掺杂P,Al和La元素的锂离子电池材料的微波合成研究

采用微波合成法制备了含掺杂P,Al和La元素的正极材料LiCoO2,确定了工艺条件,包括反应时间、微波功率和反应温度.采用XRD,SEM和电化学测试仪研究了添加元素对LiCoO2结构和电化学性能的影响.研究发现,微波功率和反应时间对产物的结构有比较明显的影响.充放电试验结果表明,掺加La元素正极材料LiCoO2首次充放电容量达到了130 mAh.g-1.     

锂离子电池正极材料LiCoO2的微波合成及结构表征

改变原料的Li,Co摩尔配比，利用微波法制备出锂离子电池正极材料LiCoO2，同时考察了微波辐照时间对反应体系温度的影响，并采用电子显微镜、红外光谱和X射线衍射技术对产品的晶体结构进行分析。结果表明，Li,Co的摩尔比的1.05:1时，所合成的LiCoO2晶体纯度高，具有良好的层状结构。与传统合成法相比，微波合成法具有反应时间短，能耗低，合成效率高，颗粒均匀性良好等特点。     

烧结温度对锂离子电池正极材料LiCoO2结构与电化学性能的影响

锂钴氧化物;烧结温度对锂离子电池正极材料LiCoO2结构与电化学性能的影响     

二次锂离子电池正极活性材料—LiCoO_2制备研究进展

本文简单对比了高温相 LiCoO2和低温相 LiCoO2的结构和电化学性能的差别，详细介绍了 LiCoO2的各种合成方法并评述了不同合成方法、反应条件对 LiCoO2结构、形貌及电化学性能的影响，并提出了今后研究的方向。     

微波合成法制备锂离子电池正极材料Li2FeSiO4

研究了一种制备锂离子电池正极材料Li2FeSiO4的新方法.采用机械球磨结合微波热处理合成了Li2FeSiO4正极材料.通过XRD、SEM和恒流充放电测试,对样品结构、形貌和电化学性能进行了表征和分析.与传统固相法合成的材料在晶体结构、微观形貌以及充放电性能方面进行了比较.结果表明,微波合成法可以快速制备具有正交结构的Li2FeSiO4材料;在650 ℃时处理12 min,获得了纯度高、晶粒细小均匀的产物,该产物具有较高的放电比容量和良好的循环性能.在60℃下以C/20倍率(电流密度,1C=160mA·g-1)进行充放电,首次放电容量为119.5 mAh·g-1,10次循环后放电容量为116.2 mAh·g-1.与传统高温固相法相比,微波合成法制备的材料具有较高的纯度、均匀的形貌和较好的电化学性能.     

微波合成法制备锂离子电池正极材料Li2FeSiO4

研究了一种制备锂离子电池正极材料Li2FeSiO4的新方法. 采用机械球磨结合微波热处理合成了Li2FeSiO4正极材料. 通过XRD、SEM和恒流充放电测试, 对样品结构、形貌和电化学性能进行了表征和分析. 与传统固相法合成的材料在晶体结构、微观形貌以及充放电性能方面进行了比较. 结果表明, 微波合成法可以快速制备具有正交结构的Li2FeSiO4材料; 在650 ℃时处理12 min, 获得了纯度高、晶粒细小均匀的产物, 该产物具有较高的放电比容量和良好的循环性能. 在60 ℃下以C/20倍率(电流密度, 1C=160 mA·g-1)进行充放电, 首次放电容量为119.5 mAh·g-1, 10次循环后放电容量为116.2 mAh·g-1. 与传统高温固相法相比, 微波合成法制备的材料具有较高的纯度、均匀的形貌和较好的电化学性能.     

微波合成铝掺杂钴酸锂材料及性能研究

以LiOH.H2O,Al2O3和Co3O4为原料,微波加热合成Li离子电池正极材料LiAlxCo1-xO2.通过XRD测试表征了不同Al加入量时合成产物的晶体结构,确定当x≤0.4时,产物为单一相层状结构.计算了不同x时LiAlxCo1-xO2的晶胞参数,随着x的增大,a值减小,c值增大.对合成LiAlxCo1-xO2样品进行DSC-TGA测试,结果表明,当x不同时,合成样品的热稳定性不同.SEM测试表明,合成晶体粒度较均匀,粒径在5μm左右.电化学测试表明,LiAl0.2Co0.8O2的电化学性能最好,首次循环放电容量为127mAh/g,多次循环容量损失率小于LiCoO2.     

LiCoO_2掺杂对锰酸锂结构和性能的影响

用固相反应合成了LiCoO2掺杂改性的LiMn2O4锂离子电池正极材料,优化了LiMn2O4的改性路径及制备条件.利用SEM、XRD对产物的结构进行了表征,并测试了产物的电化学性能.结果表明:所得产物均具有尖晶石型LiMn2O4结构.LiCoO2的掺入增加了尖晶石结构的稳定性,改善了尖晶石型LiMn2O4的充放电循环性能.     

晶体的择优取向与LiCoO2正极材料X射线衍射峰的强度比

采用高温固相反应法合成了锂离子电池正极材料LiCoO2, 用粉末X射线衍射(XRD)和扫描电子显微镜(SEM)等技术对材料的形貌与结构进行分析. 平面反射和透射X射线粉末衍射数据表明, 目前商品LiCoO2样品XRD图谱的(104)和(003)衍射峰强度比(I(104)/I(003))主要反映了LiCoO2晶体c轴方向的择优取向, 而不是Li、Co原子的占位有序程度. I(104)/I(003)比值越小, 晶体择优取向度越高. 晶体无择优取向LiCoO2粉末材料的衍射峰强度比I(104)/I(003) 应为95%左右. 因此, 不能用I(104)/I(003) 的比值大小作为实际LiCoO2材料晶体内Li、Co 原子排列是否有序的主要证据. 澄清了长期有争议的关于锂离子二次电池正极材料LiCoO2的X射线衍射峰强度比问题.     

氟磷酸盐及正硅酸盐锂离子电池正极材料研究进展

综述了用于锂离子电池的氟磷酸盐和正硅酸盐正极材料的研究现状, 重点对各种材料的结构及合成方法与性能的关系, 特别是对如何改善材料的电化学性能进行了总结和探讨. 展望了这两类锂离子电池正极材料的发展趋势.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.