用半导体环形激光器产生混沌信号

提出了一种由一个分布式反馈激光器为主激光器和一个半导体环形激光器为从激光器组成的主从式激光混沌系统方案,主激光器产生的光单向注入到从激光器中,通过调整注入系数、主从激光器的失谐频率和从激光器的偏置电流,使从激光器工作在混沌状态,输出混沌信号。从基于光注入条件下的环形激光器的速率方程组入手,数值模拟了主从激光器的失谐频率、注入系数和从激光器的偏置电流3个工作参量对从激光器输出动态的影响。研究表明:外光注入条件下,半导体环形激光器可以产生混沌信号。通过分析得出:当失谐频率为3.9 GHz、注入系数为0.07、偏置电流为81 mA时,环形激光器可以产生功率谱平坦、带宽较宽的高质量混沌信号。     

高能激光技术进展与面临的挑战

文章分析和比较了几种高能激光器技术发展现状和面临的挑战,以及各自可能适用的范围.特别对二极管抽运固体激光器和光纤激光器的几种束相干合成方法和光束质量评价方法进行了分析和讨论.二极管抽运固体激光器和光纤激光器近十年来异军突起,被人们看作是继化学激光器后的第二代高能激光器.光纤激光器进展要比二极管抽运固体激光器滞后5到10年.对几十万瓦以上的激光器来说,在相当长的时间内仍然要靠化学激光器.     

光纤激光宽温度范围运行研究进展

简要回顾了高功率掺镱光纤激光器的发展历程,指出宽温运行光纤激光器的需求与应用场景。综述已有关于光纤激光器在变温条件下的研究成果,在高功率光纤激光器的发展中,工作温度对光纤激光器造成的影响将进一步显现。介绍了利用现有光纤器件以及传统光纤激光器设计的宽温运行光纤激光器案例。通过系统设计和结构优化,本课题组已成功实现千瓦级的宽温运行光纤激光器,整机运行温度从常温拓展到-30℃。进一步的功率提升和温度范围拓展还需要对光纤激光器工作机理、光纤器件温度特性等方面进行深入研究。此外,展望了宽温运行光纤激光器的发展趋势,研究结果为高功率宽温运行光纤激光器的发展提供了参考。     

稳定耦合效率的沟槽结构半导体激光器

为了稳定半导体激光器激射光束在光纤传输过程的耦合效率,提出一种沟槽结构的半导体激光器,并对该结构激光器的光束、耦合效率及P-I特性进行研究。在普通条形半导体激光器的脊形区刻蚀了周期性的沟槽结构,来改善半导体激光器有源区的增益分布。通过对比普通结构与沟槽结构半导体激光器的光束分析,测试其耦合效率以及P-I特性。结果表明:沟槽结构的半导体激光器能够使光腔内模式更加稳定,输出光束更加集中,并避免了"Kink"效应的发生;与此同时,耦合效率提高至97.7%,并且较普通结构激光器更为稳定。沟槽结构半导体激光器有效地解决了光斑跳动问题,稳定了激光器的耦和效率。     

线性调频半导体激光器自混频干涉理论模型

使用半导体激光器在弱反馈条件下的动力学理论,建立了线性调频半导体激光器的自混频干涉理论模型.基于该模型,分析了激光器振荡频率偏移与输出功率变化特性.通过测量激光器输出功率谱,可以得到激光器前端面与被测目标之间的距离.     

大功率全固态激光数控加工机床

工业焊接切割使用的大功率激光器主要经历了CO．激光器、灯泵浦Nd：YAG固体激光器阶段,现在正向全固态激光器的应用方向发展。全固态激光器集半导体激光器和固体激光器的优势于一体,具有体积小、重量轻、效率高、性能稳定、可靠性好、寿命长、光束质量高等优点,近年来已成为激光学科的重点发展方向之一,大功率全固态激光器在工业加工、军事和科研等领域中有着十分重要的应用前景。     

微热通道电极结构宽条形半导体激光器输出特性

为了抑制宽条形半导体激光器的热透镜效应,提高慢轴光束质量,本文提出并制作了一种微热通道电极结构激光器。该芯片p面注入区电极处被设计为较厚的高热导率的电极结构,封装后激光器两侧与热沉之间形成空气间隙,抑制激光器有源区横向热流,使激光器内温度分布均匀,有效地降低慢轴发散角。对该激光器的封装模型进行了稳态热分析,优化了微热通道电极结构的厚度和宽度,并制作了波长为940 nm的微热通道电极结构激光器。测试结果表明,在注入电流为2 A时,微热通道电极结构激光器的发散角相对于普通电极结构激光器降低了24%,有效地降低了激光器慢轴光束发散角。     

基于光电反馈的激光混沌并联同步系统研究

提出了基于光电反馈的激光混沌并联同步方案,对可能存在的两种同步——广义同步和完全同步进行了研究,着重讨论了激光器内部参数失配对发射与接收激光器之间以及并联接收激光器之间同步特性的影响.研究结果显示：在一定范围内,同样的内部参数失配下,并联接收激光器之间的同步效果明显优于发射激光器与接收激光器之间的同步效果. 关键词： 半导体激光器 混沌同步 光电反馈 参数失配     

封面说明

激光器是20世纪最重大的技发明之一,今年是激光器发明50周年.第一台激光器是梅曼(T.Maiman)制成的红宝石激光器,于1960年5月16日开始运转.     

大功率半导体激光器研究进展

对半导体激光器的发展历史和发展现状进行了综述,并具体介绍了长春光学精密机械与物理研究所近年来在大功率半导体激光器方面所取得的主要进展,特别是在大功率半导体激光器的激光光源、垂直腔面发射激光器和新型激光器芯片等方面。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.