Transition Between Solid-like and Liquid-like States in Soft Silica Suspensions

The influences of silica volume fraction, electrolyte concentration and pH value upon the stress dependence of elastic modulus G′and viscous modulus G“ were investigated. The results show that the suspension transforms from a liquid-like state to a solid-like state with increasing the volume fraction of silica. Such a solid-like state can be transformed back into a liquid-like state under the application of a larger stress. At the higher volume fraction, the larger critical stress is required to induce the transition from solid-like to liquidlike state. As the electrolyte concentration decreases or pH value increases, the inter-particle force increases,which causes the state transition to occur at a higher stress.     

Grafting of poly(sodium styrenesulfonate) onto gold surface from NaNO<Subscript>3</Subscript> solution

The chemical grafting of thiol terminated poly(sodium styrenesulfonate)(HS-PSSS) chains from sodium nitrate (NaNO_3) salt solution to a gold surface was investigated with a quartz crystal microbalance with dissipation monitoring (QCM-D) in different salt concentrations.It was found that at low salt concentration grafting density of HS-PSSS was low and the grafted chains adopted a mushroom conformation.With the increase of salt concentration polyelectrolyte chains underwent a transition toward coiled stat...     

Is Water Physisorption Reversible for TiO_2 Nanocrystals？ A Combinational Spectral Study

In this work,the nature of physisorbed water and its impacts on the structure,surface chemistry,and proton conduction properties of TiO2 nanocrystals were investigated by a combinational spectral technique.All TiO2 nanocrystals were directly prepared by a hydrothermal method,which showed highly hydrated and sulfated surfaces.The surface water molecules were indicated to exist in a wide set of energetically nonequivalent surface hydration groups,leading to the removal of physisorbed and chemisorbed water in sequence with increasing temperature.After heating treatment at 100 ℃ in air,physisorbed water layers were recovered with no significant impacts on the TiO2 nanostructure.On the other hand,when treated at the same temperature in vacuum,the recovery of physisorbed water layers was partially reversible,while a new hydration state appeared due to the filling of the high-energy adsorption sites by water molecules,which led to a significant increase in the amount of water molecules for surface hydration and an accelerated dehydration process toward lower temperature.As a result,an abnormal increase was observed in proton conductivity.These observations were explained in terms of thermally induced changes of surface chemistry and the amount of hydrated water.The results reported in this work are important,which may help understand the roles that the physisorbed water plays in stabilizing the nanostructures and therefore could have a broad class of implications.     

Hierarchical self-assembly of 3D amphiphilic discrete organoplatinum(Ⅱ)metallacage in water

Here we described the design and synthesis of a discrete 3D amphiphilic metallacage 4,in which the tetragonal prismatic frameworks act as the hydrophobic cores and the poly(ethylene glycol)(PEG)chains as the hydrophilic tails.The structure of 4 was characterized by 1H NMR,31P NMR and electrospray ionization time-of-flight mass spectrometry(ESI-TOF-MS).Notably,4 with its Iong PEG tails was subsequently ordered into micelles at a low concentration(1.20×10^-6 mol/L)in water.As the concentration and cultivation time increased,the micelles can further self-assembly into nanofibers and nanoribbons.Considering the dynamic property of the coordination bond,these structures show reversible transformation under external stimuli.     

Theoretical Studies on Reaction Mechanism of CH3SO with NO

The potential energy surface （PES） of CH3SO radical with NO reaction has been studied at MP2/6-311G（2df, p） and QCISD/6-311G（2df, p） levels. Geometries of the reactants, transition states （TS） and products were optimized at B3LYP/6-311G （d,p） level. The geometries of the transition states were found for the first time. The calculated results show that the reaction can proceed via singlet-state or triplet-state PES. Because of the high energy barrier of triplet surface, the singlet surface reactions are dominant. The topological analysis of electron density shows that there are two kinds of structaral transition states （the bifurcation-type ring structure transition state and the T-shaped conflict structure transition state） in the titled reaction. The total electronic density of the reactants, TS and products and the spin electronic density on the triplet surface were also discussed in this paper.     

Changes of the Molecular Mobility of Poly(<Emphasis Type="Italic">ε</Emphasis>-caprolactone) upon Drawing,Studied by Dielectric Relaxation Spectroscopy

Dielectric relaxation spectroscopy (DRS) of poly(ε-caprolactone) with different draw ratios showed that the mobility of polymer chains in the amorphous part decreases as the draw ratio increases.The activation energy of the α process,which corresponds to the dynamic glass transition,increases upon drawing.The enlarged gap between the activation energies of the αprocess and the β process results in a change of continuity at the crossover between the high temperature a process and the α and β processes.At low drawing ratios the a process connects with the βprocess,while at the highest drawing ratio in our measurements,the a process is continuous with the a process.This is consistent with X-ray diffraction results that indicate that upon drawing the polymer chains in the amorphous part align and densify upon drawing.As the draw ratio increases,the α relaxation broadens and decreases its intensity,indicating an increasing heterogeneity.We observed slope changes in the α traces,when the temperature decreases below that at which τα ≈ 1 s.This may indicate the glass transition from the ‘rubbery’ state to the non-equilibrium glassy state.     

Changes of the Molecular Mobility of Poly(ε-caprolactone) upon Drawing,Studied by Dielectric Relaxation Spectroscopy

Dielectric relaxation spectroscopy(DRS) of poly(ε-caprolactone) with different draw ratios showed that the mobility of polymer chains in the amorphous part decreases as the draw ratio increases. The activation energy of the α process, which corresponds to the dynamic glass transition, increases upon drawing. The enlarged gap between the activation energies of the α process and the β process results in a change of continuity at the crossover between the high temperature a process and the α and β processes. At low drawing ratios the a process connects with the β process, while at the highest drawing ratio in our measurements, the a process is continuous with the αprocess. This is consistent with X-ray diffraction results that indicate that upon drawing the polymer chains in the amorphous part align and densify upon drawing. As the draw ratio increases, the α relaxation broadens and decreases its intensity, indicating an increasing heterogeneity. We observed slope changes in the α traces, when the temperature decreases below that at which τα≈ 1 s. This may indicate the glass transition from the ‘rubbery' state to the non-equilibrium glassy state.     

Molecular dynamics simulations of the hydration of poly(vinyl methyl ether):Hydrogen bonds and quasi-hydrogen bonds

Atomistic detailed hydration structures of poly(vinyl methyl ether)(PVME) have been investigated by molecular dynamics simulations under 300 K at various concentrations. Both radial distribution functions and the distance distributions between donors and acceptors in hydrogen bonds show that the hydrogen bonds between the polymer and water are shorter by 0.005 nm than those between water molecules. The Quasi-hydrogen bonds take only 7.2% of the van der Waals interaction pairs. It was found the hydrogen bonds are not evenly distributed along the polymer chain,and there still exists a significant amount(10%) of ether oxygen atoms that are not hydrogen bonded to water at a concentration as low as 3.3%. This shows that in polymer solutions close contacts occur not only between polymer chains but also between chain segments within the polymer,which leads to inefficient contacts between ether oxygen atoms and water molecules. Variation of the quasi-hydrogen bonds with the concentration is similar to that of hydrogen bonds,but the ratio of the repeat units forming quasi-hydrogen bonds to those forming hydrogen bonds approaches 0.2. A transition was found in the demixing enthalpy at around 30% measured by dynamic testing differential scanning calorimetry(DTDSC) for aqueous solutions of a mono-dispersed low molecular weight PVME,which can be related to the transition of the fractions of hydrogen bonds and quasi-hydrogen bonds at ～27%. The transition of the fractions of hydrogen bonds and quasi-hydrogen bonds at ～27% can be used to explain the demixing enthalpy transition at 30% at a molecular scale. In addition,at the concentration of 86%,each ether oxygen atom bonded with water is assigned 1.56 water molecules on average,and 'free' water molecules emerge at the concentration of around 54%.     

3~A’ and 3~A” Energy Surfaces for the VS~ CO_2 →VO~ COS Reaction

The title reaction proceeds via a one- and two-step mechanism along the 3A" and 3A’ surfaces, respectively. The 3A’ excited state surface has a lower barrier than the 3A" ground state surface (11.6 and 16.0 kcal/mol, respectively). We suggest that, at low energies, the reaction proceeds along the A’ surface and then makes an intersystem crossing to the A" surface and yields the ground state product VO (3∑-), which may explain the small VO cross-section at low energies observed in the experiment     

^3A＇ and ^3A＂ Energy Surfaces for the VS^＋ ＋ CO2→VO^＋ ＋ COS Reaction

The title reaction proceeds via a one- and two-step mechanism along the ^3A＂ and ^3A＇ surfaces, respectively. The ^3A＇ excited state surface has a lower barrier than the ^3A＂ ground state surface （11.6 and 16.0 kca1/mol, respectively）, We suggest that, at low energies, the reaction proceeds along the A＇ surface and then makes an intersystem crossing to the A＂ surface and yields the ground state product VO^＋（^3∑^-）, which may explain the small VO^＋ cross-section at low energies observed in the experiment     

pH响应性表面对蛋白质吸附的调控

通过表面引发原子转移自由基聚合在固定了引发剂的硅表面接枝了聚甲基丙烯酸叔丁酯(PtBMA),而后通过水解得到聚甲基丙烯酸(PMAA)聚合物刷.通过X射线光电子能谱、椭圆偏振仪和水接触角测试证明了接枝改性的成功.研究发现PMAA改性表面的浸润性和对蛋白质的吸附行为都具有一定的pH响应性.在较低pH值时改性表面相对疏水,随...     

Smart assembly behaviors of hydroxypropylcellulose-graft-poly(4-vinyl pyridine) copolymers in aqueous solution by thermo and pH stimuli

Thermo- and pH-sensitive graft copolymers, hydroxypropylcellulose-graft-poly(4-vinyl pyridine) (HPC-g-P4VP), were synthesized via atom transfer radical polymerization (ATRP) and characterized. The thermo- and pH-induced micellization and stimuli-responsive properties of HPC-g-P4VP graft copolymers in aqueous solution were investigated by transmittance, (1)H NMR, dynamic light scattering (DLS), and so on. For the pH-induced micellization, the P4VP side chains collapse to form the core of the micelles, and the HPC backbones stay in the shell to stabilize the micelles. In the case of thermoinduced micellization, the HPC backbones collapse to form the core of the micelles that was stabilized by the P4VP side chains in the shell upon heating. What's more, the cloud point of the HPC-g-P4VP copolymers in the aqueous solution could be finely tuned by changing the length of P4VP side chains or the pH values. In acidic water, the longer the side chains, the higher the cloud point. For those HPC-g-P4VP copolymers with short side chains, for example, HPC0.05-g-P4VP(3), the lower pH correlates a higher cloud point. The thermo- or pH-induced micelles also have the pH- or thermosensitivity due to their P4VP or HPC shells.     

Preparation and pH triggered inversion of vesicles from poly(acrylic acid)-block-polystyrene-block-poly(4-vinyl pyridine)

The aggregate morphologies of the biamphiphilic triblock PAA(26)-b-PS(890)-b-P4VP(40) have been studied by TEM as a function of pH in DMF/THF/H(2)O mixtures. The outside surfaces of the aggregates were characterized by zeta potential measurements. Starting at the apparent pH (pH) of 1, and increasing gradually to pH14, the aggregate morphologies of this triblock change progressively from vesicles (pH1), to solid spherical or ellipsoidal aggregates (pH3 approximately 11), and finally back to vesicles (pH14). Vesicles prepared at pH1 contain P4VP chains on the outside and PAA chains on the inside, while those prepared from the same triblock at pH14 contain PAA outside and P4VP inside. The segregation is based on the difference in repulsive interactions within the PAA or P4VP corona under different pH conditions. At low pH, the curvature is stabilized through increased repulsive interactions between the P4VP chains on the outside relative to the less repulsive interactions between the PAA chains on the inside. At pH14, by contrast, the PAA is preferentially segregated to the outside and the P4VP to the inside because of the increased repulsive interaction between PAA chains and the decreased repulsive interaction between P4VP chains at high pH. Most importantly, vesicles with PAA on the outside can be inverted to P4VP on the outside by changing the pH while the vesicles have swollen cores and are under dynamic conditions. The conversion mechanism is suggested to involve a whole vesicle process because the CMC is far too low for single chain reassembly to be involved.     

带有可调通道的嵌段共聚物胶束对药物的控制释放

用聚丙烯酸叔丁酯-b-聚乙二醇(PtBA45-b-PEG114)和聚丙烯酸叔丁酯-b-聚4-乙烯基吡啶(PtBA60-b-P4VP80)制备了复合胶束. 该胶束在pH=2.5的酸性水溶液中形成以PtBA为核, PEG和P4VP为壳的稳定球型结构. 在pH=12时, 壳层的P4VP链段变为疏水, 塌缩在PtBA的核上形成内壳, PEG链段继续保持溶解状态, 与成核的PtBA连接并穿过塌陷的P4VP内壳, 形成胶束的冠, 由于PEG处于溶解状态, 其分子链间有比较大的空隙, 可以控制一些小分子通过, 在胶束的表面形成通道. 该通道类似于生物膜的蛋白通道, 可以控制PtBA核与外界进行能量或物质交换的速度. 以布洛芬为模型分子, 负载在胶束内进行药物控制释放研究的结果表明, 胶束表面的通道可以起到明显控制布洛芬释放速度的作用, 并且药物的释放速度与通道在胶束表面的比例成正比.     

Synthesis of basic molecular brushes: ATRP of 4-vinylpyridine in organic media

A poly(2-(2-bromopropionyloxy)ethyl methacrylate) (PBPEM) was used as macroinitiator in the synthesis of molecular brushes with poly(4-vinylpyridine) side chains, (P(BPEM-g-4VP). Atom transfer radical polymerization (ATRP) was employed as the polymerization technique. The polymerizations were carried out in DMF at 30 °C using a copper-chloride-based ATRP catalyst, which converted all the dormant polymer chain ends to alkyl chloride groups, thus minimizing branching and crosslinking, which occurred when a copper bromide-based catalyst was employed. Tris(2-pyridylmethyl)amine was selected as the ligand due to the high activity of its Cu^I complex in ATRP as well as its strong binding to both Cu^I and Cu^II, which prevented competitive complexation of the monomer or polymer to the metal center. In order to prevent crosslinking via radical coupling, the monomer conversion was kept low (under 3%) and the alkyl chloride end groups of P4VP side chains were converted to alkoxyamines upon activation followed by a reaction with TEMPO radical. Dynamic light scattering measurements showed the hydrodynamic diameter (D_H) of the brushes was pH-dependent. Aggregation of single P(BPEM-g-4VP) brushes in water was very pronounced at high pH values but was observed even when the amount of added HCl was enough to completely protonate the pyridine units (D_H = 278 nm).     

A Facile Method to Form a Densely Grafted PEO‐b‐P4VP Brush on Gold Surface

Here we report a facile method for the preparation of a PEO₁₁₃‐b‐P4VP₉₃ brush on gold surface with a grafting density as high as 1.32 chains/nm²; the P4VP blocks were physically adsorbed on gold surface forming an inner layer while the PEO blocks stretched towards the solution forming PEO brush. PEO₁₁₃‐b‐P4VP₉₃ micelles with P4VP core and PEO shell formed in methanol/water mixed solvents were used as the precursor. By adsorbing PEO₁₁₃‐b‐P4VP₉₃ micelles from pure water, in which the density of the micelles is the largest, maximum amount of the micelles was adsorbed onto gold surface, and the adsorbed micelles existed as individual domains on the surface. To prepare the polymer brush with a density as high as possible, we annealed the adsorbed micelles by methanol/water mixed solvent at the volume fraction of methanol (VF) of 20%, which was the proper proportion at which the core‐forming P4VP chains began to be flexible but the integrity of the micelles was remained. At this volume fraction, almost all the adsorbed micelles originally existing as individual domains were transformed into a dense polymer brush.     

聚4-乙烯基吡啶与Cu(Ⅱ)离子配合过程及配合物的结构

采用粘度法确定了聚4-乙烯基吡啶(P4VP)在乙醇/水混合溶剂中的临界交迭浓度c*, 分别在稀溶液与亚浓溶液浓度范围内, 采用光谱法与电导滴定法研究了P4VP与Cu(II)离子的配合过程及配合物的结构, 通过红外光谱(FTIR)对配合物的化学结构进行了表征, 并用差示扫描量热法(DSC)测定了配合物的热性能. 结果表明, 对于相对分子质量为1.06×105的P4VP, 其c*为15 mmol&#8226;L&#8722;1(按P4VP中的链节量计算). 在稀溶液中P4VP与Cu(II)离子形成可溶性的分子内配合物, 表观配位数为9~10；在亚浓溶液中, P4VP与Cu(II)离子发生分子间配合作用, 由于配位交联, 形成不溶性的配合物P4VP-Cu(II), 配位数为3. P4VP与Cu(II)离子形成配合物后, 玻璃化温度明显提高.     

pH-Responsive Films of Electrostatically Adsorbed Arborescent Copolymers

The adsorption of charged dendrigraft (arborescent) copolymers of different generations (G1, G2) and side chain molecular weights (M_n ≈ 5000 or 30,000) on silica surfaces in water, was monitored by the quartz crystal microbalance dissipation (QCM-D) technique. The topology of the adsorbed copolymers on mica was also investigated by AFM measurements. The PS-P2VP [polystyrene-graft-poly(2-vinylpyridine)] copolymers readily interact with a silica or mica surface and form a thin layer in acidic water (pH 2) due to the positively charged P2VP shell branches. The adsorbed arborescent PS-P2VP films expanded and collapsed reversibly in water upon cycling between low and high pH values, respectively. As the generation number increased, the density of copolymer molecules adsorbed onto the surface decreased due to stronger intermolecular electrostatic repulsions. The adsorption density also decreased significantly for copolymers with longer P2VP chains due to their more expanded conformation on the surface.     

Transport of organic and inorganic solutes through charged mosaic composite membranes

A template pattern with alternating poly(4-vinylpyridine) (P4VP)/poly(vinyl alcohol) (PVA) lamellae was fabricated upon a microporous poly(vinyl chloride) (PVC) membrane by casting of poly[4-vinylpyridine(4VP)-g-vinyl alcohol (VA)] graft copolymer. After a treatment of both binding of microporous membrane with graft copolymer and domain fixing of the PVA matrix, a dilute solution of poly[acrylic acid (AA)-benzyl N,N-dimethyldithiocarbamate (DMTC)]/P4VP or poly[sodium p-styrenesulfonate (SSS)-DMTC]/P4VP binary blend was cast on this template surface. Two types of weak acid/strong base or strong acid/strong base microdomains formed by phase growth were oriented perpendicularly to the membrane surface. After the chemical treatments: introduction of the charge and domain fixing of ion exchange regions, two types of such mosaic microdomains could be constructed on a microporous membrane. We studied the transport behaviors of organic and inorganic solutes through charged mosaic composite membranes. The permeability of inorganic electrolyte, such as KCl was about 20-fold compared to those of organic nonelectrolytes, such as glucose and sucrose. l-Phenylalanine exhibits a low value of permeability at the pH of its isoelectric point.     

Adsorption of poly(N-isopropylacrylamide-co-4-vinylpyridine) onto core-shell poly(styrene-co-methylacrylic acid) microspheres

Adsorption of the thermoresponsive copolymer of poly(N-isopropylacrylamide-co-4-vinylpyridine) (PNIPAM-co-P4VP) onto the core-shell microspheres of poly(styrene-co-methylacrylic acid) (PS-co-PMAA) is studied. The core-shell PS-co-PMAA microspheres are synthesized by one-stage soap-free polymerization in water. The copolymer of PNIPAM-co-P4VP is synthesized by free radical polymerization of N-isopropylacrylamide and 4-vinylpyridine in the mixture of DMF and water using K₂S₂O₈ as initiator. Adsorption of PNIPAM-co-P4VP onto the core-shell PS-co-PMAA microspheres results in formation of the composite microspheres of PS/PMAA-P4VP/PNIPAM. The driven force to adsorb the copolymer of P4VP-co-PNIPAM onto the core-shell PS-co-PMAA microspheres is ascribed to hydrogen-bonding and electrostatic affinity between the P4VP and PMAA segments. The resultant composite microspheres of PS/PMAA-P4VP/PNIPAM with surface chains of PNIPAM are thermoresponsive in water and show a cloud-point temperature at about 33 °C.