Synthesis, photophysical, photochemical, and redox properties of nitrospiropyrans substituted with Ru or Os tris(bipyridine) complexes

Photochromic nitrospiropyrans substituted with 2,2'-bipyridine (bpy), [Ru(bpy)3]2+, and [Os(bpy)3]2+ groups were synthesized, and their photophysical, photochemical, and redox properties investigated. Substitution of the spiropyran with the metal complex moiety results in strongly decreased efficiency of the ring-opening process as a result of energy transfer from the excited spiropyran to the metal center. The lowest excited triplet state of the spiropyran in its open merocyanine form is lower in energy than the excited triplet MLCT level of the [Ru(bpy)3]2+ moiety but higher in energy than for [Os(bpy)3]2+, resulting in energy transfer from the excited ruthenium center to the spiropyran but inversely in the osmium case. The open merocyanine form reduces and oxidizes electrochemically more easily than the closed nitrospiropyran. Like photoexcitation, electrochemical activation also causes opening of the spiropyran ring by first reducing the closed form and subsequently reoxidizing the corresponding radical anion in two well-resolved anodic steps. Interestingly, the substitution of the spiropyran with a Ru or Os metal center does not affect the efficiency of this electrochemically induced ring-opening process, different from the photochemical path.     

Formation of photochromic spiropyran polymer brushes via surface-initiated, ring-opening metathesis polymerization: reversible photocontrol of wetting behavior and solvent dependent morphology changes

In this article, we described a method for the formation of photochromic polymer brushes grafted from oxide surfaces using surface-initiated ring-opening metathesis polymerization of spiropyran-based monomers in the presence of second generation Grubbs catalyst. The growth of the polymer film, as monitored by ellipsometry and atomic force microscopy (AFM), is strongly influenced by the initial concentrations of the catalyst and monomer, as well as reaction time. These densely packed and highly smooth polymer films were successfully used as surfaces with switchable color and wettability using light as the external stimulus. The relatively nonpolar spiropyran can be switched to a polar, zwitterionic merocyanine isomer (with a larger dipole moment) using light of the appropriate wavelength. This process is reversible and can be switched back using visible light. The spiropyran-merocyanine photoinduced isomerization gives a reversible contact angle change up to 15 degrees for smooth Si/SiO 2 substrate under sequential irradiation cycles with UV and visible light. This contact angle change can be amplified by complexing the merocyanine form with metal ions through the phenolate oxygen, which enhances the switching of wettability with these polymer brushes. Irradiation in the presence of cobalt(II) ions gives rise to a contact angle variation as high as 35 degrees . This is the largest change in photoinduced surface wettability observed for a flat substrate. Photoisomerization in spiropyrans also yields a change in the refractive index of the film, which we have investigated using ellipsometric imaging. Lastly, morphological changes accompanying photochromism were investigated using atomic force microscopy. Significant morphological changes can only be induced in the films by irradiating in polar solvents that help to stabilize the merocyanine ring open form.     

Negative photochromism of water-soluble pyridine-containing nitro-substituted spiropyrans

Negative photochromism of pyridine-containing nitro-substituted spiropyrans in solutions, solid phase, and polymer layers, as well as in complexes with terbium cations, has been studied by a spectral-kinetic method. It has been shown that the concentration of the merocyanine form and the efficiency of photochromic transformations depend on the length of the substituent at the nitrogen of the indoline moiety. A distinctive feature of the photochromic transformations of these compounds is slow spontaneous relaxation of the colorless photoinduced spiropyran form to the colored merocyanine form, which becomes practically acceptable only at a temperature of 80°C.     

Molecularly imprinted polymers bearing spiropyran‐based photoresponsive binding sites capable of photo‐triggered switching for molecular recognition activity

Photoresponsive molecularly imprinted nanocavities were prepared using a newly designed functional monomer bearing a photoresponsive spiropyran moiety with a carboxy group that can interact with atrazine (the template molecule), in which the spiropyran moiety was incorporated into the binding cavities. Spectrophotometric analysis confirmed that the spiropyran moiety was photoresponsive even after polymerization. The selectivity of the EDMA‐based molecularly imprinted polymer (MIP_EDMA) was tested to examine the binding behavior of atrazine and other agrochemicals, revealing that the atrazine‐imprinted polymer can bind selectively to triazine herbicides. Photo‐triggered switching of the binding activity in MIP_EDMA was investigated, and the binding activity was found to decrease dramatically after UV light irradiation, suggesting that the spiropyran moiety in the binding cavities was transformed to the merocyanine form, resulting in unfavorable translocation of the carboxy group for atrazine binding. Consequently, the spiropyran‐based MIP_EDMA demonstrated in this study could open a way to realizing reliable photoresponsive smart materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1637–1644     

Induction of Columnar and Smectic Phases for Spiropyran Derivatives: Effects of Acidichromism and Photochromism

Liquid‐crystalline (LC) properties have been induced in a number of spiropyran derivatives by the addition of methanesulfonic acid. Spiropyran derivatives containing one or two gallic acid moieties with one, two, or three long alkyl chains were prepared. Acid‐induced spiro–protonated‐merocyanine isomerization induced mesomorphism for these materials. Equimolar mixtures of methanesulfonic acid and the spiropyran derivatives with one or two dodecyloxy chains exhibited smectic A phases, whereas the spiropyran derivatives containing the gallic acid moiety with three dodecyloxy chains showed hexagonal columnar phases. On the contrary, photoirradiation of the spiropyran compounds in the bulk liquid state did not lead to the induction of mesomorphism, although the merocyanine form was induced. These results suggest that these merocyanine derivatives with ionic and nonionic moieties cannot simply form nanosegregated LC structures. Complex formation of the merocyanine form with methanesulfonic acid may play a key role in the formation of LC molecular assemblies.     

螺吡喃化合物在分析化学中的应用

螺吡喃作为一种有机光致变色化合物,能够发生无色闭环体螺吡喃与有色开环体部花菁之间可逆的结构异构化,由于具有特殊的分子识别能力和信号传导功能,已经成为分子探针领域极具吸引力的主体分子之一。螺吡喃不仅被广泛应用于光电材料领域作为分子器件,而且作为传感器广泛应用于分析化学领域。研究者们设计了多种具有不同结构的螺吡喃分子,将其应用于光化学和电化学传感领域。本文系统综述了螺吡喃化合物在分析化学领域的研究进展,包括螺吡喃作为光学探针在分子识别(对金属离子、阴离子及有机分子的定性及定量分析)方面的应用,以及螺吡喃在电化学免疫传感器中的应用。     

Synthesis of high‐molecular‐weight linear methacrylate copolymers with spiropyran side groups: Conformational changes of single molecules in solution and on surfaces

P(BMA‐co‐HEMA‐spiropyran) was synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization of butyl methacrylate (BMA) and 2‐(trimethylsilyloxy)‐ethyl methacrylate (HEMA‐TMS), removal of the TMS‐protective groups, and the polymer analogous esterification of the hydroxyethyl side chains with a spiropyran containing a carboxylic acid group. UV‐induced conformational changes of the synthesized macromolecules and low‐molecular‐weight spiropyran molecules were studied. Rate constants and half‐life times of the ring closure reaction from zwitterionic merocyanine to the spiropyran species were determined in the presence and absence of mica‐dispersed particles in toluene both with the free spiropyran and the polymer‐bound spiropyran. Scanning force microscopy was used to visualize the conformation of spiropyran‐decorated single macromolecular chains and agglomerated polymer‐bound merocyanine adsorbed on mica. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1274–1283, 2009     

Sequential merocyanine product isomerization following femtosecond UV excitation of a spiropyran

The ring-opening dynamics of the photochromic switch 1',3'-dihydro-1',3',3'-trimethyl-6-nitrospiro[2H-1-benzopyran-2,2'-(2H)-indole] in tetrachloroethene is studied with both femtosecond time-resolved ultraviolet (UV)/visible and UV/mid-infrared (IR) pump-probe spectroscopy. During the first picosecond we identify two new transient features in the UV/vis experiments, the first of which we assign to spiropyran S1 --> S(n) absorption (lifetime < or = 0.2 ps). The second feature (lifetime 0.5 +/- 0.2 ps) we tentatively assign to the merocyanine T2 state. After 1 ps both probing methods show biexponential merocyanine formation kinetics, with average time constants of 17 +/- 3 and 350 +/- 20 ps. In the UV/IR experiments, the initial dynamics show more dispersion in formation times than in the UV/vis measurements, whereas the slower time constant is the same in both. A weak transient IR signal at approximately 1360 cm(-1) demonstrates that this biexponentiality is caused by a sequential isomerization between two merocyanine species. Lifetimes provide evidence that the merocyanine S1 state is not involved in the photochemical reaction.     

光致变色冠醚部花菁染料的合成及其逆光致变色性

作者用含冠醚结构单元的2-甲基-苯并噻唑季铵盐与取代水物醛缩合得到了五个光致变色冠醚部化菁化合物。这些新的冠醚化合物具有逆光致变色性质, 较稳定的结构是开环部花菁式。     

Multi-colored electrochromic polymer with enhanced optical contrast

A new π-conjugated monomer was synthesized which contains an electron-donating unit 3,4-ethylenedioxythiophene and electron withdrawing quinoxaline-based heterocycle to examine the effects of imine unit on the optoelectronic and redox properties of the resulting polymer. Electroactivity of monomer and electrochemical redox behavior of its polymer were investigated by cyclic voltammetry. An irreversible anodic wave at +0.85 V vs Ag wire reference electrode corresponding to the monomer oxidation was observed. Spectroelectrochemical analysis revealed that the neutral polymer has an absorbance at 820 nm. The band gap of the polymer was determined as 1.0 eV from the onset of the π-π∗ transition. The polymer shows multi-colored electrochromic behavior with five distinct states: brick red (−0.3 V), orange (+0.4 V), brown (+0.7 V), green (+0.85 V), gray (+1.2 V). The polymer revealed 34% optical contrast at 460 nm and an excellent optical contrast of 99% in the NIR region.     

Light-regulated supramolecular engineering of polymeric nanocapsules

This article describes the light-driven supramolecular engineering of water-dispersible nanocapsules (NCPs). The novelty of the method lies in the utilization of an appropriate phototrigger to stimulate spherical polymer brushes, consisting of dual-responsive 2-(dimethylamino)ethyl methacrylate (DMAEMA) and light-sensitive spiropyran (SP) moieties, for the development or disruption of the NCPs in a controlled manner. The fabrication of the nanocarriers is based on the formation of H-type π-π interactions between merocyanine (MC) isomers within the sterically crowded environment of the polymer brushes upon UV irradiation, which enables the SP-to-MC isomerization of the photosensitive species. After HF etching of the inorganic core, dual-responsive polymeric vesicles whose walls' robustness is provided by the MC-MC cross-link points are formed. Disruption of the vesicles can be achieved remotely by applying a harmless trigger such as visible-light irradiation. The hydrophilic nature of the DMAEMA comonomer facilitates the engineering of the vesicles in environmentally benign aqueous media and enables the controlled alteration of the NCPs size upon variation of the solution pH. The inherent ability of the NCPs to fluoresce in water opens new possibilities for the development of addressable nanoscale capsules for biomedical applications.     

Electrocatalytic oxidation of some biologically important compounds at conducting polymer electrodes modified by metal complexes

Conducting poly(3-methylthiophene) electrodes were electrochemically prepared. The resulting polymer films were modified with an inorganic complex, ferrocene. The incorporation of the ferrocene/ferrocenium moiety into the polymer film resulted in enhanced charge transfer towards the oxidation of some organic molecules of biological interest. The electrochemical response of the complex-containing polymer electrode was compared to that of the unmodified polymer electrode and that of the substrate. Apparent diffusion coefficients of the redox species were estimated from the cyclic voltammetric data for different biological molecules at the ferrocene-containing polymer electrode. Infra-red spectroscopic measurements for the “as-grown” films revealed the presence of the inorganic complex within the polymer. The modified polymer electrode showed noticeable enhancement for the charge transfer across the film interface and can be used as an electrochemical sensor for biological compounds. Received: 3 June 1997 / Accepted: 7 July 1997     

Thermal hysteresis in the photoresponsivity of a langmuir film of amphiphilic spiropyran

We have found a thermal hysteresis in the photoresponsivity of a Langmuir film for the first time. The Langmuir film of an amphiphilic spiropyran, 1',3'-dihydro-3',3'-dimethyl-6-nitro-1'-octadecyl-8-(docosanoyloxymethyl)spiro[2H-1-benzopyran-2,2'-(2H)-indole] (SP) was fabricated at 13 degrees C at 10 mN m-1, followed by heating to a given temperature. UV irradiation of this film caused only the isomerization of SP to the corresponding merocyanine (MC) up to 29 degrees C. Light-induced J-aggregation of MC occurred at 30 degrees C. On the other hand, once the film was heated to 30 degrees C, light-induced J-aggregation was observed down to 27 degrees C. The hysteresis should be related with the phase transitions that occur in the bulk of SP at similar temperatures. No significant morphological change occurred by light-induced J-aggregation in the Langmuir-Blodgett (LB) film of SP by the present method, in contrast to the case of the LB films fabricated under isothermal conditions at 30 degrees C. This feature enabled us to pattern the LB film with J-aggregate of MC by UV irradiation through a photomask of lines with a width of 5 mum each.     

Photochromism and electrochemistry of a dithienylcyclopentene electroactive polymer

A bifunctional substituted dithienylcyclopentene photochromic switch bearing electropolymerisable methoxystyryl units, which enable immobilization of the photochromic unit on conducting substrates, is reported. The spectroscopic, electrochemical, and photochemical properties of a monomer in solution are compared with those of the polymer formed through oxidative electropolymerization. The electroactive polymer films prepared on gold, platinum, glassy carbon, and indium titanium oxide (ITO) electrodes were characterized by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). The thickness of the films formed is found to be limited to several monolayer equivalents. The photochromic properties and stability of the polymer films have been investigated by UV/vis spectroscopy, electrochemistry, and XPS. Although the films are electrochemically and photochemically stable, their mechanical stability with respect to adhesion to the electrode was found to be sensitive to both the solvent and the electrode material employed, with more apolar solvents, glassy carbon, and ITO electrodes providing good adhesion of the polymer film. The polymer film is formed consistently as a thin film and can be switched both optically and electrochemically between the open and closed state of the photochromic dithienylethene moiety.     

Electrochemical oxidation of 2,5-di-(-2-thienyl)-pyrrole in acetonitrile: cathodic stripping of the electrogenerated conducting polymer

The electrochemical behaviour of 2,5-di-(-2-thienyl)-pyrrole was studied by cyclic voltammetry, chronoamperometry and chronopotentiometry. The monomer oxidation—polymerization takes place on platinum at potentials more positive than 0.3 V vs SCE. At higher potentials, the oxidation processes in the polymer layer seem to control the generation of the polymer and the polymer properties. Polymer films electrogenerated at potentials lower than 0.7 V are insoluble in LiClO₄ + acetonitrile solutions. When the polymer film is reduced electrochemically, it becomes soluble. The solubility is a faradaic process: the weight of electrochemically solubilized polymer is proportional to the cathodic electrical charge consumed. The linearity of the process was proved using different cathodic current densities. The polymer oxidation at potentials more positive than 1 V promotes the insolubility of the polymer, probably by a crosslinking process. The reduction of the polymer at potentials below 0.2 V promotes stripping of the polymer from the electrode. The polymer structure was studied by Fourier transform IR reflectance. The UV—Vis study of the oxidized and reduced polymer in solution led to the band structure and showed the self-reduction of the dissolved polymer.     

Spectral and luminescent properties of hydroxyazomethines of indoline spiropyrans

Spectral and luminescent properties of novel bifunctional compounds 1–3 based on indole spiropyrans and hydroxyazomethines have been studied in comparison with the properties of the model compounds 5’-substituted spiropyrans and azomethines in organic solvents and PMMA films at 293 and 77 K. Luminescence of compounds 1–3 is due to the presence of the azomethine fragment conjugated with the indoline ring of the spiropyran moiety and determining the long-wavelength absorption band of 1–3. Depending on the solvent, temperature, and the substituent, various combinations of the structures of the chromophore fragments are observed in 1–3: the imine or amine form of the azomethine fragment and the spirocyclic or merocyanine form of the spiropyran fragment.     

Photo‐switchable spiropyran immobilized polystyrene beads using catechol chemistry

Catechol and spiropyran functional groups were conjugated to a polymer backbone, allowing immobilization on polystyrene beads (PS beads). The final product was capable of stably reproducing the optical properties of spiropyran. Through the outstanding surface adhesion properties of the catechol functional group, spiropyran was immobilized on PS beads. Switchable photoluminescence in the spiropyran coated PS bead surfaces was observed depending on irradiation with either UV or visible light. The surfaces of the PS beads were morphologically examined by field emission scanning electron microscopy and X‐ray photoelectron spectroscopy was used for characterization of the constituent atoms. Furthermore, UV–Vis and fluorescence spectroscopy were used to confirm conversion between the spiropyran (SP) and merocyanine (MC) forms through UV or visible light irradiation on SP, while fluorescent images for both SP and MC were studied using confocal laser scanning microscopy. The confocal images of the SP‐PS beads system onto MDAMB‐231 cells under UV and visible light indicate the cellular uptake by emerging color within the cytoplasm. Advancing study, the remaining catechol groups can confers adhesive properties, given by contact angle data of various coated surfaces film. These stimuli‐responsive coatings are compatible as drawing switchable photochromic material on versatile substrate shown in confocal images of propylene film. Overall, this great water solubility and biocompatibility PS beads system also showed potential as cell bio‐imaging light stimuli responsive material, and the benefits of this system can also possibly address coat able advanced material for a wide range of surface light sensor applications. Copyright © 2017 John Wiley & Sons, Ltd.     

Control of photoreaction of amphiphilic spiropyran/n-alkane Langmuir and Langmuir-Blodgett films using the phase transition of n-alkane

The structures and photoreactions of Langmuir and Langmuir-Blodgett (LB) films of an amphiphilic spiropyran, 1',3'-dihydro-3',3'-dimethyl-6-nitro-1'-octadecyl-8-(docosanoyloxymethyl)spiro[2H-1-benzopyran-2,2'-(2H)-indole] (SP), mixed with n-alkane are investigated. The mixing ratio was fixed at 1/2 for SP/n-alkane. The surface pressure-area isotherms of SP/octadecane are categorized into two regimes: a low-temperature regime where octadecane is packed with the alkyl chains of SP, and a high-temperature regime where the addition of octadecane does not influence the isotherms significantly. The temperature dividing the two regimes is related with the melting point of the n-alkane mixed with SP in the bulk. UV irradiation of the Langmuir film in the high-temperature regime gives rise to light-induced J-aggregation, whereas that in the low-temperature regime causes only the isomerization of SP to the corresponding merocyanine, indicating that J-aggregation is hindered by the presence of n-alkane in the low-temperature regime. IR external reflection spectroscopy of the Langmuir films shows that n-alkane is released from the film during J-aggregation. The structural changes of the mixed Langmuir and LB films during J-aggregation are almost the same with those of the films of pure SP.     

Photoswitchable Hydrogel Surface Topographies by Polymerisation‐Induced Diffusion

Herein, we describe the preparation of patterned photoresponsive hydrogels by using a facile method. This polymer‐network hydrogel coating consists of N‐isopropylacrylamide (NIPAAM), cross‐linking agent tripropylene glycol diacrylate (TPGDA), and a new photochromic spiropyran monoacrylate. In a pre‐study, a linear NIPAAM copolymer (without TPGDA) that contained the spiropyran dye was synthesised, which showed relatively fast photoswitching behaviour. Subsequently, the photopolymerisation of a similar monomer mixture that included TPGDA afforded freestanding hydrogel polymer networks. The light‐induced isomerisation of protonated merocyanine into neutral spiropyran under slightly acidic conditions resulted in macroscopic changes in the hydrophilicity of the entire polymer film, that is, shrinkage of the hydrogel. The degree of shrinkage could be controlled by changing the chemical composition of the acrylate mixture. After these pre‐studies, a hydrogel film with spatially modulated cross‐link density was fabricated through polymerisation‐induced diffusion, by using a patterned photomask. The resulting smooth patterned hydrogel coating swelled in slightly acidic media and the swelling was higher in the regions with lower cross‐linking densities, thus yielding a corrugated surface. Upon exposure to visible light, the surface topography flattened again, thus showing that a hydrogel coating could be created, the topography of which could be controlled by light irradiation.     

The influence of polymer morphology on polymer film electrochemistry

The electrochemical behavior of functionalized polystyrene-coated electrodes shows a marked dependence on the nature of the electrolyte ions. Scanning electron microscope and surface profile measurements are presented which show that changes in polymer film volume and morphology accompany electrochemical oxidation. Changing polymer morphology by doping the films with soluble monomers during preparation is shown to produce large changes in electrochemical response. Diffusion coefficients were determined for a neutral organic dye dopant in each of the polymer films investigated, and these correlate very well with the oxidation overpotentials observed electrochemically. The nature of polymer film/solvent interactions and the mechanism by which counter ions penetrate the polymer phase is discussed and is related to other physical properties of amorphous polymers in terms of free volume concepts.