Ionophoric properties of atropine: complexation and transport of Na+, K+, Mg2+ and Ca2+ ions across a liquid membrane

The activity of atropine on the complexation and transport of Na(+), K(+), Mg(2+) and Ca(2+) ions across a liquid membrane was investigated using a spectrophotometric method. Atropine is a natural drug that blocks muscarinic receptors. It is a competitive antagonist of the action of acetylcholine and other muscarinic agonists. Atropine is shown to extract Na(+), K(+), Mg(2+) and Ca(2+) ions from an aqueous phase into an organic one with a preference for Ca(2+) ions. According to a kinetic study, divalent cations (Mg(2+) and Ca(2+)) are more rapidly transported than monovalent ones (Na(+) and K(+)). In both complexation and transport, the flux of the ions increases with the increase of atropine concentration. Atropine might act on the membrane permeability; its complexation and ionophoric properties shed new lights on its therapeutic properties.     

Influence of pectins on preparation characteristics of lactoferrin bioadhesive tablets

For the treatment of chronic inflammation in the oral cavity, we attempted to develop bioadhesive tablets of bovine lactoferrin (B-LF). Pectin was used as a bioadhesive polymer, and the influence of the degree of esterification and the molecular weight of pectins on the characteristics of B-LF tablets were investigated. Concerning bioadhesive force, a tendency increasing the value according to increase of the esterification of the pectin was confirmed. Sustained release of B-LF from the tablets was observed as the esterification increased, and a possibility for prediction of the time required to release 50% of B-LF by using the equation given by the degree of esterification and the logarithm of the molecular weight was suggested. Pectin cross-linked with Ca(2+) (Ca-PC) was also used for the preparation of the B-LF tablets. Prolonged release of B-LF from the tablets was observed as the Ca(2+) in Ca-PC increased. Our findings suggest that pectin with a high degree of esterification is suitable as a bioadhesive polymer since high bioadhesive force and sustained release are shown. Furthermore, a possibility that the B-LF release could be controlled by adjusting the Ca(2+) concentration in Ca-PC was suggested.     

Controlled on-chip stimulation of quantal catecholamine release from chromaffin cells using photolysis of caged Ca2+ on transparent indium-tin-oxide microchip electrodes

Photorelease of caged Ca(2+) is a uniquely powerful tool to study the dynamics of Ca(2+)-triggered exocytosis from individual cells. Using photolithography and other microfabrication techniques, we have developed transparent microchip devices to enable photorelease of caged Ca(2+), together with electrochemical detection of quantal catecholamine secretion from individual cells or cell arrays as a step towards developing high-throughput experimental devices. A 100 nm thick transparent indium-tin-oxide (ITO) film was sputter-deposited onto glass coverslips, which were then patterned into 24 cell-sized working electrodes (approximately 20 microm by 20 microm). We loaded bovine chromaffin cells with acetoxymethyl (AM) ester derivatives of the Ca(2+) cage NP-EGTA and Ca(2+) indicator dye fura-4F, then transferred these cells onto the working ITO electrodes for amperometric recordings. Upon flash photorelease of caged Ca(2+), a uniform rise of [Ca(2+)](i) within the target cell leads to quantal release of oxidizable catecholamines measured amperometrically by the underlying ITO electrode. We observed a burst of amperometric spikes upon rapid elevation of [Ca(2+)](i) and a "priming" effect of sub-stimulatory [Ca(2+)](i) on the response of cells to subsequent [Ca(2+)](i) elevation, similar to previous reports using different techniques. We conclude that UV photolysis of caged Ca(2+) is a suitable stimulation technique for higher-throughput studies of Ca(2+)-dependent exocytosis on transparent electrochemical microelectrode arrays.     

Ca(9)Lu(PO(4))(7):Eu(2+),Mn(2+): a potential single-phased white-light-emitting phosphor suitable for white-light-emitting diodes

A novel white-light-emitting phosphor Ca(9)Lu(PO(4))(7):Eu(2+),Mn(2+) has been prepared by solid-state reaction. The photoluminescence properties indicate that there is an efficient energy transfer from the Eu(2+) to Mn(2+) ions via a dipole-quadrupole reaction. The obtained phosphor exhibits a strong excitation band between 250 and 430 nm, matching well with the dominant emission band of a UV light-emitting-diode (LED) chip. Upon excitation of UV light, white light is realized by combining a broad blue-green emission band at 480 nm and a red emission band at 645 nm attributed to the Eu(2+) and Mn(2+) ions. The energy-transfer efficiency and critical distance were also calculated. Furthermore, the phosphors can generate lights from blue-green through white and eventually to red by properly tuning the relative ratio of the Eu(2+) to Mn(2+) ions through the principle of energy transfer. Preliminary studies showed that the phosphor might be promising as a single-phased white-light-emitting phosphor for a UV white-light LED.     

Selective calcium ion sensing with a bichromophoric squaraine foldamer

Several squaraine tethered bichromophoric podand systems 1a-d and a monochromophoric analogue 2 were prepared and characterized. Among these, the bichromophore, 1b, containing five oxygen atoms in the flexible podand moiety was found to specifically bind Ca(2+) in the presence of other metal ions such as K(+), Na(+), and Mg(2+). The selective binding of Ca(2+) is clear from the absorption and emission spectral changes as well as by the visual color change of 1b from light-blue to an intense purple-blue. Benesi-Hildebrand and Job plots confirmed a 1:1 binding between 1b and Ca(2+). Signaling of the binding event is achieved by the cation-induced folding of the bichromophore and the resultant exciton coupling between the squaraine chromophores. The monochromophoric squaraine dye 2 failed to give optical signals upon Ca(2+) binding, due to the absence of exciton interaction in the bound complex. Titration of the folded complex 9 with EDTA released the metal ion from the complex, thereby regaining the original absorption and emission properties of the bichromophore. The squaraine foldamer 1b reported here is the first example of a selective chromogenic Ca(2+) sensor, which works on the principle of exciton interaction in the folded Ca(2+) complex of a bichromophore, the optical properties of which are similar to those of the "H"-type aggregates of analogous squaraine dyes.     

Binding of Ca2+, Mg2+, and heparin by human serum amyloid P component in affinity capillary electrophoresis

Human serum amyloid P component (SAP) is a glycoprotein circulating in the blood and found in association with all types of amyloid (malfolded potein aggregates) examined so far. Despite uncertainties regarding the precise function of SAP in vivo, the lectin-like properties of this Ca(2+)-activated protein with affinity for anionic saccharides and malfolded proteins are well known. The propensity to form homomeric penta- or decamers in solution and the selfaggregation in the presence of Ca(2+) as well as the tendency of SAP to attach to uncoated fused silica have precluded the analysis of SAP by microelectrophoretic methods. We now work out conditions to characterize the binding of Ca(2+) and Mg(2+) and the binding of heparin to SAP in the presence of divalent metal ions by ACE. The results show a strong binding of heparin (sub-muM apparent dissociation constants) even in the abscence of Ca(2+) at low ionic strength, pH 8.2. Also, a selective interaction with Ca(2+) compared with Mg(2+) is demonstrated. The approach will further the use of microelectrophoretic methods to examine the interactions of SAP with ligands of putative pathophysiological relevance such as lipopolysaccharides and misfolded proteins.     

Bis(isoquinoline N-oxide) pincers as a new type of metal cation dual channel fluorosensor

[structure: see text] A new type of donor-spacer-acceptor podand system has been synthesized and proved as an efficient dual channel fluorosensor for Li+, Mg2+, and Ca2+. The known ability for the N-oxide function to bind Lewis acids is the key step in the appearance of a new emitting charge-transfer (CT) excited state. The occurrence of this CT state for alkaline earth (Mg2+ and Ca2+) and not for alkaline metals (Li+) provided a new type of dual channel fluorosensors.     

Spatiotemporal laser inactivation of inositol 1,4,5-trisphosphate receptors using synthetic small-molecule probes

A malachite green-conjugated inositol 1,4,5-trisphosphate (MGIP(3)) induces specific inactivation of IP(3) receptor (IP(3)R) in tissue samples upon laser irradiation. To verify potential usefulness of the method for studies of cellular Ca(2+) signaling, we conducted laser inactivation at the single-cell level and show that IP(3)R was inactivated with extremely high spatiotemporal resolution. In the presence of MGIP(3), the Ca(2+) release function of IP(3)R in single B lymphoma cells decayed exponentially with increasing duration of laser irradiation with a time constant of 3.4 s. Moreover, by confining laser irradiation to a spatially distinct region of differentiated PC12 cells, subcellular inactivation of IP(3)R was attained, as revealed by a loss of local Ca(2+) signal. Such real-time inactivation of IP(3)R only within a subcellular region may provide a powerful method for investigating spatiotemporal dynamics of Ca(2+) signaling.     

Designing sequence to control protein function in an EF-hand protein

The extent of conformational change that calcium binding induces in EF-hand proteins is a key biochemical property specifying Ca(2+) sensor versus signal modulator function. To understand how differences in amino acid sequence lead to differences in the response to Ca(2+) binding, comparative analyses of sequence and structures, combined with model building, were used to develop hypotheses about which amino acid residues control Ca(2+)-induced conformational changes. These results were used to generate a first design of calbindomodulin (CBM-1), a calbindin D(9k) re-engineered with 15 mutations to respond to Ca(2+) binding with a conformational change similar to that of calmodulin. The gene for CBM-1 was synthesized, and the protein was expressed and purified. Remarkably, this protein did not exhibit any non-native-like molten globule properties despite the large number of mutations and the nonconservative nature of some of them. Ca(2+)-induced changes in CD intensity and in the binding of the hydrophobic probe, ANS, implied that CBM-1 does undergo Ca(2+) sensorlike conformational changes. The X-ray crystal structure of Ca(2+)-CBM-1 determined at 1.44 A resolution reveals the anticipated increase in hydrophobic surface area relative to the wild-type protein. A nascent calmodulin-like hydrophobic docking surface was also found, though it is occluded by the inter-EF-hand loop. The results from this first calbindomodulin design are discussed in terms of progress toward understanding the relationships between amino acid sequence, protein structure, and protein function for EF-hand CaBPs, as well as the additional mutations for the next CBM design.     

Interfacial ternary complex DNA/Ca/lipids at anionic vesicle surfaces

The electroporative transfer of gene DNA and other bioactive substances into tissue cells by electric pulses gains increasing importance in the new disciplines of electrochemotherapy and electrogenetherapy. The efficiency of the electrotransfer depends crucially on the adsorption of the gene DNA and oligonucleotides to the plasma cell membranes. Here it is shown that the adsorption of larger oligonucleotides such as fragments (ca. 300 bp) of sonicated calf-thymus DNA, to anionic lipids of unilamellar vesicles (diameter Phi=300+/-90 nm) is greatly enhanced by divalent cations such as Ca(2+)-ions. Applying centrifugation, bound and free DNA are monitored optically at the wavelength lambda=260 nm. Using arsenazo III as a Ca(2+)-indicator and atomic absorption spectroscopy (AAS), Ca(2+)-titrations of DNA and vesicles yield the individual equilibrium constants of Ca(2+)- and DNA-binding not only for the binary complexes: Ca/lipids, Ca/DNA and DNA/lipids, respectively, but also for the various processes to form the ternary complex DNA/Ca/lipids. The data provide the basis for goal-directed optimization protocols for the adsorption and thus efficient electrotransfer of oligonucleotides and polynucleotides into cells.     

Synthesis and photoluminescence properties of Ce3+ and Eu2+-activated Ca7Mg(SiO4)4 phosphors for solid state lighting

Ce(3+) and Eu(2+) singly doped and Ce(3+)/Eu(2+)-codoped Ca(7)Mg(SiO(4))(4) phosphors are synthesized by the conventional solid state reaction. The Ce(3+) activated sample exhibits intense blue emission under 350 nm excitation, the composition-optimized Ca(7)Mg(SiO(4))(4)?:?4%Ce(3+) shows better color purity than the commercial blue phosphor, BaMgAl(10)O(17)?:?Eu(2+) (BAM?:?Eu(2+)) and exhibits superior external quantum efficiency (65%). The Ca(7)Mg(SiO(4))(4)?:?Eu(2+) powder shows a broad emission band in the wavelength range of 400-600 nm with a maximum at about 500 nm. The strong excitation bands of the Ca(7)Mg(SiO(4))(4)?:?Eu(2+) in the wavelength range of 250-450 nm are favorable properties for applications as light-emitting-diode conversion phosphors. Furthermore, the energy transfer from the Ce(3+) to Eu(2+) ions is observed in the codoped samples, the resonance-type energy transfer is determined to be due to the dipole-dipole interaction mechanism and the critical distance is obtained through the spectral overlap approach and concentration quenching method.     

The characterization for the binding of calcium and terbium to Euplotes octocarinatus centrin

Centrin is a member of the EF-hand superfamily that plays critical role in the centrosome duplication and separation. In the present paper, we characterized properties of metal ions binding to Euplotes octocarinatus centrin (EoCen) by fluorescence spectra and circular dichroism (CD) spectra. Changes of fluorescence spectra and alpha-helix contents of EoCen proved that Tb(3+) and Ca(2+) induced great conformational changes of EoCen resulting in exposing hydrophobic surfaces. At pH 7.4, Ca(2+) (and Tb(3+)) bond with EoCen at the ratio of 4:1. Equilibrium experiment indicated that Ca(2+) and Tb(3+) exhibited different binding capabilities for C- and N-terminal domains of protein. C-terminal domain bond with Ca(2+) or Tb(3+) approximately 100-fold more strongly than N-terminal. Aromatic residue-sensitized Tb(3+) energy transfer suggested that site IV bond to Tb(3+) or Ca(2+) more strongly than site III. Based on fluorescence titration curves, we reckoned the conditional binding constants of EoCen site IV quantitatively to be K(IV)=(1.23+/-0.51)x10(8)M(-1) and K(IV)=(6.82+/-0.33)x10(5)M(-1) with Tb(3+) and Ca(2+), respectively. Metal ions bond to EoCen in the order of IV>III>II, I.     

Vanadate-stimulated release of hepatic lipase activity from liver.

Vanadate stimulated the release of rat hepatic lipase activity from liver slices into an incubation medium in a time- and dose-dependent manner. Insulin, however, failed to have this stimulatory action, and the release by heparin was recognized, but was not additive to that by vanadate. Amiloride, an inhibitor of tyrosine kinase in some receptors and of the Na+/H+ exchange system suppressed the vanadate-stimulated release. Biochanin A, a different type of tyrosine kinase inhibitor than amiloride, also suppressed the effect of vanadate. The stimulation by vanadate was clearly preserved in Na(+)-, K(+)-, or Ca(2+)-free medium, suggesting that neither the Na+/H+ exchange system, Na+, K(+)-adenosine triphosphatase, nor Ca(2+)-influx into cells is involved in the action of this substance. These results suggest that vanadate-stimulated release of the enzyme activity is associated with the activation of the tyrosine kinase activity.     

Sequence diversity, metal specificity, and catalytic proficiency of metal-dependent phosphorylating DNA enzymes

Although DNA has not been found responsible for biological catalysis, many artificial DNA enzymes have been created by "in vitro selection." Here we describe a new selection approach to assess the influence of four common divalent metal ions (Ca(2+), Cu(2+), Mg(2+), and Mn(2+)) on sequence diversity, metal specificity, and catalytic proficiency of self-phosphorylating deoxyribozymes. Numerous autocatalytic DNA sequences were isolated, a majority of which were selected using Cu(2+) or Mn(2+) as the divalent metal cofactor. We found that Cu(2+)- and Mn(2+)-derived deoxyribozymes were strictly metal specific, while those selected by Ca(2+) and Mg(2+) were less specific. Further optimization by in vitro evolution resulted in a Mn(2+)-dependent deoxyribozyme with a k(cat) of 2.8 min(-1). Our findings suggest that DNA has sufficient structural diversity to facilitate efficient catalysis using a broad scope of metal cofactor utilizing mechanisms.     

Structure Refinement and Two-Center Luminescence of Ca(3)La(3)(BO(3))(5):Ce(3+) under VUV-UV Excitation

A series of Ca(3)La(3(1-x))Ce(3x)(BO(3))(5) phosphors were prepared by a high-temperature solid-state reaction technique. Rietveld refinement was performed using the powder X-ray diffraction (XRD) data, which shows occupation of Ce(3+) on both Ca(2+) and La(3+) sites with a preferred location on the La(3+) site over the Ca(2+) site. The prepared samples contain minor second phase LaBO(3) with contents of ～0.64-3.27 wt % from the Rietveld analysis. LaBO(3):1%Ce(3+) was prepared as a single phase material and its excitation and emission bands were determined for identifying the influence of impurity LaBO(3):Ce(3+) luminescence on the spectra of the Ca(3)La(3(1-x))Ce(3x)(BO(3))(5) samples. The luminescence properties of Ca(3)La(3(1-x))Ce(3x)(BO(3))(5) samples under vacuum ultraviolet (VUV) and UV excitation were investigated, which exhibited two-center luminescence of Ce(3+), assigned to the Ce(1)(3+) center in the La(3+) site and Ce(2)(3+) center in the Ca(2+) site, taking into account the spectroscopic properties and the Rietveld refinement results. The influences of the doping concentration and the excitation wavelength on the luminescence of Ce(3+) in Ca(3)La(3(1-x))Ce(3x)(BO(3))(5) are discussed together with the decay characteristics.     

Luminescence and microstructures of Eu(3+)-doped Ca9LiGd(2/3)(PO4)7

A red-emitting phosphor, Eu(3+)-doped Ca(9)LiGd(2/3)(PO(4))(7), was synthesized by the conventional high-temperature solid-state reaction. X-ray powder diffraction (XRD) analyses confirmed the pure crystalline phase of Whitlockite-type structure. The excitation spectra of Eu(3+) doped Ca(9)LiGd(2/3)(PO(4))(7) were measured in the VUV and UV region indicating an efficient energy transfer process from the host and Gd(3+) to Eu(3+) ions. Upon excitation with VUV and UV radiation, the phosphor showed strong red emission around 611 nm corresponding to the forced electric dipole (5)D(0)→(7)F(2) transition of Eu(3+) ions. The VUV- and UV-excited luminescence spectra of Ca(9)LiGd(2/3)(PO(4))(7):Eu(3+) together with the dependence of the integrated emission intensities on the doping levels were investigated. The Eu(3+) ions were investigated by a tunable laser as an excitation source. The excitation spectra of (7)F(0)→(5)D(0) transitions suggest that there are two families of inequivalent sites for Eu(3+) in this host. The concentration quenching and crystallographic site-occupancy of Eu(3+) ions in Ca(9)LiGd(2/3)(PO(4))(7) host were discussed on the basis of the site selective excitation and emission spectra, the luminescence decay and its crystal structure.     

Sorption interaction of phenanthrene with soil and sediment of different particle sizes and in various CaCl2 solutions

The objective of this investigation is to evaluate the influences of natural sorbent particle size and system Ca(2+) concentration on sorption of low-polarity organic chemicals. The physicochemical properties of the different particle size soil and sediment subsamples and the surface characters of the soil and sediment samples in various CaCl(2) concentrations were determined. The sorption behavior of phenanthrene (PHN) on the subsamples of different particle size and to the samples in various CaCl(2) solutions was examined. Batch experiments demonstrate that the sorption capacities increase with decreased particle size for both soil and sediment. It is presumably due to the higher total organic carbon (TOC) content for the finer particles. But the enhancements in sorption coefficients are not met with the equal increases in TOC contents. The effect of Ca(2+) on PHN uptake is strong in short contact time but slight in long contact time. With increasing Ca(2+) concentration, the sorption capacities for Beizhai soil increase first in the low Ca(2+) concentration range, and then decline. Nevertheless, the increase of Ca(2+) concentration greatly reduces the uptake of phenanthrene on Guanting sediment over the overall measured range. The different physicochemical properties, such as dissolved organic carbon (DOC) content, mineral and element composition, and surface characters, between soil and sediment may result in this discrepancy.     

Copper release kinetics from a long-term contaminated acid soil using a stirred flow chamber: effect of ionic strength and pH

The effect of pH and ionic strength on copper release in a long-term Cu-polluted soil was studied using a stirred flow chamber. The presence of Ca(2+) and Na(+) was also evaluated. More copper was released as the ionic strength increased, and it was significantly higher in the presence of Ca(2+) than in the presence of Na(+). The maximum amount of Cu that could be released under experimental conditions increased logarithmically as the ionic strength increased, and the release rate parameters were not significantly correlated with ionic strength values. The maximum amount of Cu that could be released was similar for solutions with pH values between 5.5 and 8.5. For solutions with a pH value below 4.5, the amount of Cu released increased exponentially as the pH decreased. The release rate parameters and Cu release pattern were affected by pH, especially for more acidic solutions (pH values of 2.5 and 3.5).     

Properties of (Mg2 + Ca2+)-ATPase of erythrocyte membranes prepared by different procedures: influence of Mg2+, Ca2+, ATP, and protein activator.

Erythrocyte membranes prepared by three different procedures showed (Mg2+ + Ca2+)-ATPase activities differing in specific activity and in affinity for Ca2+. The (Mg2+ + Ca2+)-ATPase activity of the three preparations was stimulated to different extents by a Ca2+-dependent protein activator isolated from hemolysates. The Ca2+ affinity of the two most active preparations was decreased as the ATP concentration in the assay medium was increased. Lowering the ATP concentration from 2 mM to 2-200 microM or lowering the Mg:ATP ratio to less than one shifted the (Mg2+ + Ca2+)-ATPase activity in stepwise hemolysis membranes from mixed "high" and "low" affinity to a single high Ca2+ affinity. Membranes from which soluble proteins were extracted by EDTA (0.1 mM) in low ionic strength, or membranes prepared by the EDTA (1-10 mM) procedure, did not undergo the shift in the Ca2+ affinity with changes in ATP and MgCl2 concentrations. The EDTA-wash membranes were only weakly activated by the protein activator. It is suggested that the differences in properties of the (Mg2+ + Ca2+)-ATPase prepared by these three procedures reflect differences determined in part by the degree of association of the membrane with a soluble protein activator and changes in the state of the enzyme to a less activatable form.     

Molecular-dynamics simulations of alkaline-earth metal cations in water by atom-bond electronegativity equalization method fused into molecular mechanics

Intermolecular potential for alkaline-earth metal (Be(2+), Mg(2+), and Ca(2+)) cations in water has been derived using the atom-bond electronegativity equalization method fused into molecular mechanics (ABEEM/MM), and it is consistent with what was previously applied to the hydration study of the monovalent cations. Parameters for the effective interaction between a cation and a water molecule were determined, reproducing the ab initio results. The static, dynamic, and thermodynamic properties of Be(2+)(aq), Mg(2+)(aq), and Ca(2+)(aq) were studied using these potential parameters. Be(2+) requires a more complicated form of the potential function than Mg(2+) and Ca(2+) in order to obtain better fits. Strong influences of the twofold charged cations on the structures of the hydration shells and some other properties of aqueous ionic solutions are discussed and compared with the results of a previous study of monovalent cations in water. At the same time, comparative study of the hydration properties of each cation is also discussed. This work demonstrates that ABEEM/MM provides a useful tool in the exploration of the hydration of double-charged cations in water.