Stability constants of Np(V) complexes with fluoride and sulfate at variable temperatures

Summary A solvent extraction method was used to determine the stability constants of Np(V) complexes with fluoride and sulfate in 1.0M NaClO₄ from 25 to 60 °C. The distribution ratio of Np(V) between the organic and aqueous phases was found to decrease as the concentrations of fluoride and sulfate were increased. Stability constants of the 1 : 1 Np(V)-fluoride complexes and the 1 : 1 Np(V)-sulfate and 1 : 2 Np(V)-sulfate complexes, dominant in the aqueous phase under the experimental conditions, were calculated from the effect of [F^-] and [SO₄^2-] on the distribution ratio. The enthalpy and entropy of complexation were calculated from the stability constants at different temperatures by using the Van't Hoff equation.     

Studies on fluoride complexing of hexavalent actinides using a fluoride ion selective electrode

Complex formation between actinide(VI) and fluoride ions in aqueous solutions has been investigated using a fluoride ion selective electrode (F-ISE). As fairly high acidity was used to suppress hydrolysis of the actinide(VI) ions, significant liquid junction potentials (E_j) existed in the systems. An iterative procedure was developed for computing free hydrogen ion concentration [H⁺], as it could not be measured directly, using data obtained with F-ISE. E_j values were estimated from known [H⁺] and the stability constants of fluoride complexes of actinide(VI) ions were calculated following KING and GALLAGHER's method using a computer program. The stability constants were found to follow the order U(VI)>Np(VI)>Pu(VI).     

Crystal and electronic structures of neptunium nitrides synthesized using a fluoride route

A low-temperature fluoride route was utilized to synthesize neptunium mononitride, NpN. Through the development of this process, two new neptunium nitride species, NpN(2) and Np(2)N(3), were identified. The NpN(2) and Np(2)N(3) have crystal structures isomorphous to those of UN(2) and U(2)N(3), respectively. NpN(2) crystallizes in a face-centered cubic CaF(2)-type structure with a space group of Fm3m and a refined lattice parameter of 5.3236(1) ?. The Np(2)N(3) adopts the body-centered cubic Mn(2)O(3)-type structure with a space group of Ia3. Its refined lattice parameter is 10.6513(4) ?. The NpN synthesis at temperatures ≤900 °C using the fluoride route discussed here was also demonstrated. Previous computational studies of the neptunium nitride system have focused exclusively on the NpN phase because no evidence was reported experimentally on the presence of NpN(x) systems. Here, the crystal structures of NpN(2) and Np(2)N(3) are discussed for the first time, confirming the experimental results by density functional calculations (DFT). These DFT calculations were performed within the local-density approximation (LDA+U) and the generalized-gradient approximation (GGA+U) corrected with an effective Hubbard parameter to account for the strong on-site Coulomb repulsion between Np 5f electrons. The effects of the spin-orbit coupling in the GGA+U calculations have also been investigated for NpN(2) and NpN.     

Optically “silent” neptunium(V)-nitrate complex in ionic liquid

The complexation of pentavalent neptunium, Np(V), with nitrate ion in an ionic liquid solution has been studied spectroscopically for the first time. The characteristic f-f transition absorption band of Np(V) in the NIR region changes significantly upon the titration of nitrate ion into the solution, revealing strong complexation of Np(V) with nitrate ion in the ionic liquid. Most notably, the absorption band of Np(V) almost disappears when a sufficiently high concentration of nitrate ion is present in the solution. Such a rare optically “silent” species can be assigned to the 1:2 Np(V)/nitrate complex with a centrosymmetric coordination environment where Np sits at the inversion center.     

Thermal stability and degradation kinetic study of white and colored cotton fibers by thermogravimetric analysis

Complexation of neptunium(V) with fluoride in aqueous solutions at elevated temperatures was studied by spectrophotometry and microcalorimetry. Two successive complexes, NpO₂F(aq) and NpO₂F₂⁻, were identified by spectrophotometry in the temperature range of 10–70°C. Thermodynamic parameters, including the equilibrium constants and enthalpy of complexation between Np(V) and fluoride at 10–70°C were determined. Results show that the complexation of Np(V) with fluoride is endothermic and that the complexation is enhanced by the increase in temperature — a two-fold increase in the stability constants of NpO₂F(aq) and more than five-fold increase in the stability constants of NpO₂F₂⁻ as the temperature is increased from 10 to 70°C.     

A voltammetric method for fluoride

A voltammetric method for the determination of micro amounts of fluoride is described. It is based on the measurement of the amount of free alizarin red S liberated by the fluoride ion from a zirconium-alizarin red S complex. The free dye measurement carried out at 0.7 V vs. S.C.E. depends on the anodic reaction of alizarin red S at the rotating pyrolytic graphite electrode. The method is simple, sensitive and suffers from relatively few interferences.     

Adsorption of fluoride ions onto carbonaceous materials

The characteristics of fluoride ion adsorption onto carbonaceous materials were derived as adsorption isotherms at different temperatures and in different pH solutions. The fluoride ion was adsorbed into pores in carbonaceous materials produced from wood; the larger the specific surface area, the more fluoride ions adsorbed. Bone char was the most effective adsorbent. The composition of bone char includes calcium phosphate, calcium carbonate, and so on. This suggests that the phosphate ion in bone char was exchanged with a fluoride ion. Moreover, the mechanism of fluoride ion adsorption onto bone char is clearly chemical in nature because the amount of fluoride ion adsorbed onto bone char increased with increasing temperature and decreasing pH. The amount of fluoride ion adsorbed onto bone char was also shown to depend on the concentration of sodium chloride in solution because of the "salting-out" effect. The adsorption of fluoride ion onto bone char is endothermic. Bone char can be utilized to remove fluoride ions from drinking water.     

Quantitative measure for the "nakedness" of fluoride ion sources

A quantitative measure for the donor strength or "nakedness" of fluoride ion donors is presented. It is based on the free energy change associated with the transfer of a fluoride ion from the donor to a given acceptor molecule. Born-Haber cycle calculations were used to calculate both the free energy and the enthalpy change for this process. The enthalpy change is given by the sum of the fluoride ion affinity of the acceptor (as defined in strict thermodynamic convention) and the lattice energy difference (DeltaU(POT)) between the fluoride ion donor and the salt formed with the acceptor. Because, for a given acceptor, the fluoride affinity has a constant value, the relative enthalpy (and also the corresponding free energy) changes are governed exclusively by the lattice energy differences. In this study, BF(3), PF(5), AsF(5), and SbF(5) were used as the acceptors, and the following seven fluoride ion donors were evaluated: CsF, N(CH(3))(4)F (TMAF), N-methylurotropinium fluoride (MUF), hexamethylguanidinium fluoride (HMGF), hexamethylpiperidinium fluoride (HMPF), N,N,N-trimethyl-1-adamantylammonium fluoride (TMAAF), and hexakis(dimethylamino)phosphazenium fluoride (HDMAPF). Smooth relationships between the enthalpy changes and the molar volumes of the donor cations were found which asymptotically approach constant values for infinitely large cations. Whereas CsF is a relatively poor F(-) donor [(U(POT)(CsF) - U(POT)(CsSbF(6))) = 213 kJ mol(-)(1)], when compared to N(CH(3))(4)F [(U(POT)(TMAF) - U(POT)(TMASbF(6))) = 69 kJ mol(-)(1)], a 4 times larger cation (phosphazenium salt) and an infinitely large cation are required to decrease DeltaU(POT) to 17 and 0 kJ mol(-)(1), respectively. These results clearly demonstrate that very little is gained by increasing the cation size past a certain level and that secondary factors, such as chemical and physical properties, become overriding considerations.     

Electron transfer in neptunyl(VI)-neptunyl(V) complexes in solution

The rates and mechanisms of the electron self-exchange between Np(V) and Np(VI) in solution have been studied with quantum chemical methods and compared with previous results for the U(V)-U(VI) pair. Both outer-sphere and inner-sphere mechanisms have been investigated, the former for the aqua ions, the latter for binuclear complexes containing hydroxide, fluoride, and carbonate as bridging ligand. Solvent effects were calculated using the Marcus equation for the outer-sphere reactions and using a nonequilibrium PCM method for the inner-sphere reactions. The nonequilibrium PCM appeared to overestimate the solvent effect for the outer-sphere reactions. The calculated rate constant for the self-exchange reaction NpO2(+)(aq) + NpO2(2+)(aq) right harpoon over left harpoon NpO2(2+)(aq) + NpO2(+)(aq), at 25 degrees C is k = 67 M(-1) s(-1), in fair agreement with the observed rates 0.0063-15 M(-1) s(-1). The differences between the Np(V)-Np(VI) and the U(V)-U(VI) pairs are minor.     

Spin-orbit effects in electron transfer in neptunyl(VI)-neptunyl(V) complexes in solution

The spin-orbit effects were investigated on the complexes involved in the electron self-exchange between Np(V) and Np(VI) in both the outer-sphere and inner-sphere mechanisms, the latter for binuclear complexes containing hydroxide, fluoride, and carbonate as bridging ligands. Results obtained with the variation-perturbation and the multireference single excitation spin-orbit CI calculations are compared. Both effects due to different relaxations of spinors within a multiplet (spin-orbit relaxation) and scalar (electrostatic) relaxation effects in the excited states are accounted for in the latter scheme. The results show that the scalar (electrostatic) relaxation is well described by the single-excitation spin-orbit CI, and that spin-orbit relaxation effects are small in the Np complexes, as in the lighter d-transition elements but in contrast to the main group elements.     

Extraction of antimony and tantalum from aqueous fluoride solutions by n-octanol and tributyl phosphate

¹⁹F and ²¹Sb NMR spectroscopy and chemical analysis were used to study the composition and structure of fluoride complexes of antimony(V) and tantalum(V) in organic and aqueous phases in extraction by tributyl phosphate (TBP) and n-octanol. It is found that extraction from solutions containing a single element or both elements occurs via the hydrate-solvate mechanism. The possibility of separating tantalum(V) and antimony(V) by extraction from fluoride solutions is shown. The efficiency of tantalum(V) and antimony(V) separation by extraction from fluoride solutions is enhanced at a transition from TBP to n-octanol.     

Removal of fluoride from water through ion exchange by mesoporous Ti oxohydroxide

In our previous study, we found that Ti(OH)(4) exhibited fluoride ion exchange properties. In order to improve the ion exchange capacity, mesoporous Ti oxohydroxide (TiOx(OH)y) had been prepared by using dodecylamine as template. Zirconia and silica had been introduced into the mesoporous Ti oxohydroxide to enhance the ion exchange capacity. The mesoporous structure and the morphology of the mesoporous materials obtained were confirmed using XRD and SEM, respectively. A fluoride ion exchange study was done on each sample. Results showed that mesoporous Ti oxohydroxide containing zirconia exhibited the highest fluoride ion exchange capacity, as it has the smallest particle size, with high uniformity among the mesoporous materials prepared.     

Colorimetric fluoride ion sensing by boron-containing pi-electron systems.

The boron-containing pi-conjugated systems, including tri(9-anthryl)borane (1) and tris[(10-dimesitylboryl)-9-anthryl]borane (2), have been investigated as a new type of fluoride chemosensor. Upon complexation of 1 with a fluoride ion, a significant color change from orange to colorless was observed and, in the UV-visible absorption spectra, the characteristic band of 1 at 470 nm disappeared and new bands around 360-400 nm assignable to pi-pi transitions of the anthryl moieties were observed. This change can be rationalized as a result of the interruption of the pi-conjugation extended through the vacant p-orbital of the boron atom by the formation of the corresponding fluoroborate. The binding constant of compound 1 with the fluoride ion was quite high [(2.8 +/- 0.3) x 10(5) M(-1)], whereas 1 only showed small binding constants with AcO- and OH- of around 10(3) M(-1) and no sensitivity to other halide ions such as Cl-, Br-, and I-, thus demonstrating its selective sensing ability to the fluoride ion. In contrast to the monoboron system 1, compound 2 having four boron atoms showed multistage changes in the absorption spectra by the stepwise complexation with fluoride ions.     

Novel fluorogenic probe for fluoride ion based on the fluoride-induced cleavage of tert-butyldimethylsilyl ether

A highly sensitive and selective fluorogenic probe for fluoride ion, 4-methylumbelliferyl tert-butyldimethylsilyl ether (4-MUTBS), was designed and synthesized. 4-MUTBS was a weakly fluorescent compound and was synthesized via the one-step reaction of 4-MU with tert-butyldimethylsilyl chloride. Upon incubation with fluoride ion in acetone-water solution (7:3, v/v), the Si-O bond of 4-MUTBS was cleaved and highly fluorescent 4-methylumbelliferone (4-MU) was released, hence leading to the fluorescence increase of the reaction solution. The fluorescence increase is linearly with fluoride concentration in the range 50-8000 nmol l(-1) with a detection limit of 19 nmol l(-1) (3sigma). Because of the high affinity of silicon toward fluoride ion, the proposed probe shows excellent selectivity toward fluoride ion over other anions. The method has been successfully applied to the fluoride determination in toothpaste and tap water samples.     

A theoretical study of the inner-sphere disproportionation reaction mechanism of the pentavalent actinyl ions

The inner-sphere mechanisms of the disproportionation reactions of U(V), Np(V), and Pu(V) ions have been studied using a quantum mechanical approach. The U(V) disproportionation proceeds via the formation of a dimer (a cation-cation complex) followed by two successive protonations at the axial oxygens of the donor uranyl ion. Bond lengths and spin multiplicities indicate that electron transfer occurs after the first protonation. A solvent water molecule then breaks the complex into solvated U(OH)2(2+) and UO2(2+) ions. Pu(V) behaves similarly, but Np(V) appears not to follow this path. The observations from quantum modeling are consistent with existing experimental data on actinyl(V) disproportionation reactions.     

Colorimetric probes based on anthraimidazolediones for selective sensing of fluoride and cyanide ion via intramolecular charge transfer

Probes based on anthra[1,2-d]imidazole-6,11-dione were designed and synthesized for selective ion sensing. Each probe acted as strong colorimetric sensors for fluoride and cyanide ions and exhibited intramolecular charge transfer (ICT) band, which showed significant red-shifts after addition of either the F(-) or CN(-) ion. One of the probes (2) showed selective colorimetric sensing for both cyanide and fluoride ions. In organic medium, 2 showed selective color change with fluoride and cyanide, whereas in aqueous organic medium it showed a ratiometric response selectively for cyanide ion.     

Electrochemical and complexation behavior of neptunium in aqueous perchlorate and nitrate solutions

Electrochemical and complexation properties of neptunium (Np) are investigated in aqueous perchlorate and nitrate solutions by means of cyclic voltammetry, bulk electrolysis, UV-visible absorption, and Np L(III)-edge X-ray absorption spectroscopies. The redox reactions of Np(III)/Np(IV) and Np(V)/Np(VI) couples are reversible or quasi-reversible, while the electrochemical reaction between Np(III/IV) and Np(V/VI) is irreversible because they undergo structural rearrangement from spherical coordinating ions (Np(3+) and Np(4+)) to transdioxoneptunyl ions (NpO2(n+), n = 1 for Np(V) and 2 for Np(VI)). The redox reaction of the Np(V)/Np(VI) couple involves no structural rearrangement on their equatorial planes in acidic perchlorate and nitrate solutions. A detailed analysis on extended X-ray absorption fine structure (EXAFS) spectra suggests that Np(IV) forms a decaaquo complex of [Np(H2O)10](4+) in 1.0 M HClO4, while Np(V) and Np(VI) exist dominantly as pentaaquoneptunyl complexes, [NpO2(H2O)5](n+) (n = 1 for Np(V) and 2 for Np(VI)). A systematic change is observed on the Fourier transforms of the EXAFS spectra for all of the Np oxidation states as the nitrate concentration is increased in the sample, revealing that the hydrate water molecules are replaced by bidentate-coordinating nitrate ions on the primary coordination sphere of Np.     

Complexation of Np(V) with oxalate at 283-343 K: spectroscopic and microcalorimetric studies

Thermodynamic parameters including the equilibrium constants and enthalpy of complexation of Np(V) with oxalate at variable temperatures (T = 283-343 K, ionic strength = 1.05 mol kg(-1) NaClO(4)) were determined by spectrophotometric and microcalorimetric titrations. The results show that the complexation of Np(V) with oxalate is moderately strong and becomes weaker at higher temperatures. The complexation is exothermic and driven by both enthalpy (negative) and entropy (positive) in the temperature range from 283 K to 343 K. As the temperature is increased, both the enthalpy and entropy of complexation increase (ΔH becomes less negative and ΔS becomes more positive), having opposing effects on the complexation. Because the increase in the enthalpy (ΔH) exceeds that of the entropy term (TΔS), the complexation of Np(V) with oxalate becomes weaker at higher temperatures. The effect of temperature on the complexation is discussed in terms of the energetics of ion solvation and hydrogen bonding involved in the complexation.     

Determination of boron by (p, a) reaction

Back-extraction of tri- and tetravalent actinides from diisodecylphosphoric acid (DIDPA) is studied using hydrazine carbonate as back-extractant. In experiments using 0.5M DIDPA–0.1M TBP n-dodecane solution, Am(III), Eu(III), Pu(IV) and Np(IV) are back-extracted, and the distribution ratios are decreased with an increase of hydrazine carbonate concentration. The back-extraction equilibria are confirmed by slope analysis in consideration of neutralization between DIDPA and hydrazine carbonate, which occurs quantitatively during back-extraction. In particular, oxidation of Np(IV) to Np(V) during back-extraction is observed by measuring absorption spectra. The hydrazinium ion acts as an oxidation reagent in the back-extraction of Np(IV). Separation factors of those metals are compared with the results of HDEHP. Hydrazine carbonate back-extracts Np(IV) more selectively from DIDPA than from HDEHP.     

Uptake of Pu(IV) on Bio-Rex 63 from nitric acid medium: A kinetic study

Back-extraction of tri- and tetravalent actinides from diisodecylphosphoric acid (DIDPA) is studied using hydrazine carbonate as back-extractant. In experiments using 0.5M DIDPA–0.1M TBP n-dodecane solution, Am(III), Eu(III), Pu(IV) and Np(IV) are back-extracted, and the distribution ratios are decreased with an increase of hydrazine carbonate concentration. The back-extraction equilibria are confirmed by slope analysis in consideration of neutralization between DIDPA and hydrazine carbonate, which occurs quantitatively during back-extraction. In particular, oxidation of Np(IV) to Np(V) during back-extraction is observed by measuring absorption spectra. The hydrazinium ion acts as an oxidation reagent in the back-extraction of Np(IV). Separation factors of those metals are compared with the results of HDEHP. Hydrazine carbonate back-extracts Np(IV) more selectively from DIDPA than from HDEHP.