XPS investigation of ion beam induced conversion of GaAs(0 0 1) surface into GaN overlayer

For the advance of GaN based optoelectronic devices, one of the major barriers has been the high defect density in GaN thin films, due to lattice parameter and thermal expansion incompatibility with conventional substrates. Of late, efforts are focused in fine tuning epitaxial growth and in search for a low temperature method of forming low defect GaN with zincblende structure, by a method compatible to the molecular beam epitaxy process. In principle, to grow zincblende GaN the substrate should have four-fold symmetry and thus zincblende GaN has been prepared on several substrates including Si, 3C-SiC, GaP, MgO, and on GaAs(0 0 1). The iso-structure and a common shared element make the epitaxial growth of GaN on GaAs(0 0 1) feasible and useful. In this study ion-induced conversion of GaAs(0 0 1) surface into GaN at room temperature is optimized. At the outset a Ga-rich surface is formed by Ar⁺ ion bombardment. Nitrogen ion bombardment of the Ga-rich GaAs surface is performed by using 2-4 keV energy and fluence ranging from 3 × 10¹³ ions/cm² to 1 × 10¹⁸ ions/cm². Formation of surface GaN is manifested as chemical shift. In situ core level and true secondary electron emission spectra by X-ray photoelectron spectroscopy are monitored to observe the chemical and electronic property changes. Using XPS line shape analysis by deconvolution into chemical state, we report that 3 keV N₂⁺ ions and 7.2 × 10¹⁷ ions/cm² are the optimal energy and fluence, respectively, for the nitridation of GaAs(0 0 1) surface at room temperature. The measurement of electron emission of the interface shows the dependence of work function to the chemical composition of the interface. Depth profile study by using Ar⁺ ion sputtering, shows that a stoichiometric GaN of 1 nm thickness forms on the surface. This, room temperature and molecular beam epitaxy compatible, method of forming GaN temperature can serve as an excellent template for growing low defect GaN epitaxial overlayers.     

Formation of nanodots on oblique ion sputtered InP surfaces

Using a field emission gun based scanning electron microscopy, we report the formation of nanodots on the InP surfaces after bombardment by 100 keV Ar⁺ ions under off-normal ion incidence (30° and 60° with respect to the surface normal) condition in the fluence range of 1 × 10¹⁶ to 1 × 10¹⁸ ions cm⁻². Nanodots start forming after a threshold fluence of about 1 × 10¹⁷ ions cm⁻². It is also seen that although the average dot diameter increases with fluence the average number of dots decreases with increasing fluence. Formation of such nanostructured features is attributed due to ion-beam sputtering. X-ray photoelectron spectroscopy analysis of the ion sputtered surface clearly shows In enrichment of the sputtered InP surface. The observation of growth of nanodots on the Ar⁺-ion sputtered InP surface under the present experimental condition matches well with the recent simulation results based on an atomistic model of sputter erosion.     

SEM and XPS studies of nanohole arrays on InP(1 0 0) surfaces created by coupling AAO templates and low energy Ar ion sputtering

The aim of the present study is to demonstrate the feasibility to form well-ordered nanoholes on InP(1 0 0) surfaces by low Ar⁺ ion sputtering process in UHV conditions from anodized aluminum oxide (AAO) templates. This process is a promising approach in creating ordered arrays of surface nanostructures with controllable size and morphology. To follow the Ar⁺ ion sputtering effects on the AAO/InP surfaces, X-ray photoelectron spectroscopy (XPS) was used to determine the different surface species. In_4d and P_2p core level spectra were recorded on different InP(1 0 0) surfaces after ions bombardment. XPS results showed the presence of metallic indium on both smooth InP(1 0 0) and AAO/InP(1 0 0) surfaces. Finally, we showed that this experiment led to the formation of metallic In dropplets about 10 nm in diameter on nanoholes patterned InP surface while the as-received InP(1 0 0) surface generated metallic In about 60 nm in diameter.     

Electron energy loss spectra from polycrystalline Cr and Cr2O3 before and after surface reduction by Ar bombardment

Electron energy loss spectra (ELS) have been obtained from polycrystalline Cr and Cr₂O₃ before and after surface reduction by 2 keV Ar⁺ bombardment. The primary electron energy used in the ELS measurements was systematically varied from 100 to 1150 eV in order to distinguish surface versus bulk loss processes. Two predominant loss features in the ELS spectra obtained from Cr metal at 9.0 and 23.0 eV are assigned to the surface and bulk plasmon excitations, respectively, and a number of other features arising from single electron transitions from both the bulk and surface Cr 3d bands to higher-lying states in the conduction band are also present. The ELS spectra obtained from Cr₂O₃ exhibit features that originate from both interband transitions and charge-transfer transitions between the Cr and O ions as well as the bulk plasmon at 24.4 eV. The ELS feature at 4.0 eV arises from a charge-transfer transition between the oxygen and chromium ions in the two surface layers beneath the chemisorbed oxygen layer, and the ELS feature at 9.8 eV arises from a similar transition involving the chemisorbed oxygen atoms. The intensity of the ELS peak at 9.8 eV decreases after Ar⁺ sputtering due to the removal of chemisorbed oxygen atoms. Sputtering also increases the number of Cr²⁺ states on the surface, which in turn increases the intensity of the 4.0 eV feature. Furthermore, the ELS spectra obtained from the sputtered Cr₂O₃ surface exhibit features characteristic of both Cr⁰ and Cr₂O₃, indicating that Ar⁺ sputtering reduces Cr₂O₃. The fact that neither the surface- nor the bulk-plasmon features of Cr⁰ can be observed in the ELS spectra obtained from sputtered Cr₂O₃ while the loss features due to Cr⁰ interband transitions are clearly present indicates that Cr⁰ atoms form small clusters lacking a bulk metallic nature during Ar⁺ bombardment of Cr₂O₃.     

Influence of charged particle bombardment and sputtering parameters on the properties of HfO2 films prepared by dc reactive magnetron sputtering

HfO₂ films prepared on glass substrates by dc reactive magnetron sputtering in an Ar + O₂ atmosphere are investigated. The films are polycrystallized with a pure monoclinic phase, and the crystallization strongly relates to the technology environment. Charged particle bombardment mainly caused by negative oxygen ions during sputtering on the films results in rougher surface morphology and worse crystalline property. Influence of sputtering pressure, substrate temperature and Ar:O₂ flow ratio is studied. The main orientations of the films are (−1 1 1) and (1 1 1). The (−1 1 1) orientation is stable, but (1 1 1) orientation is very sensitive to the sputtering condition, and it can be suppressed effectively by introducing charged particle bombardment, lowing sputtering pressure and increasing oxygen concentration.     

Desorption of chemisorbed Carbon on Mo(1 0 0) by noble gas ion sputtering: Validation of ground test measurements of ion engine lifetimes

We report desorption cross section measurements for one monolayer of chemisorbed carbon on a Mo(1 0 0) surface induced by sputtering with noble gas ions (Ne⁺, Ar⁺, Xe⁺) at different incident angles, ion energies, and substrate temperatures. Desorption cross sections were determined by using low-energy ion scattering (LEIS) to monitor the increase of the signal from the Mo substrate. A monolayer of p(1 × 1) carbon adatoms on the Mo(1 0 0) surface was created by dosing ethylene (C₂H₄) to the substrate at 800 K, and characterized by Auger electron spectroscopy (AES) and low energy electron diffraction (LEED). We find that the carbon desorption cross section increases with increasing mass and energy of the impinging ions, and there is a maximum value for the desorption cross section at an incident angle for the ions of 30° from the surface plane. The desorption cross section also increases up to a substrate temperature of 300 °C. Values for the carbon desorption cross section for carbon adatoms on Mo(1 0 0) by 400-eV Xe⁺ ion sputtering are about 2 × 10⁻¹⁵ cm², which is one order of magnitude higher than those for bulk carbon samples. This information is particularly important for evaluation of ion-engine lifetimes from ground-test measurements in which contaminant carbon is deposited on Mo accelerator grids, potentially altering the sputtering rate of the Mo. Our measurements show that monolayer amounts of carbon on Mo have desorption cross sections that are two orders of magnitude higher than estimates of what would be required to reduce the Mo erosion rate, and thus ground-test measurements can be used with confidence to predict ion-engine wear in space, from this perspective.     

An XPS study on the surface reduction of V2O5(0 0 1) induced by Ar ion bombardment

The effect of the irradiation with Al Kα X-rays during an XPS measurement upon the surface vanadium oxidation state of a fresh in vacuum cleaved V₂O₅(0 0 1) crystal was examined. Afterwards, the surface reduction of the V₂O₅(0 0 1) surface under Ar⁺ bombardment was studied. The degree of reduction of the vanadium oxide was determined by means of a combined analysis of the O1s and V2p photoelectron lines. Asymmetric line shapes were needed to fit the V³⁺2p photolines, due to the metallic character of V₂O₃ at ambient temperature. Under Ar⁺ bombardment, the V₂O₅(0 0 1) crystal surface reduces rather fast towards the V₂O₃ stoichiometry, after which a much slower reduction of the vanadium oxide occurs.     

Study of S ion-assisted sulfurization of n-GaAs (1 0 0) surface

The chemical structure and site location of sulfur atoms on n-GaAs (1 0 0) surface treated by bombardment of S⁺ ions over their energy range from 10 to 100 eV have been studied by X-ray photoelectron spectroscopy and low energy electron diffraction. The formation of Ga-S and As-S species on the S⁺ ion bombarded n-GaAs surface is observed. An apparent donor doping effect is observed for the n-GaAs by the 100 eV S⁺ ion bombardment. It is found that the S⁺ ions with higher energy are more effective in the formation of Ga-S species, which assists the n-GaAs (1 0 0) surface in reconstruction into an ordered (1 × 1) structure upon subsequent annealing. The treatment is further extended to repair Ar⁺ ion damaged n-GaAs (1 0 0) surface. It is found that after a n-GaAs (1 0 0) sample is damaged by 150 eV Ar⁺ ion bombardment, and followed by 50 eV S⁺ ion treatment and subsequent annealing process, finally an (1 × 1) ordering GaAs (1 0 0) surface with low surface states is obtained.     

Ion irradiation induced Al-Ti interaction in nano-scaled Al/Ti multilayers

Interactions induced in Al/Ti multilayers by implantation of Ar ions at room temperature were investgated. Initial structures consisted of (Al/Ti) × 5 multilayers deposited by d.c. ion sputtering on Si(1 0 0) wafers, to a total thickness of ∼250 nm. They were irradiated with 200 keV Ar⁺ ions, to the fluences from 5 × 10¹⁵ to 4 × 10¹⁶ ions/cm². It was found that ion irradiation induced a progressed intermixing of the multilayer constituents and Al-Ti nanoalloying for the highest applied fluence. The resulting nanocrystalline structure had a graded composition with non-reacted or interdiffused Al and Ti, and γ-AlTi and AlTi₃ intermetallic phases. Most intense reactivity was observed around mid depth of the multilayers, where most energy was deposited by the impact ions. It is presumed that Al-Ti chemical reaction is triggered by thermal spikes and further enhanced by chemical driving forces. The applied processing can be interesting for fabrication of tightly bond multilayered structures with gradual changes of their composition and properties.     

Preferential sputtering of TIC under keV Ar+ ion bombardment: Simultaneous sputtering-ISS measurement with He+ and Ar+ ions

The composition change of the outermost atom layer of TiC(110) under ion bombardment with 1.5–3 keV He⁺ and He⁺ + Ar⁺ ions has been measured by ion scattering spectroscopy with He⁺ ions at different sample temperatures. It has been found that the preferential sputtering of C atoms takes place for both the He⁺ and Ar⁺ ion bombardment, however the preferred sputtering is more pronounced for Ar⁺ ions than for He⁺ ions. The ion bombardment with He⁺ ions at elevated sample temperatures hardly results in any change in surface composition below ～800°C, while Ar⁺ ion bombardment results in C enrichment for elevated temperatures as reported so far.     

Ar irradiation of Si nanocrystal-doped SiO2: Evolution of photoluminescence

We report the evolution of photoluminescence (PL) of Si nanocrystals (nc-Si) embedded in a matrix of SiO₂ during Ar⁺ ion bombardment. The integrated intensity of nc-Si PL falls down drastically before the Ar⁺ ion fluence of 10¹⁵ ions cm⁻², and then decreases slowly with the increasing ion fluence. At the meantime, the PL peak position blueshifts steadily before the fluence of 10¹⁵ ions cm⁻², and then changes in an oscillatory manner. Also it is found that the nc-Si PL of the Ar⁺-irradiated sample can be partly recovered after annealing at 800 °C in nitrogen, but can be almost totally recovered after annealing in oxygen. The results confirm that the ion irradiation-induced defects are made up of oxygen vacancies, which absorb light strongly. The oscillatory peak shift of nc-Si can be related to a size-distance distribution of nc-Si in SiO₂.     

High-intensity Si cluster ion emission from a silicon target bombarded with large Ar cluster ions

Secondary ions emitted from Si targets were measured with a quadrupole mass spectrometer under large Ar cluster and monomer ion bombardment. Incident ion beams with energies from 7.5 to 25 keV were used and the mean size of the Ar cluster ion was about 1000 atoms/cluster. Si_n⁺ ions with n values up to n = 8 were detected under Ar cluster ion bombardment, whereas Si cluster ions were scarcely detected under Ar monomer ion bombardment. These cluster ion yields showed the power law dependence on the cluster size.     

Carbon sputtering yield measurements at grazing incidence

In this investigation, carbon sputtering yields were measured experimentally at varying angles of incidence under Xe⁺ bombardment. The measurements were obtained by etching a coated quartz crystal microbalance (QCM) with a low energy ion beam. The material properties of the carbon targets were characterized with a scanning electron microscope (SEM) and Raman spectroscopy. C sputtering yields measured under Ar⁺ and Xe⁺ bombardment at normal incidence displayed satisfactory agreement with previously published data over an energy range of 200 eV-1 keV. For Xe⁺ ions, the dependence of the yields on angle of incidence θ was determined for 0° ≤ θ ≤ 80°. Over this range, an increase in C sputtering yield by a factor of 4.8 was observed, with the peak in yield occurring at 70°. This is a much higher variation compared to Xe⁺ → Mo yields under similar conditions, a difference that may be attributed to higher scattering of the incident particles transverse to the beam direction than in the case of Xe⁺ → C. In addition, the variation of the yields with θ was not strongly energy dependent. Trapping of Xe in the surface was observed, in contrast to observations using the QCM technique with metallic target materials. Finally, target surface roughness was characterized using atomic force microscope measurements to distinguish between the effects of local and overall angle of incidence of the target.     

Formation of alumina-ceria mixed oxide in model systems

Interaction of aluminium with cerium oxide was studied by photoelectron spectroscopy of Al/CeO₂(1 1 1) and CeO₂/Al(1 1 1) model systems. It was found in both cases that metallic aluminium was immediately oxidized, CeO₂ was partially reduced and a mixed oxide with cerium present as Ce³⁺ was formed. The compound is probably cerium aluminate CeAlO₃ mixed with Al₂O₃ or Ce₂O₃. In both cases the intermixing was limited by the diffusion of aluminium into ceria. The excess of deposited material above this limit formed AlO_x and CeO₂ overlayers on the top of the mixed oxide + aluminate/CeO₂ and mixed oxide + aluminate/Al films, respectively.     

Effect of Ar+ irradiation on the electrical conductivity of BaCe0.9Y0.1O3−δ

The effects of 10 keV Ar⁺ ion irradiation on the electrical characteristics of BaCe_0.9Y_0.1O_2.95 subject to fluences of 0, 1.0 × 10¹⁷, 5.0 × 10¹⁷ and 1.0 × 10¹⁸ ions/cm² at room temperature, has been investigated using elastic recoil detection analysis (ERDA), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) and alternating current (AC) impedance measurements. It was confirmed from the ERDA results that the hydrogen concentration near the surface increased with increase of Ar⁺ ion fluence. This increase may be associated with the increasing quantities of hydrogen generated by interaction between oxygen vacancies, formed by irradiation, and H₂O from exposure to air. SEM images showed clearly that the number of surface defects due to modification increased with increasing fluence. In addition, the size of the defects showed a tendency to increase with increasing fluence. From the results of XPS analyses, providing information on the electronic states on the surface, it was evident that with increase in the Ar⁺ ion fluence, the quantity of excess oxygen, such as hydroxide, increased in the oxygen 1s XPS spectrum. In addition, it was indirectly found, from decomposition of the Ce 3d, spectrum that the concentration of oxygen vacancies increased with fluence, since the percentage of Ce³⁺ also increased. Accordingly, the surface modification led to the formation of more oxygen vacancies and a greater hydrogen concentration on the surface, since the H₂O interacted with some of them. From the results of the DC conductivity and AC impedance measurements, the proton conductivity was shown to predominate over the temperature range from 473 K to 823 K. It was concluded that the increase in these protons and vacancies generated from surface modification contributed to the increase of proton conductivity.     

Damage formation in Ge during Ar and He implantation at 15 K

Ar⁺ and He⁺ ions were implanted into Ge samples with (1 0 0), (1 1 0), (1 1 1) and (1 1 2) orientations at 15 K with fluences ranging from 1×10¹¹ to 1×10¹⁴ cm⁻² for the Ar⁺ ions and fluences ranging from 1×10¹² to 6×10¹⁵ cm⁻² for the He⁺ ions. The Rutherford backscattering (RBS) technique in the channelling orientation was used to study the damage built-up in situ. Implantation and RBS measurements were performed without changing the target temperature. The samples were mounted on a four axis goniometer cooled by a close cycle He cryostat. The implantations were performed with the surface being tilt 7° off the ion beam direction to prevent channelling effects. After each 300 keV Ar⁺ and 40 keV He⁺ implantation, RBS analysis was performed with 1.4 MeV He⁺ ions.For both the implantation ions, there is about no difference between the values found for the damage efficiency per ion for the four different orientations. This together with the high value (around 5 times higher than that found in Si), gives rise to the assumption of amorphous pocket formation per incident ion, i.e. direct impact amorphization, already at low implantation fluences. At higher fluences, when collision cascades overlap, there is a growth of the already amorphized regions.     

X-ray photoelectron spectroscopic studies of PbO surfaces bombarded with He+, Ne+, Ar+, Xe+ and Kr+

The surface composition of PbO has been studied with X-ray photoelectron spectroscopy after bombardment with several inert gas ions of 400 eV. The results show reduction of PbO to metallic Pb with the degree of damage following the order He⁺ > Ne⁺ >Ar⁺. Both Kr⁺ and Xe⁺ did not reduce the oxide. The depth of damage varied from ≈9 Å for He⁺ to ≈1 Å for Ar⁺ bombardment. The results were compared to a collisional and a thermal model of the sputtering process.     

ISS measurement of surface composition of AuCu alloys by simultaneous ion bombardments with Ar+ and He + ions

Surface composition of Au-Cu(43 at%) alloy under 1.5–5 keV argon ion bombardment has been investigated by ion scattering spectroscopy (ISS). In this experiment, we adopted a specific technique to use mixed He⁺ and Ar⁺ ions as primary beam in order to perform sputtering (Ar⁺) and ISS measurement (He⁺) simultaneously. The outermost atom layer of Au-Cu alloys under Ar⁺ ion bombardment is Au-rich leading to the conclusion that Ar⁺ ion bombardment of AuCu alloys causes the preferential sputtering of Cu atoms, resulting in a Au-rich outermost atom layer and a depletion layer of Au atoms beneath the outermost atom layer due to ion-beam-enhanced surface segregation. This result explains the experimental results obtained by AES as well.     

Reaction of water with Ce-Au(1 1 1) and CeOx/Au(1 1 1) surfaces: Photoemission and STM studies

This article reports photoemission and STM studies for the adsorption and dissociation of water on Ce-Au(1 1 1) alloys and CeO_x/Au(1 1 1) surfaces. In general, the adsorption of water at 300 K on disordered Ce-Au(1 1 1) alloys led to O-H bond breaking and the formation of Ce(OH)_x species. Heating to 500-600 K induced the decomposition or disproportionation of the adsorbed OH groups, with the evolution of H₂ and H₂O into gas phase and the formation of Ce₂O₃ islands on the gold substrate. The intrinsic Ce ↔ H₂O interactions were explored by depositing Ce atoms on water multilayers supported on Au(1 1 1). After adsorbing Ce on ice layers at 100 K, the admetal was oxidized immediately to yield Ce³⁺. Heating to room temperature produced finger-like islands of Ce(OH)_x on the gold substrate. The hydroxyl groups dissociated upon additional heating to 500-600 K, leaving Ce₂O₃ particles over the surface. On these systems, water was not able to fully oxidize Ce into CeO₂ under UHV conditions. A complete Ce₂O₃ → CeO₂ transformation was seen upon reaction with O₂. The particles of CeO₂ dispersed on Au(1 1 1) did not interact with water at 300 K or higher temperatures. In this respect, they exhibited the same reactivity as does a periodic CeO₂(1 1 1) surface. On the other hand, the Ce₂O₃/Au(1 1 1) and CeO_2−x/Au(1 1 1) surfaces readily dissociated H₂O at 300-500 K. These systems showed an interesting reactivity for H₂O decomposition. Water decomposed into OH groups on Ce₂O₃/Au(1 1 1) or CeO_2−x/Au(1 1 1) without completely oxidizing Ce³⁺ into Ce⁴⁺. Annealing over 500 K removed the hydroxyl groups leaving behind CeO_2−x/Au(1 1 1) surfaces. In other words, the activity of CeO_x/Au(1 1 1) for water dissociation can be easily recovered. The behavior of gold-ceria catalysts during the water-gas shift reaction is discussed in light of these results.     

Ultraviolet photoelectron spectroscopy of nano In clusters Schottky barriers on sputtered InP

Plasmon peaks along with Auger P_LVV peak have been observed in the ultraviolet photoelectron spectra (UPSs) of InP after 5 min of sputtering with 0.5 kV Ar⁺ ions. Plasmon and Auger peaks are not observed in UPS of un-sputtered InP surface with native oxides of In and P. Filled electron energy levels are not observed near the Fermi level from 5 min sputtered InP surface due to increase of ionization potential of nano In clusters.