential equations are transformed by introducing proper nonsimilarity variables and solved numerically using a procedure based on finite difference approximations. Results for the local Nusselt number and the local friction coefficient are obtained for a wide range of governing parameters, such as the surface velocity parameter p, the wall temperature exponent n, the surface heat flux exponent m, the buoyancy force parameters (ξ for the VWT case and χ for the VHF case), and Prandtl number of the fluid. It is found that the local Nusselt number is increased with increasing the velocity exponent parameter p for the VWT case, while the opposite trend is observed for the VHF case. The local friction coefficient is increased for a decelerated stretching surface, while it is decreased for an accelerated stretching surface. Also, appreciable effects of the buoyancy force on the local Nusselt number and the local friction coefficient are observed for both VWT and VHF cases, as expected. Received on 11 January 1999     

Heat transfer characteristics of boundary-layer flows induced by continuous surfaces stretched with prescribed skin friction

A continuous surface stretched with velocity u _w=u _w (x) and having the temperature distribution T _w=T _w (x) interacts with the viscous fluid in which it is immersed both mechanically and thermally. The thermal interaction is characterized by the surface heat flux q _w=q _w (x) and the mechanical one by the skin friction τ _w=τ _w (x). In the whole previous theoretical research concerned with such processes, either (u _w and T _w) or (u _w and q _w) have been prescribed as known boundary conditions. The goal of the present paper is to initiate the investigation of the boundary layer flows induced by stretching processes for which either (τ _w and T _w ) or (τ _w and q _w) are the prescribed quantities. The case of an isothermal surface stretched with constant skin friction, (τ _w=const., T _w=const. ≠ T _∞) is worked out in detail. The corresponding flow and heat transfer characteristics are compared to those obtained for the (well known) case of a uniformly moving isothermal surface (u _w=const., T _w=const. ≠ T _∞).     

Laminar mixed convection adjacent to vertical, continuously stretching sheets

The analysis of laminar mixed convection in boundary layers adjacent to a vertical, continuously stretching sheet has been presented. The velocity and temperature of the sheet were assumed to vary in a power-law form, that is, u _w (x)=Bx ^m and T _w (x)−T _∞=Ax ⁿ . In the presence of buoyancy force effects, similarity solutions were reported for the following two cases: (a) n=0 and m=0.5, which corresponds to an isothermal sheet moving with a velocity of the form u _w =Bx ^0.5 and (b) n=1 and m=1, which corresponds to a continuous, linearly stretching sheet with a linear surface temperature distribution, i.e. T _w −T _∞=Ax. Formulation of the present problem shows that the heat transfer characteristics depends on four governing parameters, namely, the velocity exponent parameter m, the temperature exponent parameter n, the buoyancy force parameter G ^*, and Prandtl number of the fluid. Numerical solutions were generated from a finite difference method. Results for the local Nusselt number, the local friction coefficient, and temperature profiles are presented for different governing parameters. Effects of buoyancy force and Prandtl number on the flow and heat transfer characteristics are thoroughly examined. Received on 17 July 1997     

Radiation-conduction interaction on mixed convection from a horizontal circular cylinder

A mixed convection flow of an optically dense viscous incompressible fluid along a horizontal circular cylinder has been studied with the effect of radiation when the surface temperature is uniform. Using appropriate transformations, the boundary layer equations governing the flow are reduced to local nonsimilarity form. Solutions of the governing equations are obtained employing the implicit finite difference method. Effects of varying the pertinent parameters, such as, the Planck number, R _w the surface temperature parameter, θ_w and the buoyancy parameter, α on the local skin-friction and local heat transfer coefficients are shown graphically as well as in tabular form against the curvature parameter ξ, while taking Prandtl number Pr = 1.0. It is found that an increase of R _d,θ_w or α leads to increases in the values of the local skin-friction and the local rate of heat transfer coefficients. At the stagnation point asymptotic solutions for large value of α are also obtained and the effect of the other pertinent parameters on the formation of the flow separation are studied. Received on 28 July 1998     

Mixed Convection Boundary Layer Flow from a Horizontal Circular Cylinder Embedded in a Porous Medium Filled with a Nanofluid

Steady mixed convection boundary layer flow from an isothermal horizontal circular cylinder embedded in a porous medium filled with a nanofluid has been studied for both cases of a heated and cooled cylinder. The resulting system of nonlinear partial differential equations is solved numerically using an implicit finite-difference scheme. The solutions for the flow and heat transfer characteristics are evaluated numerically for various values of the governing parameters, namely the nanoparticle volume fraction φ and the mixed convection parameter λ. Three different types of nanoparticles are considered, namely Cu, Al₂O₃ and TiO₂. It is found that for each particular nanoparticle, as the nanoparticle volume fraction φ increases, the magnitude of the skin friction coefficient decreases, and this leads to an increase in the value of the mixed convection parameter λ which first produces no separation. On the other hand, it is also found that of all the three types of nanoparticles considered, for any fixed values of φ and λ, the nanoparticle Cu gives the largest values of the skin friction coefficient followed by TiO₂ and Al₂O₃. Finally, it is worth mentioning that heating the cylinder (λ > 0) delays separation of the boundary layer and if the cylinder is hot enough (large values of λ > 0), then it is suppressed completely. On the other hand, cooling the cylinder (λ < 0) brings the boundary layer separation point nearer to the lower stagnation point and for a sufficiently cold cylinder (large values of λ < 0) there will not be a boundary layer on the cylinder.     

Non-Darcian Forced Convection Flow of Viscous Dissipating Fluid over a Flat Plate Embedded in a Porous Medium

In this study, laminar boundary layer flow over a flat plate embedded in a fluid-saturated porous medium in the presence of viscous dissipation, inertia effect and suction/injection is analyzed using the Keller box finite difference method. The flat plate is assumed to be held at constant temperature. The non-Darcian effects of convection, boundary and inertia are considered. Results for the local heat transfer parameter and the local skin friction parameter as well as the velocity and temperature profiles are presented for various values of the governing parameters. The non-Darcian effects are shown to decrease the velocity and to increase the temperature. It is also shown that the local heat transfer parameter and the local skin friction parameter increase due to suction of fluid while injection reverses this trend. It is disclosed that the effect of the viscous dissipation for negative values of Ec (T _w < T _∞) is to enhance the heat transfer coefficient while the opposite is true for positive values of Ec (T _w > T _∞). The results are compared with those available in the existing literature and an excellent agreement is obtained.     

Thermal convection in a porous layer: Effects of anisotropy and surface boundary conditions

The theory describing the onset of convection in a homogeneous porous layer bounded above and below by isothermal surfaces is extended to consider an upper boundary which is partly permeable. The general boundary condition p + λ ∂p/∂n = constant is applied at the top surface and the flow is investigated for various λ in the range 0 ⩽ λ < ∞. Estimates of the magnitude and horizontal distribution of the vertical mass and heat fluxes at the surface, the horizontally-averaged heat flux (Nusselt number) and the fraction of the fluid which recirculates within the layer are found for slightly supercritical conditions. Comparisons are made with the two limiting cases λ → ∞, where the surface is completely impermeable, and λ = 0, where the surface is at constant pressure. Also studied are the effects of anisotropy in permeability, ξ = K _H /K _V , and anisotropy is thermal conductivity, η = k _H /k _V , both parameters being ratios of horizontal to vertical quantities. Quantitative results are given for a wide variety of the parameters λ, ξ and η. In the limit ξ/η → 0 there is no recirculation, all fluid being converted out of the top surface, while in the limit ξ/η → ∞ there is full recirculation.     

Flow and heat transfer from a continuous surface in a parallel free stream of viscoelastic second-order fluid

Boundary layer solutions are presented to investigate the steady flow and heat transfer characteristics from a continuous flat surface moving in a parallel free stream of viscoelastic fluid. Numerical results are presented for the distribution of velocity and temperature profiles within the boundary layer. The effects of the viscoelastic parameter of the fluid on the shear stress at the wall and rate of heat transfer are studied. For the same Reynolds (based on the larger of the free stream and wall velocities) and Prandtl numbers and the same velocity difference |U _w >|, larger skin-friction and heat transfer coefficient result for U _w > than for U _w <.     

Exact analytic solutions for free convection boundary layers on a heated vertical plate with lateral mass flux embedded in a saturated porous medium

 The problem of the self-similar boundary flow of a “Darcy-Boussinesq fluid” on a vertical plate with temperature distribution T _w(x) = T _∞+A·x ^λ and lateral mass flux v _w(x) = a·x ^(λ−1)/2, embedded in a saturated porous medium is revisited. For the parameter values λ = 1,−1/3 and −1/2 exact analytic solutions are written down and the characteristics of the corresponding boundary layers are discussed as functions of the suction/ injection parameter in detail. The results are compared with the numerical findings of previous authors. Received on 8 March 1999     

Mass transfer effects on the non-Newtonian fluids past a vertical plate embedded in a porous medium with non-uniform surface heat flux

 The present study is devoted to investigate the influences of mass transfer on buoyancy induced flow over vertical flat plate embedded in a non-Newtonian fluid saturated porous medium. The Ostwald–de Waele power-law model is used to characterize the non-Newtonian fluid behavior. Similarity solution for the transformed governing equations is obtained with prescribed variable surface heat flux. Numerical results for the details of the velocity, temperature and concentration profiles are shown on graphs. Excess surface temperature as well as concentration gradient at the wall associated with heat flux distributions, which are entered in tables, have been presented for different values of the power-law index n, buoyancy ration B and the exponent λ as well as Lewis number Le. Received on 26 April 2000     

Hydromagnetic flow and heat transfer adjacent to a stretching vertical sheet

An analysis is made for the steady two-dimensional magneto-hydrodynamic flow of an incompressible viscous and electrically conducting fluid over a stretching vertical sheet in its own plane. The stretching velocity, the surface temperature and the transverse magnetic field are assumed to vary in a power-law with the distance from the origin. The transformed boundary layer equations are solved numerically for some values of the involved parameters, namely the magnetic parameter M, the velocity exponent parameter m, the temperature exponent parameter n and the buoyancy parameter λ, while the Prandtl number Pr is fixed, namely Pr = 1, using a finite difference scheme known as the Keller-box method. Similarity solutions are obtained in the presence of the buoyancy force if n = 2m−1. The features of the flow and heat transfer characteristics for different values of the governing parameters are analyzed and discussed. It is found that both the skin friction coefficient and the local Nusselt number decrease as the magnetic parameter M increases for fixed λ and m. For m = 0.2 (i.e. n = −0.6), although the sheet and the fluid are at different temperatures, there is no local heat transfer at the surface of the sheet except at the singular point of the origin (fixed point).     

Steady mixed convection boundary layer flow over a vertical flat plate in a porous medium filled with water at 4°C: case of variable wall temperature

The problem of steady mixed convection boundary layer flow over a vertical impermeable flat plate in a porous medium saturated with water at 4°C (maximum density) when the temperature of the plate varies as x ^m and the velocity outside boundary layer varies as x ^{2 m} , where x measures the distance from the leading edge of the plate and m is a constant is studied. Both cases of the assisting and the opposing flows are considered. The plate is aligned parallel to a free stream velocity U _∞ oriented in the upward or downward direction, while the ambient temperature is T _∞ = T _m (temperature at maximum density). The mathematical models for this problem are formulated, analyzed and simplified, and further transformed into non-dimensional form using non-dimensional variables. Next, the system of governing partial differential equations is transformed into a system of ordinary differential equations using the similarity variables. The resulting system of ordinary differential equations is solved numerically using a finite-difference method known as the Keller-box scheme. Numerical results for the non-dimensional skin friction or shear stress, wall heat transfer, as well as the temperature profiles are obtained and discussed for different values of the mixed convection parameter λ and the power index m. All the numerical solutions are presented in the form of tables and figures. The results show that solutions are possible for large values of λ and m for the case of assisting flow. Dual solutions occurred for the case of opposing flow with limited admissible values of λ and m. In addition, separation of boundary layers occurred for opposing flow, and separation is delayed for the case of water at 4°C (maximum density) compared to water at normal temperature.     

Laminar mixed convection from a continuously moving vertical surface with suction or injection

The boundary layer flow over a uniformly moving vertical surface with suction or injection is studied when the buoyancy forces assist or oppose the flow. Similarity solutions are obtained for the boundary layer equations subject to power law temperature and velocity boundary conditions. The effect is of various governing parameters, such as Prandtl number Pr, temperature exponent n, injection parameter d, and the mixed convection parameter λ=Gr/Re², which determine the velocity and temperature distributions and the heat transfer coefficient, are studied. The heat transfer coefficient increases as λ assisting the flow for all d at Pr=0.72 however, for n=−1 it decreases sharply with λ. On the other hand, increasing λ has no effect on heat transfer coefficient for Pr=10 at n=0, and 1 for almost all values of d studied. However, for n=−1 it has similar effect as for Pr=0.72. It is also found that Nusselt number increases as n increases for fixed λ and d. Received on 26 March 1997     

Simultaneous heat and mass transfer under unsteady mixed convection along a vertical slender cylinder embedded in a porous medium

Unsteady laminar mixed convection flow (combined free and forced convection flow) along a vertical slender cylinder embedded in a porous medium under the combined buoyancy effect of thermal and species diffusion has been studied. The effect of the permeability of the medium as well as the magnetic field has been included in the analysis. The partial differential equations with three independent variables governing the flow have been solved numerically using a implicit finite difference scheme in combination with the quasilinearization technique. Computations have been carried out for accelerating, decelerating and oscillatory free stream velocity distributions. The effects of the permeability of the medium, buoyancy forces, transverse curvature and magnetic field on skin friction, heat transfer and mass transfer have been studied. It is found that the effect of free stream velocity distribution is more pronounced on the skin friction than on the heat and mass transfer. The permeability and magnetic parameters increase the skin friction, but reduce the heat and mass transfer. The skin friction, heat transfer and mass transfer are enhanced due to the buoyancy forces and curvature parameter. The heat transfer is strongly dependent on the viscous dissipation parameter and the Prandtl number, and the mass transfer on the Schmidt number.     

Surface flow pattern and local mass transfer on the free-end surface of a finite circular cylinder

 Relation between the surface flow pattern and the local mass transfer characteristic on the free end surface of a finite circular cylinder mounted on a flat plate was investigated using the oil surface flow visualization and the naphthalene sublimation technique. The aspect ratio [the ratio of the cylinder length to the cylinder diameter (H/D)] was 1.25 and the Reynolds number based on the diameter was 1.48 × 10⁵. Several kinds of critical points on the free-end surface were identified by the visualization and the mass transfer measurement around those critical points through the naphthalene sublimation technique was then performed to investigate the relation between the flow and mass transfer. The free-end surface flow was topologically characterized by the presence of a saddle point and two focal points in the fore-half portion of the surface and two nodes and a saddle point in the rear-half portion. It was found that the rate of mass transfer was largest in the vicinity of the nodes in the rear-half of the free-end surface. Received on 26 April 2000     

Combined forced and natural convection in laminar film flow

A mathematical model for the flow and heat transfer in a gravity-driven liquid film is presented, in which the strict Boussinesq approximation is adopted to account for buoyancy. A similarity transformation reduces the governing equations to a coupled set of ordinary differential equations. The resulting two-parameter problem is solved numerically for Prandtl numbers ranging from 1 to 1000. Favourable buoyancy arises when the temperatureT _w of the isothermal surface is lower than the temperatureT ₀ of the incoming fluid, and the principal effects of the aiding buoyancy are to increase the wall shear and heat transfer rate. For unfavourable buoyancy (T _w>T ₀), the buoyancy force and gravity act in opposite directions and the flow in the film boundary layer decelerates, whereas the friction and heat transfer are reduced. The observed effects of buoyancy diminish appreciably for higher Prandtl numbers.     

Steady mixed convection boundary-layer flow over a vertical flat surface in a porous medium filled with water at 4°C: variable surface heat flux

The steady mixed convection boundary-layer flow over a vertical impermeable surface in a porous medium saturated with water at 4°C (maximum density) when the surface heat flux varies as x ^m and the velocity outside the boundary layer varies as x ^(1+2m)/2, where x measures the distance from the leading edge, is discussed. Assisting and opposing flows are considered with numerical solutions of the governing equations being obtained for general values of the flow parameters. For opposing flows, there are dual solutions when the mixed convection parameter λ is greater than some critical value λ _c (dependent on the power-law index m). For assisting flows, solutions are possible for all values of λ. A lower bound on m is found, m > −1 being required for solutions. The nature of the critical point λ _c is considered as well as various limiting forms; the forced convection limit (λ = 0), the free convection limit (λ → ∞) and the limits as m → ∞ and as m → −1.     

Self-similar solution of the unsteady mixed convection flow in the stagnation point region of a rotating sphere

An analysis is performed to present a new self-similar solution of unsteady mixed convection boundary layer flow in the forward stagnation point region of a rotating sphere where the free stream velocity and the angular velocity of the rotating sphere vary continuously with time. It is shown that a self-similar solution is possible when the free stream velocity varies inversely with time. Both constant wall temperature and constant heat flux conditions have been considered in the present study. The system of ordinary differential equations governing the flow have been solved numerically using an implicit finite difference scheme in combination with a quasilinearization technique. It is observed that the surface shear stresses and the surface heat transfer parameters increase with the acceleration and rotation parameters. For a certain value of the acceleration parameter, the surface shear stress in x-direction vanishes and due to further reduction in the value of the acceleration parameter, reverse flow occurs in the x–component of the velocity profiles. The effect of buoyancy parameter is to increase the surface heat transfer rate for buoyancy assisting flow and to decrease it for buoyancy opposing flow. For a fixed buoyancy force, heating by constant heat flux yields a higher value of surface heat transfer rate than heating by constant wall temperature.     

Unsteady free convection on a vertical cylinder with variable heat and mass flux

The unsteady natural convection boundary layer flow over a semi-infinite vertical cylinder is considered with combined buoyancy force effects, for the situation in which the surface temperature T ^′ _w(x) and C ^′ _w(x) are subjected to the power-law surface heat and mass flux as K(T ^′/r) = −ax ⁿ and D(C ^′/r) = −bx ^m . The governing equations are solved by an implicit finite difference scheme of Crank-Nicolson method. Numerical results are obtained for different values of Prandtl number, Schmidt number ‘n’ and ‘m’. The velocity, temperature and concentration profiles, local and average skin-friction, Nusselt and Sherwood numbers are shown graphically. The local Nusselt and Sherwood number of the present study are compared with the available result and a good agreement is found to exist. Received on 7 July 1998